Can I disable the apple remote when my IPT is docked?

I have the universal dock next to a mac computer, every time i use the remote to control the computer, the ipt receives the signal too. Is there a way to disable the remote? I know the computers can, what about the touch?

All good suggestions, Clint. I was going to be a smart-*** and tell you my sticker contains a cloaking device. I didn't know about the orbicule software, though. That's a nice tip.
My office desk faces a window in the front of my home. I enjoy looking out while I work. And my post was prompted by the fact that when I'm in the dim light working in there, the Apple logo is a beacon to passers by. And any good thief knows that Apples have more street value than Windows models.
I do need a new dog. The burglar entered my home from a rear window, and my 15 year old mutt has apparently retired from her role as security beacon. And my alarm system, which did it's job, likely prevented more loss. He only grabbed my laptop and a portable CD player.
I got a new MBP now, and I'm going to install Undercover, and I've ordered a Kensington cable, which I'll attach to the MPB and a chair or desk when I'm not home. That should deter any more smash and grab theft.
Word to the wise... I didn't have a password login. I had my taxes on my laptop, with my SSN, and so I've since also registered with LifeLock. I've got password log-in activated now.

Similar Messages

Can you disable the ellipsis bubble when responding to a text?

Can you disable the ellipsis bubble when responding to a text or iMessage?

Rats. But thank you for answering my question.

Can you use the apple remote to control tv programs?

Can you use the apple remote control like a tv remote to control tv programs & DVDs on the computer? Everything I've found about the Apple Remote talks about using it for products other than desktops. I watch some regular tv shows on my iMac & would like to be able to use a remote control.
I have a built-in infrared receiver.
Thanks!

You should be able to control DVD playback now with the Apple Remote. You may be able to get a bit of functionality with web sites by using Remote Buddy by using it as a virtual mouse and keyboard:
http://www.macupdate.com/app/mac/21872/remote-buddy
but you're not going to get anything close to the sort of functionality you'd get with a remote and a TV.
Regards.

Can I use the Apple Remote with 5th Gen purchased early 2007? IR available?

Have 5th Gen ipod and doesn't react to Apple remote control. Does ipod have infrared capability? Remote states will work on ipods made after 2005. Ipod is in docking station.

Which docking station are you using?
To be used with the Apple Remote, it needs to be one of the two Universal Dock models with a black IR port in the front.
Cheers!
-Bryan

Can I use the apple remote on the iPad mini or iPhone 5s?

Why won't the apple remote I just bought wont' work on my iPhone 5s or iPad mini? It works on my Mac great, but that's not where I need it! What a waste, I spent all day trying to set this up. Nothing in the manual saying it does NOT WORK ON other components. It clearly states it DOES WORK ON OTHER! grrrr!! I even had to reinstall my backup as I accidentenly pressed "forget this device" and could not get bluetooth to work again. Not user friendly at all. Will return for refund if I cannot get it to work!

No ios device ever apart from appletv have had an ir sensor some docks have ir but never the devices

How can i disable the memory test when i start up photoshop? my computer freezes two minutes en then photoshop starts, i know there is notting wrong whit my memory in my computer

when i startup PS then i look two minutes to the startup-logo en see that my memory is being checked.
how can i disable this memory chek in PS?
this problem started a few days ago en this version off PS is working on my computer ol most a year without problems
i have checked my hardware very intensive and there is nothing whrong with my installed ram
this is my system info, sorry that this is not translated into englis, i am from the netherlands and i can just a litle englisch
Adobe Photoshop Versie: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Besturingssysteem: Windows 7 64 bits
Versie: 6.1 Service Pack 1
Systeemarchitectuur: Intel CPU-familie:6, Model:10, Stepping:5 met MMX, SSE-integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Aantal fysieke processors: 4
Aantal logische processors: 8
Snelheid processor: 3073 MHz
Ingebouwd geheugen: 16375 MB
Beschikbaar geheugen: 13944 MB
Hoeveelheid beschikbaar geheugen voor Photoshop: 14750 MB
Geheugen in gebruik door Photoshop: 93 %
Blokgrootte van afbeelding: 128 kB
Niveaus voor afbeeldingscache: 4
OpenGL-tekenen: Ingeschakeld.
OpenGL-tekenmodus: Standaard
OpenGL-modus Normaal toestaan: Waar.
OpenGL-modus Geavanceerd toestaan: Waar.
OpenGL-modus Oude GPU's toestaan: Niet gedetecteerd.
Leverancier videokaart: NVIDIA Corporation
Renderer videokaart: GeForce GTX 460/PCIe/SSE2
Scherm: 2
Grenzen:= boven: 0, links: -1600, onder: 1200, rechts: 0
Scherm: 1
Grenzen:= boven: 0, links: 0, onder: 1200, rechts: 1920
Nummer videokaart: 1
Videokaart: NVIDIA GeForce GTX 460
OpenCL niet beschikbaar
Versie stuurprogramma: 9.18.13.4475
Datum stuurprogramma: 20141112000000.000000-000
Stuurprogramma videokaart: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Videomodus: 1920 x 1200 x 4294967296 kleuren
Bijschrift videokaart: NVIDIA GeForce GTX 460
Videokaartgeheugen: 1024 MB
Rechthoekige structuurgrootte video: 16384
Serienummer: 92298830452574092077
Toepassingsmap: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Tijdelijk bestandspad: C:\Users\gert\AppData\Local\Temp\
Werkgeheugen van Photoshop heeft asynchrone I/O ingeschakeld
Werkvolume(s):
C:\, 223,5 GB, 112,9 GB vrij
Map met vereiste plug-ins: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primaire map voor plug-ins: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Map voor extra plug-ins: niet ingesteld

Photoshop doesn't do a "memory test".
When Photoshop says "measuring memory" during startup, it is asking the OS how much RAM is available and what hard disks are available for scratch disks.
If you have network volumes mounted that are unavailable, then the OS may take a while to time out on accessing those drives.
The same goes if you have a bad USB drive connected.

Can't change the Apple ID when I try to make an iCloud account

When I'm in settings on the iCloud account information page, it shows an Apple ID that I used to share with my family but don't use anymore and I can't change it. I'm trying to back up my phone so that when I get a new one in a few days I can keep all of my photos and contacts, without syncing all of that with my familys phones.

Of course your password shouldn't work on a different Apple ID. This can happen for many reasons, no worries, just sign out back back in using your own ID.
iOS: Changing the signed-in iTunes Store account
http://support.apple.com/kb/HT1311

HT204400 On the apple remote when the network password is entered what to do I click to submit? Help,

HHow do I use the remote to enter the network password. I type it in and THEN what do I click to submit? Help!

Hi Paulinho26,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Cheers,
- Judy

How can I use the Apple remote to view photos on my macbook?

When I try to use the remote, it launches iTunes and will only control iTunes. I would like to use the remote to do other things on my computer!

actually - yes...
http://www.griffintechnology.com/beacon

Can I disable the audio pitch adjustment when using frame rate conversion?

We have a mov file containing digitized film material with audio scanned at 25 fps (1 frame film for 1 frame video) while the film should be 18 fps.
So both video and audio are too fast.
Compressor provides the framerate conversion so source plays at x frames per second.
This works well for video but the audio slowed down remains the pitch it has in the original speed. A great feature but an unwanted result in this case.
Audio should be at a lower pitch since it was recorded too fast.
Can we disable the pitch adjustment, when using rate conversion, so the pitch is corrected (lower) as well?

Hi Jason
This does sound tricky - the only other suggestion that I can add to David's is to use the smallest GOP setting you can, I'm in PAL land so the default is 12frames but I push it down to 7, this forces more I-frames into your mpeg. It makes the file size higher but in a project your length it doesn't matter. Make sure you encode your audio to .ac3 (use the Dolby 2.0 preset in compressor). Although David's limit is 7.4, if I'm not playing back on a laptop I'll set my CBR to 8Mbps (in Compressor CBR is called 'one-pass').
Once you create your mpeg, play it back in Quicktime first to make sure there are no artifacts full screen (with Simulators reduced size sometimes artifacts exist in your orig mpeg that you may not notice).
Also as David said, DVDSP doesn't re-encode an existing mpeg so something else must be going on. Before you re-import your new mpeg, delete your DVDSP prefs and any menu mpegs that it has created.
If you have Toast, try just doing a Build, instead of Build & Format. This will give a VIDEO_TS folder that you can then burn in Toast. Use the Data tab and select DVD-ROM/UDF.
If this doesn't work I don't know what will.
Good luck!
B

Can i use an apple remote on my macbook air 11 inches?

can i use an apple rremote on my MBA 11 inch?

The latest MacBooks no longer include an infrared sensor, so you can't use the Apple remote with them.

Using the apple remote with garageband

Can you use the apple remote with Garagband? I know there are apps that cost like iRed Lite, but are there other options?

are there other options?
the only other one i know of is Remote Buddy

I can't connect to my iTunes library on my Macbook Pro using the Apple Remote app on my iPhone 4S. Why?

Hi all,
I've been looking through the forums for help with this problem. There are a couple of threads with similar problems, but no solved threads and the discussion doesn't seem to go anywhere... As far as I can tell, it's been causing a lot of annoyance for many users, including myself, but it looks like the community's in the dark about why it's happening!
I'm trying to connect to my iTunes library using the Apple Remote app on my new iPhone 4S. As you may know, there are two ways to do this:
Connect via Home Sharing by setting up Home Sharing on both iTunes and the iPhone, or
Connecting directly to iTunes using a four digit passcode.
I've tried both methods, and neither work!
Here's what happens for each method:
From the Remote app start screen, I tap the "Turn on Home Sharing" button. I enter my Apple ID details (which are definitely correct), and get a confirmation message on my phone saying "Home Sharing is on using [my email address]. To control iTunes: Choose Turn On Home Sharing from the Advanced menu in iTunes on your computer." I then go to iTunes, turn on Home Sharing, enter my Apple ID again and get a confirmation message saying "Home Sharing is now on", etc. However, there's no connection formed between my iPhone and my Macbook Pro - the Remote app just shows a message saying "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account [my email address].
From the Remote app start screen, I tap "Add an iTunes Library", and the four digit passcode is shown on my phone. I select the new "Quintin's iPhone" item that appears in the iTunes sidebar under "Devices", and enter the passcode on the screen that appears. Once I've entered it, I get a confirmation message saying "Your Remote is now able to control iTunes" with an "Okay" button. Clicking the "Okay" button makes the screen and the sidebar item disappear completely. On my phone, a message that says "Looking for ..." is shown on the screen with a spinning loading wheel, but nothing happens. After a minute or two, it stops and simply says "Could not find".
After trying both methods, I went through all of the troubleshooting steps here: http://support.apple.com/kb/ts1741 . Absolutely no effect.
I should mention that I was experiencing similar problems on my old iPhone 3Gs with an older version of iTunes. I thought it might have been some kind of hardware fault and expected it to clear up once I got the new phone, but the problem is still there. It's a new phone, a new computer, a newer version an iTunes... even a different network I'm trying to connect to it on. Bizarre!
I've even tried using the Mobile Air Mouse remote application instead. However again, the Mobile Air Mouse app on my phone can't pick up the Mobile Air Mouse server on my Mac.
I'm kind of at the end of my rope here. Anyone?

I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.

How can I disable the Photos app from automatically running when I plug in my iPhone?

How can I disable the Photos app from automatically running when I plug in my iPhone?
I have no intention of ever using Photos, in fact, having to abandon Aperture takes me one step close to moving back to Windows, but I digress.
I just want to NOT have to kill the Photos app every time I plug in my phone.
Thanks.

I am still seeing the option Image Capture, like shown in the screenshot that Rysz posted. But it is another example of the hide-and-seek Apple likes to play with us.
The option has to be set for each device individually. With the device connected to USB, you have to click the tiny disclosure triangle in the lower left corner of the sidebar to reveal the option.
I was perfectly happy with the program I paid for (Aperture), and now to maintain the functionality I have to pay for another application (LightRoom) to get the functionality that I paid for in Aperture.
Aperture 3.6 is working well with Yosemite. I will use it, as long as I have a Mac, that will run Yosemite or a compatible system.
Have you looked at Capture One? It looks much more similar to Aperture than Lightroom.

Can I disable the "corners" that turn down when using Parallels?

Can I disable the "corners" that turn down when using Parallels?

"Auto Save" is Apple's term, I guess. Its controls are so well-hidden I'm flying blind here.
But as I put it in a note to a magazine dedicated to Apple:
I think Auto Save is one of the dumbest things Apple has ever come up with -- oh so typical of what Bill Gates used to give people: lots of extra stuff no one ever asked for, and no one at his company ever thought through.
Say there's a conflict with a program or two I'm trying to use. Machine locks up. I force quit and shut down -- probably without ever seeing the option of stopping Auto Save.
When I open up again, what am I faced with? Yup, exactly the same mess I just tried to get away from.
Boo, Apple!

Can I disable the apple remote when my IPT is docked?

Similar Messages

Maybe you are looking for