Can I double the length of a track

I have a backing track loaded and want to lengthen it or just double it. I use the track for practicing guitar and like the track but its short. My version is 10.02. there's no option for 10.

drdlk wrote:
Sorry, but I've looked at and tried everything. I can't get that kind of cursor. Is that from a loop that was made from a track?
the type of region shouldn't matter, any recorded region can be looped.
the only thing i can suggest is to very slowly move the cursor around the topRIght edge, without clicking, and watch for the cursor to change, then click and drag.
out of curiousity, if you hover the mouse over the bottomRight edge, does the cursor change to an arrow?

Similar Messages

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.

How can i change the length of a narration ?

how can i change the length of a narration ?

hotts77
Thanks for the reply.
Still not sure what version of Premiere Elements that you are using. But, the following should apply nonetheless
What you describe is what I have described in my blog post and for which I have discussed all aspects of the issue. There
is no workaround to force the program to give you more than you are getting now without other clips also on the track(s). The
blog post just about says it all.
You might have to weigh the pros and cons of
a. Recording your narrations as .wav files in a free audio editor such as Audacity
Audacity: Free Audio Editor and Recorder
and then importing those into your Premiere Elements project with Premiere Elements' Add Media/Files and Folders/Project Assets from where you drag the narration to the Narration Track.
b. Put any video clips on the Timeline when you are recording your Premiere Elements narrations with its Narration Tool. Then remove these video clips and replace them with the real thing when you are ready to put narration and clips into the project.
Please let me know if you are OK with the details.
Thank you.
ATR

How can I change the pitch of a track?

In Garageband 10.03, how can I change the pitch of a track?
It seems that I somehow mistakenly changed the pitch of a guitar track I had recorded, so that al the notes in the track sound like they're about an octave too high.
I don't know how I did that, and how to make the pitch slider appear so that I can try to lower the pitch.
I saw three Youtube videos that show how to change a track's pitch by using the pitch slider, but none of them explain how to make the pitch slider appear.
The pitch slider is supposed to appear in the lower, left corner of my window, but it doesn't appear in my window. Instead the lower, left corner of my window says things like, Region, Notes, Time Quantize, Strength and Transpose.

There's much to learn in Garageband!
If you want a comprehensive introduction to the new GarageBand, have a look at Edgar Rothermich's book:
Edgar's "GarageBand 10.0 How it Works" explains it very well with many screenshots. You can buy it as iBook from the Book store, as PDF, or as printed book from Amazon, Only, this version of the manual has been written for GarageBand 10.0.1, Some features have changed slightly since then.
http://www.dingdingmusic.com/DingDing/Manuals.html

How can I adjust the length of a note? Please help.

How can I adjust the length (the sustain time) of a note after I have selected the note? Many thanks.

Just drag the right end back and forth (mouse over the end of the note - a ] appears) - by holding down ctrlshiftdragging you can change the subdivision into ticks. In the Midi event editor you can do it numerically - just change the numbers displayed in the length section.

How can I know the length of the image data section of a PSD file

I'm a C++ programmer developing a project to parse PSD files, and it's necessary to know whether there is a length field indicating the length of the image data in image data section of a PSD file, if not, how can I know the length?
Thank you.

Sorry I can't help, maybe there is some information in the SDK?
http://www.adobe.com/devnet/photoshop/sdk.html
Or someone might be able to help in this forum?
http://forums.adobe.com/community/photoshop/photoshop_sdk

Can i adjust the length each slide plays in keynote

can i adjust the length each slide plays in keynote.
im trying to make a keraoke style slideshow with lyrics, and music. can i adjust the length of each slide.

Click on the slide background then change the value in the drop down menu: Inspector > Animate > Transitions > Start Transition > Delay
The inspector is the panel on the right hand side.

How can I shorten the length of my ringback tone?

How can I shorten the length of my ringback tone?

You mean music that the caller hears when they call you? You'll have to contact your carrier. That's a carrier feature, not a function of the phone.

Can you adjust the pitch of a track in the middle of a song in Logic Express?

Can you adjust the pitch of a track in the middle of a song in Logic Express? So have the first 40 bars in C minor and the last 16 in D major for example?
Thanks

Hi,
the question is what you want to achieve by doing so. Obviously, transposing is easy. Split the track into two regions. The first region is original pitch, the second is to be transposed. Select the second region. Enter the desired transposition value in the region inspector. Make sure the checkbox "no transpose" is UNchecked in the track inspector.
HOWEVER: You cannot "transpose" minor key into major key. This is because the intervals of full steps / half steps is different for minor and major. The 3rd and the 6th step is a half step in minor, while it is a full step in major. Therefor you must adjust the MIDI events in the piano roll editor to change minor to major and vice versa.
Fox

Can you adjust the length of time the screen stays lit?

Can you adjust the length of time the screen stays lit?

but you can't lengthen it unfortunately.
Bear in mind, the screen is the largest consumer of power.

I can't change the length of an cross dissolve in iMovie

I can't change the length of a cross dissolve in iMovie 10.0.1
I do the right things but 1.0 second stays 1.0 second
Who has the solution of this problem?

»Pass Through« indicates that Adjustment Layers will affect lower Layers outside the Group and that contained Layers with different Blend Modes will affect Blending with underlying Layers outside the Group accordingly.
If you change it to Normal or any of the other Blend Modes everything contained within the Group will basically act as one flattened Layer and Adjustments only affect the Group’s pixel content.
Could you post a screenshot of the document with the Solid Color Layer’s Color Picker and the Layers Panel visible?

Can I remove the length restriction on YouTube videos? YouTube no longer has this restriction.

Can I remove the length restriction on YouTube videos? YouTube no longer has this restriction.

Welcome to the forum.
As John T. points out, PrE was written when YouTube had restrictions of 10 min., and then they added Extended Subscriptions, and then lifted Duration limits.
The instructions in that thread, to which John T. linked, will tell you how to Share/Publish from PrE, to then manually upload via your YouTube/Google account. I would guess that with PrE 12 (probably due in Oct. 2013?), the direct PrE to YouTube uploading will reflect the YouTube specifications - unless YouTube changes the game, after it is written.
I doubt that there will be an update for PrE, just to reflect changes in YouTube, based on the history of the limited PrE updates. IIRC, PrE 3.0 got an update for Windows Vista, which was released, just after PrE 3.0 was, and the 2 updates for PrE 8, that fixed some pretty major Bugs. I do not recall any other PrE updates.
Good luck,
Hunt

How to I adjust the length of a track?

New to Garage Band. Took a one to one session and I can't stop playing with the program. I created a song through the Magic Garage Band feature which I am trying to match up to a video. My video is about 4 minutes but the track I created is about 1:30. How do I set the length of the track?

If the audio Regions of the Project only go as far as 1:30 you can extend each Region by looping them. This repeats the audio. Hold the cursor at the upper right corner of the Region until it changes to a loop, then drag out as far as you like.

How can I change the length of multiple lines at the same time?

This just seems like it should be a no-brainer, but obviously for me it isn't. I'm trying to change the length of multiple lines, that are at different angles, at the same time, in CS4. Basically, I design the face of dials used for airplane instrument gauges (like RPM, Torque, etc), and they have gradiation marks (lines) located all around, similar what a clock looks like with the hour and minute gradiation marks (lines). Is there a way to select all the lines, that I know are the same length, and change it to a different length, that's accurate to the 1/100th of an inch? It would just be like selecting multiple lines that have all the same stroke, then using the stroke box to change the stroke weight from .025in to .030in.
I've used the transform box to change the 'height' of a line before, but the line has to be at 90 degrees (straight up and down), and that won't work for the lines that are at, say, a 45 degree angle.
I hope i'm explaining this in a way that someone will understand. If not, I can sure try to clarify more, or insert the picture so you could see what i'm talking about.
Thanks for any help you can give!

OK, after fiddling around with everyone's ideas, I think I finally got it. I knew there had to be something with proportions between W and H, but couldn't figure out the math, until Jacob answered with:
"If each line must be strecthed from the inner/outer end, you may select each and use the Transform palette, choosing the right Reference Point, multiplying by the proportion in W or H (1.75/1.5), and Ctrl/Cmd clicking."
Now, I basically did everything above, (but I couldn't figure out what you were talking about with the Ctrl Clicking thing), except after figuring out the right proportion (which ends up being so small you guys would die if I told you the number; the numbers I gave earlier were just an example and much larger than what i'm really working with) I just clicked the little chain next to the W and H boxes to constrain the proportions. I then put the new number (multiplied proportion by whatever was in W) in the W box. The line lengthened perfectly toward the center of the dial, keeping the correct angle!
And Harron-Thanks for the link to Teri's, It is going to help with some things I do, but most of the dials I design don't have equal distances between each gradiation mark, and the blueprints I work off of usually have exactly what distances that the grad. marks are supposed to be. So, after selecting one of my grad marks that is already at it's correct place, I then use the rotate tool and Alt-Clicking the very center of the dial, I can then put in exactly what distance I want the next grad. mark to be at, I hit copy (instead of OK) and there will be a new grad. mark exactly the correct distance from my original. Then if I want to have the 3rd grad. mark I just hit Ctrl-D and it will copy another mark to the next position. I don't know if you necessarily wanted to know all that, but i thought i'd explain why I like doing it that way.
A BIG thanks to everyone! I'm really a AI newbie and am the only one at my company that knows how to use it, so I don't have anyone close to ask stupid questions to. So I appreciate all your help!

How can i select the length of a trace in Ultiboard?

Hello
i got a problem with the length of some traces.
Some special traces need to get the same length.
I used the group edit item to create a grout with the needed nets.
How can i creat the traces now. When i use the item Follow-me it doesn't apply the selected value.
At least i tryed to use the Autoroute function but this just function doesn't work. (Error during autorouter preprocessing. Source: Autorouter Parameter Error)
Is there any smart possibility to handle the problem?
Best regards

Beboni007,
Here is how matched length traces can be completed in Ultiboard.
First you do not necessarily need to setup a part group to do this... (differential pairs would require grouping)
1. Forward annotate your schematic / netlist from Multisim.
2. Determine the absolute minimum routing length from the origin of the net to the destination by routing a starter trace (remove/undo).
3. In Ultiboard, go to the spreadsheet view/ Nets tab and set the 'Topology' of interest to 'Star' for the traces you need matched.
-> This changes the Max Length and Min Length in the Nets tab from N/A to a number allowing you to set the min/max trace length
4. Set the Min Length of the nets to an appropriate value for your application (it will need to be at least the value of your starter trace in step #2)
-> Set the Max Length to the minimum + 50 mils or so (Ultiboard will do a relatively good job at attaining the minimum value but give it some room)
5. Go to the Autorouter/place settings and set the Routing mode to: Gridless (this will give the router flexibility to go off grid and match lengths)
6. Highlight the traces of interest and Autoroute these (Autoroute -> Autoroute Selected Nets).
Some Tips:
a. Do this routing first if possible
b. Restrict routing to a single layer if possible (restrict routing layers -> Routing Layers in the Nets tab)
Here is a simple example in Multisim:
After autorouting in Ultiboard as described:
Hope this helps,
Regards,
Patrick Noonan
National Instruments
Attachments:
Matched Lengths.zip ‏44 KB

Can I double the length of a track

Similar Messages

Maybe you are looking for