Can I delete Original Media folder after its all been transcoded?

So i remember reading that most footage you import should be transcoded. Though Final Cut Pro "works natively with formats like h.264 and dslr movs, it is better to have it optimized into Pro Res and transcoded." Having listened to that, I have Optimized all of my media that I have importated however now I have double the media in my FCP Events folders because I have both Original Media and Transcoded media. This leads me to a few questions...
1) Can I delete the Original Media folder if all my my media is transcoded? How will this effect my timeline and projects? Will this free up space? How can I verify all of my clips have bene transcoded?
2) Can I delete the Transcoded Media and go back to using the Original Media? Will this mess up my timeline and projects that I have started editing or will it revert the media in my projects back to the Original? Which would run faster/better performacne Original Or Transcoded? I shoot all of my footage on a Canon 7d DSLR 24/30 fps 1080p, H.264.
3) What workflows have you used so that you dont dobule anything? If this project is a loss, what should I be doing in future events when importing? Should I send to Compressor and transcode there BEFORE I import into FCP. That way I am only importing the Transcoded stuff?
Thoughts?
Mike

1- Yes, you can delete the Original Media folder, FCP will only read from your Optimized Media folder then.  But move it to the trash first, then launch FCP X and test it out, before emptying the trash.
2- Yes, again, test it as I mentioned in 1 above.  Once you remove either Original or Optimized, it's gone, that's it.
3- Always let FCP do the transcoding, doing it in Compressor gains you nothing.  You shold base your decision to optimize on the hardware you're using and the amount of storage space you have available.  H.264 is super compressed.  ProRes uncompresses it and is more of it's natural file size.

Similar Messages

  • How to delete movies still in Original Media folder?

    Using iMovie 10.0.6 and Yosemite.
    I delete clips within iMovie in my Library view by selecting the clip and 'Move to Trash' (this as I go through all my clips to see what I want to keep and what I want to throw away). After selecting to move to trash, these clips then disappear from view when I am looking at my iMovie library, so that looks a-ok.
    However, when I look at my 'Original Media' folder within the iMovie Library folder (after selecting 'Reveal in Finder'), I still see these clips - as if they had never been deleted (and they appear to still be taking up space).
    I have emptied the Trash from the main Finder window, but these files are still there. I don't see them when loading my iMovie Library, so not a big deal in this regard, but just wondering why they are still there taking up space and appear not to be deleted.
    Related question - when I am left with a set of movie clips and I want to send someone else all the original clips to then create a movie, is the best way to find them in the Finder and copy onto another drive/folder and give to them, or to export directly from iMovie? (I would rather they have all the individual clips so better to play with, move around, fix dates, et
    Thanks-

    Thank you all,
    As the mailbox is enabled single item recovery.
    I just want to make the items neither in deletion folder, nor in purges folder.
    So I think there are two ways to achieve this.
    Method 1,disabled the single item recovery. then delete the items in deletion folder ,so it wouldn't enter to the purges folder, it just deleted permanently. then enable the single item recovery
    Method 2,delete the items in deletion folder,then the messages move to the purges folder, then delete the messages in purges folder.
    the Method 1 is not so good ,as it need to disable the single item recovery firstly, then enable  single item recovery .
    So I want to use the Method 2
    Please click the Mark as Answer button if a post solves your problem!

  • How can I delete a photo folder from my iphone 4s?

    how can I delete a photo folder from my iphone 4s?

    Hey Ravengirlaa,
    Great question! The answer is going to depend on how the photos were originally organized:
    A) The albums were synced to your iPhone from iTunes
    B) The albums were manually created on your iPhone from photos in the Camera Roll
    The following excerpt would apply for situation B:
    excerpt from page 71 of the iPhone User Guide - http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    If the photos were synced from your computer, please refer to this article (section "To delete photos and videos from your device"):
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    Thanks,
    Matt M.

  • HT2905 Can I delete albums in folder on hard drive

    I am trying to clean up harddrive space on my laptop, all my albums are in a MP3 folder and Itunes folder. Can I delete the MP3 folder?

    To be on the safe side use File > Library > Consolidate Files, you would then be certain that iTunes is only using the copies inside the iTunes Media folder and that any others were safe to delete.
    It's always a good idea to have a backup, particularly before undertaking any major organizational activity in case something goes wrong.
    tt2

  • I have duplicate pictures in "my catalog" that I believe come from two Adobe folders found under "my pictures/adobe/ one is Revel and the other is Photoshop express which preceded revel. Can I delete those two folder without causing a problem with my cata

    I have duplicate pictures in "my catalog" that I believe come from two Adobe folders found under "my pictures/adobe/ one is Revel and the other is Photoshop express which preceded revel. Can I delete those two folder without causing a problem with my catalog?

    Thanks for the links, Limnos.
    If you are willing to continue helping, here's what I found.
    Just to clarify the two iTunes folders I am refering to are:
    username-->Music-->iTunes
    HD-->iTunes
    I am presuming each location has a full set of files as outlined in the above links?
    Not all the files are in both locations. Most are.
    - The Itunes folder in my home folder does not have itunes library.xml.
    - The Itunes folder in my home folder has a subfolder called Mobile Applications (username-->Music-->iTunes--> Mobile application). The Itunes folder at the HD level also has a Mobile Application folder but it is a subfolder of Itunes Media folder (HD-->iTunes--> iTunes Media-->Mobile applications) and has no files in it.
    - I do not have an iTunes Media in the iTunes folder in my home folder.
    - also the Itunes media folder (HD-->iTunes--> iTunes Media) has subfolders by type (books, movies, itunes u, music etc...) but the iTunes Media-->Music also has some of the same subfolders ( iTunes Media-->Music-->books, iTunes Media-->Music-->Movies, iTunes Media-->Music-->iTunes U). Is this normal repetition?
    You say:
    /itunes/itunes media/ music
    but it is important to note what comes before all that.
    There is nothing as far as I can tell before that first forward slash. Since the only iTunes Media folder I have is in the iTunes folder that resides at the HD level (HD-->iTunes--> iTunes Media folder) not the iTunes folder in my home folder (username-->Music-->iTunes) , I assume that's the one that holds the music.
    Keep iTunes media folder organized and Copy files to iTunes Media folder when adding to library are both checked on
    Does that give more clarity into my problem?

  • No audio for some files in the Final Cut Event/Original Media folder

    Hi, recently, I noticed that some of the video files stored into the Final Cut Event/"Event"/Original Media folder had no audio. They do have audio when I read them into FCP X but not when I open them as ordinary files in the Finder. It worries me as it makes these files unusable in any other application, unless I "share" them from FCP X. It's no big deal but it's more work and on the principle, it's criminal: why FCP X would strip the audio off an original? Video and photo applications now work on the non-destructive principle!
    I usually shoot videos with a DSLR (Canon 550D/T2i) and a GoPro 3. It seems that the files impacted are the ones shot with the Canon and optimized for FCP X. The GoPro files are fine, optimized or not.
    Is there any solution to this problem or will I have to export the files from FCP X?

    Thank you very much for the info.
    I removed the Media Cache and Media Cache File folders.  Didn't seem to make any difference.  Also, there's no audio if I try to play it in Organizer.
    I have a question regaring "import".  What exactly does that mean?
    Since all my MTS files are on hard drive already, what I did was:
    1) Open a new project in PE9.
    2) In the "Organize" tab, click "Get Media"
    3) Choose "Get Videos/Photos/Audio from: Files and Folders".
    4) In the pop-up window, navigate to my folder and choose the existing MTS file.
    Was that called "import"?
    Thank you again!
    Michael

  • Help! FCPX is copying my media to the Original Media folder even though I tell it not to.

    I made the transition to FCPX several months ago and in the beginning saw no issue with the import process - FCPX would create aliases when asked during the import process and all would be well. Now FCPX insists on copying my media to the Original Media folder. It no longer creates aliases. This consumes my RAM, takes up hard drive space as the files are duplicated, and slows down my editing process. What am I missing? None of the options to copy the media are checked. I review this every time but each time I try to import without copying, transcoding or anything I still find that FCPX copies the media instead of creating aliases. Please advise... many thanks.

    What do you see in the import dialog? Is copy media grayed out? What preferences do you have set in importing? How are in importing? Drag and drop? Import window? What are you importing? Where are you importing from?

  • How can i maximize my battery life after its been damaged

    how can i maximize my battery life after its been damaged?

    Just like it had nevr been damaged; fully dischagre and charge monthly, minimize battery drain so you minimize charge/dischare cycles.

  • How can I delete my contacts folder in icloud?

    How can I delete my contacts folder in icloud so I can start over again?

    Got the answer from some other posts - thanks.  But now that I have resynced, and if I am backing up to my Mac not the icloud how am I keeping the contacts in icloud current with my Mac and iPhone and Ipad?  As soon as I turn contacts to sync on my phone it is turned off in iTunes.  Still on Snow Leopard and I think that might be part of the syncing problem

  • How can i open the directory/​folder and read all the files inside it in order and then close it?

    How can i open the directory/folder and read all the files inside it in order and then close it? any example would be nice.
    thanks

    In the File I/O>>Advanced File Functions Palette is a function named "List directory". This function will give you two arrays. One contains the names of all subdirectories the other the names of all files. If you want to sort them by name use the array sort function. If you want to sort them by another attribute use the File/Directory Info function to get more data. Use a cluster which contains the attribut to sort and the original index of the name. Then sort this array.
    Waldemar
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

  • What do i do with my downloads in my downloads folder after software has been updated? do i move it to trash? or??

    what do i do with my downloads in my downloads folder after software has been updated? do i move it to trash? or??

    So it would be safe to just delete them? the reason why i ask is because for example  when i first stared using youtube on my macbook pro(OSX Lion) it required the flash update. I updated flash but the download still remained in the download file on the dock. So it would be safe to delete once it was updated correct?

  • Can i edit a vector shape after it's been deselected?

    can i edit a vector shape after it's been deselected?
    the properties palette seems to loose it's values apart from density and feather. Can I not return to a shape to add rounded corners etc?

    That's because you're on the mask pane instead of the object properties pane in the properties panel.
    Look at the icons at the top of the panel that show different panes.

  • I can not find mozilla firefox folder in Start All Programs how can i open firefox in safe mode i am using win7 and firefox 4.ob10 ?

    i can not find mozilla firefox folder in Start>All Programs> how can i open firefox in safe mode i am using win7 and firefox 4.ob10 ?

    A quick workaround - Go to Start > Run, and paste this in the box: "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -safe-mode

  • HT1438 how can you unlock an iphone 4 after is has been disabled?

    how can you unlock an iphone 4 after is has been disabled?

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
         After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Can I recover my junk folder and its contents after I inadvertently deleted the folder, and then empties my trash?

    I inadvertently deleted my entire junk folder which contained some valuable messages. I then right clicked and deleted my trash. Can this junk folder or its messages be recovered?

    If your mail server has a browser interface (webmail access such as mail.google.com), do the messages show up there? Otherwise, there is probably nothing left to do.

Maybe you are looking for

  • Bw report as data source

    Hello toghether, Let's say we have a query on a cube and a lot of calculations made in the query. I have to load the results of the query into another BW project (cube). For the moment I create flat files from the query and I load them manually into

  • Print information from a row - Report Builder 3.0 - printer button option?

    Does Report Builder have any way of printing information from a row selection onto a page, rather than the whole report?  I don't think it has a print button option when you create the report? 

  • Premiere pro cc 2014 just abruptly shut down and now will not open my project please help...

    I am trying to open a project file that just abruptly shut down - "serious error occurred" and now my project will not open at all.  I have no idea what to do other than start over completely!!  Multi cam mix with camera over 1 and 15 minutes of vide

  • Hslider lables not located on right ticks?

    Please see attached file, Why the Labels are not on right ticks. <mx:HSlider id="hsView"    minimum="100" maximum="10000"  width="100%" value="500" visible="true"       tickValues ="[100, 500, 1000, 5000, 10000 ]" labels="[100 ,500,1000, 5000, 10000

  • Blue screen after log on shut down to protect computer.

    Can anyone help with my options. Im running windows vista.  Everytime i start my laptop after the log in screen i get a blue screen telling me my computer is shutting down for its protection. Wat do i do?