Can I default the right country code in Click-to-C...

When I use click to call and say "call number" I always get a +44 country code as default. How can I make +31 the default country code instead of always have to search through the list of all countries?
This would make it so much more userfriendly. Any help is greatly appreciated!
Windows 8.1
Desktop Skype client
Click to call

I'm also having the same issue which has only been since changing laptops. Previously I could click the phone number within Salesforce.com and it will call by putting the local country code +61. Now with the new laptop, when I click to call, it calls via +64 which isn't a default anywhere.
This hhas now made making calls with Skype via SFDC impossible

Similar Messages

  • How to find out the user Country code in flex

    Hi all,
              I want to find out the country code, to load dynamic localization swfs.
      example : my swf file name
                     en_US_res.swf
    by using capabilities.langueage am getting the local user langueage, am not able to find the locale country code. please help me out
    Thanks!!

    Hi Jesudasan ,
    You can know the user details with version management.Please find the
    below procedure to know.
    Go to table->Utilities tab->version->Version management->Compare the previous one .
    Hope this solves the issue,Let me know if you have any issues.
    Thanks,
    Rajani

  • How can I get the right click to work in firefox -- it works in internet explorer

    how can I get the right click to work in firefox -- it works in interne

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • How can I know the right component for a transaction?

    Hi, I have a question
    When creating a new message in Solution Manager, notif_create, how can I know the right component given the transaction code or program name?
    Thanks in advance
    Edited by: María Valdés on Aug 19, 2008 6:25 PM

    Hello Maria,
    Well, in the Support Message window, place the cursor in Component box and press F4. This will brings up another window which contains the components list to which you are authorized. From that list you can choose about which component you want to create that particular support message.
    For example, if you are from Quality department, the following can be visible when you press F4.
    QM - Quality Management
      -- QM-ADB Adobe Forms
           -- QM-ADB-PRN Print Forms
      For the Print Forms, the component will be QM-ADB-PRN
    I hope it helps.
    Cheers,
    Satish.

  • Kids have disabled iPad now I can't put the right passcode in.I do not have a laptop anymore.

    Kids have disabled iPad and I can't put the right passcode in.I don't have laptop anymore.Will it give me chance to put it in?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT2712 Network ip address keeps changing and for some reason I can't find the right settings. The diagnostics says to check with my network  administrator,  but idk whom that is being at a motel and all. I have made. New locations, & changed the ipv4 addr

    Network ip address keeps changing and for some reason I can't find the right settings. The diagnostics says to check with my network  administrator,  but idk whom that is being at a motel and all. I have made. New locations, &amp; changed the ipv4 address. Help plz

    Hmmm, is Network set to using DHCP?
    Go to System Preferences
    Click Network
    Highlight AirPort and click Configure...
    Choose “By default, join: Preferred networks”
    Select your access point and Remove your access point with the minus button.
    Launch your keychain access in Utilities and delete your access point keychain entry.
    Reboot
    Go back to the “By default, join:” page and click the plus this time to add your access point. Enter the correct password, save, reboot.
    Instead of joining your network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed

  • When_window_closed can't determine the right parent

    I have a problem that the when_window_closed can't determine the right parent in de qms$window.when_window_closed procedure of headstart.
    In a form I have two windows. One is the parent window and one is a child window. After doing some changes in my parent window I navigate with a button (go_block) to this child window. When I want to close the child window, the child window thinks it's the last window and asks if I want to save my changes. If I say yes my changes are commited and if I say no both the parent and the child window are closed.
    A detail about the child window is: the child window has no key_based_link to the blocks on the parent window. I have a similar form with two windows but in this form the blocks are connect by a key_based_link in that form the child window can determine the parent window and does not ask if it has to save any changes.
    My question is: Does anyone know how my child window can determine the parent window, even though it's not connected with a key_based_link to the other block, so that when I close the child window I won't be asked to save any changes? In qms$window.when_window_closed the parent is determined but in this case it returns a null for it's parent.

    Some additional information, I checked the code of the when_window_closed
    and I see the following:
    -- this is part of the code in qms$window.when_window_closed who checks if the child window has a parent
    if name_in('system.form_status') = 'CHANGED'
    then
    -- my parent form has been changed so the form_status is changed and I will enter this part of the code
    l_group_id := find_group('CGSH$FORM_OBJECTS');
    l_parent_id := find_column('CGSH$FORM_OBJECTS.PARENT_NAME');
    l_child_id := find_column('CGSH$FORM_OBJECTS.OBJECT_NAME');
    l_count := get_group_row_count(l_group_id);
    for i in 1..l_count loop
    l_child := get_group_char_cell(l_child_id, i);
    if upper(l_child) = upper( get_view_property
    ( get_item_property
    ( name_in('system.trigger_item')
    , item_canvas
    , window_name
    then
    l_parent := get_group_char_cell(l_parent_id, i);
    -- l_parent is null ????? Should be a value, cause it's a child window.
    -- the only thing I can determine that de parent is null, is that the child window has
    -- no key_based_link with the parent window.
    l_last_window := (l_parent is null); -- l_last_window becomes true
    exit;
    end if;
    end loop;
    if l_last_window -- is true cause the parent id was null
    then
    if qms$errors.show_message('QMS-00158')
    then -- do you want to commit the change
    -- if yes then both my child and parent form are commited which I don't want yet
    commit_form;
    if name_in('system.form_status') <> 'QUERY'
    then
    go_block('QMS$TRANS_ERRORS');
    raise form_trigger_failure;
    end if;
    else
    -- if no then both my child and parrent form are closed and all the changes are discarded
    exit_form(no_validate,full_rollback);
    end if; -- show message
    end if; -- last window
    end if; -- form status 'changed'
    How can the child window, have a parent window which is null?
    And how can I resolve this problem? So that I have a parent window with a value?

  • How can i check the right list

    Hello, dear helpers,
    If the User has opend session.FindById("wnd[0]/usr/cntlCC_REP_****/shellcont/shell/shellcont[1]/shell") - This is the wrong list.
    and  the User has marked lines in the wrong list there is an error in this Code
    selrows = session.FindById("wnd[0]/usr/cntlCC_REP_****/shellcont/shell/shellcont[0]/shell").selectedRows
    error:"The control could not be found by id."
    How can i check the right list?
    look at shellcont[0]  / shellcont[1] in the code
    One solution is with "On Error Resume Next"
    but i looking for a direck Check, similar as
    myfindbyid= session.getFindbyIdName
    Regards,
    Emil

    Hello Emil,
    look here: http://scn.sap.com/docs/DOC-49101
    This solution describes how to check the existence of an object. On the one hand you can avoid the error message "control can not be found" and on the other hand you can check the using of the correct control.
    Hope it helps. Let us know.
    Cheers
    Stefan

  • How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first

    Please help!!
    How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first installation?

    Thank you for your answers, it helps me a lot.
    But sorry for my ignorance. I understand how you mean it, but I don't know how to do it. I'm scared to lose the settings/edits of the images.

  • Can't locate the right iPhoto Library

    I have a friend who can't find the right iPhoto Library.  Mac OS X 10.7 or 8...  latest iPhoto.  Searching in Finder for "iPhoto Library" produces no results, even though we see an iPhoto Library item in her Pictures folder (not the right one).
    So this leads me to believe that for some reason Finder won't display that....not sure why it would do that...but anyway.  She's a professional photographer, and doesn't know the name of most of the photos, because they are photos name by the camera.  She tried to find some with just the .jpg extension but everything was email or web based results that we found.  Thousands upon thousands.  This has happened before, and it was fixed, but we can't remember how. 
    Any help on how to locate the right version would be great.  Also, her Time Machine only seems to have the same one as in Pictures.  I think the iPhoto Library she uses is located somewhre else on the drive. 
    I also tried Locate and Find in the terminal, but neither brought up anything.
    Thanks in advance.

    Download and use  Find Any File to search for "Library6.iPhoto" which is a file in every iPhoto Library.  If there's another library on your hard drive FAF will find it as it can search areas that Spotlight can't.
    OT

  • I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email.  Now it won't let me do that and it syncs all my inbox.  How can I change it back to sync less.  I can't find the right place.

    I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email.  Now it won't let me do that and it syncs all my inbox.  How can I change it back to sync less.  I can't find the right place.

    I understand, as that was the place I would change it before 8.3 but now that option of Mail Days to Sync is not available?  Any idea why that would be?

  • How many times can you enter the wrong pin code on an iphone before it resets?

    How many times can you enter the wrong pin code on an iphone before it resets itself?

    Hey Robin.T,
    Thanks for the question. The following article provides the answer to your question:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    If you enter the wrong passcode six or more times, you'll see a message that says one of the following:
    iPhone is disabled
    iPad is disabled
    iPod touch is disabled
    You can also set your passcode lock to wipe the device after 10 unsuccessful attempts (Settings > General > Passcode Lock > Erase Data)
    Thanks,
    Matt M.

  • HT4539 I have 2 year old I-phone 4 that has never been updated. I need to download an update from my computer but can not find the right place on the I-Tunes page. Do you know where is the right place to update a phone that does not have an "update" butto

    My (old, never updated) I-phone has no "update" button in Settings and I would like to update it. I can not find the right place on I-Tunes to download the updates. Do you know where to look?

    Update your iPhone, iPad, or iPod touch - Support - Apple

  • How can i find the value category code in CJVC

    Hi Gurus
    how can i find the value category code in CJVC and which tables its stored.can any one tell me.please please

    Read TPIK3 in an internal table, then search COEP-KSTAR in this table, with KSTAR between TPIK3-KSTRF and TPIK3-KSTRT, and other keys like Controlling Area and application/component (eg "PS" in project-system as in CJVC or "PM" in Maintenance as in IW33, multiple application use this table). You can also use a FM like PS_FIND_ACPOS_FOR_KSTAR.
    Regards,
    Raymond

  • How can I check to see if there is money left on an iTunes card if I can't read the scratch off code?

    How can I check to see if there is money left on an iTunes gift card if I can't read the scratch off code?

    Sorry, but other than trying to redeem the card there's no way to check whether it is still valid or was previously redeemed.
    Regards.

Maybe you are looking for