Can I do this with a wireless access point?

When I travel to Mexico on vacation (3-4 four times a year, one of the benefits of being 60+ and retired), I pay $70 for high-speed wireless access in my room.
In the past I've taken a Magic Jack and a regular phone, plugged the MJ into a USB port on my computer and used it to phone back to the states (keeping in-touch with the kids and grandkids).
My new Samsung smart phone connects to my wireless network at home and I make/receive call through the Internet (instead of using My Smart Choice prepaid mobile minutes).
Since the wireless controller in my PC is being used to connect to the wireless network at the Mexico hotel, I can't setup a wireless ad hoc network from it. So, I'm wondering if I can plug a WAP into the Ethernet connection on my PC, set-up a local wireless connection via the WAP device, and then connect my smart phone to the local WAP wireless connection for outgoing and incoming calls?
If this is possible, can someone please recommend a good WAP device to use?

Thanks for the input to my question!
I did find a solution to my issue: my phone has Bluetooth and I connect to PC that way. Once I'm connect to the PC, I can send or receive calls through the wireless network that's attached to the PC. The Bluetooth range isn't as far as I'd like--but it works beautifully well!
I got to say, Samsung phones are really cool! I loved my fir iphone--but for me the Galaxy sII is a better device (and I bought it used on CL--who says old people don't rock!!)

Similar Messages

Can I use this as a wireless access point for my network

can I use this as a wireless access point for my network

umm... use what?
A Time Capsule? Sure. It's just like many other wireless base stations. It can run in either bridge or route mode - in bridge mode it's just like an access point linking the wired and wireless networks together.

Can an iMac serve as a wireless access point server?

I have a current iMac with standard built in wireless capability but I'm on the net with wires (RJ45 twisted pair ethernet CAT5 cables). Can my iMac serve as a wireless access point for a new device in the house (Nintendo Wii)? Is there a setting I can turn on, or software that can be downloaded to have the iMac act as a server instead of just a client on a wireless network? I know that it's best to have dedicated hardware do this, but I'm looking for a software solution to use while I decide what to buy.
Currently I have a DSL connection and a star style home network. The DSL modem has an ethernet cable to a hub, and our 2 macs connect with wires to the hub. (I have an older DSL modem that has no wireless capability, I know that upgrading the DSL connection involves a new modem that includes wireless, but the phone company makes no guarantees about supporting Macs, so I have to do some research first.)
-Ken

If your iMac connects to internet from ethernet cable, you can use airport to share the connection wirelessly by creating a network from airport, then go to system preference > sharing > internet and enable internet sharing. But if you already have a wireless router, Mac should be compatible, there is nothing inherently different between iMac's airport and PC's wireless card.
For Wii, I have no experience myself but there are plenty of posts on this forum, like this one: http://discussions.apple.com/thread.jspa?messageID=4528652&#4528652
(linked to http://www.virtualmatt.com/?p=7)

How can I get alerts if a Wireless Access Point has been disconneted from the network?

How can I get alerts if a Wireless Access Point has been disconneted from the network?
Is it possible to get alerts via email from the WLC or WCS if Access-Point has been removed from the network?
Thanks in advance.

Hi,
The below link will answer ur question!!
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0event.html#wp1229996
Please dont forget to rate the usefull posts!!
Regards
Surendra

Can I use this as a network access point?

Very interested in this as a way of playing my iTunes music through my amplifier, but as I also need a wireless access point I'm wondering if this will do both jobs.
I already have a wireless network, but after moving the router no longer have access to it from my Xbox or PC. Does anyone know if I can use the AirPort Express as an access point?
What I want to do is connect the PC and Xbox to an old switch I already have, and connect that switch to the AirPort Express, connecting both devices to my wireless network.

I am sure.
From KB 108040, AirPort Express: What is client mode?:...In client mode AirPort Express does not offer itself as a wireless access point or use its Ethernet port....
Wireless Distribution System is another way for AirPort Express to join an existing Wi-Fi network. AirPort Express uses its Ethernet port and can offer its wireless access point in WDS mode, but it requires that your other access points be AirPort Extreme and/or AirPort Express...From KB 108038, AirPort Express frequently asked questions (FAQ):
2. Question: Can AirPort Express act as a bridge?
Answer: AirPort Express can act as a bridge in three different ways:
If you have an existing wired network, it can bridge this network to wireless clients.
If it is set up as a WDS remote or relay station, it can bridge the wireless network to wired clients.
If it is set up as a WDS remote or relay station, it can bridge the wireless network to wireless clients (or "wirelessly extend" the range of the network).

Can WRT54G be setup as a Wireless Access Point?

Does anyone know how to setup a router (WRT54G) to connect to other routers using a wireless connection and function as either a wireless access point or another router using the main router for it's internet and network connection?

you cannot get the WRT to connect wireless to any device as it is an access point.
However this same thing will work wired. All you need to do is change the LAN ip of the WRT to 192.168.1.50 from 192.168.1.1 and disable the DHCP on the WRT.
Connect both devices LAN to LAN , do not use the internet port of the WRT.

Mac mini not keeping connection with Cisco wireless access point

I am trying to get my wife's Mac Mini to keep it's connection with the wireless network at her school. They are using a Cisco access point (not sure of the model) which works fine with my G4 Powerbook and the numerous Macbooks being used there, but for some reason her Mac Mini drops the connection after 4 or 5 minutes, at which point she needs to log right off for it to reconnect (as opposed to just turning the card off and on again). I have already gone through the deletion of the Networkinterfaces.plist file, and recreation of the Airport card profile process, but this only kept the interface active for about 36 hours, then it was back to the same old problem. At this point I am thinking "flakey card"...before I ship it off to Apple, can anyone offer any other possible solutions?

After spending time on the phone with a Apple support technician, he indicated that the Iphone has a compatibility problem with the wep key encryption that the Cisco appliance uses. I find this disturbing being that Cisco is the biggest in network gear. What's UP Apple? We need SP1 for the IPHONE!!!

IPhone will not sync with Cisco Wireless Access Point

This is unbelievable, i just bought a $1000 phone and it wont sync with a Cisco AP. I can sync it with a DLINK? I there a specific list of Access Points it will connect to. If so thats complete bullsh*(. Also, is there going to be a firmware update soon to fix these problems. Can you tell that im a little upset. I just saying that if someone spends $1000 dollars on a phone it should be working pretty dam good. Anyway can someone offer any suggestions?
Upset Iphone user.

After spending time on the phone with a Apple support technician, he indicated that the Iphone has a compatibility problem with the wep key encryption that the Cisco appliance uses. I find this disturbing being that Cisco is the biggest in network gear. What's UP Apple? We need SP1 for the IPHONE!!!

Anyone know how to set up mac as a wireless access point?

thats pretty much my question, i wanna access the internet on my nintendo DS and Wii

Hello and Welcome to Apple Discussions.
Although I'm not familiar with the Nintendo DS you can use the iMac as a Wireless Access Point by going Apple Menu > System Preferences > Sharing > and selecting Share Connection from: popup menu: however you connect and the choose Airport to share to.
This article refers.
Merry Christmas
mrtotes

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

Apple TV 2G (Airplay and Homesharing) can only stream from devices on the same wireless access point range??

connection:
40 Mbps Fiber Broadband connection using:
Devices:
1. Main Modem/router (AP1): Huawei HG8245 (provided by ISP) - Wireless enabled.
2. Remote Access point (AP2): Linksys/Cisco E3200 Wireless gigabyte router flashed with DD-WRT v24-sp2 (06/14/11) mini (Cascaded -wired- LAN to LAN from main modem).
3. Wireless Repeater to cover a dead spot (AP3): Linksys/Cisco E1000 wireless repeater.
4. Apple Tv (AT2G) with home sharing/airplay enabled.
5.( Ipad) with home sharing on itunes enabled.
6. Win7 (PC) using iTunes with Home sharing enabled.
all devices are updated to their latest firmware.
In order to cover a large 3 story house with Wifi. I had (AP1) is located on the first floor, while (AP2) is located in the basement floor directly wired by LAN to LAN with (AP1). (AP3) is located on the Ground floor away from the living room to repeat wireless network into the back yard. While (AT2G) is located in the living room on the ground floor right in the middle of both (AP1) + (AP2) while connected via Wifi.
Network SSID, security, passphrase and wireless settings of (AP2) are identical to (AP1) to create a single big LAN/WLAN roaming network where all devices connected to both wireless access points can find/share the others. As understood, it's refered to as bridging.
I have noticed that my iphone/ipad does not show the airplay button anywhere within the wireless network. it seems that the apple TV randomly choses to connect to the AP with stronger signal, or switch to the other in case of a reboot to one of them.
to elaborate further, if i was sitting in the living room (groundfloor), trying to airplay some you tube contents via Wifi to my Apple TV, i may not find the airplay button available all the time, i found out the reason is while i'm wirelessly connected to AP1, the Apple TV was connected to AP2 and both deviced cannot detect each others to enable my purpose. that goes the same for Home Sharing. only if my Ipad/PC and Apple Tv are on the same wireless AP. they would detect each others immediately.
although, the second AP (AP2) is suppose to extend my wireless network of the same subnet in which any device connected can be found.
After all sorts of trial and error tweaking my router/access point, I thought the problem would be due to the Linksys 3200 capability of bridging WLAN and lacks few protocols that enables my purpose. i have flashed the firmware to a DD-WRT, but again, problem was not solved.
I have not tried having my Apple Tv wired to either router/AP, but i assume it may work well if i do so. i still need to solve this wireless connection issue though.
Am i the only one with this problem, would there be something wrong with my setup?
Your feedback is highly appreciated.

You may or may not already have your network set up correctly, it's just that I can't tell from what you have said.
I have a main router provided by my ISP, I have several other Airport Extremes and Airport expresses connected by Ethernet, all set up to bridge the network created by the main router.
Each maker has their own settings, but bridging should be reasonably obvious. In simple terms my main router distributes IP addresses to all devices, the Airports bridge that network by passing these addresses to the devices from the main router. A base station that isn't in bridging mode will distribute its own addresses to the devices connected to it.
I don't really follow your next point.
instruction for configuration vary from manufacturer to manufacturer, the best course of action here is to refer to the manual. If everything is set up properly the addresses of everything on your network will have identical sets of numbers for the first 3 of 4 groups of numbers that make up an address, the last set must always be different. I think the part you are referring to with your DD-WRT is the option to have Ethernet and wifi bridged or not.
Some routers may be easier to configure than others, but generally speaking they should all work with the Apple TV. 5Ghz is less likely to suffer interference but it is much more likely to be blocked by solid objects, it may or may not be an advantage.

IOS 6.0.1 - Problems with certificate based authentication on wireless access point

Hi all
We are using iPad 2 as order terminals in our shops for about 5 months. Some of the iPads (the first who entered the field) started to cause problems now. These iPads are no longer able to keep long-term connection to the wireless access point in our stores. After selecting the SSID a successful authentication using the stored EAP-TLS certificate is performed (this can be seen in the log files of our wireless controller and by the IP adress that is given by DHCP). But within seconds the affected iPads opening up a captive portal page (empty, without contents) and separates the connection to the SSID after a short time again.
Affected are currently only iPads 2 with iOS 6.0.1, which were staged about 5 months ago. The newer devices with iOS 6.1+ connect without problems and open no captive portal page. The first cases occurred on the last Wednesday. Before that everything worked without difficulty. No modifications took place on the security structure. The numbers of affected devices increased until all iOS 6.0.1 were affected.
Access to other SSIDs (without use of certificates, by entering a key) for the devices is still possible (the devices does not open an captive portal page). The DHCP scope is not used up, so there are enough IP addresses available.
"Newer iPads" with an iOS of 6.1+ are are showing no problems on the same wireless access point, where the older devices are rejected. New and old devices use the same certificates and authentication mechanisms.
In the analysis of the issue, it turned out that the problem can be solved by an update to iOS 6.1.3. Subsequently, the iPads will be able to rebuild a connection with the access point, without a captive portal page.
Since the bandwidth is very narrow dimensioned in our stores, the communication of the iPads was severely restricted. Thus, the iPads are for exampleare accessible for the APNS but can not find iOS updates or check for their availability.
A comprehensive update to iOS 6.1.3 is currently excluded.
Does anyone knows this issue? What else can be done (except from updating)?

I will answer my own question in case it helps anyone else.
It would "seem" the ios 6 devices try the proxy and if that is not working they resort to the def gateway.
To Fix I did the following:
Brocade WIFI network has IPS and Advanced Firewall rules that seemed to be tthwarting some traffic, the iphones would then try the default gateway and be blocked at the FW.
I disabled the IPS and the Advanced Firewall Settings on the wifi as they are redundant to our main IPS and firewall that all traffic flows through anyway. I will tune it later, but when the CEO is demanding a fix "**** the security, full speed ahead"
Created some rues on the firewall to allow...
- IMAP-SSL (port993) outbound
- SMTPS (port 465) to yahoo servers outbound
- tcp port 587 to yahoo servers outbound
- https to akamai servers
Most http and https goes through the proxy as it should, BUT...
It seems that the akamai traffic allways ignores the wifi proxy settings and just heads straight for the default gateway. I suspect there is a bug in the icloud app?
Hope this helps someone else.
-Bo

Can I disable my Verizon Fios Router Wireless radio, connect it to a switch and use my airport express as my wireless access point connected to an in wall ethernet port?

Here's the deal. I have a Verizon Fios MI424WR router. My house has CAT5 throughout the house. The media panel is located in the garage. I want to take the Verizon Fios Router and cannot it in the media panel so I can connect a switch to it, that way, all my CAT5 can fire throughout the house. Verizon being Verizon decided to connect the router directly in the office.
Can I go this route (Router in media panel, switch cross connect to it) and use Airport Express, connected to one of the in-wall CAT5 ports in my house and then set it up as my wireless access point to provide wifi to my portable devices (iPad, iPhone, Macbook)? Is this possible? Will Airport Express comminicate with my verizon router via ethernet in-wall? Do I have to turn off the wireless radio in the Verizon router? Any help would be greatly appreciated!

That is right, by hard wired I was just making clear wired vs wireless attachment. AirPort family of devices will only act in a repeater mode with their own family members, not FiOS routers. they have to be wired to work.
There are some useful docs you can download from Apple, Support, Manuals, Peripherals, AirPort (just follow thos links from the Support button on the top bar):
Apple AirPort Networks
Designing AirPort Networks
AirPort Express Setup Guide
The last has a diagram of what you are trying to do, though without the house wiring, etc., but the basic principle.

I can't get my macbook to access shared files on a windows computer when it's connected through a wireless access point.

I recently bought a Netgear Wireless Access Point to use in the office so we can have a wireless network. I configured the wireless network, and I am currently connected to the internet. However, I no longer can access the shared files on the Windows computers like I could when I was hardwired in with an ethernet cable. I've disabled all of the internal firewalls on all of the computers (and there's no firewall built into the WAP), all the computers are on the same workgroup, and I've tried accessing the computer with the shared files directly via the IP address using the instructions found here http://docs.info.apple.com/article.html?path=Mac/10.5/en/8849.html.
My computer sees that the other computers on the network are there. They show up in the network view from the finder. However, when I try to connect to them, it tells me the connection failed. When I click connect as, it says:
"Connection Failed
"The server “PC-ASSISTANT” may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
When I try to connect via the "connect to server" on the finder, I type in "smb://10.0.0.103/Word Processing" It tells me:
"There was an error connecting to the server “10.0.0.103”. Check the server name or IP address, and then try again.
If you are unable to resolve the problem contact your system administrator."
I have no clue what the problem is. I'm not really an IT person or a networking guru. Can someone please help?

You posted in the Older Hardware forum, which is for pre-year 2000 hardware. Suggest you post your question in the Airport forum at https://discussions.apple.com/community/wireless/airport
 Cheers, Tom

Can I use iMac as wireless access point?

My network equipment: ADSL modem (which has no integrated wireless) with Buffalo AirStation (802.11b) wireless access point
I have had a reasonably stable broadband situation for a long time (hence the ancient equipment!) and have been able to access the internet via my ADSL modem/ethernet router using ethernet wires from my iMac G5, and two desktop PCs running Linux and Windows. I have also been able to access via the wireless Buffalo Airstation on various laptops over the years. My wife's brand new MacBook has been connecting wirelessly for a couple of weeks.
Until last night...
Then the AirPort signal dropped to zero and a neighbour's network was suggested as the network I need. I looked at the Buffalo Airstation and there was a flashing red light (and flashing green ones as well). Being an experienced chap I turned it off and turned it back on! For about five minutes the Airport signal was back. Then it disappeared with flashing lights as before. Repeated a few times with no change...
I don't know if the problem is related to the neighbour's wireless signal or not but I decided that it could be the AirStation getting flaky so I tried creating a network on the iMac with a view to sharing its wired connection.
I can log on to this iMac network from the MacBook and I have changed the Systems Preferences to share the connection on the iMac but the MacBook says it is not connected to the internet. Anyone got any ideas what I might be doing wrong? Should I be entering the ADSL modem router in the internet connection details (which is what I have done) or should I be entering something else?
Is what I am trying to do even possible? I haven't found any exact parallels in the documentation or the forums...
Any help greatly appreciated!

Does the Buffalo AirStation allow you to change the channel being used?
You can share an Internet connection over Ethernet to other computers using Airport. You set it up in System Preferences Sharing pane Internet tab (if using Tiger). On the MacBook, you should just use the default +Configure Using DHCP+ setting. Be sure you clicked to Start the sharing on the iMac. On the MacBook, be sure you select the wireless network that is the iMac's name.

Can I do this with a wireless access point?

Similar Messages

Maybe you are looking for