Can I do this with airport express?

We have a LAN (3 pc's wired connected) and a wireless router for serving an iphone and a laptop (wireless) This router (not an Apple router) is also an ADSL modem and is wired connected to our LAN providing internet.
We have another computer with only ethernet port (not wireless) in another room. Is it possible to connect this pc to an airport express via ethernet, and make it join our network? How we can call this? Client mode, bridge mode, extend our wireless network?
OR we must have an apple airport extreme to do this (as the main router?)

The wireless usb adapter, can connect directly to the main wireless router...
Yes, that's correct. You could always use the old Express for streaming AirTunes if you wanted, or connect a printer to the USB port to allow multiple devices to use the same printer over the network.
If you travel regularly, and the hotel has an available ethernet port, you can setup your own wireless network in the room and usually connect multiple devices.
Finally, if you don't want the Express, I would be happy to take it off your hands

Similar Messages

Will be renting a condo with an ethernet cord. Can I plug this into Airport Express and have wifi?

I will be renting a condo with an ethernet cord available. Can I simply plug this into my Airport express and have wifi for computers, iphone, and printer?

As long as the Ethernet cord leads to a router connected to the Internet, then yes, it will do all that.
What you want to do is the reason a lot of people bring an Airport Express with them on trips. They plug it into the hotel room Ethernet port and bam, their laptops and phones have wireless Internet.
If you don't already have a password on your Airport Express, now would be a good time to add one, especially if Internet usage is metered. Just to keep others from getting onto your network.

Can I do this with AP Express??

I have an older AP express, and a G4 with a round AP Extreme base station plugged into my cable modem. The G4 doesn't have an AP wireless card, and I use the ethernet from the AP base station for internet connectivity for the G4. The wifi network serves a PC laptop and my iPhone. Can I stream music from my G4's iTunes to the AP express (and on to me stereo receiver in the next room) with the set up above, ie: without the G4 having a wireless card? I tried AirPort Utility set-up, but it only recognizes the base station, not the Ap Express. Thx.

Hello famdog. Welcome to the Apple Discussions!
Can I stream music from my G4's iTunes to the AP express (and on to me stereo receiver in the next room) with the set up above, ie: without the G4 having a wireless card?
Yes. In your configuration, the iTunes on the G4 will stream, via Ethernet, to the AirPort Extreme Base Station (AEBS). In turn, the AEBS, will then stream wirelessly to the AirPort Express Base Station (AX). (Note: This is depicted by the image on page 17 of the AX's Setup Guide.)

Can't extend network with Airport Express on Sky Broadband

Hello,
I'm having some difficulty that's driving me bananas!
I've recently moved house and got Sky Broadband. They sent me their Sagemcom router and the setup was easy. I thought I'd do what I always do. I'll connect my Time Machine to it via ethernet, and connect via Time Machine's network. Then I have two Airport Expresses in the house to extend the network and use Airplay etc.
I can set up the Expresses with no problem, everything talks to everything without a problem and the lights are all green but the network isn't getting extended with either of them. I refuse to believe they're both broken as I also borrowed an Express form my Dad's house (which extend the network without a problem) and it doesn't work with me.
Extend my network is checked in the Manual Setup in Airport Utility but for the life of me I can't get my network extended.
I have done tests where I replaced Time Machine and made one of the Expresses the main base station and it throws signal out easily like that but I can't extend that network with the second Express.
I followed this thread https://discussions.apple.com/message/13171691?messageID=13171691 and have tried a few things to no avail. Currently I have configured an old Airport Extreme (just to keep testing) which works great and have set up an Express wirelessly. All lights are green and the settings seem to all be correct. I turn wifi off on my computer and connect to my computer from the Express using ethernet and nothing. Should I get a connection like this?
Is it Sky? I have read in a few places that Sky have disabled the ability to extend their network but I'm not eve using the signal from their box.
Any ideas or thoughts will be gratefully received.
Thanks in advance.

OK so I've been tying it out but unfortunately to no success. Everything looks fine and all lights are green but the network isn't getting extended - just as before.
Click the Wireless tab
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the Time Capsule network
Check Mark next to Allow Wireless Clients
I don't have an option to extend a network, only to join: http://flic.kr/p/a222kR
I do get the option though if I use the guided setup, even though it doesn't work: http://flic.kr/p/a24TQQ
I did try one other thing though. I set up the Time Capsule and it works great. Then I tried instead, to use my Airport Extreme to extend the network. The Extreme did give me an option to extend the network in the drop down menu and a checkbox to Allow Wireless Clients, unlike the Express. I do believe that this is now working. I now need to find the best place to put it to extend the range.
My Expresses are only 802.11g so they're pretty old but as I said, it worked at my Dad's house but not here. Does it make a difference that the Airport Base Station at my Dad's house is an older UFO shaped Snow Airport? I'm becoming suspicious that seeing as I've only ever lived in small houses and apartments that maybe they never worked?? I've recently moved into a more spacious house so could this be the problem?
One final test using iStumbler showed that it could see Apple Network XXXXxX until I configured it. Once it was configured it disappeared from iStumbler. The Airport ID number had gone from the list.
Do I need newer n compatible Airport Expresses then? So many questions pop up now... When I turned my Express into the base station (which only throws out a g network) then surely I should be able to extend to the next Express (which is also g only)? It still didn't work. The Express are on version 6.3 by the way. Having the Extreme extend the network is a good start but I also need the others to work too. Do you think I'm correct in my assumption?
How about WDS, could that work? Will WDS slow the network considerably?
Sorry if this message is rather long and garbled and again, thanks for your interest and advice.

HT204057 How can I back up with AirPort Express? I have a flash memory.

I want to back up my Mental case 2 information. How can I do it with my AirPort Express?

Sorry, but the USB port on the AirPort Express does not support storage devices, and thus, cannot be used as a destination for backups. For Apple products you would need to use either the AirPort Extreme or Time Capsule for this purpose.

Can't get started with Airport Express; WPA2 problem?

Howdy,
I purchased an airport express about a month ago and am unable to get it set up, at all. My goal is what the setup guide calls "Using AirPort Express on an existing wireless network and stream music to powered speakers" (pg. 15 for those who have the book). The failure is that Airport Admin Utility doesn't recognize my third party wireless network.
My wireless hub is a linksys wireless-G cable gateway, and has been in use with multiple computers in the current setup for a couple years. It is setup with WPA2 personal, TKIP+AES encryption, and MAC access list enabled. SSID broadcast is currently enabled.
I am running OSX10.4.11 on the computer that I am using to attempt to configure this.
Following the instructions for "Connecting to an Existing Wireless Network" (pg 25), I am attempting to use Airport Utility. But there is no such program on my computer, so I am assuming that Airport Admin Utility is what the book refers to as Airport Utility. Airport Admin Utility presents a "window titled Select Base Station" but lists no base stations. I click "Other", provide the IP address and password, hit OK, and ... nothing happens. After 20 seconds the beachball appears, and after another 20 seconds it says "The airport admin utility was unable to read the configuration of the selected base station".
The IP address I used is the one that I enter into the web browser to access the linksys box (no secret here, 192.168.0.1). The password is the one used to access those settings (e.g., the linksys default is "admin", but I changed it). I know the IP address and password are correct, but I do not know if this is the IP address and password the program is asking for. I don't even know if I am running the correct program!
Thanks for any help,
Bob H

Actually, I have it working now.
What I did after posting my last message was I connected the AE to my wireless hub, via ethernet cable. Then Airport Utility was able to find it, initialize it, and load new firmware into it ("it" being the AE). During initialization stage I told it it would be connecting wirelessly to an existing wireless network, and I gave it the network name, security options and password.
Then I told the wireless hub to allow this device (MAC address = Airport ID), disconnected the ethernet cable, power-cycled the wireless hub, and relaunched Airport Utility. It saw the AE, so I quit that. Then I launched iTunes and selected my AE as the speakers. It told me I needed to enable iTunes Music Sharing in my firewall. After doing that, iTunes is now playing through my external speakers. Exactly what I want.
Now I just need to go set this up on my laptop, with the AE and speakers on the other side of the house where I want 'em.
As a recap, I think I basically had two problems, both related to documentation. First, the program that the Setup Guide tells me to use wasn't in my Tiger applications folder, and I was fooled by a program with a similar name (in the past I have seen such name changes between what the setup guide said I should use and what I really needed to use). Second, it wasn't clear to me that, regardless of how I wanted to configure things for usage, I needed to establish a valid wired connection to the AE to initialize it. I think that could be made clearer in the book.
Thanks for everyone's help.
Bob H

ITunes 7 Can't Access AirTunes with Airport Express

After upgrading to iTunes 7 I can't no longer play music through my Airport Express. It worked fine in iTunes 6. It shows up in the pull-down menu, but I can't select it.
On another machine that already had my APE selected, I now get a message "None of the selected remote speakers could be found on your network. Please configure your network settings and AirTunes configuration..."
Any ideas??

You have to make sure IPv6 is turned on in the Network System Preference panel. System Preferences -> Network -> Airport -> TCP/IP -> Configure IPv6 -> Automatically.

How do I know "Roaming Network" is working with Airport Express and Airport Extreme and should I use extended wireless network for third Express?

Attempting to eliminate a dead spot in Wifi coverage [and implement AirPlay] have one Airport Extreme 802.11n and two Airport Express 802.11n's.
http://support.apple.com/kb/HT4145
The Airport Extreme is of course connected to cable modem and Ethernet switch, and one Airport Express is connected to the Ethernet network. As per instructions for creating a "Roaming Network", Airport Express is set to same SSID, security type, and Password.
Questions:
1. How does the client device know which Airport to connect to? In other words, will it switch to the closer WiFi transmitter automatically? The WiFi reception problem is intermittent in the fringe areas so what I do not want it for it to stick with the more distant Airport Extreme in the basement when the Airport Express which is closer will work better.
2. How can I tell which of the Airports the attached client device is using?
The third Airport Express will be in a third location - I was planning on using it also for expanding coverage but after reading the warnings about performance suffering when purely using WiFi for the expansion in this location ("Wireless Extended Network" without an ethernet connection) I have figured that the single wired Airport Express will be adequate and will use the third Express to do Airplay only.
http://support.apple.com/kb/HT4259
Question: Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
Mitch

1. How does the client device know which Airport to connect to?
The Mac computer will automatically connect to the wireless access point with the strongest signal...which is probably the closest AirPort. An iPhone or iPad may not do this and will tend to stay connected to one AirPort.
2. How can I tell which of the Airports the attached client device is using?
On a Mac, open Macintosh HD > Applications > Utilities > AirPort Utility. Click on one of AirPorts. In the area to the right, locate the AirPort ID and jot that down. Then do the same for your other AirPort.
Move your Mac near one of the AirPorts and log on to the wireless. Hold down the option key on the Mac while you click the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device to which you are connected.
If you are close to the "remote" AirPort, and you see the AIrPort ID of the "main" router when you are testing, then you know that the network is not configured correctly.
Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
There will be a modest 10-15% bandwidth loss with the "extend" setup, assuming that the Express is located where it can receive a strong wireless signal from the AirPort to which it is associated. You can avoid the bandwidth loss if the Express is also connected via Ethernet as part of the roaming configuration.

Configuring the time capsule airport wlan function as "connect to wlan", the time caspule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport Express it worked!

Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
Only the option "connect to wlan" is succesful.
With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
My notebook is a MacBook pro.
Any idea????
Thank a lot in advance!
Kind regards
Ingo

Neverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
Apple - AirPort Extreme - Feedback
If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
The "catch" here is that you must have an Apple router providing the network to be extended.

Can I create a home network withous dsl connection with airport express

can I create a home network without dsl connection with airport express?
So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid connection, which is directly connected to my Mac. Does that make an internal network possible?

You have to set up the Air Port with an internet connection to set up a network. Do you have a modem? If yes you can set up the network.

IPad and iPhone 4 and new 5s drop connection with airport express. This just started recently after working fine for a year. PC does not drop. Wifi signal fine. Help?

Streaming music with airport express and Apple TV to 2 different systems. No problem with Apple TV. iPad and iPhone 4 and new 5s keep dropping their connection to airport express. Airport express connection to wifi appears to be fine. No dropping by windows PC. This just started recently after working fine for a year. Help?

What does any of this have to do with the Apple TV?

Can i use my ipod touch with airport express?

I will be staying in a hotel that only offers hard wire internet connection. Can I use my ipod touch with airport express to have have WiFi? I won't have my computer with me.
Thanks!

Yes, you can. However, you will not be able to administer the AirPort from the iPod Touch. Thus you would need to pre-configure the AirPort Express to work at the particular hotel that you will be staying at. Note: Most hotels now offer Wi-Fi in the rooms and the Express may not be necessary.

IMac losing wiffi connection with airport express when sleeping. I can't wake the iMac with the remote app on the iPhone. What is wrong?

iMac losing wiffi connection with airport express when sleeping. I can't wake the iMac with the remote app on the iPhone. when i open airportconfiguration on the iphone is see that the imac isn't connected anymore. Normaly the airport express wake up the iMac but it doens't. What is wrong?

anyone knows a reason for the item above?

My two iMacs frequently go offline when I have our iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices no problem. Any thoughts on this?

My two iMacs frequently go offline when I have my iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices the offline problem stops. Any thoughts on this?

.....doesn't that seems to suggest the modem?
That is what I have suggested....twice now. From posts above:
My opinion would be that it is likely not the ISP, unless you have complete loss of Internet service for all devices at the same time......it is the Comtrend device....
and
I believe that the problem lies with the modem, and not the ISP signal.
Your ISP will likely have a different opinion, though. Please keep us posted on your progress.

How can i change my old airport express password with mavericks

I just bought a new TV and I am trying to connect to my wi-fi, which runs via an old Airport Express. The TV manufacturer says that I should try changing my password from a WEP to WPA - but it seems that I can't even access my Airport Express because it's not supported by Mavericks. Is there a work-around, or do I need to upgrade my Airport Express? It's running fine otherwise - supports multiple laptops and iPhone.

Hi green jean
Try this > http://www.apple.com/airportextreme/features/printing.html
but also see > http://docs.info.apple.com/article.html?artnum=305293
Dennis

Can I do this with airport express?

Similar Messages

Maybe you are looking for