Can I determine what clients are connected to my weblogic server?

Hi, is there anyway of determining what clients are connected to my Weblogic 8.1 server - I want this information to be generated for me, not by maintaining a list when clients login initially to the server.
Also is there any thing that gets fired when a client terminates prematurely - for example being killed by the task manager. I need to know this, so the server knows what users are currently logged in, to prevent a user logging in twice (via the same username login).
Cheers,
Ants.

Hi,
Cousld u send me a simple example to check my Weblogic server for EJB with client.
Iam struggling from last todays.
and also tell what software i should use for deployment of EJB of weblogic 8.1.
ur help highly appriciate by me
My mail ID: [email protected]
thanks,
AHOY

Similar Messages

  • I have a 1st gen time capsule. can I view what devises are connected to my network? if so, how

    i have a 1st gen time capsule. can I view what devises are connected to my network? if so, how

    Open the airport utility.
    Click on manual setup.
    Click on advanced.
    Click on Logs and Statistics.
    Click on Wireless Clients
    Voila!!

  • How can I determine what computers are home sharing??

    How can I determine what computers are home sharing??

    Launch iTunes on the computers you're interested in. Check in the "Advanced" menu.
    If "Turn on Home Sharing" is listed as an option, the iTunes library that you have open is not Home Sharing.
    If "Turn off Home Sharing ([accountname]) is listed as an option, the iTunes library that you have open is Home Sharing.

  • How can I know which clients are connected to my network through express and which are connected through extreme?

    I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
    Here you can see both routers:
    I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
    Below, one can see the summary of the config for both routers.
    Would somebody explain it?
    Thanks,
    Marcelo
    Message was edited by: Marcelão

    please disregard this answer.
    Message was edited by: Marcelão

  • TS2529 how to fix the error message itunes can't sync apps because it can't determine what apps are installed

    how to fix the error message itunes can't sync apps because it can't determine what apps are installed

    Hi,
    This may be Helpful 
    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • Help!!! How can I see what devices are connected to my icloud

    How do I know what devices and computers are linked to my icloud? Used it once at my ex boyfriends house on his computer and I think my photo stream is going to his desktop??? How can I tell and if so disconnect from it?

    My brother asked me for my account one day but i don't know if he used it to connect icloud or to just download an app. I just want to see if his device is connected to my icloud and if so, i want to disconnect him. So is there any site or anything i can do to see what devices are connected?

  • How can i see what devices are connected to my icloud?

    I want to know if pictues from my mac are on any other devices. How can i see what other devices i have connected to my icloud?

    My brother asked me for my account one day but i don't know if he used it to connect icloud or to just download an app. I just want to see if his device is connected to my icloud and if so, i want to disconnect him. So is there any site or anything i can do to see what devices are connected?

  • How can I determine what sites are being referenced within Central Admin Upgrade and Migration Manage Databases Upgrade Status?

    When I go to Central Admin > Upgrade and Migration  > Manage Databases Upgrade Status, I have 2 content databases which have the status:
    Database is up to date, but some sites are not completely upgraded.
    How can I determine which sites are not completely upgraded?

    Manage Databases Upgrade Status will provide you all active and offline DB details, you can get same result
    using below PowerShell cmdlet.
    Get-SPDatabase and Get-SPContentDatabase will provide all active database/Content DB in Farm which include Service application db, central admin DB.
    Get-SPDatabase | Format-Table Name, ID
    Coming back to your question, if you find that there are some site are not completely upgraded then run below command and understand the cause if issue on specific DB.
    Test-SPContentDatabase WSS_ContentDB_Name
    If you find any missing file issue in DB then resolve these issue to upgrade content database.
    (verify all customizations referenced within the content database are also installed in the web application. This cmdlet can be issued
    against a content database currently attached to the farm, or a content database that is not connected to the farm )
    Use the Upgrade-SPContentDatabase cmdlet
    to resume a failed database upgrade or begin a build-to-build database upgrade against a SharePoint content database
    Upgrade-SPContentDatabase WSS_Content
    reference:
    http://technet.microsoft.com/en-us/library/ff607813(v=office.15).aspx
    http://technet.microsoft.com/en-us/library/ff607941(v=office.15).aspx
    If my contribution helps you, please click Mark As Answer on that post and
    Vote as Helpful
    Thanks, ShankarSingh(MCP)

  • How can I determine what computers are authorized on my iTunes account?

    How can I determine what computers have been authorized on my iTunes account?  I've reached my limit and now I'd like to deauthorize one computer.
    Thanks,
    Jerry

    There is no list.
    You can only deauthorize a single computer from that computer.
    If you do not have access to the computers, then you would have to deauthorize all.

  • How can I tell what devices are connected to my e2000

    I have a cisco e2000.  I just turned off guest access, but 'cisco connect' says I still have 4 devices conneted to my router.  Is there a way I can tell what those devices are?
    Also, even thoug the setup said my guest access had a password, I found out it did not.  Any concerns about nosy neighbors?

    Try to install Network Magic. It will show you what are the devices connected to your router. You can download it from here.

  • Where can I see what devices are connected to my Airport Extreme?

    I just switched from a Belkin wireless-g router to the Airport Extreme (802.11n). With my Belkin router, when I entered the address "192.168.2.1", I was taken to a menu where, among other things, I could view all connected devices. How do I do that with my new Airport Extreme? Thanks!

    Hi David, welcome to the discussions!
    You will have to dig a bit for the info, but it is there.
    Open AirPort Utility
    Click on Manual Setup near the bottom of the pane
    Click on the gear shaped Advanced icon at top of the window.
    Click on Logs and Statistics
    Then click Wireless Clients or DHCP Clients to see who is connected.

  • How can i find what devices are connected to my airport router

    We have dishnetwork for our internet and the last 2 months we have exceeded our usage.  I wanted to know if there was a way to see what was using all of our data.

    Not on an Apple router.

  • Users can't send/receive, but are connected to Exchange Server

    Greetings,
    For some reason (happened this morning), none of my users (who are a mixture of Outlook 2010 PC and Outlook 2011 Mac) can send/receive email as quickly as usual (if at all).  Exchange server is 2010.
    Both clients are connected to the Exchange server successfully.  Sending an email usually takes (if it even goes at all) 10-20 minutes.  If I send an email from my Gmail account, again it take about 20 minutes to finally get to Outlook.
    Exchange server is not running any virus software.  On my Outlook client for instance (2010 PC), it's stuck on Updating Inbox indefinitely.
    No changes have been made to the LAN (and no other servers are having connection issues) or WAN.  I have run performance troubleshooting on the Exchange server, and all seems fine.  I have checked event viewer on both the Exchange server as well
    as the DC and DNS server (they are one and the same).  I've rebooted the DC, DNS and Exchange servers.
    Arrrrggggg!!  
    Thanks in advance for any advice.

    Hi,
    According to your description, both your Exchange accounts and Gmail account have the mail delay issue.
    Thus, I'd like to confirm the following information to narrow down the cause:
    1. Do your external users also come across the issue? Because this may be related to Network issue.
    2. Does the issue happens randomly or regularly?
    And I also recommend you use Performance Monitor to check the issue as Ed said.
    If you have any question, please feel free to let me know.
    Thanks,
    Angela Shi
    TechNet Community Support

  • What devices are connected to my wifi network

    How can I see what devices are connected to my wifi?

    What version of Mac OS?
    In any 10.8. (Other OS need slightly different steps.)
    In Finder / Preferences /Sidebar, check Connected servers:
    After that in Finder type command + n, in column view - this comes up:
    Click on Network, and the next column will list the devices on the netework.

  • How can I determine what dns server the wifi client use within airport

    How can I determine what dns server the wifi client use within airport
    I want to use dns servers other then the one that airport extreme is using. For example I got the 172.16.1.1 (the default gateway - airport extreme), but I want to use the office dns servers, that are in a 10.x.x.x range.
    Is there a possibility?
    Thanks and happy eastern

    The Airport Extreme uses the DNS servers assigned by the network that it connects to. Is you Airport Extreme on the 10.x.x.x network? if it is then you are already using the 10.x.x.x DNS servers. Check your Airport Extreme with the Airport Utility and you will see in the Internet tab, the DNS servers used. The devices connecting to the Airport Extreme are assigned a DNS address of the Airport Extremes IP, In your case 172.16.1.1 but all DNS searches and resolution are done with the DNS servers you see in the Airport Extreme.
    If you want to use some other DNS then you can override in the Airport Extreme which will be used by all devices connecting too the Airport Extreme, Or you can edit the DNS address in each devices wireless settings.

Maybe you are looking for

  • HP 1050C plotter intall for Windows 8.1

    I cannot get this plotter to print. It is listed as unsupported by Windows 8 but hope to find a work-around solution.  Has anyone resolved this issue?  Suggestions  much appreciated.

  • Factory method usage, creating the correct Image subclass

    Hi, I created a factory method   public enum ImgType {     SINGLE, STRIP, SPRITE_SHEET public static Image createImage(ImgType imgType) {     switch (imgType) {       case SINGLE:         return new MyImage1(0, 0);       case SPRITE_SHEET:         re

  • Japanese Partner access names not displaying correctly

    Japanese external users' displaying name comes as "????", however their user profile stored correctly in AD. Modifying Locale and Language Settings doesn't seem to have an effect. Does anyone suggest an approach to solving?

  • Stack photos

    I raised this in a thread in the Bridge/Mac forum, but it's probably best here in the feature requests. I would like to be able to 'stack' photo images, so that one photo from a group of similar shots can be displayed in place of all of them. Similar

  • User-exit for VA21

    I'm doing a functional spec for an enhancement to copy the valid from date in VA21 to the valid-to date + 14 days. Does anywone know what user-exit that can be used for the enhancement. Thanks, Torkel