Can I deliver collected info as a pdf?

I would like to collect information from a user, including uploaded photos, in a skip logic format, then place that information into a pre-formatted document, and then deliver that document back to the user as a pdf. Is this possible with FormsCentral?

Sorry, this workflow currently isn't support by FormsCentral. The only workaround would be manual one. You would have to save the PDF from the response table and then manually email to the respondent.

Similar Messages

  • Best way to collect data from a PDF?

    What is the best way to collect 3 pieces of data that can be exported to Excel from a PDF that was created from a webpage?
    I thought about using a form, but I would need the form to stay with the PDF. Is it possible to attach a form that would open side by side with my PDF where I can type the data, then somehow export the data into Excel?
    Is it better to use insert comments, which looks like they can be exported as well?
    Many thanks.

    Hi,
    You could save your data using TDMS as well as ASCII to simply load it in another application later.
    Attached VI shows you how to save your data to a File after a certain amount of iterations, you can combine this then with your code and a timestamp.
    Christian
    Attachments:
    Save to new file every N samples.vi ‏20 KB

  • Can OBIEE deliver reports to email addresses of non-OBIEE users?

    We are considering using OBIEE, but one of our requirements is to be able to schedule and deliver basic reports (Excel or PDF perhaps) via email to a relatively large number of recipients.
    When I say "relatively large number" - what I mean is: more recipients than we want to buy licenses for. These recipients would not need or be allowed access to anything other than the scheduled report that we send to them on a weekly or monthly basis, so it makes no sense for us to buy licenses for them.
    But from what I can find so far, OBIEE only delivers reports to licensed users.
    Is there in fact some way to schedule and email reports to any (non-user) email address from within OBIEE?
    Or would I need a separate third party solution to accomplish this? (Any suggestions would be appreciated!)
    Thanks!

    If you store the ppl in a table (basically any datasource you attack with the rpd), you create a request pulling up all the targeted user, then in the "Recipients" tab of the iBot, you can choose
    "Determine recipients from conditional request"
    Then you specify the "Column Containing Recipients".
    Venakt wrote about it a while ago, as well: http://oraclebizint.wordpress.com/2007/12/28/oracle-bi-ee-101332-report-bursting-using-delivers-phase1-using-pipelined-functions/

  • Can Bridge CS5 Collections be shared across a server?

    I've seen versions of this question asked but have yet to find the answer.
    I have created manual collections in Bridge CS5 that I would like to share with other designers using the same server, thus saving them the time of also creating the collection. I have found that I can pull the collection file from my users/library and send it to them to add to their library, but the problem is if the collection gets updated other users will not see the updates without receiving a new collection file. Is there anyway the collection file could just live on the server and everyone share it? or some way that would produce that results I'm looking for?
    Thanks for any help!

    I've seen versions of this question asked but have yet to find the answer.
    That's because I think there is no satisfying answer to this question I'm
    afraid...
    A collection is not more then an alias of the files on the location and
    still user specific, so altering the collection on one system user will not
    automatically update that info to the other user of the server location.
    Ideally that should happen but Bridge is to my knowledge yet not designed
    for use on a server and Adobe does not support working over a network
    because there are to many variations and possibilities in networks. At least
    that is what I always have understood from previous talk about network and
    server use.
    Some succeed in using Bridge over a network (the image archivist is a well
    known example of that) but it takes a lot of discipline and knowledge to
    achieve this. But I can't imagine it is possible to reach this with a
    collection.
    In CS4 you could have tried the use of Version Cue but they discontinued
    this option in CS5. Maybe rating and labeling, renaming and the use of
    subfolders in a main folder will work but I have no access nor experience
    with working over a network.
    Theoretically have all users point to the same main folder adding a new
    folder should automatically update in the content window of other users.
    However as said, this is in theory and you should have a clear convention
    about who is doing what or able to change things. Do a search for the Image
    Archivist on this forum or try his blog:
    http://imagearchivist.blogspot.com/

  • Collect Feedback workflow with pdf documents

    Hi,
    Is it possible to incorporate collect feedback workflow with pdf documents ?
    Thanks
    techie

    Hi,
    According to your post, my understanding is that you want to incorporate collect feedback workflow with pdf documents.
    Before you add a workflow, you plan where you want to add it (for a single list or library, or for the entire site collection) and the details of how it will work.
    If you want to add the pdf documents to a library, you can add the collect feedback workflow for a library. Please refer to:
    https://support.office.com/en-ie/article/All-about-Collect-Feedback-workflows-a0fd6fc5-0625-4aef-a41f-40aadbc9d946#add1add
    If you want to make the pdf documents as a template of a content type, you can
    add the collect feedback workflow for a content type. Please refer to:
    https://support.office.com/en-ie/article/All-about-Collect-Feedback-workflows-a0fd6fc5-0625-4aef-a41f-40aadbc9d946#add2add
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • TS3276 I can't attach a scan in the .pdf format

    Hi, everyone!
    I can't attach a scan in the .pdf format to e-mail message. It didn't happen before tonight.
    Any idea what's causing it and how to fix it? My info:
    OS X Lion, Mac OS X v10.6
    Thanks a lot!
    Vera

    One solution.
    https://discussions.apple.com/message/8310473#8310473

  • Can I sync my microsoft word and PDF files on my palm?

    I am new to the Plam family and I have a question.  I use my Palm for bussiness as I'm sure most of us do, however can I sync my microsoft word and PDF files into my palm?
      I use contract all the time and I need to view a contract from time to time, I'm not sure how to sync these files on my palm... is the palm windows mobile?
    If I could get as much info as I can about this all the how to's that would be awesome!
    Thanks and I greatly aprecaite it!
    Paul
    Post relates to: Pre Plus p101vzw (Verizon)
    This question was solved.
    View Solution.

    Hey Paul welcome to the Palm forums.
    Your Verizon Pre Plus runs a mobile operating system called HP/Palm webOS.  The current release is 1.4.5.  The phone can connect to a corporate Microsoft Exchange server.  When it does, it uses a sync technology called "Exchange Active Sync," but your phone does not run the Windows Mobile or Windows Phone operating system.
    Syncing Microsoft Office and PDF documents has been sort of an adventure since the Pre debuted over 18 months ago.
    DataViz, the makers of the Doc View application, was partially acquired by RIM, the makes of the BlackBerry, and have decided to not release a full version of Documents To Go for webOS devices.  Palm is working with the makers of QuickOffice to bring full Office document support to webOS in the future.
    For now, if you put Office documents and PDF files in the USB storage area of your Pre, Doc View or PDF will find them and allow you to view them on your Pre.  I put all of my documents in a folder simply called "Documents".
    If you connect the charging/sync cable to your Pre and then attach it to your Mac or Windows PC, you will be given a choice to turn on USB Drive mode.  When you do, you will be able to work with your Pre like you would a standard USB flash drive.  Eject the Pre from your PCs desktop when you are done and you should be all set.
    Hope that helps.
    Alan G

  • How can I digitalize a document text in PDF and export it to WORD?

    Anthony
    How can I digitalize a document text in PDF and export it to WORD?

    If you already have a PDF document, ExportPDF can help you with this task. https://www.acrobat.com/exportpdf/en/convert-pdf-to-word.html
    On the other hand, if you have a physical document, you'll need to scan it into a PDF document first.
    Depending on what you need to do you may require different tools & services, so please help us out with more details.
    Vlad

  • How can I publish my Visio project to PDF including active CommandButtons (VBA)

    Hi everyone,
    First of all, I am new on this forum and a rookie when it comes to Visio and creating PDFs, that's why I need some help. The Visio project where I am working on, is part of my assignment. I am hoping that you could help me.
    I am creating an interactive system for employees with Microsoft Office Visio 2007 that shows flowcharts of procedures and work instructions. Now I created multiple pages and I added hyperlinks (to switch to different levels) and simple CommandButtons (Microsoft Forms 2.0 CommandButton) that show UserForms, which I created in Visual Basic Editor. When I click the CommandButton in the project (on Fullscreen) the UserForm appears.
    For the CommandButtons I added this code:
    Private Sub CommandButton3_Click()
    UserForm4.Show
    End Sub
    This document I created needs to be a controlled document and it should be published in PDF. I know that Visio already has a plugin to publish PDFs, but when I use this option, my project (in PDF) does not show active CommandButtons (where I can click on in order to open my UserForm). Though, the hyperlinks I created, DO work. Do I need to change the VBA code for my CommandButtons or my UserForms, so that I can open my UserForms in the PDF- file? If the answer is 'yes,' does anyone know the code I need to add?
    I also would like to know how I can make my Shape ScreenTips visible in PDF? Do I need to add 'User defined cells' in order to do that or do I need to change something in the Miscellaneous section?
    Many thanks!
    PS: I have enclosed a picture how it should work. You can see one page with a opened UserForm on the lower right. This result (or something similar) I would like to see in the PDF- file.

    You cant transfer interactivity to a PDF when you print to PDF as you have written.
    PDFs have to be exported so that interactivity will live inside the PDF. Of course you have to set up links in the Hyperlink Panels.
    But not every reader is supporting interactivity. URL are supported from Reader and Apple iBooks. But you can't force the user to use a certain application anyway.

  • Can SAP R/3 system read a PDF file without XI as middleware?

    Hi Experts,
         There is a requirement where an SAP R/3 system needs to read contents of a PDF file. The file is supplied to R/3 system from an application server. Is it possible to read contents of a PDF file by a SAP r/3 system without middleware like SAP XI? If possible what might be the general steps of doing that? Secondly is it possible for XI to read contents of a PDF file format which has data in form of CSV within it?
    regards
    Anupam
    Edited by: anupamsap on Feb 16, 2011 1:12 PM

    >>Secondly is it possible for XI to read contents of a PDF file format
    Yes,Write a custom adapter module for sender file adapter.
    Use itext libray
    http://api.itextpdf.com/
    check this blog.(writing to PDF )
    http://wiki.sdn.sap.com/wiki/display/XI/CODE%20-%20Create%20a%20PDF%20File%20via%20the%20iText%20Library
    you can write the code to read the pdf.
    Hope it helps

  • I had a power mac g4 into which i put 3, 320 gb PATA hard drives in a raid slice config so that it worked as one drive needless to sat that i lost the g4 to a surge but the drives are good. now i have an imac, how can i recover the info off those drives

    i had a power mac g4 into which i put 3, 320 gb PATA hard drives in a raid slice config so that it worked as one drive needless to sat that i lost the g4 to a surge but the drives are good. now i have an imac, how can i recover the info off those drives. can i put the drives in external cases and plug them all in, will the imac see them as a raid slice then  help please

    Before you have another accident:
    Buy a UPS of good quality and sufficient to your needs.
    I would have to assume that the drives were connected to a PCI PATA card, hopefully. Otherwise, well RAID and having drives on the same bus (master and slave).
    And no backup, none at all...
    Get your hands on a G4.
    Data Rescue 3 from Prosoft maybe.
    If they were SATA and running on PCI SATA controller, very popular and common really in G4s, more options would be open.

  • I have an ipad and iphone synced to the same windows pc, my pc died and i bought a new one can i restore the info on my idevices to my new pc?

    how can i get the info on my idevices over to my new windows pc, i didn't upgrade to ios 5 so i don't have them set up with icloud yet. also on my old pc i was using outlook now I'm planning to use thunderbird. is thunderbird compatible with the idevices or should i use windows live mail instead?

    Oh nice, there's a PassKeeper application for the iPhone and iPad.  Simply install it and it should talk you through steps, otherwise their website is probably a great place to check.
    http://itunes.apple.com/us/app/passkeeper/id405021740?mt=8
    I really like the application 1Password, and it works across all the products, Mac, PC, iPad, iPhone.

  • How can I export Faces info from one library to another?

    How can I export direct from one Library to another? Currently I am exporting to desktop and then importing to alternative Library. This works including file name and description. However Faces info is lost. How can I retain Faces info?

    It is not possible to "export" face information - there is no defined place to put it
    You can use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -  to move photos between libraries including the full metadata
    LN

  • I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team.  I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where

    I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team.  I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where I do not have a Wi-Fi connections.  I need to be able access files without going to acrobat.com.  Help!!!@

    Post the PDF files to a web site. The browse to them in Safari on the iPad.  When you Open the files specify the Open to occur in Adobe Reader.  Then you can have/Save them in your Documents folder on the iPad.   An iPad has limited access to files otherwise.

  • How can I export an hatched font to pdf?

    Hi everyone,
    I've dowloaded an hatched font from a website. Urban Sketch.
    It's an hatched font with a jpeg texture.
    It's well rendered in numbers.app, well printed but I can't succeed to get a good pdf export. (the texture disapear from the font )
    Could you help?

    1) Try copying the items, then opening the application preview and create a new document from the clipboad (menu item "File >New Document from Clipboard").
    2) Try exporting to PDF (rather than printing) with the best quality:
    select the menu item "File > Export…"
    Then select PDF and best quality:

Maybe you are looking for