Can I crop an image more than once

Once I commit to a crop in Expert can I crop it again?

peterjuliem72719006 a écrit:
Once I commit to a crop in Expert can I crop it again?
If you mean you can crop the already cropped file, yes.
If you mean you can try another different crop from the original picture, no.
In an editing session you can use the history panel to get back to the editing state before the first crop.
If you choose to 'open in ACR' (automatic if you shoot raw), the ACR edits are 'non destructive', you can always change the crop settings even after you have applied many adjustments with the various sliders.

Similar Messages

Does Muse optimize the original file because my images in a slideshow resize after I have used the image more than once.

iif I import a photo into my website and make it a small size then when I create a slideshow and add that photo from my computer it comes in too small every time. It's as though Muze is optimizing the original photo and that is very frustrating. I have to open that photo in Photoshop and save it again to fix it. Very annoying. Will this be fixed?

Muse does not touch the original image, but it does maintain an optimized copy of the original. You can verify by locking the original image file to prevent Muse from touching it.
Muse performs the optimization at export/publish time based on the largest instance of the image in the project. In this case, when you re-import the image, Muse is incorrectly assuming you want the new image at the same size as the first instance that you resized smaller. We'll look at fixing this behavior in the next release, but in the mean time there is a workaround.
Instead of opening the image in Photoshop and re-saving, which changes the modification date of the image and signals Muse to re-import the image, try double-clicking until the image is selected. The selection handles will be smaller and solid if you have the image selected. The handles will be larger and hollow if a container is selected. Then resize the image to the dimensions you want. Initially, the image will be pixelated because Muse is still using the previously optimized copy. However, if you choose File->Preview Page in Browser, the image will be re-optimized for the new dimensions and you should see a higher resolution version in both the browser and on your page within Muse.
You can more easily verify the optimization behavior as follows:
1. Place an image at 25% of its original size.
2. Select File->Preview Page in Browser, which will optimize the image at the 25% size.
3. Duplicate the placed image and resize the duplicate to be twice as big (i.e. 50% of the original). Initially, this duplicate will be blurry after the resize.
4. Select File->Preview Page in Browser, which will re-optimize the image and redraw at the higher resolution.

Opening RAW images more than once

I have run into an inconsistency between how Elements works on different computers. Even when students are using the same version, this is what I have encountered.
I want to create 3 versions of the same RAW file in order to vary the exposure and then use Photomerge Exposure to blend the images. I can open the first version and then go to Open Recent and open the same RAW file again. I then reset the default and make a different adjustment and open that image in Elements. a number "2" is automatically added to the filename. When I do another Open Recent and process that version, that image opens in Elements with a number "3" added to the filename.
Many students in my class can't do this unless they save the first version with a new filename.
Why might this occur?
Mary Lou

I can't say anything about Macs but I presume you would have noticed if the difference was due to the difference of OS...
When you have the 'include in Organizer' unchecked, you do your first edits in the ACR dialog and click 'Open' to get the conversion into the editor. The image title shows the file name of the raw file, but you are working on a psd format file which has not yet been saved to disk. It's only in ram memory with the default filename ready to be used if you click 'save' : that default filename is the same as the original raw name but simply with the .psd extension. You can change the default file name before clicking 'save' or 'save as' or you can accept it. Now, you can either go back to editing or close the raw file and re-open it. There is no difference. After your second edits, if you try 'save' you will be prompted the same default psd file name. But then the file name has already been attributed and you will get a warning message to change the name or overwrite the file.
If you try to use the 'include in Organizer', you'll see the difference : you won't be prompted to overwrite but a new suffix with -1 or -2... will be prompted automatically and the files will be added to a version set, which is the best way to keep the link between the original raw and the various 'versions' of edits.
By the way, that's one of the big advantages of the Organizer when you shoot raw : ability to see thumbnails of your raw files to rate and tag, ability to use all edit features of ACR and clicking 'Done' without creating intermediate psd or jpegs, only small xmp files saved automatically and used by the Organizer to show the files or print them... Plus if you are tagging and rating your raw files, that information is kept in every version in the version set.
You never worry about the xmp files when moving, deleting or renaming files from the catalog manager -- You never worry about them for backups.

Can't open Elements 8 more than once without shutting down the computer

After starting up my computer, I can open Elements 8 (organizer and/or editor) and work as usual. However, if I close the program, then check email or work on something else, and then I decide to open Elements again, I get the opening screen, click Organizer, and it just disappears. When I shut down the computer, it says there are programs waiting to close, but it shuts down quickly despite that. Once I have restarted, all is normal again, until I decide to open Elements twice.
I have Windows 7 professional.
Do I need to reinstall Elements 8?
Cam

It sounds like the Organizer and Editor aren't closing all the way, which makes it so you can't re-open them.
To know for sure if this is the case, after you close either program, open Task Manager (CTRL+SHIFT+ESC), go the Processes tab, click the option at the bottom to show processes from all users, and then scan the list for PhotoshopElementsEditor.exe and/or PhotoshopElementsOrganizer.exe.
If there, then that means they aren't getting closed.
As a temporary workaround until you find out why they won't close, you can end the process in Task Manager instead of rebooting the computer.
As for the cause, it is possible that something else you have running in the background, perhaps security software, is causing the issue. To determine if that's the case, restart the computer without any startup items or non-essential services, and then run Elements 8. Here are some instructions:
Windows 7/Vista: http://go.adobe.com/kb/ts_kb404913_en-us
Windows XP: http://go.adobe.com/kb/ts_kb404984_en-us
If you can close and re-open the Editor/Organizer properly without anything else running, then something was preventing the program from closing properly. Use a process of elimination to determine what; something similar to this method:
Open the System Configuration utility.
Re-enable approximately half of the items that were disabled.
Click OK, and restart your computer for the changes to take effect.
Check if you can close and re-open the Editor/Organizer.
If you can't anymore, open the System Configuration utility and disable half of the most recently enabled items.
If you can still, open the System Configuration utility and re-enable half of the remaining items.
Go back to Step 3, and continue dividing the items into halves until you have determined which startup item or service is causing the issue.
Once you have isolated the problematic startup item or service, contact its manufacturer for an update or configuration information, or leave it disabled.
HTH

Can't copy and paste more than once.

I open one image, make a selection, then copy that selection.
Now I open a second image and paste the selection into that second image.
When I try to paste into additional images, the Paste function is grayed out and I have to go back and copy again. I did not have to do this before.
Any suggestions?
Thanks,
Tony

Tony,
Please tell us your OS, Mac CPU, and version of Photoshop you're using. Also, image type. Did anything change on your Mac? Did you do any upgrades or other system changes?
Thanks.
Neil

Can someone register serial number more than once?

Hi I lost my ipod but I've registered online, can someone reset to factory settings and register the Ipod again?

They can restore the iPod and use it for themselves or sell it. It will work fine with another account and Apple will do noting to prevent that. If it still had a warranty they could go to Apple for warranty work.

Button/click box click more than once

Hi, I'm hoping you guys can point out what I'm doing wrong...
I have an image where the user can click on certain parts of
it to display a callout. However, I want them to be able to click
on the area of the image more than once if requried. I suppose you
can say it's a bit like an image map.
First I used click boxes to achieve this, then I tried using
transparent buttons. However for both of these methods you can only
click on each part once during playback. Clicking again does not
show the callout.
I thought about copying the contents to another slide and add
a 'Reset' button the user could click on. This would move to the
other slide, but this seems a bit on the 'clunky' side, so I
thought there must be a setting or something really obvious that I
have missed. I was unable to find the relevant informaiton in the
help file or elsewhere in the forum, so if it does exist I would
appreciate someone pointing me in the right direction.
How can I allow the user to click on parts of the image more
than once to show the callout?
Thanks for your help,
Liz

Thanks for your reply Rick.
I started the activity using rollovers, but I wanted the user
to do something more definite than just hovering over each part of
the image. So essentially, I want the rollover functionality but
with the ability to click instead of just hovering the cursor over.
I thought this would be easy!
I've tried using both buttons and click boxes without any
success. I ventured a little into slidelets, but I want the callout
to appear in a very specific place and this did not appear to
satisfy my requirements. The 'click to stick' sounds intriguing so
I'll take a look into this, but I'm not convinced it's what I want.
Any more suggestions are most welcome.
Regards
Liz

How do I repeat the same row more than once in report 10g

How do I repeat the same row more than once in report 10g
So I can print the bar code more than once
in report;
Edited by: user11106555 on May 9, 2009 5:50 AM

GREAT THAN X MAN
It is already working, but with the first ROW
select ename from emp
CONNECT BY ROWNUM<=5
ENAME
SMITH
SMITH
SMITH
SMITH
SMITH
ALLEN
WARD
JONES
MARTIN
BLAKE
CLARK
SCOTT
KING
TURNER
ADAMS
JAMES
FORD
MILLER
BUT I want this result
Item1
Item2
Item3
to
Item1
Item1
Item1
Item2
Item2
Item2
Item3
Item3
Item3

Calling thread.start() more than once concurrently

Hi, I got a simple doubt that may feel awkward or absurd to people who are well versed in the java threading concepts. I just thought of it and as I couldn't get an easy answer I am posting this.
Consider a class that implements the runnable interface. The run() method of the class is implemented with just a System.out.println(). If I make an instance of this class, say 't' in the main method and calling t.start() susequently twice or thrice; an illegal ThreadStateException will be thrown. The code snippet is as follows:
ThreadTest t = new ThreadTest();
t.start();
t.start();
It is understood that state of the thread object is changed to run state and so, if it is again started, it must be thrown. So if I put a Thread.sleep() inbetween these two subsequent calls assuming that the main method thread will be sleeping. So there is sufficient time for the first thread to terminate and then only the second will start - still the same exception is being thrown. I tried putting the synchronized qualifier for run too, still no effect - the same only happening. Why the java thread object is made in such a way that once the thread changes it state from Runnable to Running and then finally to dead state, it can be restated back to Runnable state, such that the start() method can be called again. Is it possible or not? Please post your comments.

As ejp says you can't start a thread more than once - even if it has already terminated after the first start.
By making threads a one-shot it simplifies reasoning about them: you don't have to wonder whether a second start() will work or not, depending on whether the thread has completed its first "incarnation". It also makes it easier to ensure thread resources are reclaimed. It also avoids semantic issues like whether anything about the thread is "carried over" across incarnations.
This might seem a limitation but there are many ways around it - simply don't let the thread terminate. Whatever control structure you would enforce by re-starting the thread can be emulated without letting the thread terminate in between "executions".

Can you create a form in which its never possible for the same person te sign the form more than once.

Hi, I've been looking into this for awhile and believe the answer is 'no' but was just wondering if anyone here would know of a solution.
The company I work for has a formulier on which a number of Excel files are placed. This form is then sent to a five (often different) people who are then required to open the Excel files and if accord to place their digital signature. We would like to make sure that no one is able to sign the form more than once and also if possible to make sure they have opened the Excel files. It would be great if anyone had any tips...
All the very best,
Martin Angell

I am not an Excel or Excel-to-PDF conversion expert, so I do not know how Excel forms are converted to PDF form fields. With this caveat here's what I do know.
In Acrobat It is possible to create a PDF form in which there are JavaScripts associated with fields (any fields, including signature fields). These JavaSripts can do a lot of things, including checking the signer's certificates on the already signed signature fields. Then you can make all unsigned signature fields read-only, in which case the user will not be able to actually sign them. After that you can overlay a button field on top of each unsigned signature field with exactly the same dimensions and associate a JavaAcript with this button field. This JavaScript would put up an UI asking the user for the signing certificate and its password, check this certificate's CN against the list of already signed signature fields and initiate the signing of the unsigned signature field behind this button if your condition is satisfied.
I never tried that myself but it could work. This looks complicated and it is but if you really want it you can try.

Can the same partner function be entered in the sales order more than once.

Hi
I know that as per standard same partner function cannot be entered more than once in Sales order.
If somebody has tried ways to do this please share.
THanks
Alags

Yes. You can have multiple Ship to Party, Bill to Parrty & Payer in Sales Order. But Sold to Party will have to Unique & single.
This functionality of having multilpe Partners is widely used & just follow as Deepak suggested above & you too can have multiple Partners of same type in single Sales Order.
But there has to be a strong Business case in doing so... say different Ship tp Party for different line items in Sales Order or different BIll to Party for some line Items in Sales Order.
Hope this helps,
Thanks,
JIgnesh Mehta

Hello, I have installed Reader, Adobe Acrobat, trial versions of Photoshop and Illustrator. Some more than once. They work for a few days at most then I am told to re-install. I cant look at any pdf file even though I can still see reader in my programs.

Hello, I have installed Reader, Adobe Acrobat, trial versions of Photoshop and Illustrator. Some more than once. They work for a few days at most then I am told to re-install. I cant look at any pdf file even though I can still see reader in my programs. What is going on and what can I do to fix this?

Unfortunately no, It says "Adobe not responding" as well when I try to open a pdf. It has done this a few times where I had to uninstall and reinstall. Also, Illustrator tells me to uninstall/reinstall as well.

Is there any way you can deautherized 5 computers more than once a year?

Is there any way you can deautherized 5 computers more than once a year?

Click "Support" at the top of this page, then click the link under "Contact Us"

HT201436 How can I listen to a voice mail more than once?

How can I likten to a voice mail more than once?

Don't delete it. Go back into your phone app, tap voicemail then hit play

How can I add the same song more than once?

how can I add the same song to my ipod shuffle more than once?

Thanks. I tested it, and found that I can create a bookmark in FolderA, and them manually copy it to FolderB, FolderC, and FolderD.
Once that is done, I tried the old method of "Bookmarks" --> "Bookmark This Page" and added it to FolderE. When I did that, it deleted the copy in FolderD but left the other three alone!
This is fine with me. I personally think this is a bug, because I don't think that Firefox should ever delete a bookmark without asking me (or at least, informing me). But now that I understand the algorithm, I can work around it. Thanks!

Can I crop an image more than once

Similar Messages

Maybe you are looking for