Can I cut a video into dozens of smaller ones?

Good day,
the effect I'm trying to get is really hard to explain,
the idea is that I'm trying to cut up this one big video into 2frame videos. Like this
Is there any action or chance that I can do it for all of the video and not do it by hand?
I've tried searching online, but I haven't found anything.
I'm using Premiere Pro CS6.
Thank you!

If you are covering the 26 frames that would have been shown on V1 that are below the 26 frame sections on V2, you don't have to remove the section on V1 - it will just be covered by the Video on V2.
Then you can do this:
Make a new sequence.
Put the complete clip that goes on V1 on V1.
Put the complete clip that goes on V2 on V2 (V1 is now hidden by V2).
Go to the effects pane Video Filters > Stylize > Strobe Light and apply the Strobe Light effect to the clip on V2.
Click on the clip on V2 to select it, and then click on the Effects Control Pane.
Set the Strobe Parameter to Makes Layer Transparent
Adjust the Strobe Duration to .9 and the strobe Period to 1.8.
Depending on the horsepower of your computer, you may have to render this effect before you can see it playback.
MtD

Similar Messages

  • How can I convert DVD- video into Apple's format so that it can be played and streamed from my Mac?

    How can I convert DVD- video into Apple's format so that I can play the content on my Mac and also stream it to my Apple TV? A few years ago, I transferred all of my home videos onto DVD but now would really like to put these onto my Mac and stream them through Apple TV to watch on the "big screen". Any advice would be most welcome!! Thanks

    MPEG Streamclip.
    Apple do not have their "own" format. You need to convert your DVDs to H.264 though.

  • I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this?

    I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this? I even tried deleting iMovie, bought a new copy and installed it, but the folder "iPhoto Videos" is still there and I can't get new clips loaded to iMovie, especially where I want them. Please help.

    The iPhoto Videos do occasionally have problems. I've seen a lot of people write messages to this Discussion group describing similar problems. The only thing that seems to get around this problem is to pull the video clips out of iPhoto then import them directly into iMovie. Once the troubles with iPhoto Videos starts, I haven't yet seen anyone write back with something that they did to fix it.
    The most difficult part of doing this is the movies in iPhoto might be a little difficult to track down. But you can create a smart alum that does that for you. Go to iPhoto > File Menu > New Smart Album:
    Set the first pulldown menu to keyword, second to contains, then in the last box type Movie with a capital 'M'. Then click OK. This smart album more or less does as search of the whole iPhoto Library and only displays items that match your search tearm of "Movie" exactly. In that smart album then you can find the original Movies you want to move out of iPhoto and into iMovie, <CTRL> click on the Movie clip, then choose Reveal in Finder. That will jump you out of iPhoto temporarily and into the iPhoto Library folder. From there you can move that movie file to the desktop. Move all the clips you want, once they're all collected up go to iMovie and go to the File Menu > Import Files. Then point it to the desktop where you moved your video clips.
    This will put all those videos into an Event folder in iMovie and bypass iPhoto Videos altogether.

  • Can u convert a video into just audio?

    can u convert a video into just audio so i can play it on my nano

    Hi,
    thanks Stefan Maric and wew64.
    in the RTPSocketAdapter.java of the 'Implementing Custom Data Sources and Media Handlers' example I can take the groups of bytes previous to they where send for UDP.
    My Idea its take this bytes, make groups of 259 bytes and send them over the ISDN. In the Clients side recover this information and make groups with the original size (that I must send with the video information over my ISDN connection) and send them with UDP to the same host and receive with a regular JMF application.
    I am not sure if I will have problems with the synchronize of the video and audio doing this process, any idea??
    Thanks a lot
    Ana Cristina

  • Can I turn greenscreen video into video with transparent background (instead of default black backgr

    Can I turn greenscreen video into video with transparent background to  overlay on another video in another program.  probably export as avi.     I know I can in after effects  but comfortable with premiere.   basically want to turn the greenscreen from a black to transparent background  ppro cs6     windows
    [ email address removed by forum host ]

    Harm is correct. It would be better to edit in the program where you keyed out the green. However, if you really must ...
    DPX is one file per frame. While you may not be able to open it from Windows, it is only because Windwos has not been told to open them in Photoshop.
    The whole point of the DPX file is to have a visually lossless storage of your frames that is designed to be used between applications (just what you want to do): http://en.wikipedia.org/wiki/Digital_Picture_Exchange
    However, if you prefer to use another option that you are more comfortable with, you can use PNG.
    Or...
    If you insist on a single video, use the Animation codec for Quicktime.
    In any case, you need a picture format or video CODEC that can store an Alpha Channel.
    Or.....
    Export the video with the black and use a Luma key in the next application.
    Or ...
    Export the video with the black, and then export a video of just the alpha channel as a blabk and white image where black is transparent when used as a track matte, and then in the next application use the video of the alpha channel as a track matte.
    Since you haven't said what the other application is or why you want to use it, we are having a little trouble offering a specific solution.

  • I have a canon vixia hf m41 camcorder; can i download my videos into i movie? thanks.

    I have a canon vixia hf m41 camcorder; can i download my videos into i movie? thanks.

    Have you tried iMovie or using the software that came with the camera?

  • I have a few videos in shared content...unfortunately not locally...not in icloud..how can I download those videos into my ipad

    When I click on photos
    I can see "shared"
    I have a few videos in shared content...unfortunately not locally...not in icloud..how can I download those videos into my ipad

    Those are the videos I have taken using my iPad
    Then later posted from my iPad
    they are now visible in "shared"
    later I think I cleared the iCloud backup
    Now they are not in iPad(local) and they are not in iCloud(remote)
    bvut I can see those videos in "shared"
    what is shared?
    when you clock on "photos" you will see three things at the bottom of the screen
    "Photos" "shared" "Albums"
    My videos are in "shared" I want to down load them locally into my iPad
    Hope this explains...
    many thanks

  • Imovie09 copies videos but doesn't import. how can I import my videos into imovie?

    imovie09 copies videos but doesn't import. how can I import my videos into imovie?

    Can you tell us what you actually mean by "iMovie09 copies videos but doesn't import"?
    If you have got your video into iMovie then it has imported it.Are you able to see your video in the Event Browser?

  • Cutting a Video Into Equal Parts: How?

    I'm looking to cut a video into equal one second parts. Help?

    Put the clip in the timeline. Move the playhead back to the beginning. Press Shift-right arrow. Press Control-V. Repeat until your hands hurt.

  • Can I place a video into a MUSE page?

    Can I place a video into a MUSE page?
    If not what is the best way to edit the page HTML to add it in code?
    thanks in advance,
    christos

    Hi Christos,
    Please check the following thread, that might be helpful
    http://forums.adobe.com/message/5210727#5210727

  • Is there any way I can convert previous apple accounts into my most recent one? As I have forgotten the older accounts passwords.

    Is there any way I can convert previous apple accounts into my most recent one? As I have forgotten the older accounts passwords.

    No, all content (music, books, movies and apps) bought from iTunes and App Stores using one Apple ID cannot be merged or transferred to another Apple ID.
    To retrieve your password.
    https://iforgot.apple.com

  • How can I divide a video into separate clips?

    I need to take video that I have been given and divide it into ten second intervals in order to collect data from each clip (for behavioral analysis and research). I know nothing about using video editing software but if I can learn how to do it right I will have a new job, so I really am motivated to learn!
    Thanks in advance,
    Sandi

    Maybe you dont have to :divide" it.  (eg cut it up into ten second clips.)
    Maybe a running clock super imposed onthe footage will be a better way for your goal.
    We can tell you how to do either...but you do need the basics * edit and application fundamentals)  before starting anything.
    Dont be daunted at the start. Its easier than it looks

  • I can't import a video into a specific album in iPhoto

    I recently imported a set of 14 photos and 1 video into iphoto. I got them all into the album i wanted except for 1 video. This single video can be imported to any other folder other than the one i want it to be.

    Just drag the video into the event you want. But better yet post iPhoto problems in the iPhoto forum.
    https://discussions.apple.com/community/ilife/iphoto

  • Can I turn a video into a picture with Photoshop?

    Can I turn a video on my computer into a photo?

    Yes, any frame of the video can be saved as a still image.

  • Can you add a Video into Fireworks??

    I wan't to do a YouTube outro and I need to add my previous video into the outro but I don't know if you can add a video if you can how do you do it please?

    No, you cannot do that. There is no video support in FW - the best you can do is to add a youtube iframe in the html code that FW generates.
    But if I understand you correctly, you wish to EDIT video in FW? No, also impossible. Premiere works, though.
    Fireworks is only for web graphics generation. You could create html as well, but that is to be avoided - use a html editor for that.

Maybe you are looking for

  • How to know that the purchase order link to which inbound delivery ?

    Dear Support , I am looking for one way which can check which purchase order ( only for trading goods ) link to which inbound delivery .... Now my way is use the purchase order number as a condiction to check in LIPS table , but i think this is a stu

  • IE7 Beta 3 not able to Read webhelp HTM

    IE7 is running fine on my WinXP Pro SP2 computer - except that it balks at showing any webhelp or webhelp pro HTM files that Robohelp X5 generates. If I upload the files to a server, then it shows them. I didn't keep careful history, but this didn't

  • FILTER ROW VALUE

    Hi All, I am trying to get resultset using 6 tables. I associating 6 tables and get the result. Here with i copied my query SELECT COUNT(DISTINCT(A.SERVICE_ID)), B.SERVICE_CODING_ID, C.SERVICE_RESOURCES_ID, D.SERVICE_ADNL_ID, E.ORGANISE_ID, F.RESOURC

  • Is there another place where a job log is stored other than dba_scheduler_job_run_details?

    We have a few jobs on the database that send weekly email alerts using UTL_SMTP. The contents of the alerts are just reports on some application tables. They were running fine until last week, when I ran a "set_attribute" command to change their star

  • Exchange 2007 - restored (merged) Mailboxes - Problem with items in Outlook

    Hey guys, last week we had to restore and merge our Exchange Mailbox Database. We had a running Database with data until Oct 14 and merged a recent backup into the User Mailboxes. Some mailboxes didn´t have problems, others have from then on doublica