Can I download BI Publisher on Oracle 11g xe

Hello,
I am pretty new to BI Publisher, I have tired to install it many times, but have not been able to do so ....
After I start RCU and when checking The Global Prerequisites, I get this MSG...
The database you are connecting is not a supported version.
Enter Database with version equal to or higher than 10.2.0.4.0 in 10g or version equal to or higher than 11.1.0.7.0 in 11g.
Refer to the certification matrix for supported DB versions I did not understand the error message, I already use Oracle 11g XE R2 ( on Windows 7 machine... )
However, If I ignore it and carry on in the installation process, the configuration of the BI Publisher fails....
What does "certification matrix" mean ??? Why am I getting this error message ???
Pls help, I am stuck in the installation process with more than 10 guys .....
Regards,
Fateh

Certification Matrix is a list of compatible combinations of oracle products with platforms and operating systems
and client software, all tested and supported by Oracle.
If not in the list then it means oracle may not guarantee the combination works and thus will not be supported for bug issues.
The certification matrix for BIEE11g can be found here:
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls
But going straight to your question:
You are installing Oracle Fusion Metadata on Oracle DB so the proper place to look for minimum requirements is this place:
http://docs.oracle.com/html/E18558_01/fusion_requirements.htm
In Section 7, "Certified Databases" , actually 7.1 you can read the message you are getting is when you are using RCU 11.1.1.0 with Oracle DB 11.2.0.1
and it is only a warning which is safe to ignore.
Also, adds that This warning will not appear in the version of RCU available in Oracle Fusion Middleware 11g Release 1 (11.1.1.2.0).
regards
Jorge
p.s If this answers your question then please grant the points and close the thread

Similar Messages

  • Where can I download PRO*COBOL for Oracle database 11g ?

    Where can I download PRO*COBOL for Oracle database 11g ? I have downloaded & installed linux.x64_11gR1_database_1013.zip
    It has a procob32 but it gives an ERROR loading shared library libcIntsh.so.11.1 ?
    What should pro*cobol be for my linux 64 bit AMD ? (procob procob32, procob18, procob64)
    Hope somebody can help with this, Thanks, [email protected] www.uvsoftware.ca

    This is not the appropriate forum to post this.
    Kindly post it in the Database General Forum or search in the download section.
    Regards.
    Satyaki De.

  • How Can I install Web Service on Oracle 11g r1?

    How Can I install Web Service on Oracle 11g r1?

    Hi,
    Is necesary install XDB?
    Because i have executed;
    select * from dba_registry
    where COMP_ID = 'XDB'
    Oracle XML Database
    Regards

  • Maximum no of rows that can be downloaded to excel in obiee 11g

    Hi
    Please let me know the Maximum no of rows that can be downloaded to excel in obiee 11g and the respective parameter(s) to change in the instanceconfig etc.
    Thanks

    Hello,
    You can find informations about your request here :http://lamont-consulting.com/index.php/blog/obiee/11g/126-obiee-maxcells
    Bye

  • Can't connect to MySQL from Oracle 11g R1

    Hello Oracle's guru.
    Sorry for my English it's not my native langauge
    Enviroments: Oracle 11g R1, Windows 7, ODBC Driver 5.1.8
    I have a some problem with creation gateway to connection to MySQL, and I hope somebody can help me.
    So,
    1) ODBC name - MYSQLDSN
    2) initMYSQLDSN.ora
    # This is a sample agent init file that contains the HS parameters that are
    # needed for the Database Gateway for ODBC
    # HS init parameters
    HS_FDS_CONNECT_INFO = MYSQLDSN
    HS_FDS_TRACE_LEVEL = 0
    3) listener.ora
    # listener.ora Network Configuration File: E:\app\voxa\product\11.1.0\db_1\network\admin\listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 0.0.0.0)(PORT = 1521))
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    SID_LIST_LISTENER=
    (SID_LIST=
    (SID_DESC=
    (SID_NAME=MYSQLDSN)
    (ORACLE_HOME=E:\app\voxa\product\11.1.0\db_1)
    (PROGRAM=dg4odbc)
    4) tnsnames.ora
    # tnsnames.ora Network Configuration File: E:\app\voxa\product\11.1.0\db_1\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    CXWH =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 0.0.0.0)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = CXWH)
    MYSQLDSN =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 0.0.0.0)(PORT = 1521))
    (CONNECT_DATA =(SID = MYSQLDSN))
    (HS = OK)
    Then I trying to connect to MySQL using sql*plus:
    C:\Windows\system32>sqlplus
    SQL*Plus: Release 11.1.0.6.0 - Production on Ср Июн 1 12:13:39 2011
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    login: system
    pass:
    Connect to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> create public database link MYSQLDSN
    2 connect to DEMO identified by "DEMO" using 'MYSQLDSN';
    Channel was created
    SQL> select * from items@MYSQLDSN;
    select * from items@MYSQLDSN
    Error in line 1:
    ORA-28500: connection with ORACLE with other system return message:
    [MySQL][ODBC 5.1 Driver][mysqld-5.5.12]You have an error in your SQL syntax;
    check the manual that corresponds to your MySQL server version for the right
    syntax to use near
    '"ITEMS_KEY",A1."ITEM_NAME",A1."ITEM_CATEGORY",A1."ITEM_VENDOR",A1."ITEM_SKU",A1
    .' at line 1
    ORA-02063: предшествующий 2 lines из MYSQLDSN
    If I trying create new ODBC mobule via OWB, I had next error:
    [MySQL][ODBC 5.1 Driver][mysqld-5.5.12]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '"DUAL"' at line 1
    ORA-02063: предшествующий 2 lines из OWB_56
    What I do wrong? Please help me

    Hi,
    You can download the 11.1.0.7 patchset from My Oracle Support -
    support.oracle.com
    as patch 6890831.
    Once logged in click on 'Patches and Updates' and enter the patch number as 6890831 and choose whichever platform you are running.
    the readme explains how to apply the patch to an existing 11.1.0.6 install.
    The url you posted is only for complete product installs, but 11.1.0.7 is only a patchset that must be applied to an existing install.
    Regards,
    Mike

  • Can't connect Forms 6i to Oracle 11g on Windows Server 2008 SE

    Hi everyone,
    I have Oracle 10g working pretty well with Forms 6i, but now I have installed Oracle 11g on another server and I'm trying to connect Forms 6i to my other Oracle 11g server, but Forms 6i never gets connected. Is there any trick to make it work? I have check the upper cases and other things related with lower and upper case passwords, but nothinh happens.
    Can anyone please help me?

    Hello;
    Its probably the Oracle client that installs with Forms 6. Try connecting to the database using SQL Plus from a Forms workstation. If it fails I would install a newer client and switch the Oracle Home on all the workstations.
    ( Provided it tests out )
    I would probably try using the Net Configurations Assistant in your Oracle Start Menu group with all combinations I could think of before I added a second client to the mix.
    Of minor interest :
    http://www.dbaportal.eu/?q=node/167
    The Windows version might put the hurt on you. This may or may not help that :
    http://www.araboug.org/ib/index.php?showtopic=49679
    Tough combination.
    Best Regards
    mseberg
    Edited by: mseberg on Jun 20, 2012 3:51 PM
    Later
    Legacy Applications and Oracle 11g
    http://jarneil.wordpress.com/2008/03/26/legacy-applications-and-oracle-11g/
    So I'm sorry to say you are out of options. I also checked the Forms Forum and the few posts there on Forms 6 ( Obsolete in 2004 ) all agree. Forms 6 and Oracle 11 database do not play together.
    I hope at least I saved you some time.
    mseberg
    Edited by: mseberg on Jun 20, 2012 4:36 PM
    Upgrading Oracle Forms 6i to Oracle Forms 11g
    http://docs.oracle.com/cd/E17904_01/doc.1111/e10394.pdf

  • Can not open database control in oracle 11g r2, listener issues

    Hi,
    I installed Oracle 11g r2 database on my laptop for testing. at beginning everything was fine and working. 2 days later i am unable to run oracle database control.. i get page not found!
    I tried all the tricks and read almost 200 pages from oracle documentation, none of this was even close to help!
    (by the way oracle documentation is a fail in my opinion, it really tend to complicate things so much and talk about things not related to what a developer want to read about, its even hard for professional programmer to keep up with this, I started to hate dealing with Oracle before even going deep!!)
    I tried deleting database and creating new database i get the following warning:
    - Enterprise manager configuration failed due to the following error:
    listener is not up or database service is not registered with it. start listener and register database service.. etc.
    Some how after few hours the control is working but the database is not there, and it shows that the listener is up, but database is down.
    I tried creating a new database, but i get the error above (it seems its created but not linked to listener!!)
    I guess what triggered this error is running xampp, i was also working in php project and ran xampp for test, since then oracle is corrupted!
    any help would be appreciated (please don't send me links to oracle documentation because its useless and not straight to the point)
    Regards

    Hi
    thank you for the reply
    I assume i should do this through SQL plus?
    anyway, now am getting new error: ORA-00020: maximum number of processes (150) exceeded
    I get this error when trying to login to SQL plus, or create/configure database.
    I tried deleting oracle 11g via universal installer i get message saying run the command c:\...dbhome_1\deinstall\deinstall
    I don't understand Oracle totally collapsed in my laptop with no reason

  • Can I download MS publisher to my Mac Book Pro?

    I have a disc with microsoft publisher but the macbook pro won't read it.

    You can't.
    Microsoft Publisher works only on Windows PCs.
    You can install Windows using Boot Camp (already on your disk) or via Apps like Parallels. If you consider doing so, you need a Windows CD with serial number.
    In my humble opinion: don't do it, it's pain in the a..!

  • Can't Download PDF and ZIP Oracle Documentation

    Hi!
    I love you all at OTN. You are doing a great job,
    enlightening us about Oracle technologies. Well done.
    I experienced a problem while trying to download the
    Oracle documentation files in pdf format. All the
    download management software I tried to use kept
    reporting that the server 'profile.oracle.com' reports
    that the pdf files are text/html content type. And so
    all the downloads where aborted. Only Internet
    explorer can be used to download these pdf files and
    IE is very slow and you can't resume the download if
    the connection breaks.
    Please kindly help me and others who may be
    experiencing a similar problem.
    Thanks and stay blessed
    Olakunle Kolade

    Hi !, you must try it with netscape, the best navigator of the world worldly...
    Regards.

  • Do I can store only 25 MB on  oracle 11g xe?

    Hello
    I downloaded oracle xe for my job , do we can store only 25 MB as I show ?
    and does oracle xe enough and no need to SE ?
    thanks

    Hi user,
    If you run small business it is enough.
    Any use of the Oracle Database Express Edition is subject to the following limitations; 1. Express Edition is limited to a single instance on any server; 2. Express Edition may be installed on a multiple CPU server, but may only be executed on one processor in any server; 3. Express Edition may only be used to support up to 11 GB of user data (not including Express Edition system data); 4. Express Edition may use up to 1 GB RAM of available memory.
    Pls, check :
    http://docs.oracle.com/cd/E17781_01/license.112/e18068/toc.htm

  • Where can I download the Dirver for Oracle Version on UNIX DG/UX

    Hi,
    Our Oracle DBMS and other application are running on DG/UX Unix OS. Can someone tell me where to download the right JDBC version
    for it.
    Thank you
    BinhMinh

    You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • Where can I download odmapi.jar  for Oracle 10g Release 2 (10.2.0.1)

    Hi,
    I've just installed 10g DB Release 2 (for Linux) and now I want to explore the Decision Trees feature of Data Mining (as in the presentation of Robert A. Habertroh in OTN). However when I use Data Miner connect to this new DB, it said "Cannot connect to ODM server". There is no directory odm under my $ORACLE_HOME.
    BTW: I download the from odmapi.jar http://www.oracle.com/technology/products/bi/odm/odminer.html, but now it said there is odmapi.jar for 10.1.0.4.0 only. If I use this Data Miner to 10gR1 is OK.

    Hi,
    I've just installed 10g DB Release 2 (for Linux)
    and now I want to explore the Decision Trees feature
    of Data Mining (as in the presentation of Robert A.
    Habertroh in OTN). However when I use Data Miner
    connect to this new DB, it said "Cannot connect to
    ODM server". There is no directory odm under my
    $ORACLE_HOME.
    BTW: I download the from odmapi.jar
    http://www.oracle.com/technology/products/bi/odm/odmi
    ner.html, but now it said there is odmapi.jar for
    10.1.0.4.0 only. If I use this Data Miner to 10gR1 is
    OK.Hi Mark,
    Thanks for the promptly reply.
    I want to test the new features of ODM 10.2 as a "proof-of-concept" project. So could you inform when this will be available in OTN ?
    Thx

  • Where can I download Oracle Enterprise Repository 10g

    Hi,
    Where can I download Oracle Enterprise Repository that will work with SOA Suite 10g? I can see only the 11g version is available.
    Thanks.
    Edward

    i just want to use oracle enterprise manager for 11g
    where can i download it compatible for oracle linux enterprise 5.4You can download it from these links:
    Oracle Enterprise Manager Downloads
    http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html
    Oracle e-Delivery Website
    http://edelivery.oracle.com
    Thanks,
    Hussein

  • Can not download Oracle 8.0.5 for Linux

    Hi,
    When I try to download the 8.0.5 version of Oracle Database (http://download.oracle.com/otn/linux/805ship_tar.gz) I get the error:
    Not Found
    The requested URL /otn/linux/805ship_tar.gz was not found on this server.
    Where can I download this version of Oracle Server?
    Regards,
    A/S Alejandro Rossi Zen
    DIVISION INFORMATICA
    PODER JUDICIAL
    MONTEVIDEO - URUGUAY

    I think 8.0.5 is not available for download any more. Looks like you will have to go for 8i or 9i.

  • Downloading oracle 11g using .torrent file

    hello,
    can anybody tell me where i can get the .torrent file for oracle 11g database full version ?
    with thanks in advance,
    thomas k

    Try
    http://www.torrentz.com/abfb0ad4d9a4310bae1ba766f65878d0ab0514ed
    http://thepiratebay.org/torrent/4768896/Oracle_11g_Release_1_Full_Version
    Regards,
    Satishbabu Gunukula
    http://oracleracexpert.blogspot.com
    [Click here to learn Transportable tablespace export/import|http://oracleracexpert.blogspot.com/2009/08/transportable-tablespace-export-import.html]

Maybe you are looking for