Can I do an "Echo Reverb" on an audio recording in a track?

I have been trying to find some kind of echo reverb on a track that I have recorded in Logic Pro and would like to apply an echo reverb on that track.
Hel!
Thanks

No. I don't think Logic can do that. But check the manual*. I MIGHT be wrong.
*search for "reverb", "bus send", "aux bus" or "insert effect". I doubt you'll find much though.

Similar Messages

  • Can't turn off echo/reverb in GarageBand

    I cannot seem to turn off the echo and reverb effects in GarageBand '08 on my iMac. The boxes for them are unchecked on the "Real Instrument" track, and I've also unchecked them on the Master track, but the effects are still on. What could be causing this?
    thanx

    Just to make sure you didn't overlook the obvious (we all do it more often than we care to admit). Can you toggle the other services in the Sharing pane? Perhaps you just need to click on the padlock and authenticate before you can make changes.
    Second thing to try. Make sure System Preferences is not open. Look in the user's Home folder/Library/Caches. Find a cache item com.apple.preferencepanes.cache. Delete this item. Log the user out and log back in. Now open System Preferences and see if you can make the changes.
    Third thing to try. Here are the items that get changed in the /etc/cups/cupds.conf file when you turn Printer Sharing OFF---
    line 55 becomes
    ServerName 127.0.0.1
    lines 453 and 454 become
    #Port 631
    Listen 127.0.0.1:631
    line 581 becomes
    #BrowseAddress @LOCAL
    line 635 becomes
    BrowseInterval 0
    line 826 Allow From @LOCAL
    is deleted and the block from line 822 through 826 becomes
    <Location />
    Order Deny,Allow
    Deny From All
    Allow From 127.0.0.1
    </Location>
    All these changes are taken from a modification of the default cupsd.conf as supplied with the version of CUPS Apple supplies with Tiger. The cupsd.conf that comes with version 1.2.x is most likely different. You will have to do some comparison and interpretation.
    Hope this helps.
    EDIT: Don't forget to recycle the cupsd whenever you make a change to the configuration file.
    sudo killall -HUP cupsd
    Matt
    Mac Mini G4; B&W G3/300

  • Hi, with mix16 pro app, can anyone tell me when you set different audio levels for different tracks, does the app remember the level set the next time you use it?  Or does it default to the original setting when you power down after a show?  Thanks!

    Hi
    I use backing tracks for some songs with a live band and we are having some issues with levels.  Some are higher than others etc.  I use i pad to run the tracks.  I am looking for an app that where I can control the levels better.  Ideally, an app where I can set the level of each track to a desired level and leave it at that level for good.  Mix16 Pro  seems to do that but I wonder does it save the setting as I do not want to set the levels every time I use it.
    Thanks

    Hi
    I use backing tracks for some songs with a live band and we are having some issues with levels.  Some are higher than others etc.  I use i pad to run the tracks.  I am looking for an app that where I can control the levels better.  Ideally, an app where I can set the level of each track to a desired level and leave it at that level for good.  Mix16 Pro  seems to do that but I wonder does it save the setting as I do not want to set the levels every time I use it.
    Thanks

  • Adding echo/reverb instead of removing it

    I want to add a trailing echo/reverb to the end of a retrospective narrative, one that fades away repeating the last syllable. Any tips?
    Would like to stay in FCP instead of export/import thru Soundtrack Pro.

    Extend the end of the clip and play with the echo delay time. Basically, experiment with the effect parameters until you get what you want. Might try adding some reverb using the different room presets as well.
    You can also keyframe these effects to gain more control of how the come in and out.
    Have Fun
    rh

  • Reducing Echo/Reverb

    Hello there.
    I have a video clip in Premiere Pro with audio that has significant echo/reverb. Can anyone recommend how to reduce it in Soundbooth? Here's the clip.
    https://vimeo.com/118854459
    Thanks,
    David

    Hi,
    This is most likely going to be about the way the TV sound fills the room and the distance from the TV sound source to the Mic.
    Similar issues can appear with External Speakers for computers.
    A more directional mic may help.
    With Computer speakers you can point them in different directions, essentially away from the Mic with very little difference to the sound your ears pick up.
    In this case you are going to find it hard to balance the sound Output and the Mic pick up.
    I would consider using a USB headset (even if the TV is still the sound Output).
    9:52 PM Thursday; August 12, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Audigy Rx Constant Echo / Reverb

    Hi, I hope someone can help as this is driving me mad.
    I have an Audigy RX and when I log in there is a constant Echo / reverb that is very strong.
    I can cancel this out from the creative control panel by changing the Mic settings from Karaoke to Chat. But the moment I log out and back in, the effect returns.
    I have been through all the EAX settings and they are ALL turned off, but the issue remain.
    How do I make it stop???

    Hi,
    By the looks of it you'll need driver Uni Pack http://ie.europe.creative.com/support/downloads/download.asp?MainCategory=&sOSName=Windows+XP&regi on=3&Product_Name=Li've%2&Product_ID=4857&modelnum ber=&driverlang=033&OS=0&drivertype=0&x=27&y=0 .
    Incidentally if you have an SB Li've (original) under XP and have installed the software off the CD you should de-instll this and the drivers as well as find and rename the file ctmm32.dll. The software on the CD (original) is for 95/98 only. For 2k and XP you will get problems.
    There is an update CD available or you can download the core ap
    ps.
    Hope this helps,
    John

  • IPod Playback on iPhone Has Unwanted Echo/Reverb

    All iPod playback has annoying echo/reverb sound. Is this a software issue or maybe a back earbud connector? I've tried several earbuds/headphones and the problem is the same each time. I've also tried restarting.
    It's running Version 3.0 software.

    Same problem. Echo/reverb only heard on saved podcast playback. Streaming audio/podcast is fine. Phone call sound with external speakers is fine. Same reverb heard with and without earbuds. iphone 3G with OS 3.0.1. I have tried reseting and erasing all. Same problem on recover from backup. I guess if I had the time I would reset and erase, then reinstall just OS 3.01 and retest. Maybe a conflict with one of the apps? Recent apps I've loaded include NPR News, KAYAK, reQall, Racers, and Medscape, but my kids are always loading new game apps.

  • How do you control echo, reverb, etc?

    How do you change the echo, reverb, etc. for a given instrument or set of notes?

    Dr_Jezz wrote:
    Ahh - I see - that's a very British turn of phrase for a Hamburg address, I must say Spheric!
    Spent a portion of my formative years in the Commonwealth.

  • Reverb not working on recorded tracks

    I have a problem. I am trying to add reverb to some audio tracks that I recorded directly into Garageband. I move the slider around and there is no change in the reverb on the track. Also when I am listening to the song and I click on a new vocal present that has reverb built-in then for second or two garageband plays it appropriately with reverb, but within a second or two there is a small click and the reverb is gone. All the other preset effects still work, but the reverb drops out. I can not find anyone else who has had this same problem. I have tried reinstalling Garageband, but it did not work.
    Thanks for any help anyone can offer.

    first thought, read the last bit for entry on the Master Track effects:
    http://www.bulletsandbones.com/GB/GBFAQ.html#mastertrackreverb
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

    I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.

    jamestait wrote:
    when I record, my previous track data keeps getting overwritten.
    since you didn't specify, are you recording in a single take?
    http://www.bulletsandbones.com/GB/GBFAQ.html#multipassrecording
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How can I use my iPod Touch as a voice recorder?

    How can I use my iPod Touch as a voice recorder for long recordings, like 45 minutes? Is ther an app for that?
    I believe I have a Gen 4, but there are no identifying marks on or in it.
    Thanks

    Use the built-in Voice Memos App. That si covered i the Manual
    manuals.info.apple.com/MANUALS/1000/MA1657/en_US/ipod_touch_ios6.1_user_guide.pd f

  • How can I delete the video and keep the Audio  in a few frames using Imovie 11

    How can I delete the video and keep the Audio  in a few frames using Imovie 11?

    I've met the problem too before. but i solved it with  Audio Converter Mac instead of iMovie. If you have similar situation that just want to keep audio but not video, and if your file format is not workable in iMovie, you can use the Audio Converter for help too. it can easily help to extract audio soundtrack from any video format. Or if you need to convert one audio format to another, it is a good choice too, because it supports many common audio output formats.
    <Link Edited By Host>

  • How can I copy an audio recording in Skype?

    I have an audio recording of one of my contacts on Skype. 
    Can you tell me if there is a way to copy this recording to my hard drive and if so how? 
    Can I do it with MP3 Skype Recorder 4.11 and if so how?  Where would it be recorded to if I can do it this way?
    Any help with this will be really appreciated
    HB

    I already have a Skype recorder for any incoming or outgoing Skype or telephone calls.  I use MP3 Skype Recorder for that.   What I'm trying to achieve is different.
    I have an existing voicemail message in Skype itself from one of my Skype contacts.  It is this voicemail message that I want to save to my hard drive somewhere so there is no chance of me losing it in Skype itself.
    I right clicked on the recording and there is an option in the context menu to 'Copy Message.' I clicked on this but I don't know where to save it to on my hard drive so I can play it whenever I want from there as a file.
    I would also like to know if there is any way to change this voicemail message to another file format to play on my hard drive.
    Can anybody help me with this scenario please?
    Thanks
    HB

  • How can i use in the same time input line and mic to recorder in several track whit SONAR

    I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
    Thank you. Sorry for my english

    LIMACAR wrote:
    How can i use in the same time input line and mic to recorder in several track whit SONAR 4. I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
    Thank you. Sorry for my english
    Depending on which soundcard you have there, but if your card is capable for
    ASIO -> activate I/O drivers on Sonar/Options/Audio/Drivers -tab (mic/line sources should be listed there --> activate) and select the mic or/and Line sources on tracks "I" - dialog
    WDM/KS -> use the Surround Mixer or windows recording controls for recording source selection (mic should be listed there)
    MME32 - > same w/ WDM/KS
    If you use Asio4All --> same w/ WDM/KS & MME32
    No mic and line source simultaenously w/ WDM/KS and MME32.
    You perhaps be able to do this w/ kX drivers.
    jutapa
    ADDED:
    You can also install modded version of Audigy 2 drivers/software but I have never done this w/ Li've! 5. so I can't be sure if you get ASIO support for your card.
    Here are the instruction --> http://www.tech-pc.co.uk/audigy-2.php
    jutapaMessage Edited by jutapa on 05-25-2006 02:48 PM

  • I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

    I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

    What version of Premiere Elements and on what computer operating system?     Elements 13 on Windows 7
    What is the brand/model/settings of the camera that recorded these videos?        ony  PMW 320
    When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
    the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
    the video in the Premiere Elements Editor, how many channels does the Audio Meter display?   
      I just drag and drop video and when playing back only channel 1 will appear
    What is your intended export for this video in terms of audio as well as video compression and formats?    MP4
    I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
    Thanks for the help if possible,Kevin416 873 8374

Maybe you are looking for

  • Clearing stock in transit (MB5T)

    I am unable to clear the stock in transit.   We do not necessarily need to receive these small quantities, it would be acceptable to write the stock off to clear this report and remove this stock that does not really exist. I have tried using the Tra

  • How to add prefix to standard PO sequence.

    Hi all, Requirement is how to add prefix to Purchase order number auto generated sequence.

  • Ios 8 update file downlode only

    ios 8 update file downlode only

  • When do I use unary plus operator?

    When would I ever use the unary plus operator? It seems to me to be a pointless operation since +x never changes the value of x.                                                                                                                          

  • Complete manual for Nokia 5800 Express

    Hi, Is there a complete manual for the 5800.  I don't mean the one supplied in the delivery box. I like to get a more detailed manual Is there one? And if so any link... /Pelle