Can I disable the wireless functionality and use Ethernet only?

Can you completely disable the wireless functionality and use the Airport Extreme Base Station as a wired internet router with integrated print server?

Yes. I do that. I don't use a print server but I was using that port for an HD. My AExpress connected to it is wired also.

Similar Messages

  • Can I disable the wireless function on WRT54G???

    I just installed a WRT54G, and I am currently only using the wired portion of this device.  Is there any way to disable the wireless function until I need to use it?
    Thanks,
    Todd

    Look at your router.   I assume the "WLAN" light is on.  If so, proceed:
    Open your web browser and point it to 192.168.1.1.
    Enter your user name (if any) and password.
    This will take you to your router's setup pages.
    Go to the "Wireless" tab, "Basic Wireless Settings"
    Set "Wireless Network Mode" to "Disabled".
    Click on "Save Settings" button, and wait several seconds for the page to refresh.
    Exit your web browser.
    Verify that the "WLAN" light on the front of the router is now off.
    If it is, you are done!

  • Can I disable the wireless signal?

    I'm using a wireless router (e2000) as a wired router. I don't currently have a use for the wireless feature, so can I turn that off somehow?

    Wizzard wrote:
    Under the Wireless tab,select manual and disable the option "SSID Broadcast" and click on save settings.
    That won't disable the wireless signal. It will only disable the SSID broadcast. The wireless is still accessible. It will still cause transmissions. The network is still accessible. The presence of the wireless router is still easily detected.
    Only setting the network mode to "disabled" will disable the wireless radio in the router, i.e. powering it off.

  • Any way to disable the bluetooth handset and use enable streaming audio only?

    I don't use bluetooth in my car to make or receive phone calls and only use it to stream Pandora.  On my previous BBs I was able to disable the handset function and just use streaming audio, but I'm not finding any similar options on the Z10.  Does anyone know of a way to do this? Right now I'm just powering off my stereo when I receive a call, but that is not a great solution.  Thanks for any feedback.
    Solved!
    Go to Solution.

    Hello rangerdanger and welcome to the BlackBerry Support Community Forums.
    Thanks for your question regarding Bluetooth.
    The BlackBerry Z10 does not have the option to edit what services are allowed with a Bluetooth connection.
    Depending on your vehicle, you may have to access your Bluetooth set up or settings within your car's dash to control what features are enabled with Bluetooth. 
    If you are unsure how to access these settings, contact your dealership or consult your owners manual.
    Cheers!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • How to disable the security code and use only the Touch ID

    how to disable the security code and use only the Touch ID

    You can't use Touch ID without a passcode.
    http://support.apple.com/kb/HT5883

  • I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one?  Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

    I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one?  Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!

    You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store

  • How can I disable the wireless port (feature) on my Verizon router ?

    How can  I disable the wireless feature on my Verizon router.  I do have 9100EM15-10 Model. I don't know the procedure or what the PW should be. Thanks nss

    Thanks. Can we confirm about the router reset procedure. I have 9100EM15-10 Model router. How can I log in to disable the wireless port on my router. I tried calling Verizon tech support but they were difficult to reach or get in last night.

  • Is there a way to disable the Facetime camera and use an external USB webcam for browser based webchat?

    Is it possible to disable the Facetime camera and use an external webcam as a default? So that when you access browser based applications that require a webcam it doesnt default to the Facetime camera but uses the USB webcam instead?
    Cheers.

    (1) You don't need to "disable" anything to select among cameras connected to your Mac.
    For all cameras you access via browser based applications (cameras connect via Flash browser plugins), control-click on an open video window in your browser page and adjust the camera settings to select between a connected USB and Firewire video camera.  Specific instructions are here:
       http://www.macromedia.com/support/documentation/en/flashplayer/help/help04.html
    If you don't see a choices of cameras in the Flash settings, your Mac is only recognizing one camera.  Verify that your external cam is Mac-compatible and properly connected.
    Your choice is stored in preferences so the same camera will activate on the next browser page until you change it.
    (2) BTW, a current (Feb 2013) discussion of how to select among connected Mac cameras for a few more apps is available here:  http://discussions.apple.com/message/21158673#21158673
    Mac OSX 10.8.2

  • I have an english version of cs 5.5, can i download the german version and use the key of the english?

    i have an english version of cs 5.5, can i download the german version and use the key of the english?

    No. serial numbers are platform specific and since you are not on the latest version, you cannot even make a language swap. you would have to buy the CS6 upgrade to do so.
    Order product | Platform, language swap
    Mylenium

  • Can I disable the wireless part of my airport express and use ethernet?

    I have an airport express which is used to print and stream itunes to my stereo.
    I just purchased an airport extreme and I am worried that it will lower my throughput from N to G. Is there a way to connect the airport express to the airport extreme via ethernet chord and disable the wireless part? I realize I can get still connect to a printer using the usb port on the extreme but then I have no way of streaming my itunes?

    To adjust the wireless radio power on the AirPort Express Base Station (AX), using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    AirPort > Wireless tab > Wireless Options...
    o Transmit Power: <select the transmit power from 10% to 100%>
    o Click "Done" to close the Wireless Options window.
    o Click on "Update" to save the settings to the AX.

  • Can I disable the yellow volume and brightness bars that pop up when using the function keys?

    I upgraded to windows 8 and it has volume and brightness meters that pop up automatically, and they are nicer looking than the big yellow lenovo ones. Plus having 2 bars is redundant. How can I disable the lenovo ones so I can just have the windows 8 ones? I had just the windows 8 ones until the lenovo driver package installed itself automatically.

    hi caseyls,
    Welcome to Lenovo Community Forums!
    AFAIK the Indicator for Brightness and volume are Installed via Lenovo Energy Management Software.
        Try uninstalling the sOftware from (Control Panel / Uninstall a program)
    And it should disable it.
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Can I create a XSL function and use it in the Word Template

    I have a complicated logic (complicated if i have to repeat it 400 to 500 times) for determining if I should show a null expression. If the value is null or equal to 0 show N/A else show the value.
    If I have to repeat this over and over again and it turns out to need an update this would be a nightmare. But I don't have time to waste on a wild goose chase either. If I have to do something a couple thousand times i better get started basically.
    Can I create a function in the word template then call it throughout the word template for each field I have to check?
    Have a link to a tutorial that is doing this?

    If you really want to have a function, you have choice of using subtemplates (either RTF or XSL)
    You can check for steps here
    http://www.oracle.com/technetwork/middleware/bi-publisher/overview/bip-subtemplate-1-132933.pdf
    But if you have functions or use the code directly you anyway need to modify your 400-500 fields.
    i.e. either
    <?xdoxslt:ifelse(COLUMN='','NA',COLUMN)?>
    or <?call:template_name?>

  • How can I disable the 'First Run' and 'Whats New' pages from showing after updating Firefox for all users that log onto a system.

    I am a system administrator and need a way to set a global preference to not open the Whats New and first run pages. I found the browser.startup.homepage_override.mstone preference in the user profile but want to be able to set this globally.

    Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify default values.
    Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
    pref("general.config.filename", "mozilla.cfg");
    pref("general.config.obscure_value", 0); // use this to disable the byte-shift
    See:
    * http://kb.mozillazine.org/Locking_preferences
    You can use these functions in mozilla.cfg:
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes in current session
    lockPref(); // lock pref, disallow changes
    *http://kb.mozillazine.org/browser.startup.homepage_override.mstone

  • How can I disable the Download function of safari?

    since I am using the iGetter to download files from internet and I did integrate iGetter into safari. but sometimes when i download some files the download of safari automatically pop up and start downloading. that's annoying me. can i disable this function.
    PS: what is the use of automator in Leopard OS and how to use it effectively?
    thx

    Hi
    Some sites are coded by developers in such a way that 3rd party download accelerators such as iGetter or Speed Download are ignored, downloading the file directly through a browser's download mechanism. Those are usually coded as a "forced download" rather than a stream download. I don't know of a particular work-around. Not using iGetter I don't know what its capabilities are (I use Speed Download), however, possibly you might see the download file listed in the Activity Window (Command/Option/A) where you could copy it (Command/C), then paste it into iGetters download window (I know I can do this in SpeedDownload).
    In any event, you won't be able to preempt or anticipate the direction the download will go until the process starts.
    Best place to ask questions about Automator is the Leopard Automator forum.

  • How can I disable the Wireless Keypad?

    The touchscreen tablet chirps all day about a "Communications Failure" with the wireless keypad.  The tablet itself and our iPhones are all we use to arm/disarm the system.  Plus, the wireless kepad goes through batteries like nuts.  How can we either disable the keypad, or disable the notifications?

    I think you can remove the wireless keypad with the touchscreen. Go to settings, enter the installer code, find the keypad and remove it. If it burns through battery's it probably is too far away from the touch screen with not enough other devices in between. If you would place some other zigbee devices in between the keypad wouldn't need to increase it's radio signal to communicate. 

Maybe you are looking for