Can I delete table data with a change request?

Hello colleagues,
There is a table (T2502) that in production system has more data (not necessary)than in the dev system, and we have created a request with the same data from the dev system, that does not have this data, but i does not remove the data that is not necessary. I have tested and the inser procedure is working fine. Do you know if the system allows to copy the table from a dev to a prd system by a request?
Which should be the most appropriate way to do this?
I have checked in SE54, generated objects, and in the "dialog data transport details" it is set to "no, or user,recording routine".
Any idea?
Thanks in advance.

Moving the table by a transport request is better option.
Do u want the procedure of doing this...
Ur query is not clear at all. will u tell exactly wat u want to do..

Similar Messages

How can we delete the data in e-fact table.

how can we delete the data in e-fact table.

hii,
You cannot delete the request individually but you can one of the following:
1. Do a selective deletion from the cube. RSA1 -> Cube -> Contents -> selective deletion.
2. Delete all the data in the cube and then reconstruct only the required request ids. This would work only if you have the PSA available for all the requests.
3. Reverse posting is another possibility.
hope it helps,
partha

Delete Master Data - with or without sids

Hi
i am working on 0customer_attr
now when i right click and see master data it has 100 records
the same in r3 has 85 records.
so i thought i will try to delete master data and then load again.
so i right cick on 0customer and choose Delete master data.
now if i go back and see data for 0customer it still exists.
q1. what is the approach to delete and reload master data so between r3 and bw synchronization exists ???
q2. should i select with SIDS or without SIDS ???
how to rectify this error.
thank

Hi,
Q1..how can i find which transaction data is using those records ?
Doubleclick on the Master data IO. In the right pane you will find "Where-Used List" option. Click on that. It will give you the entire list of BW objects(DSO, Cube etc) in which your Master data IO is used.
q2. How can i delete transaction data
Right click on the Data targets(DSO, Cube etc) in which your master data IO is used, select the option Delete Data.
(or) Right click on the Data targets(DSO, Cube)>Manage>Select the Request-->Delete
q3. i dont see anything in psa,, it is master data so is that why there is no psa ??
Though it is a Master data, you should have loaded the data via DS so PSA will be there. It is possible that you might have deleted the PSA data.
Do one thing, delete all the Transactional Data(follow Q2 ans), then delete Master Data contents. Then do the loading again.
Hope it helps!
Regards,
Pavan

How can I delete old data in citadel

How can I delete old data from Citadel so that HDD is not full when data is continously being logged in the database ?

Hi there,
I could see different possible ways to limit the database size on a LabVIEW DSC system.
a) You could limit the lifespan of your logged data to a certain time by adjusting the option 'Days to keep historical data' in the Tag Configuration Editor>Configure>Historical... tab.
b) You could use the Citadel Database VIs. Archive Database.vi would allow you to archive a database or a part (certain traces/tags, or certain time interval) to another location. With the archive option 'destructive', it would delete the source of the data from the original database.
Delete Traces.vi would delete a traces from a database.
c) The same/similar functionality you can have throught the Measurement and Automation Explorer and its Historical Data Viewer plug-in
b) and c) are NEW features of LabVIEW DSC 6.1!
Hope this helps
Roland
PS: There is a nice link about archiving Citadel on ni.com :
http://zone.ni.com/devzone/conceptd.nsf/webmain/2F24997EAD7C53A686256B6E00686D64?opendocument&node=DZ52101_US

How can i delete app data on iPhone without uninstalling the app?

How can i delete app data on iPhone 4 without removing the application. Facebook application size -57mb. And its app data is 70mb

This is ridiculous!
Imagine this scenario, can't be that unlikely:
I'm going away on holiday, or away on work for a while, and I'm not taking the computer to which I sync my phone. Before I leave I fill my iPhone up with music to take with me. While I'm travelling I want to install a new app, but I don't have space. I look to delete content from the phone - I can delete podcasts but not music. Unfortunately I don't have enough podcasts to free up space that way. So I don't purchase the app I wanted.
This is bad for:
1. The user (me)
2. The app developer - lost download.
3. Apple - they lose their cut of the app download, and royally p#@* off a user.
Can someone explain to me why this limitation is good for anyone?!

How to export table data with coloring of cell according to value.

Hi all,
I am using jdeveloper 11.1.1.6
i want to export table data with lot of formatting. like with coloring of cell according to value and so many.How to do that?

Hi,
like with coloring of cell according to value and so many.How to do that?
Answer is, you can't
Frank

HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

You must remember the code, if you can't then take the phone and proof of purchase to an Apple Store.

How can I link table KONV with table VBRP and VBRK using KSCHL field?

Hi experts,
How can I link table KONV with table VBRP/VBRK using KSCHL field so that items are fully filtered?
Thanks,

Hi,
If you do not want to specify it as hard code, then define a variable for it if you want to pass the value for it from the selection screen so that it will be dynamic. Code will be as follows.
select-options: x_KSCHL for T685l-KSCHL.
select kwert
           kbetr
           knumv
           kposn
           kschl
      from konv
      into CORRESPONDING FIELDS OF TABLE it_konv
      FOR ALL ENTRIES IN it_all
      where knumv = it_all-knumv
      and   kposn = it_all-b_posnr
      and   kschl in x_KSCHL. "Dynamic Selection as per the selection screen input
endif.
Hope this helps.
Regards,
Chandravadan

"You can't compare a date with a number" in a formula that worked in Excel

I opened in Numbers an invoice file which was created in Excel. Formula returns hours worked. It has an "if" condition for the date field. I am assuming that that is the reason I get this "You can’t compare a date with a number because their data types are different." What do I do?
Formula reads =IF(SUM(A11)>0,(D11−C11),"") where A11 is a date and D11- C11 are times, ie 4PM and 5PM
Message was edited by: iamzoran

Jerrold Green1,
I agree with your words about using Sum with a single cell [have no idea why the "creator" of the file did that]; same for the parentheses enclosing subtraction. Yet cleaning it up as you showed me [=IF(A11>0,D11−C11,"") ] I got the same comment
"You can’t compare a date with a number because their data types are different."
Makes me think that t quinn is on to something with his "think the issue is with the expression ">0". Could it be that >0 is the number referred to and <>"" and ISBLANK are not numbers?!
z
PS: I am so happy that I am able to use Spelling and Grammar Checker with Safari on these posts. I was born and raise in old Yugoslavia and I use the Checker with all my emails etc and its a life saver. hahaha

Can I delete backup data from my old iPhone which I used to restore my new iphone 5?

My iphone 4S was stolen, and I had to get a new phone. I had all my data backed up on icloud and it was easy to set up my new iphone 5 and getting all my data back, however, I still have my old'd phone backup data on my icloud and it's been taking up space (about 4gb) of data. Can I delete this data? Will it delete my iphone5's data as well, as I used it to restore all settings?
Thanks

Welcome to the Apple Community.
You can safely delete the old back up now.

How can I get System dates with time scheduler using threads

how can I get System dates with time scheduler using threads.is there any idea to update Date in my application along with system Date automatic updation...

What the heck are you talking about and whatr has it to do with threads?
Current time: System.currentTimeMillis. Date instances are not supposed to be updated.

How can I delete a photo with the new update?

How can I delete a photo with this new update Photos?!

Use the View menu to switch to Photos (Moments window) if you aren't already there. Click on the photo to select it. Press the Delete key. Confirm.

How to fetch data for the Change Request in PROCESS_EVENT

Hi All,
I need to write some custom logic on Save/Submit button. For this I am planning to enhance the PROCESS_EVENT method of class CL_USMD_CR_MASTER. Within this method I need to access runtime data of the change request currently being processed.
I am going to create a post-method exit for this PROCESS_EVENT method. Is this correct?
I have heard we have APIs in MDG which can be used to fetch data, however I do not know how to use the same.
Can someone please help me with sample code how to fetch the runtime data of the Change Request
Thanks in advance.
Regards,
Vanessa

What MDG domain are you working on? What you are trying to do is called "reuse mode" enhancement and you do NOT want to tinker with the FPM feeder classes in this case. SCN document Configuration and Enhancement of SAP Master Data Governance contains many examples on how to achieve this.
This is a how-to document for MDG-M reuse mode enhancement: Extend MDG-M Data Model by a New Entity Type (Reuse Option)
This is a how-to document for MDG-C/S reuse mode enhancement: SAP How-To Guide: Extend the MDG Business Partner - Node Extension (Reuse Option)
Keep in mind, these examples are mainly for additional "master data" fields. If you need additional fields that are not master data but are more related to the Change Request itself, you should use this how-to document: Enhancement of the User Interface Building Block for Change Requests
Again, all of these documents can be found on the first document I referenced above. I suggest that you bookmark it.

How to delete the data based on concurrent request Id

Hi
from account receivable to gl i am posted a cheque through concurrent program.
right now my problem is I want to delete that data in database tables based on concurrent request id.
how to delete that data based on concurent request id, Please give me some suggessions

What is the application version ? what exactly you want to achieve ?
Direct deletion is not recommended in oracle application database.
regards,

My imessages have been hacked and recovery email changed and I can't delete it! (with pic)

My iMessages have been hacked and the hacker entered his email as the recovery email with security questions I can't answer. I contacted Apple support and went through the 24 hour process of changing my info so that I could get into the account, but his email address is still the recovery address and it does not give me the option to delete it. I've added alternate emails that can be deleted, but it will not let me change or delete the recovery email. I can change phones and passwords a million times, but if he can just recover my password what am I supposed to do? I have turned iMessage off on my phone (as well as the gps) but I would really like help in deleting that recovery email if anyone has any bright ideas! The pic below shows the only place in all of the settings that his email address shows up anywhere! Any help is very very very appreciated.

Hi,
I don't think that can be solved by any advice the regular posters could post here.
I would go back to Apple and explain the situation (again).
I would also consider closing the account (Apple rarely seem to do this as accounts are never deleted but just closed).
I understand this may cause issues for things purchased in iTunes and the App Store which my include Restoring the OS at some point.
8:20 pm Tuesday; September 16, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Can I delete table data with a change request?

Similar Messages

Maybe you are looking for