Can I download onto a usb flash drive instead of a IPod

Can I download onto a usb flash drive instead of a ipod?

Yes, but it does not work the same way.  Insert the USB flash drive into the computer and open it so it looks like a folder.  In iTunes, highlight the songs you want, and drag them over to the folder.
If you usually run iTunes in full screen mode, make it smaller so you can do the drag.

Similar Messages

  • How to back up an iPad file onto a USB flash Drive?

    HHow do I back up a file from my IPad onto a USB flash drive?

    There is zero support for a plug in flash drive. You have to use one of the wireless ones as noted above.

  • In start disc mode can I use a external USB flash drive on MAC Book Pro

    In start disc mode can I use a external USB flash drive on MAC Book Pro?

    To do what? Yes you can connect a USB flash drive to the system and if it has the Recovery HD files on it you can boot from it. If it has the OS X install files on it you can boot from it. If it is large enough to contain a Time Machine backup on it you can restore your system from it.
    So what do you want to do with the USB thumb drive?
    Roy02649 wrote:
    In start disc mode can I use a external USB flash drive on MAC Book Pro?

  • TS1717 can i download  itunes to a flash  drive and install the program on another computer?

    can i download  itunes to a flash  drive and install the program on another computer?

    erinjb1981 wrote:
    do you know how to install it w/out administrator access? is that even possible?
    Only if the computer was set up to allow installs without admin privileges.

  • Can't open folders in usb flash drive

    hello, i'm a new chromebook user, serial #XXXXXXXXX . i have a serious problem using an external usb flash drive. the files i have there are all in folders, and when i connect the drive the computer simply refuses to open them! i click and double click and nothing, and without accessing the folders i obviously can't open my files.
    help please!
    [Moderator edit to remove serial number.]

    If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
    - Peter

  • Can't boot from a USB flash drive

    I believe this ability was lost after updating to BIOS 80.52 following HP's "strong recommendation".No warning was given that this update would remove this ability and see that "Due to security changes, after this BIOS update is installed, previous versions cannot be reinstalled."
    I have tried disabling Secure Boot and enabling Legacy Boot, and tried re-applying BIOS defaults.
    Is there a particular combination of BIOS settings that I haven't been able to find?As the warranty on my computer expired in July 2014, the HP Customer Support Contact page won't even accept my request for assistance - despite the "strongly recommended" BIOS update being made available *after* this date. I require the ability to boot from USB flash drives ... how can this now be achieved?
    Is there an HP BIOS for a more recent HP product with the JasmineR motherboard (or an AMI or other BIOS) available and how could I install it?
    Boot a BIOS flashing program from CD or DVD and somehow bypass the HP BIOS's block on updates? Thanks in advance for any advice

    Hi, thanks for the quick reply. I don't have another PC handy but will try to find one. The USB flash drive definitely does NOT appear in the boot menu - even as an HDD or CD/DVD as I have seen mentioned elsewhere as a possibility - and all USB devices are enabled in the BIOS settings and USB HDD and USB Floppy/CD are above rEFInd and all other entries in the boot order. I should also have mentioned that I've tried a (Lexar) USB flash drive prepared approximately a year ago with GParted Live which *has* previously booted the machine, and also different models of flash drives (Toshiba, Transcend) and different methods of preparing them such as burning bootable ISO images with Win32DiskImager, Universal USB Installer and Rufus, and manually creating and formatting a bootable FAT32 partition with diskpart (as per https://technet.microsoft.com/en-us/library/jj200124.aspx) and copying in System Rescue CD/GParted/Clonezilla files, ensuring there is an /EFI/BOOT/BOOTX64.efi file. In diskpart, the "attributes disk" command shows that the USB drives are not marked as bootable and "help attributes disk" says READONLY is currently the only disk flag that may be changed. (Don't know if this means anything as the GParted disk isn't "bootable" but did boot) Did the BIOS update disable enumerating USB devices until later in the Windows 8.1 boot process? 

  • NB100 - How can I reinstall OS from USB flash drive

    My TOSHIBA NB 100 notebook does not have CD-DVD drive.
    OS is Windows XP Home SP2.
    OS is not booting.
    Notebook won't start at all so I cannot run any sort of test when i turn it on.
    The we apologize screen come on it says run safe mode, safe mode networking, safe mode comand prompt or start windows normally. But no matter which I chose it won't start it only goes to Windows and seems like its starting but then shows the blue Windows screen & stays there.
    So I want to reload Windows from my USB flash drive.
    The BIOS boot sequence is HDD - FDD - FD - CD - USB Memory.
    What are the steps for loading Windows from USB flash drive?
    If this does not work then I want to connect another laptop with Windows CD in its CD-DVD drive to the Notebook.
    Will this work? Will the Notebook use the Windows CD in the laptop drive to load the OS?
    How to do this connection?

    Hi
    Usually you would need an external USB CD/DVD drive in order to boot from the Windows XP disk or Toshiba recovery disk.
    But there is a method which allows you to install the Win XP using 2GB USB flash drive.
    This is possible because the BIOS of NB100 support the booting from USB memory stick.
    Pease check this internet page:
    +Installing Windows XP Using A USB Flash Drive+
    http://www.pctipsbox.com/installing-windows-xp-using-a-usb-flash-drive/
    Hope it could be helpful.

  • The alias can't be opened because the original item can't be found - After USB Flash Drive transfer

    I've seen a couple of threads about this message, but none dealing with my simple issue:
    I get this message: "The alias can't be opened because the original item can't be found" -- AFTER TRANSFERRING THE FILE IN QUESTION VIA FLASH DRIVE.
    I thought, maybe the "original item" hadn't been completely copied from the drive, so I tried opening the file again this time with the drive still plugged into the laptop--but again, the message came up and I couldn't open it.
    What's the deal?
    The files I'm transferring:
    a 1.2GB MKV file of a movie I downloaded, which I had no trouble viewing on my desktop
    a 105MB application
    (btw, the application is called "VLC", which is a file playing app that works on my desktop, and I want it on my laptop so that I can play movie files like .mkv, which is the other file I'm transferring...but that doesn't make any difference, I think. No, I can't just download the movie and the app right onto the laptop...I don't have wifi right now...='[...)

    I had been dragging straight from the desktop into the USB window. Eventually, I opened up finder and went to Desktop there, and when I dragged the files from there into the USB window, it worked. Now it took a while to move the files into the USB, which was a sign that they were actually being moved.

  • How can I boot PC by USB Flash Drive or USB 2.0 Storage Drive ?

    HI
    anyone know ? help me please !

    If you choose USB-FDD and select the USB hard disk in the Boot Priority list, the BIOS will try to boot from that device. For giggles, I stuck a working boot disk (NTFS) into a USB enclosure and tried to boot from it but it didn't work (continuous resets), I don't know what the boot sector requirements are.

  • How To Transfer music files from a usb flash drive onto my thrive

    I have some music taken from my pc onto a usb flash drive.  I can play it on the thrive but want to permanently transfer it onto the thrive so I can play it without using the usb  flash drive.
    Cananyone help me?
    Thanks

    One way that I did it was to download a movie onto my laptop. Once I did that, I copied it onto an SD card. Inserted the card into my Thrive and dowloaded it from there. Or as others have mentioned, keep the movie on the SD card so that you'll have more memory on your Thrive. I went on YouTube to see how to copy from the SD to the Thrive. It's pretty easy. 

  • Full featured bootable Mac OS 10.7.5 on USB flash drive?

    Is it possible to get a full featured bootable 10.7.5 onto a USB flash drive?  I'm can only seem to get it working with the OS installer, disk utility, Safari, and limited access to other features.

    Did you prep the flash drive first?
    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Now, run the installer application. Click on the Install button. Click on the option to select another disk. Select the flash drive as the target and click on the Install button.

  • My compaq cq62-214nr will not boot from a usb flash drive

    I have a Compaq CQ62-214 NR Notebook. When I enter the bios boot options screen with F9 there is a blank space where Boot from USB/Flash Drive should be. If I enter the bios setup and move usb flash drive up to the first option above Notebook hardrive and Internal CD/DVD Rom ,save the changes to the BIOS then Reboot. Enter the boot options screen again the blank line moves up to the first choice slot but still is blank. If I press enter over that black option the computer does not boot from the OS I have install on the usb flash drive it just starts its normal windows boot screen. YES I have upgraded the BIOS to the lates version F.37
    Can somone tell me what is wrong.

    Try booting into the one time boot menu.
    Step 1: As soon as you turn on the computer on the hp invent screen keep tapping F9 key.
    Step 2: you will get boot otions such as hard drive, optical drive, USb drive
    Step 3: You can hit enter on the usb flash drive. Should boot from the os on your flash drive
    *Although I am an HP employee, I am speaking for myself and not for HP.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • How do I copy some photos from iPhoto on my Macbook to a usb flash drive?

    Hi - I want to copy some photo's in iPhoto onto a usb flash drive.  How do I do this?
    Thank you

    Insert your usb flash drive.
    In iPhoto select the photos you want to write to the flash drive and use the command "File > Export".
    In the "Export" panel set the quality and size you want for the exported images. Then click the "Export" button and in the File Chooser dialouge select your flash drive as the destination.
    -- Léonie

  • Usb flash drive read only problem [solved]

    Hi, im using spacefm, i have udevil and udisks2 installed, i can read my USB flash drive but i cannot delete files, i tried gparted that use spacefm as well and i can delete files from the usb flash drive with no problems, any ideas?
    i solved i installed ntfs-3g and i can delete files again
    thanks
    Last edited by adcdam (2013-04-08 01:01:22)

    I installed it and got this error : now my Macbook wont even see the flash drive...

  • Booting from a USB Flash Drive and Optimizing Performance

    I know that you can boot Leopard from a USB flash drive, and I have a 16GB flash drive I'm using as a bootup disk on this 2006 MacBook I have that has a broken hard drive (it was recalled, but the recall ended in 2010).
    The problem is that it's very slow. I have about 8GB of free space on it, so it can't be the VRAM being too small. The USB speed just stinks. There must be ways to optimize the OS to run off of a slow drive by accessing data as infrequently as possible. What can I do to speed this up? Should I disable hard disk sleeping? Should I use some kind of Mac tuneup/optimization tool's feature?
    I plan to get an internal hard drive for it, but I'm stuck with this for a while.

    Not all USB2 Flash drives are equal, in fact I bought 2 16 GB USB drives for cheap, as along side of them were even the same brand 16 GB Flash Drives just a different model, for 5 times as much!
    Me was thinking how bad could they be? Well, they could be 5 times worse than other USB2 flash drives... LOL on me!
    They under extremely rare occasions will Read or Write at 5 MB/s, & very often 1 MB/s...
    My Buffalo Flash drives do near USB2's top speed, see some diffs...
    http://usbspeed.nirsoft.net/
    Optimizing yours will give little benefit.
    You could also do a USB2 RAID0 setup if you have enough ports.

Maybe you are looking for

  • Flash Update Service Crashing

    I get the following frequently... Adobe® Flash® Player Update Service 11.3 r300 has encountered a problem and needs to close.  We are sorry for the inconvenience Error Signature szAppName : FlashPlayerUpdateService.exe     szAppVer : 11.3.300.265    

  • Apple Mobile Device Problems

    Hi guys.  I just need help on figuring this out.  My iPod was fine before but now its saying that the Apple Mobile Device is not working.  I looked up how to fix it and did what it said except I can't change it from disabled.  Please help and thank y

  • I am looking for an AP that can perform the routing as well which model should i go for

                       HI, while setting up the wireless network for best networking institute in bangalore, networkers Zone (http://networkerszone.com/), i found that we require a router for static routing and an AP so i was wondering if i can get one d

  • When I put images from my digital camera to iphoto they register as jpegs with only 72 dpi. How can I get them to be 300dpi?

    I have a mac osx 10.6.8. iphoto 11 version 9.2.3. My camera is a Canon Power Shot SX700HS. I want to send high res. photos to a company who require 700dpi. When I attach my camera to my mac they turn into jpgs and then when I try to send them by emai

  • JDBC Servlet Problem

    Hi, I am trying to write a servlet to do a simple query against a database, however I am getting an "ERROR 405 - Resource not allowed". I am getting nothing appearing in my webservers or the jdbc log, so I don't have a stack trace to show you all. An