Can I delete software update files?

Hi,
I have found out some files call ADBEDRWVCS4LS1.dmg,ADBEFLPRCS4LS1.dmg,.... in my hard disk.
Are they important? Can i delete them?
Thank you.

You can delete them as long as you no longer need their content. If you double click them an installer should appear. Is this one you might need in the future to keep In backup?
If not, delete it. Note pkg files sitting in receipts folders are needed for repairing permissions.

Similar Messages

  • Bug: halt when deleting unneeded update files

    If WSUS installed on a heavy IO loaded harddrive (LUN) of a VM, when deleting unneeded update files by Server Cleanup Wizard, MMC node may halt.
    Server OS: Windows Server 2012 Standard
    Errors can be located in Event Log:
    An unhandled exception occurred and the process was terminated.
    Application ID: /LM/W3SVC/1881423753/ROOT/ServerSyncWebService
    Process ID: 3288
    Exception: System.NullReferenceException
    Message: Object reference not set to an instance of an object.
    StackTrace:    at Microsoft.UpdateServices.Internal.DataAccess.GetRevisionIdListForCache(Int64 deploymentChangeNumber, Int64& highestChangeNumber, CategoryIdCacheEntry[]&
    newCategoryDeployments, CategoryIdCacheEntry[]& deletedCategoryDeployments, RevisionIdCacheEntry[]& newRevisionDeployments, RevisionIdCacheEntry[]& deletedRevisionDeployments)
    at Microsoft.UpdateServices.Internal.RevisionIdCache.UpdateCategoryAndRevisionIdCache(Int64 deploymentChangeNumberAtRefresh)
    at Microsoft.UpdateServices.Internal.ServerImplementation.UpdateCache()
    at Microsoft.UpdateServices.Internal.ServerImplementation.DatabaseChangeHandler(Object byTimer)
    at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.TimerQueueTimer.CallCallback()
    at System.Threading.TimerQueueTimer.Fire()
    at System.Threading.TimerQueue.FireNextTimers()
    Application: w3wp.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: System.NullReferenceException
    Stack:
    at Microsoft.UpdateServices.Internal.DataAccess.GetRevisionIdListForCache(Int64, Int64 ByRef, Microsoft.UpdateServices.Internal.CategoryIdCacheEntry[] ByRef, Microsoft.UpdateServices.Internal.CategoryIdCacheEntry[]
    ByRef, Microsoft.UpdateServices.Internal.RevisionIdCacheEntry[] ByRef, Microsoft.UpdateServices.Internal.RevisionIdCacheEntry[] ByRef)
    at Microsoft.UpdateServices.Internal.RevisionIdCache.UpdateCategoryAndRevisionIdCache(Int64)
    at Microsoft.UpdateServices.Internal.ServerImplementation.UpdateCache()
    at Microsoft.UpdateServices.Internal.ServerImplementation.DatabaseChangeHandler(System.Object)
    at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
    at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
    at System.Threading.TimerQueueTimer.CallCallback()
    at System.Threading.TimerQueueTimer.Fire()
    at System.Threading.TimerQueue.FireNextTimers()
    Faulting application name: w3wp.exe, version: 8.0.9200.16384, time stamp: 0x50108835
    Faulting module name: KERNELBASE.dll, version: 6.2.9200.16384, time stamp: 0x5010ab2d
    Exception code: 0xe0434352
    Fault offset: 0x00000000000189cc
    Faulting process id: 0xcd8
    Faulting application start time: 0x01cdcff0fa98da3e
    Faulting application path: c:\windows\system32\inetsrv\w3wp.exe
    Faulting module path: C:\Windows\system32\KERNELBASE.dll
    Report Id: 332ed25c-3c39-11e2-93f1-005056b26389
    Faulting package full name: 
    Faulting package-relative application ID:
    Step to repo:
    1 Open Update Services MMC.
    2 Click Options from the left panel.
    3 Select Server Cleanup Wizard from the right.
    4 Press Next.
    MMC node MAY(only when lots of files need to be deleted) be prompted to be reset when deleting unneeded files if it's running longer than usual. Re-open Update Services MMC will fix it. But
    it will be appeared again another day when many unneeded files exist.
    Eternal Snow

    Nothing to me indicated that his previous disks weren't functional.
    In the very first two lines of the first post of this thread, the drive was described as "heavily loaded". Specifically the scenario was:
    If WSUS installed on a heavy IO loaded harddrive (LUN) of a VM
    Running the Server Cleanup Wizard, particularly performing the "Delete unneeded updates..." action is a highly database intensive action. If that task is competing for IOPS on the disk system, then there's absolutely a high probability that the task
    will "timeout" before the stored proc being called can complete it's task.
    The "fix" is to put the application on a properly equipped machine.
    If the guys who wrote the system can't create it to not fall over if the HDs it's on happen to be a wee bit slow, then yes it's a bug and they've written it badly.
    We're not talking about "a wee bit slow", though, are we?
    As for timeout issues, it's a natural artifact of a WSUS server these days. Read every tenth thread in this forum and somebody is having issues with timeout errors.
    There are two contributing factors. The first is that the number of updates currently contained in the MU catalog is about 100x the number of updates that existed when WSUS v3 was originally written in 2007.
    The second is that in 95% of the cases, the administrator reporting the issue failed to properly performed needed administrative and maintenance activities on the WSUS server over the lifespan of the server.
    Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2013)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence R Garvin
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • How can I delete an old file from my library on iTunes

    Occasionally I have to replace PDF manuals with ones that have been updated.  But after I sync the new file the old one remains on my Mac itunes library.  How can I delete the old file?  So far all I do is deselect the old file but it's still there.  Sooner or later there will be more old files then current ones making it hard to manage.
    Thanks in advance.

    You can do this with or without the iPad connected to your Mac.
    Launch iTunes on the Mac. Click on Books under the Library heading. Click on the PDFs. Then click on the PDF that you want to delete in order to select it, and go to Edit>Delete and follow the on screen prompts.
    if you are using iTunes 11 and do not have the sidebar enabled, and wish to do so, go to View>Show sidebar or use the keyboard shortcut OPTION+Command+S.
    If you do not want to enable the sidebar, the library items can be accessed in the button in the upper left corner of the iTunes window.

  • I can not perform software updates or download any programs. They appear in the download box as images that are not recognized. How can I fix this?

    I can not perform software updates or download any programs. They appear in the download box as images that are "not recognized". I thought maybe my antivirus software was setting up a firewall, but I have disabled it, so that's not the case. Any suggestions as to  how I can fix this?

    If the downloads are gone, it's possible that Windows is removing the downloads based on security policies set in IE. I realize that sounds strange, but it's related to Firefox's feature of submitting downloads to your virus scanner and marking them as having come from the internet.
    To test this theory, you could try disabling the scan feature. I assume you have good "real time" antivirus protection which checks every file saved to your hard drive. (If not, you really should get that, and you can use Microsoft's free [http://windows.microsoft.com/en-US/windows/products/security-essentials Microsoft Security Essentials] for now until you have time to review all the available choices.)
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''scan''' and pause while the list is filtered
    (3) Double-click '''browser.download.manager.scanWhenDone''' to toggle its value.
    Firefox now should ignore Windows' download security. Does it change how Windows handles the file?

  • Where are the software update files located?

    Because I get charged for my download traffic (don't ask--one of the drawbacks of living in the country), I set my software update preference to download the latest 10.5.4 update. That way I can then transfer the update file to our other computers. However, I can't find where Apple sticks the file.
    Thanks,
    John

    Hello John,
    That ability to "Install and keep package" in Software Update, doesn't work.
    It use to be an extremely useful thing, but now no longer works in Leopard. Instead you will have to download the Update from the Apple site and then you will be able to keep it, and only use Software Update to tell you want you need.
    In 10.3, not sure about 10.4 I could collect all packages, which I would then burn onto a CD. But alas, no more.
    roam

  • How can I delete hidden video files from the iPad?

    How can I delete hidden video files from the iPad?  These files were created on my MBA and when I changed the media type to iTunesU and then copied it to my iPad via iTunes, they did not appear.  I can see them using 3rd party software, but they don't have delete functionality.
    Thanks
    York

    Interesting note:  I can see the files when I use the search function, but when I tap either file, I return to my home screen.  The video does not open.  I can transfer the file to my MBA, and it plays fine, but I cannot figure out a way to delete them.

  • I can't find software update in general icon in the setting, what can I do

    I can't find software update in general icon in the setting, what can I do

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
        1.    Go into the iPad's Settings.
        2.    Locate and tap "General" from the menu on the left.
        3.    The second option from the top is "Software Update". Tap this to move into the update settings.
        4.    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
        5.    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
        1.    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
        2.    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
        3.    After canceling the dialog box, iTunes should automatically sync with your iPad.
        4.    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
        5.    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
        6.    From the iPad screen, click on the Update button.
        7.    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
        8.    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • Can't open Software Update, Disk Utility, or Repair Permissions

    Hello,
    I'm having some very strange issues with my OS 10.4.9. I can't open Software Update (it appears in the dock then disappears), the same happens with Disk Utility, and I can't install software. I know this is an OS problem as a tech support person at work was able to run these things successfully from the startup disk. This sounds like a corrupted preference file to me, but I'm not adept enough to know.
    Any help/feedback would be greatly appreciated.
    Thanks in advance

    Start with http://www.thexlab.com/faqs/multipleappsquit.html

  • Trying to use a new, larger external hard drive for my Time Machine backup.  However, every time I start the backup, it gets started then fails.  And, I can't delete the few files that did save on the external.  Sort of a catch 22.  Any ideas?

    Trying to use a new, larger external hard drive for my Time Machine backup.  However, every time I start the backup, it gets started then fails.  And, I can't delete the few files that did save on the external.  Sort of a catch 22.  Any ideas?

    Is it a USB hard drive?  USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice.  Double check your profiler to make sure that is not a problem.  If it is Firewire, make sure there aren't other firewire devices in use at the same time.  I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

  • How can I delete two .jpg files from my desktop that refuse to be deleted?

    How can I delete two .jpg files from my desktop that refuse to be deleted?

    The two icons refused to be moved to the garbage. The good part in all this is that ater I turned off the computer at night and turned it back on the next morning they were gone!
    Thanks.

  • How can I delete all the files in the Adobe CS4 Master Collection from my machine?

    How can I delete all the files in the Adobe CS4 Master Collection from my machine. I have tried Control Panel but it will not do anything, there are no error messages, it is like as if it is ignoring my instruction. Why should it be so difficult to delete programs one does not want. Any ideas please.

    Moved from Cloud forum to Downloading, Installing forum
    Try running the Adobe Cleaner Tool
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  • How can I delete a music file directly from iPhone? Or not possible?

    Can I delete a music file directly from iPhone?

    Not possible.
    Either unselect it during what it syncs, or manually manage > delete song.

  • Can I delete the PDF file's content in Adobe Reader plug-in?

    I create a plug-in for Adobe Reader, when I open the PDF file, can I delete the PDF file's content in the plug-in?

    The people here are visitors who might have knowledge and might choose to share it, if they have the time, and feel like answering a question. Your questions, instead, suggest that you think it is someone's job here to answer your questions. If you want it to be someone's job, you should raise a support case. This too will require patience.
    You will not welcome this advice, I am sure, but it is well not to try to use your own deadline to try to make other people feel the problem is more urgent to them.

  • Can not get Software Update to work in Mountain Lion, switches to App Store

    Can not get Software Update to work in Mountain Lion, switches to App Store

    Software Update is now in the Mac App Store...
    See Here  >  Re: Software update on Mountain Lion

  • Evernote: Can I delete the imported file???

    If you are a premium suscriber to Evernote, can you delete the original file (i.e., PDF, Excel, ...) that was imported into Evernote or do you need to keep it for future editing, sharing or such?
    It seems Evernote copies the imported file and puts it into the Evernote folder located in the hidden Library directory (user/home/library/application support/evernote).

    The people here are visitors who might have knowledge and might choose to share it, if they have the time, and feel like answering a question. Your questions, instead, suggest that you think it is someone's job here to answer your questions. If you want it to be someone's job, you should raise a support case. This too will require patience.
    You will not welcome this advice, I am sure, but it is well not to try to use your own deadline to try to make other people feel the problem is more urgent to them.

Maybe you are looking for

  • How to center flash movie in browser window

    Can anyone explain how to horizontally center my Flash movie in the web browser window after publishing? A bit of background: I was able to achieve this using <center></center> tags a few years ago. But I have since upgraded to CS5 and I understand t

  • After Feb 2015 CU viewing list items results in error : requested registry access is not allowed

    Hello All, We recently (Monday) updated our farm to the feb 2015 CU.  Since then we have been getting calls in from users that cannot access list items.  They receive a correlation error.  Looking at the logs the correlation error points to a critica

  • ADF FACES  showOneTab does not raise valueChange events

    Hello all, the next problem with showOneTab tag: when changing to another tab, the input components like inputText or selectOneChoice do not get notifications about value changes, so the changes get lost. Is it a bug, intention or one can do somethin

  • Need Help Urgently Zen Micro "Firmware Problem&qu

    Hello, I've had my Zen Micro for a year now and due to a "screw up" when i start my player it displays the error "Firmware Problem" and start up in recovery mode. When I try to reload the firmware the update application on my pc it says "Your player

  • Issues with Freight delivery charges when the PO is partially received

    We are having issues allocating charges for inventory valuation as well as rolling up total freight for payable invoices.  We will receive partial POu2019s (via inbound delivery) with related freight for that portion.  Then a couple of weeks later we