Can i design for failover/replication using a Veritas/EMC plugin to iPlanet Dircetory Server?

I am re-designing our current architecture. We are using a Veritas plug-in to failover our Directory server(4.1). Now we are thinking of moving to the following type of architecture : A master-consumer pair on one site and a single failover consumer on the other site. We use DS mostly for authentication. This involves 3 reads and a write in a single transaction to the directory server. Can Veritas support write failover by bringing up a separate server on the 2nd site ?
Thanks

Agreed. However, since the secondary consumer is also pointing to the primary master would I not be correct in assuming that writes would still work ?
Also if the primary master fails, and assuming the primary and secondary consumers are still active, the consumers should be able to now point to the secondary master brought up by Veritas.
Thanks

Similar Messages

Can I Design a Forum with using web dynpro for java?

Hi All:
Can i design a forum with using web dynpro for java?
I want to design an application like a simple forum which maybe has many replies.So if i use
the UI technology "web dynpro for java", i will to create UI elements dynamically.How can i control this
dynamical UI elements to keep layout ?

Hi,
yes you can do that....
for exaple if you observe SDN...
you can imagine like....
A big Transparent Container(TC)....
Inside that number of other TCs(depending upon the question nd its replies...)....
In side each TC, again around 9 UIElements....
one for menioning what is the question/reply?
other for your description of question/reply...
other for your name,
displaing your fourm point... etc...
So it will be
for(loop till your (Question+No of replies))
Create Transparent Container....
Add Childs to the Container...
Decide your layout....
In case if you want to know how to create UIElements dynamically....
http://help.sap.com/saphelp_nw04/helpdata/en/4f/07cf3dd28b5610e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/dynamic%2bui%2bgeneration
Regards,
Srinivas.
Regards,
Srinivas.

How can I launch a site that I designed for a client using their MobileMe account? Can they 'open' my iWeb files on their iWeb software?

How can I launch a site that I designed for a client using their MobileMe account? Can they 'open' my iWeb files on their iWeb software?

If you give them the Domain.sites2 file that iWeb used to create the site they will be able to open it with iWeb application (it has to be the same version as you have) and make changes. But if you're expected to also make changes you'll need a way to send that file back and forth between the two.
Also there's an online MacWorld article that describes a way that both of you could manage the site using Dropbox. Look at Managing an iWeb site from multiple Macs.
OT

How can i design a smart antenna using labview?? plzz

i have my final year project. I am student of Beng in Telecommunications. How can i design a smart antenna using switched beam algorithm on lab view??

You can hardly use LabVIEW to design antenna, but definitely can use LabVIEW for Characterization, Optimization, and Test your antenna design.
Hope you got the point here.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

How can I design and send emailers using Adobe Muse?

Hello Geeks,
How can I design and send emailers using this wonderful software called Adobe Muse?

Hi
Are you referring , creating email templates or sending marketing campaigns ?
We cannot create templates as Muse doesn't output HTML optimized for e-mail output.
Regarding email campaigns, you can setup this from hosting platform end.
More details :
https://forums.adobe.com/message/5469744
Re: Is it possible to create email templates using Muse?
Thanks,
Sanjit

Can Numbs app for iPad be used for iPhone and iMac?

Can Numbs app for iPad be used for iPhone and iMac?

I assume that you mean Numbers, in which case the iPad version can be used on the iPhone (if you've got the current version of Numbers then you will need iOS 5 on your iPhone). It can't be used on your iMac as that is a different operating system, you will need the Mac OS X version for that - but you can use spreadsheets created in Numbers on the iPad in Numbers on the Mac and vice versa.

Are there any known issues concerning using DIGEST-MD5 SASL authentication with iPlanet Directory Server 5.0 on Windows NT 4.0?

I am developing support for the DIGEST-MD5 sasl mechnism on a c-ldap client. I am using the evaluation version of the iPlanet Directory Server 5.0 which lists DIGEST-MD5 as a supported SASL mechanism. The server is running on NT 4.0 After installing the Directory Server with the test database, a changed the passwordStorageScheme from the default of SSHA to clear text. I then added my test user. When I run my test I always get back a resultCode of 49 (invalidCredentials). The digest-challenge I receive from the server and my digest-response are shown below. I have satisfied myself that the calculation of the response directive in the digest response is correct. Does anyone see any problems in the digest response or have any other suggestions? Is there a known problem with the iPlanet Directory Server 5.0?
digest-challenge:
realm="BGB2.ndp.provo.novell.com",nonce="Ed8UPLXsWaC6CN",qop="auth",algorithm=md5-sess,charset=utf-8
digest-response:
username="uid=bgbrown,ou=people,dc=siroe,dc=com",realm="BGB2.ndp.provo.novell.com",cnonce="A9IuPJKr30RiwL",nc=00000001,qop=auth,digest-uri="ldap/BGB2.ndp.provo.novell.com",response=97061205298e5ebaf206c8ac3598fdce,charset=utf-8,nonce="Ed8UPLXsWaC6CN"

Found the answer. When the username is an LDAP DN it needs to be proceeded by "dn:".
example: username="dn:uid=bgbrown,ou=people,dc=siroe,dc=com"
The server also accepts a simple uid value.
example: username="bgbrown"

How can i design a EJB application using session Beans?

Hello,
I am designing a Find application using EJB. Here a user is prompted a search page, where he can enter the search criteria's. Then on click of submit, the query is formed at the server side depending on what criteria's were selected. Then a jdbc query is performed and the results are returned back to the user. Here no session is maintained for the users. Can anyone suggest me how to design this application using EJB. Should i use entity beans for this or session beans will suffice? Should the jdbc query be performed in the bean itself or should it be outside in a helper class? Please kindlu suggest me the design for this application...
Regards,
Subbu

Hi,
First of all, I'm unable to figure out why you need to use EJB for this scenario. You can write a helper class to frame and execute the query.
If you really want to use EJB, then I suggest you use a stateless Session Bean with transaction attribute as TX_NOT_SUPPORTED. From the session bean, you can call the helper class. But, by avoiding the session bean, you can eliminate remote calls, thus improving your performance. Also, check if the database & the db driver you are using supports sql caching.
Regards,
Raj.

Can we design the BPEL process using API's instead of JDeveloper

hi' All,
I might be sounding funnny, however I would like to know "Can we design the BPEL process in 11G from scratch using API's instead of JDeveloper"
and is there some tutorial which talks about how to do this.
thanks
Yatan

Hi,
Designing a BPEL process without JDev will not be a good way to go, but you can deploy the process without JDev and also can change the dynamic parameters while deployment. For that you, need a separate ANT script. For Prod Env this is a very common thing.
~
Joy

How to pay for icloud? I no longer trust apple with my credit card. How can we pay for icloud without using a credit card?

Having had recently a problem with my credit card with itunes (the only place I ever used that particular card), and several fraudulent charges, I no longer wish to give my credit card information to itunes or any other apple outfit. Can we pay for icloud by cheque, or money order, or some other way, perhaps a bank account where I would leave just enough money to cover the payment. This would be the only I would pay for icloud. Please let me know. thanks.

See here:
http://support.apple.com/kb/HT4874
iTunes Store credit or gift cards cannot be used as a form of payment to upgrade your iCloud storage (payment methods accepted include credit and debit cards).

Can i design a touch screen using just labview, i mean creating a vi and running it???

i juust want to design a touch screen using ñlabview, canbe a calculator program whit labview

I guess it would depend on the type of touch screen and computer that you are using. I don't have a whole lot of experience with touch screens, but isn't touching a touch screen equivalent to clicking a mouse button with a normal screen??
If this is the case, then if the operating system on that computer is supported by LabVIEW then it should definitely work. All you would need to do is build the LabVIEW program like normal, and put it on the touch screen computer.

Can i design for all android tablets using one size folio?

I want to minimize my production workflow. Of course. Will a one size design folio work for all android tablets including kendal fire?
thanks

Yes, you can use one folio size for all Android devices. A 16x9 aspect ratio usually works nicely if you are only interested in Android devices and don't already have an iPad design.
Note that we do not support in-app purchase on Kindle devices.
Neil

Can I design a SOFS-cluster using non-clsutered storage?

Hi.
I've been trying to figure out if I can build a SOFS-cluster with 4 nodes and 4 JBOD cabinets per node for a total of 16 cabinets, like this:
I haven't seen this design though so I'm not sure if it's even possible and if it is, what features do I lose (enclosure awareness, etc)?
Thanks.

Yeah, I was in a hurry when I posted my initial question and didn't explain my thought process clearly enough.
Are you saying that you can't build a unified CSV namespace on top of multiple SOFS-clusters, despite MSFT proposing this exact design at multiple occasions?
As for building one-node clusters; it's certainly possible, albeit a bit pointless I suppose unless you want to cheat a bit like I did. :)
The reason I'm asking about this particular design is that the hardware vendor that the customer wants to use for their Storage Spaces design only supports cascading up to 4 JBOD-cabinets in one SAS-chain.
As their cabinets only support at the most 48 TB per cabinet and the customer wants roughly 220 TB usable space in a mirror config that gives us 10 cabinets. On top of this though we want to use tiering to SSD and with all those limitations taken into consideration
we end up with 16 cabinets.
This results in 8 server nodes (2 per 4 cabinets) which is quite a lot of servers for 220 TB of usable disk space and hard to motivate when compared to a traditional FC-based storage solution.
Perhaps not the cost, pizza boxes are quite cheap, but the rack space for 8 1U servers and 16 2U cabinets is quite a lot.
I'll put together a design based on these numbers and see what the cost is though, perhaps it's cheap enough for the customer to consider. :)
Thanks for the feedback.
1) I'm saying we did not ever manage to have unified namespace from multiple SoFS with no shared block storage between all of them, we did not find any references from MSFT how to do this, we did not find any people who had done this either. If you'd search
this particular forum you'll see this question asked many times but not answered (we also did ask). If you'd manage to do this and share some information how I'd appreciate this as we;re still interested. See:
SoFS Scaling
http://social.technet.microsoft.com/Forums/windowsserver/en-US/20e0e320-ee90-4edf-a6df-4f91b1ef8531/scaling-the-cluster-2012-r2
SoFS Architecture
http://social.technet.microsoft.com/Forums/windowsserver/en-US/dc0213da-5ba1-4fad-a5e4-091e047f06b9/clustered-storage-spaces-architecture
Answer from the guy who was presenting this "picture" to public on TechEd:
In this specific example, I started by building up an at-scale Spaces deployment - comprising of "units" of 2-4 servers, attached to 4 SAS JBODs, for a total of 240 disks. As scaling beyond those 240 disks with the 2-4 existing servers would become impractical
due to either port connectivity limitations of the JBOD units themselves, or limitations of the servers due to PCI-E or HBA limitations, further scale is achieved by adding more units to the cluster.
These additional units would further comprise of servers and JBODs, but the underlying storage connectivity (Shared SAS) exists only between servers and JBODs within individual units. This means that each unit would have it's own storage pool,
and it's own collection of provisioned virtual disks. Resiliency of data and creation of virtual disks occurs within each unit.
As there can be multiple units with no physical SAS connectivity between them, Ethernet connectivity between all the cluster nodes and cluster shared volumes (CSV) presents the means to unify the data access namespace between all the cluster nodes regardless
of physical connectivity at the underlying storage level - making the logical storage architecture from a client and cluster point of view completely flat, regardless of how it's actually physically organized. Further, as you are using scale-out file server
atop of CSV (with R2 and SMB 3.0) client connections to the file server cluster will automatically connect to the correct cluster nodes which are attached to the clients’ data.
Data availability and resiliency occurs at the unit level, and these can be extended across units through a workload replication mechanism such as Hyper-V replica, or data replication mechanisms such as DFSR.
I hope this helps clear up any confusion on the above, and let me know if you have any further questions!
Bryan"
2) Sure there's no point as single node cluster is not fault tolerant which compromises a bit whole idea of having a cluster :) Consensus!
3) Idea is nice except I don't know how to implement it w/o third-party software *or* SAS switches limiting bandwidth, and increasing cost and complexity :(
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Can you design a custom blog using muse?

I know how to design my own website and upload it to my server but I was curious if Muse has a way for me to design a custom blog site as well and upload it into wordpress. Let me know!

I'm also thinking about to integrate a content area which could be updated by the customer. I was thinking about something like a "blog-element". After a long search and realising once again that I'm still not the code-guy at all, which lead me to muse eventually , I didn't find an easier solution than the iFrame Builder Lite (iFrame Builder Lite | Exchange | Adobe Muse CC) - maybe this could be also helpful to you.
You can easily embed any site/post you want into adobe muse within a second. That worked for me ; ) So the idea is to set up a wordpress blog where the customer can generate content in a single post - and then it will be simply integrated into muse through the iframe builder by just using the url of that single-post. Everytime my customer updates this one post the content will also change in muse.
Does this makes sense to anybody?! Would be awesome if this is what you are looking for!
Cheers, Robin

Threading design for jTable that uses AbstractTableModel & jProgressBar

The application consists of a number of jTables that are filled using individual classes that extend AbstactTableModel. I want to use a jProgressBar (setIndeterminate(true)) to show progress is happening when a Search button is pressed. A code snippet is shown below. The method doSearch() calls the classes that populate the jTables. The code works fine but is wrong as components are being updated by a thread other than the EDT. Does this need a complete re-factoring? What design pattern should I be looking to use? Without using this extra thread I cannot get the jProgressBar to show progress.
if (IbagDatabase.theInstance().isConnected()) {
              jProgressBarSearch.setVisible(true);
              jProgressBarSearch.setStringPainted(true); //get space for the string
              jProgressBarSearch.setIndeterminate(true);
              jProgressBarSearch.setString("Searching ..."); //display % string
              Runnable i = new Runnable()           {
                  public void run() {
                      doSearch();
                      jProgressBarSearch.setIndeterminate(false);
                      jProgressBarSearch.setString("");
                      jProgressBarSearch.setVisible(false);
              Thread t = new Thread( i );
              t.start();
              //doSearch();
        }

Using a separate Thread for the long running task is the correct design.
The only change you need is that when you want to update a GUI component you need to wrap the update code in a SwingUtilities.invokeLater(...). Read the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/misc/threads.html]How to Use Threads for more information.

Can i design for failover/replication using a Veritas/EMC plugin to iPlanet Dircetory Server?

Similar Messages

Maybe you are looking for