Can I disable the Play Back Controls?

Hello all
In my project, I need the PlayBackControls(playbar controls) to work only on few slides instead of on all slides. I can hide the Play Bar but it would look unlike the other slides.
So, can I disable the PlayBack Controls(i.e., the play bar sholud be visible but the controls shouldn't work) using advanced actions on particular slides?
Regards,
Kartik.

Hello Kartik,
I'm not a Flash programmer, only using functionalities of Captivate (inc. advanced actions) and AFAIK there is not such a possibility.
If you want to have the same functionalities, you could insert custom navigation buttons, and you will be able to disable them on specific slides. Let me know if you want to try that, and in that case which buttons you want to have and which ones you would like to disable on certain slides?
Lilybiri

Similar Messages

I muted the sound while playing angry birds and now I can't get the sound back. I have the sound on ipod, just not with the games.

I muted the sound while playing angry birds and now I can't get the sound back. I'm fine with ipod, just the games

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

HT1725 I have a few songs that will only play for about a min the it will stop playing how can i get the songs back to a full song

I have a few songs that will only play for about a min the it will stop playing how can i get the songs back to a full song

Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting the incomplete tracks from your iTunes library and redownload them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those songs and use the 'Report a Problem' link.

How can I disable the control key?

How can I disable the control key?
My Controll-Key is permanently pressed.... i dont know why, please help me!

Take it to an Apple store or dealer to get it repaired.

I just created a slide show with music and tried to export it to a thumb drive to play on another computer. File seemed too large and slow to export, so I deleted the music. Now, I can't get the music back on it and don't know what to do...

Can't export my slide show. Is the file too big? Tried to export without music. Now, can't get the music back into it.

If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
I sure would like to decide about that myself.
Thanks in advance if this will be changed.

singmk wrote:
Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
Would like to hope there is some way to have control over this. Can someone help?
Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
Hope this can help you.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

How can I disable the Photos app from automatically running when I plug in my iPhone?

How can I disable the Photos app from automatically running when I plug in my iPhone?
I have no intention of ever using Photos, in fact, having to abandon Aperture takes me one step close to moving back to Windows, but I digress.
I just want to NOT have to kill the Photos app every time I plug in my phone.
Thanks.

I am still seeing the option Image Capture, like shown in the screenshot that Rysz posted. But it is another example of the hide-and-seek Apple likes to play with us.
The option has to be set for each device individually. With the device connected to USB, you have to click the tiny disclosure triangle in the lower left corner of the sidebar to reveal the option.
I was perfectly happy with the program I paid for (Aperture), and now to maintain the functionality I have to pay for another application (LightRoom) to get the functionality that I paid for in Aperture.
Aperture 3.6 is working well with Yosemite. I will use it, as long as I have a Mac, that will run Yosemite or a compatible system.
Have you looked at Capture One? It looks much more similar to Aperture than Lightroom.

How can I disable the lock code on my N8

Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
Would like to hope there is some way to have control over this. Can someone help?

singmk wrote:
Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
Would like to hope there is some way to have control over this. Can someone help?
Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
Hope this can help you.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

Can I disable the audio pitch adjustment when using frame rate conversion?

We have a mov file containing digitized film material with audio scanned at 25 fps (1 frame film for 1 frame video) while the film should be 18 fps.
So both video and audio are too fast.
Compressor provides the framerate conversion so source plays at x frames per second.
This works well for video but the audio slowed down remains the pitch it has in the original speed. A great feature but an unwanted result in this case.
Audio should be at a lower pitch since it was recorded too fast.
Can we disable the pitch adjustment, when using rate conversion, so the pitch is corrected (lower) as well?

Hi Jason
This does sound tricky - the only other suggestion that I can add to David's is to use the smallest GOP setting you can, I'm in PAL land so the default is 12frames but I push it down to 7, this forces more I-frames into your mpeg. It makes the file size higher but in a project your length it doesn't matter. Make sure you encode your audio to .ac3 (use the Dolby 2.0 preset in compressor). Although David's limit is 7.4, if I'm not playing back on a laptop I'll set my CBR to 8Mbps (in Compressor CBR is called 'one-pass').
Once you create your mpeg, play it back in Quicktime first to make sure there are no artifacts full screen (with Simulators reduced size sometimes artifacts exist in your orig mpeg that you may not notice).
Also as David said, DVDSP doesn't re-encode an existing mpeg so something else must be going on. Before you re-import your new mpeg, delete your DVDSP prefs and any menu mpegs that it has created.
If you have Toast, try just doing a Build, instead of Build & Format. This will give a VIDEO_TS folder that you can then burn in Toast. Use the Data tab and select DVD-ROM/UDF.
If this doesn't work I don't know what will.
Good luck!
B

How can i disable the internal speakers without voiding the warranty?

The students here annoy other students trying to study, I have made an extension for the headphone so that it is mounted under the monitor, facing the front and hot glued the headphone jack to the back, but the students ripped out the extension and threw it away so that they could play very awful music and annoy everyone.
How can I disable the internal speakers on our imacs without voiding warranty? There has to be a way!
Thanks-

Have you considered corporal punishment? One instructor I had in high school, when he had detention duty, played classical music an operas all during detention. He was quite "evil". He would have some slow "sleepy" music going for a bit, then it would throw in something to wake every one up like the 1812 Overture or something, and repeat this a few times...and have the music loud enough to prevent talking. Many detention-ees thought that was "cruel and unusual punishment." (LOL)
But to your question. Since opening the case would normally void the warranty (unless you can find a empathetic Apple technician), what I would suggest is a "sleeve". Imagine some sheet metal and form it into a rectangular tube. The tube would closely follow the shape of the iMac covering all the cable ports. Then bolt the tube and iMac to the table. (Or at the very least, bolt the tube to the iMac.) Basically, make it so that there little room between the tube and iMac, that no one could access the ports without removing the tube. You'll also need to secure the cables to the tube so that no one can just pull out the cables, yet leave enough slack to allow for removal of the tube for maintenance. Even if the metal is not a full tube, but the Mac and metal is bolted to the table in such a way as to prevent access to the ports could be sufficient deterrent. If metal is not possible, then perhaps plastic or wood.
I realize that is requires some work, and there is a drawback as pranksters could start dropping stuff inside the tube. Perhaps just have a clear plastic "wall" preventing all physical access to the Mac. Only a USB extension cable for the keyboard/mouse. Use Remote Disk sharing to mount CDs, if necessary.
Some thoughts, anyway. Good luck!

How can I disable the behance pics during the startup of my CC 2014 programmes?

When I start my photoshop cc 2014 and illustrator and all other apps, there ware always some behance pics from users.
is there a way to disable them?
thanks a lot
alex

hi sarah,
thanks for getting back to me.
i mean these images:
when the programmes are starting up…
thanks a lot for your help
alex
Am 08.01.2015 um 16:05 schrieb SarahBehance1 <[email protected]>:
How can I disable the behance pics during the startup of my CC 2014 programmes?
created by SarahBehance1 in Behance - View the full discussion
HI Alex - can you send a screenshot of what you're seeing? I'm not sure what you're referring to.
Talk to you soon, thanks!
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7077548#7077548 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7077548#7077548
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Behance by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
Alex an der Haas
Art Direction
// Die Goldkinder
// Ausdenken und Machen.
// Mollardgasse 85A / Stiege 3 / Top 142, 1060 Wien
// Tel: +43 (0) 1 595.37.07
// Mob: +43 (0) 699.816.366.31
// http://www.diegoldkinder.at

How can I disable the double-tap to zoom in function?

I play a game where I must click fast on a button, but tapping the button zooms in/out the screen all the time.
I also don't need to zoom in. Thus, how can I disable the tap to zoom function?

The double tap focuses on elements on the page and to zoom pinching in and out are the main features of zooming in Fennec. Currently there are no ways to disable this feature.

Can we disable the default push buttons on the ALV Grid

Hi,
    Can we disable the default push buttons on the ALV
Grid Control...
    If so, pls send me the procedure...
thanks and regards
   raghu

Hi,
In the PBO:
PERFORM f9100_exclude_functions USING :
                         i_exclude[] '&CHECK',
                         i_exclude[] '&REFRESH',
                         i_exclude[] '&LOCAL&CUT' ,
                         i_exclude[] '&LOCAL&COPY',
                         i_exclude[] '&LOCAL&PASTE',
                         i_exclude[] '&LOCAL&PASTE_NEW_ROW',
                         i_exclude[] '&LOCAL&UNDO' ,
                         i_exclude[] '&LOCAL&APPEND',
                         i_exclude[] '&LOCAL&INSERT_ROW',
                         i_exclude[] '&LOCAL&DELETE_ROW',
                         i_exclude[] '&SORT_ASC',
                         i_exclude[] '&SORT_DSC',
                         i_exclude[] '&FIND',
                         i_exclude[] '&SUMC',
                         i_exclude[] '&SUBTOT',
                         i_exclude[] '&MINIMUM',
                         i_exclude[] '&MAXIMUM' ,
                         i_exclude[] '&VGRID' ,
                         i_exclude[] '&VEXCEL' ,
                         i_exclude[] '&VCRYSTAL',
                         i_exclude[] '&HTML',
                         i_exclude[] '&MAINTAIN',
                         i_exclude[] '&SAVE',
                         i_exclude[] '&GRAPH',
                         i_exclude[] '&HELP',
                         i_exclude[] '&ALL' ,
                         i_exclude[] '&SAL' .
*                         i_exclude[] '&EXCLALLFC'.
*&      Form f9100_exclude_functions
* This form exclude buttons from the toolbar.
*      -->P_IEXCLUDE text
*      -->P_1150   text
FORM f9100_exclude_functions USING   pexclude LIKE i_exclude
                               value(pfunction).
DATA: l_exclude TYPE ui_func.
l_exclude = pfunction.
APPEND l_exclude TO pexclude.
ENDFORM.                    " f9100_exclude_functions
This will exculde the default push buttons.
Let us know if it works for you.
Regards,
Anjali

How can I disable the system feature which automatically restarts applications i had open during a previous session ?

How can I disable the system feature which automatically restarts applications i had open during a previous session ?

When you log out, uncheck the box to reopen applications. If you're still using 10.7.3, then you will have to uncheck the back with each shutdown or restart.
10.7.4 update was suppose to fix it that when you uncheck the box, it should remain unchecked for restarts after that.
For the resume features, check this link:
http://reviews.cnet.com/8301-13727_7-20083707-263/managing-mac-os-x-lions-applic ation-resume-feature/?tag=mncol;title

Can I disable the Play Back Controls?

Similar Messages

Maybe you are looking for