Can I disable the wireless part of my airport express and use ethernet?

I have an airport express which is used to print and stream itunes to my stereo.
I just purchased an airport extreme and I am worried that it will lower my throughput from N to G. Is there a way to connect the airport express to the airport extreme via ethernet chord and disable the wireless part? I realize I can get still connect to a printer using the usb port on the extreme but then I have no way of streaming my itunes?

To adjust the wireless radio power on the AirPort Express Base Station (AX), using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
AirPort > Wireless tab > Wireless Options...
o Transmit Power: <select the transmit power from 10% to 100%>
o Click "Done" to close the Wireless Options window.
o Click on "Update" to save the settings to the AX.

Similar Messages

How can I disable the wireless port (feature) on my Verizon router ?

How can I disable the wireless feature on my Verizon router. I do have 9100EM15-10 Model. I don't know the procedure or what the PW should be. Thanks nss

Thanks. Can we confirm about the router reset procedure. I have 9100EM15-10 Model router. How can I log in to disable the wireless port on my router. I tried calling Verizon tech support but they were difficult to reach or get in last night.

How can i disable the credit card from that stolen acc and register to my new account

Hello everywone i have a big problem.. Somewone stole my apple id and changed everything (email , secret question). In that account was my credit card registered. how can i disable the credit card from that stolen acc and register to my new account ?? thanks for help

Is it an IMAP or POP account?
For POP accounts, you can select remove from server under the advanced tab of the account.
Apple support article with information on receiving a message more than once:
Mail Problems

How can I disable the automatic hiding of known file attachments, and why are always about 10 internet pages where I have to download something if i use firefo

How can I disable the automatic hiding of known file attachments, and why are always about 10 internet pages where I have to download something when I use mozila firefox?
Windows Computer

1) If you are talking about the file names on the computer, there is a
setting to turn off known file types. Open your file browser. Then
just under the location bar, press '''Tools,''' then '''Folder Options.'''
A new window will open. Select '''View.''' Look for
'''Hide Extensions For Known File Types.'''
2) Never NEVER '''NEVER''' download anything unless you know what
it is. If a web site claims it needs to download something, what is it?
It could be something like the flash player, '''or a virus ! !'''
Ask questions, or go somewhere else.

HT4259 I have a Netgear wndr3400 and I can "join a wireless network" but can not "extend a wireless network" on my Airport express. Does anyone know why?

I have a Netgear wndr3400 and I can "join a wireless network" but can not "extend a wireless network" on my Airport express. Does anyone know why?

Sorry, but "Extend a wireless network" is a proprietary Apple setting that will only work if you have another Apple router.
It is not compatible with devices from other manufacturers.

I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. any soln ?

I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing wireless network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. I am using a set of speakers from kenwood connected to the airport express. The operating system on my macbook is mac os X 10.5.8. i am sure it is not a problem of streaming music online because i have even tried playing music which are stored in my macbook.
Is there any problem with the setting in itunes or quicktime ? Kindly reply...... I am waiting for your valuable suggestion.
Thank you a lot in advance.

I am shocked to have found this same AX audio dropout problem starting TODAY, every few seconds the audio just drops for a couple seconds and then resumes: Latest software versions of everything. No iPad, iPhone or Touch. Internet hardwired to D-Link DES1105 (1000baseT Switch) hardwired to new 80211N AX, AX optical to stereo, AX Wi-Fi internet to basic 1st-gen MacBook operating at 80211G, and an older 'G' AX extender at the far end of the house, away from all this. The MacBook streaming iTunes is usually 12 feet from AX. I've used this setup for years of trouble-free AirTunes / Airplay until today. Today I also found 2 very reliable fixes and 1 way to force a dropout, but first, I read some posts and tried ALL following settings one-at-a-time and restored them ALL because NONE of them helped: Turned off IPV6. Streamed to multiple speakers 'Computer' and 'AX' (restored to just AX). Turned off 'Ask to Join new (WiFi) Networks'. Turned off Bluetooth (can't live without Magic Trackpad, so glad that wasn't it). Here's my discoveries: Lo and behold, each time I click the Airport icon in the Menu (you know it shows you've got 4 bars from AX) when the status switches to 'Looking for Networks' for a second it CAUSES the AX audio to drop out for a couple seconds (it never did that before today.) iTunes still playing, streaming, AX laser still lit, but the 'PCM' light on stereo and the sound GOES OUT EVERY time I click the Airport icon in the menubar, just like the regular, annoying dropouts. So, to reduce traffic I quit Safari (3 tabs, no streaming, just Gmail, Google, and Netflix browsing). Lo and behold, the dropouts stopped altogether. No other Web apps going (not iTunes Store, Genius, Ping, nothing), so I launched Chrome to the same 3 tabs and the dropouts HAVE NOT RETURNED. That's right, not only did simply QUITTING SAFARI cure it, and Chrome doesn't contribute to it, but I can demonstrate it just by forcing my Airport to re-scan. Works for me, written using Chrome. The other reliable fix is to hardwire MacBook to the Switch. This is obviously not ideal, but Airplay audio doesn't drop out over Ethernet. Also, in all my tests, it made no difference whether iTunes did the streaming, or Airfoil did.

Can I disable the wireless signal?

I'm using a wireless router (e2000) as a wired router. I don't currently have a use for the wireless feature, so can I turn that off somehow?

Wizzard wrote:
Under the Wireless tab,select manual and disable the option "SSID Broadcast" and click on save settings.
That won't disable the wireless signal. It will only disable the SSID broadcast. The wireless is still accessible. It will still cause transmissions. The network is still accessible. The presence of the wireless router is still easily detected.
Only setting the network mode to "disabled" will disable the wireless radio in the router, i.e. powering it off.

Can I disable the wireless functionality and use Ethernet only?

Can you completely disable the wireless functionality and use the Airport Extreme Base Station as a wired internet router with integrated print server?

Yes. I do that. I don't use a print server but I was using that port for an HD. My AExpress connected to it is wired also.

Can I disable the wireless function on WRT54G???

I just installed a WRT54G, and I am currently only using the wired portion of this device. Is there any way to disable the wireless function until I need to use it?
Thanks,
Todd

Look at your router. I assume the "WLAN" light is on. If so, proceed:
Open your web browser and point it to 192.168.1.1.
Enter your user name (if any) and password.
This will take you to your router's setup pages.
Go to the "Wireless" tab, "Basic Wireless Settings"
Set "Wireless Network Mode" to "Disabled".
Click on "Save Settings" button, and wait several seconds for the page to refresh.
Exit your web browser.
Verify that the "WLAN" light on the front of the router is now off.
If it is, you are done!

I am in an internet cafe and my macbook pro can't find the wireless network available here. I have used this network before. I have restarted my machine several times too. help please

I am in an internet cafe and my macbook pro can't find the wireless network available at the cafe. I have used this network before. I have restarted my machine several times too. help please

Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
http://www.netspotapp.comNetspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting

I have the airport express as router can I buy the new airport express and use my old airport to extend my net?

I have the airport express as router can I buy the new airport express and extend my net?

Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands. The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device.

Extend wireless network with multiple airport express and netgear powerline

I currently have the following network configuration:
1. Using ATT u-verse (2-wire 3800HGV-B "modem") to internet
2. Disabled the u-verse modem wireless router, and have connected an Apple Time Capsule wireless router (on a DMZ)
3. Have four Netgear XAVB5001 powerline adapters connected to the time capsule (for our iMac desktops and the Apple TV)
4. Have an Airport Express wirelessly connected to the time capsule to extend range (for our iPhones and iPad)
All this is currently working. What I would like to do is the following, keeping 1-3 above the same:
4. Connect the airport express to the time capsule via Netgear XAVB5101 powerline adapter (instead of wirelessly connecting to the time capsule as it is today) and use it to extend the wireless range of the time capsule
5. Add ANOTHER airport express to the time capsule via powerline adapter (and extend the wireless range elsewhere in the house).
Does anyone have any experience with this kind of setup and can assure that it would work? (I'm trying to decide whether to spring for a couple more powerline adapters and another airport express)
Thanks in advance!
Dave

I had a VERY similar problem: I was trying to extend my wireless network using a hardwired ethernet connection from Airport Extreme to my Time Capsule. Every time I plugged in the wire to the TC, everything disappeared. Unplugged, and boom. Came back.
Here's how I solved it:
Go into Airport Utility and select the unit you are trying to use as a wireless extender and choose to edit it. Then, on the wireless tab select CREATE a wireless network. But, give it the exact same name and password. This is completely counter-intuitive. You would think to choose EXTEND, but this would be wrong. Next choose the network tab. And, select Router mode to Bridge (off).
By choosing the same name and password, your phone, laptop, etc. will think it's on the same network and move seamlessly from one to the other.
See if this fixes your issue. Fixed mine instantly. AND, it only took 3 painstaking hours of checking ethernet connections and rewiring jacks, etc. to figure it out. LOL

How can I disable the Wireless Keypad?

The touchscreen tablet chirps all day about a "Communications Failure" with the wireless keypad. The tablet itself and our iPhones are all we use to arm/disarm the system. Plus, the wireless kepad goes through batteries like nuts. How can we either disable the keypad, or disable the notifications?

I think you can remove the wireless keypad with the touchscreen. Go to settings, enter the installer code, find the keypad and remove it. If it burns through battery's it probably is too far away from the touch screen with not enough other devices in between. If you would place some other zigbee devices in between the keypad wouldn't need to increase it's radio signal to communicate.

How can I disable the wireless status LED (T61)?

When I'm working on my laptop and listening to, for example, online radio the wireless status led under the screen keeps blinking (data is being transmitted). I find this extremely annoying and distracting. Is there any way to disable the LED? (but obviously I would still need to be connected). I'm using windows xp on a thinkpad T61.
Help much appreciated!

i would use a black permanent marker or something, or a black sticker. This is the easiest and safest way of doing it, it is perfectly reversable.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

How can I disable the blue highlight on textfields in Safari and Firefox, using CSS?

Hi, I'm trying to disable the default blue highlight on textfields in Safari and Firefox. I can get it to work in Safari by using the following CSS code:
input {outline-style: none;}
This doesn't work for Firefox, though.
Can anyone help me to get it to work in Firefox?
Thanks in advance!

Are you referring the the border color or the actual field color?
For field colour see the section on the input tag.
However if it is the border color, this is set by the browser o/s, and cannot be changed with any 'cross-browser' technique, it can be changed in IE and other browsers using custom behaviors (IE), or by using custom skins (others).
But the skins are only enabled by the user, and changing the chrome of the browser for form fields using JavaScript would probably affect the entire browser anyway.
PZ

Can I disable the wireless part of my airport express and use ethernet?

Similar Messages

Maybe you are looking for