Can I do a clean install on a G4 titanium that has no screen?
My son gave me his G4 titanium which has no screen. He was using it with a cinema display for movies. I sold the cinema display and would like to sell the G4. But I want to do a clean install of Tiger (have disk) on it first. Alternatively I can just erase the hard drive on the G4 in target mode with my 12" powerbook. But I'm curious to know if there's a way to do a clean install on the G4 even though it has no screen. The G4 shows up just fine in target mode on my 12" and verified okay.
Thanks!
If I load the disk into the 12" it wants to restart the 12" to begin the installation which will kill the FW connection with the G4.
It will be picked up again during or after the restart process, or you could just hold off going into the Installer itself until the restart is done and the Titanium is in that mode.
(56155)
Similar Messages
-
How can I do a clean install of Mountain Lion?
I have an older MacBook Pro that I'm selling. I upgraded to Mounbtain Lion, but there was not an option to do a clean install (wiping everything clean and starting fresh). I want to do this to make sure all of my data is removed before I sell it. How can I do a clean install of Mountain Lion in order to accomplish this? In the past, from DVDs, it was easy. Thanks!
Budrew wrote:
Sure, but I would imagine that it will be common for people to sell their Macs with upgraded OSs.
That was only OK when you bought the Upgrade DVD and included both the original system discs and the disc you used to upgrade the OS.
Since Apple has now gone to the Download only model of OS X you now always need to install the Original OS or an Upgraded version that you have the DVD disc for.
If a Mac came with Leopard and you upgraded to Snow Leopard and then to Lion or Mt Lion you must remove Lion or Mt Lion and reinstall either Leopard or Snow Leopard and include all the discs for that system, Originals and the Upgrde Snow Leopard DVD.
If your system came Snow Leopard and you installed Lion or Mt Lion thenn again you remoeve Lion or Mt Lion and reinstall Snow Leopard and include the original discs that came with the system
If your system came with Lion and you upgraded to Mt Lion then you remove Mt Lion and reinstall Lion.
The reason for all of that is because with the Download only OS all upgrades are TIED to YOUR Apple ID, not to the computer. So the new owner can not reinstall Lion or Mt Lion, whichever you upgraded to, without using your Apple ID. -
How can I do a clean install after doing an update using a volume purchase license?
My question is this: We purchased 20 licenses of Lion through the Volume Purchase program. 2 of the users installed it first doing an upgrade - now they have decided they want to do a clean install. How can they do a clean install - I can't give them the installer cd we created because I have been informed by Apple Sales that it will use another license from our quantity of 20 - but they offered no other solution.
We would rather not waste another license just to do a clean install.
Thanks!Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
This method relies on the Internet Recovery system. This is the standard procedure when you don't have an installer or Lion came pre-installed. -
Can I do a clean install of Lion, onto my Mac Book Pro4,1, that is currently running 10.5.8? I have seen U-tube videos on how to do a clean install to Snow Leopard, and another from SL to Lion, but can zero out my HD, and do a clean install to Lion?
See this article.
-
HT1338 Can I do a clean install after using time machine backup?
Can I do a clean install after using time machine backup?
Hi, if I understand correctly yes, but may I ask the purpose of doing so?
-
Can you do a "clean install" after an auto update install of 10.10?
Can you do a "clean install" after an auto update install of 10.10?
If yes, how?I suppose it depends on what you define as a “clean install."
You can erase the startup drive and install Yosemite in Recovery.
Boot into Recovery (cmd-r on startup).
From there, use Disk Utility to Erase the startup volume (Macintosh HD).
Quit Disk Utility, then Install OS X.
You should obviously have a backup prior to attempting this. -
Hello people,
I can't update iPhoto after installing OSX 10.9.2, it has the name otto@**** in the apple ID box and will not let me change it. Any thoughts?
Thanks
<Email Edited By Host>You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, the App Store may prompt you to update "Angry Birds" or "Twitter," but the hacked app may be something else entirely. Don't make any assumptions about which app you're looking for. To find it, you must carry out a systematic search with Spotlight.
1. Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
2. In the Finder, press command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
Other...
A sheet will drop down. In that sheet, select
Raw Query
as the criterion, then click OK or press return.
Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
4. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Move each such item to the Trash, after quitting it if it's running. You may be prompted for your administrator password. Empty the Trash.
Quit and relaunch the App Store. Test.
If you find these instructions confusing, ask for an alternative method. -
Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?
No. 10.6.3 was the last retail release of Snow Leopard. Download the 10.6.8 Combo updater and put it on a flash drive to make it easier to install the largest part of the update.
Also, don't push the same disk image of SL to your Macs unless they are exactly the same model as it was originally installed on. The wrong hardware drivers will otherwise be in use. -
How can I allow the application to line through a field that has been locked after being digitally signed?
We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information. However we are receiving an error when attempting to enter data in the field which we have this edit. Error property: line through cannot be set because doing so would violate the document permission setting. any idea how we can get around this issue?You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.
-
How can I allow the application to line through a field that has been locked after being digitally signed?
We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information. However we are receiving an error when attempting to enter data in the field which we have this edit. Error property: line through cannot be set because doing so would violate the document permission setting. any idea how we can get around this issue?HI,
Kindly post this query in Acrobat forum:Acrobat
Regards,
Florence -
Here is my problem, I want to upgrade my macbook pro mid 2007 3.1 AA896ll/a to an Solid State Drive, a Crucial m4 256 gb, I want to know if the macbook will be able to handle it and how do I do the switch. also once I install the drive will I be able to boot from my Snow Leoard original cd and do a clean install. Thank you
Coming from a 5,400 RPM drive that's nearly filled up, fragmented and deoptimized to a fresh install of OS X on a SSD will of course be a improvement.
However fresh installing OS X on a new 5,400 RPM will also see a improvement, boot up in 30 seconds.
A fresh install of OS X on a new 7,200 RPM drive will also see a improvement, boot up in 25 seconds.
A fresh install of OS X on a new SSD will see the best improvement, boot up in 20 seconds on fast SATA connections.
OS X still requires time to setup and that takes about 20 seconds despite how fast your boot drive is, that's why sleep was created.
Things to consider: The higher cost of a SSD, the limiting capacity (hard drives hold way more up), the SATA I speed limitations (slows up on large file transfers), the difficulty to scrub the SSD of unwanted data (like you can a hard drive), and it's limited write capability. Also the smaller SSD's are faster than the larger ones.
SSD's are shock proof, which is their slight advantage over hard drives.
I see a 120GB SSD in a SATA I machine as being a waste, it's too small of a storage space (500GB+ is ideal), the SATA I connection is slow and other factors that make a 7,200 RPM drive a better option in that machine.
One can get a 750 GB 7,200 RPM hard drive for about the same price and still maximize their boot time in the process, also being able to scrub their drive of unwanted data easily.
SSD's can't be scrubbed, one has to fill 50% of the remaining space with many, very small files to overwrite the free space, then do another 50% again to defeat the Trim/wear leveling as SSD's write to less used location each time. If one fills a OS X boot drive up completely, it won't function or won't boot up.
If you do this fill routine regularly with software, then you prematurely wear out the SSD as it has limited writes. Why Disk Utility doesn't offer zero or 7x erase for SSD's.
If your in the 10% of Internet traffic that's going to adult sites, then the ability to scrub the caches and storage drive of embarrassing unwanted data is a necessity. Especially in the light of software and hardware that can read the SSD of deleted data.
Trick links and redirects on poisoned sites can firebomb your Mac with some pretty bad pictures and your hidden caches as well, especially if you don't like to pay.
IT personal have at their disposal free open source forensic software that basically aggregates all the past behavior done on the machine into a nice, easy to view format with times, dates and when and where content was downloaded from.
Since one has to give up their password for repair folks to recover data and fix the machine...
I think a SSD is less of a benefit over a 7,200 hard drive for that particular model of Mac for a mere few seconds faster boot time. -
How can I do a clean install of Snow Leopard with out losing iLife applications?
I bought my Macbook pro in 2009 and am currently running the Leopard software. I want to do a clean install of Snow Leopard, but I do not want to lose my iLife applications. I lost the DVD's that came with the computer. Is there any way I can do a clean install of Snow Leopard with out losing my iLife applications?
Will a regular installation of Snow Leopard allow the App store to recognize that my computer has iLife and mark it as a purchased item in my account. If it can, then would I be able to do a clean install and re-download the apps for free.
Any help would be appreciated!1. Install Snow Leopard normally; this will keep the applications intact. An actual clean installation involves either erasing the partition or creating a blank one, and neither of those will carry the applications over.
2. The previous iLife installation won't carry over to the Mac App Store, and the Mac App Store versions are incompatible with Snow Leopard.
(97485) -
How can I do a clean install of Leopard without the DVD?
My macbook pro is running very slowly and keeps popping up with a notification that the startup disk is full. I'd like to do a clean install but do not have the DVD. Is there a way for me to do a clean install without this disk? If not, is there an easy way to wipe the HD to speed things up?
You can call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a small fee, a replacement set of system discs (if available), can be ordered.
However, the discs will be for the original version of OS, that was pre-installed, when the Mac was manufactured.
Cheers, Tom -
Can't upgrade or clean install new Blackberry Link in Win 8 32 bit system
Hi Helpers,
I cant install the New BB Link version on my system - (the previous version ran perfectly).
Whether I try to update or clean install (old version now uninstalled). I get a pane saying that Microsoft visual C ++ 2008 Sp1 redistributable - W8 needs to be installed first.
The process starts that install - but alwayys fails. After that the BB Link install just closes.
I can't seem to attach any screenshots (be helpful to be able to 'navigate' to them rather than type in a path). But I havepasted below the full txt contained in the 'windows installer' pane that appears when the install fails.
Can anyone suggest any way to correct this problem please? Btw, the new BB Link installs perfectly onto Windows 7.
Thanks in anticipation. (On trying to post, I was informed that some invalid HTML has been removed - presumably that was in the 'paste' but I've no idea what it was or whether it affects anything, sorry).
Regards, gil69.
Re: BlackBerry Link v1.2.3.56 (Windows OS) install attempts:-
Windows ® Installer. V 5.0.9600.17415
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
Display Options
/quiet
Quiet mode, no user interaction
/passive
Unattended mode - progress bar only
/q[n|b|r|f]
Sets user interface level
n - No UI
b - Basic UI
r - Reduced UI
f - Full UI (default)
/help
Help information
Restart Options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user for restart if necessary
/forcerestart
Always restart the computer after installation
Logging Options
/l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
i - Status messages
w - Nonfatal warnings
e - All error messages
a - Start-up of actions
r - Action-specific records
u - User requests
c - Initial UI parameters
m - Out-of-memory or fatal exit information
o - Out-of-disk-space messages
p - Terminal properties
v - Verbose output
x - Extra debugging information
+ - Append to existing log file
! - Flush each line to the log
* - Log all information, except for v and x options
/log <LogFile>
Equivalent of /l* <LogFile>
Update Options
/update <Update1.msp>[;Update2.msp]
Applies update(s)
/uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
Remove update(s) for a product
Repair Options
/f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
Repairs a product
p - only if file is missing
o - if file is missing or an older version is installed (default)
e - if file is missing or an equal or older version is installed
d - if file is missing or a different version is installed
c - if file is missing or checksum does not match the calculated value
a - forces all files to be reinstalled
u - all required user-specific registry entries (default)
m - all required computer-specific registry entries (default)
s - all existing shortcuts (default)
v - runs from source and recaches local package
Setting Public Properties
[PROPERTY=PropertyValue]
Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.
Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.
Solved!
Go to Solution.I went back in the forum history to see Win 8 issues and how they were solved and found this post.
http://supportforums.blackberry.com/t5/BlackBerry-Link/error-1406-and-windows-8/td-p/3012108
I will see if I can find more as it does take a lot of time viewing each page one at a time. -
Can I do a clean install of 10.5 and use migration assistant from backup ?
I want to install OS 10.5 on to my Macbook. If I do a clean install rather than an archive and install can I then use migration assistant to transfer my accounts and emails from the cloned Superduper backup I have made on an external drive?
Or is Archive and Install better?I think 99.9% of the people know what you want to do by "clean" (ie, erase or reformat) and that insures there aren't any file or directory problems when you start, that the new OS is all that will be taking up space. Clean has two connotations: Windows or OS 9. There are lots of words that are "no longer used" but everyone knows what "initialize" or reformat means and does.
If you said, "Scratch that" you could mean, "scratch that idea" even though you can't actually scratch anything. And the idea isn't in stone (scratch out) or written with a pencil where you could erase the word or line. Or draw a line through words to "scratch out the line." There can be multiple meanings. Some languages have 5 words for "blue" to denote different shades of blue, and meaning.
Your drive is 60GB which is on the small side so that is one more reason to reformat.
And because installers will create and delete a lot of files, and scatter around, I would do another SD backup (and leave your old backup as is) so you have a copy of Leopard you can boot from and that would be just Apple OS (maybe after applying the 900MB of updates required to get to 10.5.4+).
Migration Assistant has posed some problems for some with how account data is imported into a new group account. Check out http://www.macfixit.com
Maybe you are looking for
-
Ipod touch is not working .... totally dead
Just purchased the ipod touch for my daughter-- (Christmas gift) it has shut off and will not do anything--- I have it on charge, but it will not even register on the screen that it is charging-- any ideas? it just shut off while she was playing on i
-
I ask because my iphone is full and yet I have such a small amount of playlists in my music and so very few photos compared to my friends, and even when I delete photos it still tells me I'm over capacity and the yellow section of the bar which is de
-
SRM 7.0 extended classic - attachments to backend
Hi, We are in SRM 7.0 and have a requirement to store SRM attachments in the backend ERP. This is for the extended scenario going through Badi BBP_ECS_PO_OUT. Has anyone got a solution for moving the attachments to the backend? Kind regards, Alexande
-
Hi Does MII has ability to queue message? Where can I see the queud message? For example, if I would like to send a transaction message to a system (for eg ERP), but ERP was down, what happen to the transaction? -Will it be queued untill ERP is up ag
-
How do I download a previously purchased Lightroom 5 program?
I have previously purchased Lightroom 5 and want to install it on a new,computer. When I open Creative Cloud it says my "trial" has expired and wants me to pay for it again. How can I get my program back?