Can I disable the Connectivi​ty function so I can use my Blackberry 8800 on an airplane

Can I disable the Connectivity function so I can use my Blackberry 8800 on an airplane
Solved!
Go to Solution.

Yes.  You should have an icon for Wireless ON/OFF. 
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

  • How do I disable the earphone-remote function of iTunes?

    Hi,
    I'm looking for a way to disable the capability of my mac not to use the remote of my iphone earphones. Anyone?
    Since a couple of month, my iTunes starts to play/pause while moving the jack cable around (earphone or normal jack cable). Itunes is acting like the iPhone earphone remote is used when I'm slightly moving anything... but I'm not using the remote of these earphones, just a usual jack cable!
    The anoying point is that, it is doing now a lot more, and it is really really annoying. Without moving my laptop or the cable (just the mouse or the glass near it), Itunes stops or starts playing.
    I read that I should clean the jack's holes of my laptop. I tried, but the problem came again. Since I'm using my laptop with quite a big sound system, I can't pull in and out my jack cable until it works again without having huge sounds coming from the speakers.
    So I don't see any other good solution. Has someone a trick? How do I make iTunes not checking the signal of the iPhone earphones remote?
    Thank's in advance.

    You are asking about what is known as a "closed" network. If you do this, anytime a "new" device wants to join the network, the user will need to know the name of the wireless network and enter it, along with a password.
    But, the idea of a "closed network", where users cannot see the name of your wireless network, is long out of date. That's because there are dozens of free utilities on the Internet that will display your "closed" network in seconds. All lthe neighborhhod teenagers, who are looking for an open wireless network that they can get on, already have all the tools they need.
    So, your best bet is going to be to use WPA2 Personal security with a long, non-dictionary password. Chances are, you are already doing this.
    True, a "closed" network might prevent a few honest neighbors from seeing the name of your wireless network, but it won't slow down anyone who really wants to see wireless networks in the area.
    I don't bother with this, because I think it is a waste of time, but you may feel differently. If you want to do this, here is the procedure to follow on your Time Capsule:
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Manual Setup
    Click the Wireless tab/label located just under the row of icons that you see
    Click the Wireless Options button near the bottom of the window
    Enter a check mark next to "Create a closed network"
    Click Done
    Click Update to save your settings and the Time Capsule will restart
    If you have additional Apple routers like an AirPort Extreme or AirPort Express, you must configure each of these devices separately as above.

  • Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?

    Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?

    Yes.
    1) Connect an Ethernet cable from one of the LAN <--> ports on your existing wireless router to the WAN "O" port on the Time Capsule
    2) Go through the standard configuration suggested by the setup "wizard"
    3) Then manually turn off the wireless function using AirPort Utility

  • How do I temporarily disable the pop-up function?

    How do I temporarily disable the pop-up function on my Mac desktop?

    Do you mean "tooltips" ?
    Similar to this?
    http://www.macworld.com/article/55202/2007/02/termtooltips.html

  • Disable the App Delete functionality

    Hi,
    does anyone know of a way to disable the Application delete functionality on the iPhone - or make it so it requires a passcode;
    I tend to let my daughter to play with the phone for educational apps and movies and she has a tendancy to wander and delete apps (resulting a couple of times in data loss)
    Anyone aware of a good way to cripple or restrict the App management ??
    TIA
    Rich

    No, you cannot.
    There are plenty of posts here about parents giving their kids the phone and it ending up badly - its your choice. But if the dribble or juice trips the moisture senors, you won't get any sympathy. Letting a child play with a $600 piece of sensitive electronics really isn't sensible but its your choice.
    Buy her a cheap Touch on Ebay and play safe.

  • My smart cover suddenly disables the auto lock function

    Hi, until yesterday the smart cover on my new ipad3 was working fine, now it doesnt work anymore, 1. it disables the auto lock function, meaning when cover is on the ipad doesnt lock and 2.if I close the cover it doesnt lock the ipad automatically which it did until yesterday / anybody any idea ? Thanks !

    Yes, this is a new account I set up lastbweekmprior to my holidays. That explains it. I thought I had a problem with the operating system, so many thanks for that.
    I will contact my system administrator to adjust the settings.
    Thanks again.

  • How do I find "Tools" so I can disable the auto complete function?

    I was told that to disable to auto complete function, I had to click on Tools. I can't find "Tools". How do I get there?

    Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.
    Use "Firefox > Options" instead of "Tools > Options" if the menu bar is hidden.
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history" : "Remember search and form history"
    *https://support.mozilla.org/kb/Form+autocomplete

  • How do I disable the alt key function?

    I have tried to clean my alt key on my macbook keyboard and now my macbook is acting like the key is hold down all the time eventhough it's not. Have tried to play around with the key, but its still the same. I wonder if I can disable the functions of the alt key in the mac os?

    you can do it system preferences->keyboard and mouse->keyboard->modifier keys. set "option" to no action. however, option is really a pretty useful key so you might consider trying to fix you keyboard.

  • How can I disable the mouse pad? I prefer to use a mouse.

    The pad is particularly a nuisance when I try to type, perhps I catch it with my wrists, I don't know. I'd rather use a mouse.

    The 'quick and dirty' way would be to cover the trackpad with something thick enough not to pickup 'taps' or 'gestures'. A business card cut to fit tightly should be thick enough, but I use a three thicknesses of index card glued together and cut to fit tightly into the trackpad opening ''(one corner cut off so I can remove it when I do need to use the trackpad)''. I did that back in 2008 with an Acer laptop and do it now with my Asus EeePC 900 netbook; if I don't have the mouse with me ''(or the battery is dead - wireless USB mouse)'' I just remove the cardboard "plug" so I can use the trackpad.
    Beyond that, check with a Windows 7 support forum to see how to disable that "device". That really isn't a Firefox support issue.

  • About disable the cellular data function

    Hi everyone, I get a big problem...
    I have just come back to HK after my holiday. I'm really sure that I had turned off the cellular data function when I left HK.
    However, I was really surprised  when I received the bill. There is a big charge for data roaming. I have contact my mobile phone company and he replied that it is impossible to completely turn off the cellular data function of the iPhone. iPhone will get updating some data, such as weather automatically.
    is it true??
    Thx for your help!!!!

    Hi,
    This topic interests me.  Can I just confirm that navigating to Settings>General>Mobile Data and turning:
    1) Mobile Data
    2) Enable 3G
    3) Data Roaming
    to "Off" will not entirely prevent access to cellular data networks?  What if you navigated a step further to >Mobile Data Networks and simply deleted all entries, or replaced existing entries with garbage?

  • How to disable the trackpad button function?

    My trackpad botton goes mad, it's seems like hold you mouse's left button and you can click the right button, just can't open the file, my usb mouse works great only in Snow Leopard, in Leopard I can use none of mouse or trackpad.
    I think my trackpad button has broken, I want to disable this button, but I don't know how, can you give me some advise?
    I'm using Snow leopard( 10.6.2 ) now, how to disable the trackpad button in SL?

    I'm using Snow leopard( 10.6.2 ) now, how to disable the trackpad button in SL and keep my trackpad available, I prefer using touchpad, I think I can disable the button and still use touchpad?
    I apologies for my poor english.

  • SmartView disables the "Save As" Function in MS Excel 2007 / Vista

    Does anyone know how to get around this issue? I have Vista and Office 2007. When SmartView is installed, it does not allow me to use the "Save As" Function in Excel. SmartView has now rendered my Excel to be useless. Thank you Oracle.
    Does anyone have any thoughts?
    Thanks,

    Hi,
    Could this be related to this thread:
    Smartview Office Error (Unable to Save)
    Seb

  • How do I disable the ability for a user to setup/use the sync feature?

    I need to disable this feature for all users in a corporate environment, how do I do this? I would like to disable the "Sign in to Sync" on the menu and the tab in the Options window.

    You can look at:
    *CCK2 Wizard: https://addons.mozilla.org/firefox/addon/cck2wizard/
    *http://mike.kaply.com/2014/01/08/can-firefox-do-this/

  • Using the JAVA ImportXmlTemplate function, should I always use XSL directory?

    Using the JAVA ImportXmlTemplate function requires XSL directory, I do not need XSL for my updates, how can I workaround this requirement?

    Ok, thanks for your quick answer. I saw you last blog posting regarding simple bar codes, I hope your next one turns up soon (read: today ;-) ).
    I did take a swing at writing my own class according to the user guide, using JDeveloper. One of my problems is that I am not that familiar with the whole java world, my experience lies almost entirely within .NET development. So when I read stuff like "make sure the class is available in the classpath for the JVM" and things like that, it is not a detailed enough description for me in order to make anything out of it. Do you think you can clarify that for me?
    I also wonder if you have any tips and tricks on how to trace/log information from the class when it executes? Because I think that I can actually get it to be called, it's just that something goes wrong and the generated PDF becomes badly formatted and has no content. I can see that some calls are made to a Logger class inside the example class. I guess that I need to set up some runtime configuration for that information to turn up in a file, but again me lacking experience from the java world prevents me from accomplishing that :-)
    Regarding tracing and logging from the java classes for the BI Publisher, can I get them to trace or log debug information in some clever way?
    The app I am developing is a .NET app that calls these classes using a product called juggerNET. I am developing a print direct application for JDEdwards EnterpriseOne since BI Publisher is not entirely integrated into it yet.
    I would greatly appreciate a quick reply this time as well if you can find the time!
    Best regards, Jörgen

  • How to disable the archive logs in SAP IDES(Windows) using SQL Server

    can any body tell us How to disable the archive logs in SAP IDES(Windows 2003) using SQL Server 2000.SP4.?

    Hi,
    Unfortunately, SQL Server does not have the option to turn off transaction logging. You can set the recovery mode to SIMPLE, instead of FULL. This will result in the transaction log being truncated on checkpoint.
    http://support.microsoft.com/kb/873235 - check this microsoft article
    This will help in reduction of the size of the transcation log.
    - Regards, Dibya

Maybe you are looking for

  • I need help. One line of text in my layout isnt printing for some reason.

    I'm working on a business card. Part of the logo is not printing. The logo is just text, in this case the font is Curlz MT. Not sure what the problem is. When I print it to either of our copiers, this line will not print. When I PDF the file, the lin

  • Agent10g: Size of Management Agent Log and Trace Files get oversize ...

    Hi, I have the following problem: I had installed the EM Agent10g (v10.2.0.4) on each of all my Oracle servers. I've done a long time ago (a few months or a few years depending on wich server it was installed). Recently, I've got PERL error because t

  • How to decide that an aggregate  is required?

    I am currently using an infocube for reporting, I have seen that system has suggested an aggregate for that infocube, I want to know the scnarioes based on which,  I can decide that my infocube actually needs the aggregate? Is there any thing I can c

  • My audio output don't recognize my Klipsch speakers

    Hello, I just bought an iMac and tried to hook up my Klipsch THX 2.1 speakers and I can't get iMac to recognize the connection. I did a web search on this and did not find any relevant information. Do these speakers only work on PC's? I looked at the

  • Average calculation Problem

    how can i apply the average calculation on a varchar column means only average the number values in that column and leave or return null if any character value comes in average thanks