Can I download Snow leopard/Lion rather than order hard copy delivery? Not finding in iTunes nor on apple website..
I currently have Mac OSx and looking to upgrade to Lion (sounds like I need to go through Snow Leopard upgrade first). Is there an easy way to simply download these upgrades rather than order via the mail? Any way to avoid updgrading two separate times and have the ability to go direct to the Lion upgrade?
Thanks!
You cannot download Snow Leopard. You have to buy it on disk.
Once you've installed that, and updated it to 10.6.8, you can download Lion from the App Store.
Apple also sells Lion on a USB stick, but I don't know if it is possible to install that on a disk with just Leopard.
Also, make sure your MacBook can run Lion: http://www.apple.com/macosx/specs.html
Similar Messages
-
Why can a person buy and/or download Snow Leopard, Lion, and Mountain Lion but not Mavericks???
I am running OS X Lion on a mid 2009 MacBook Pro with 4GB of ram and a 160GB HDD. I was going to download Mavericks from the app store but waited to long. Now that Yosemite is out Mavericks has disappeared from the app store. WHY? A person can buy and/or download Snow Leopard, Lion, and Mountain Lion but not Mavericks??? And the kicker is that it was FREE!!! I just wanted to load Mavericks on my MacBook Pro to see how it performs. If I could live with any slow downs or quirks, I'd leave it installed. If not, I'd roll my system back. Apple's policy of ramrodding unstable product down our throat is BS. I don't want to use Yosemite until it has become more stable!
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless. -
I have Mac OS X 10.5.8 can I download Snow Leopard
I have the 2008 version Mac OS X 10.5.8, will I be able to dowload Lion
Hi
No. Read this:
http://www.apple.com/macosx/how-to-buy/
It will tell you what you need. You can't download Snow Leopard. You'll have to purchase it. See here:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA&mco=MTc1ODgwMjE
HTH?
Tony -
I have an old mac version 10.5.8 I need to update to snow leopard and my disc drive isn't working... Can I download snow leopard without a disc?
Snow Leopard is only available on disk. Furthermore, even if you had a working disk drive, you may not be able to install Snow Leopard anyway, depending on just how "old" your Mac is. It must have an Intel processor to run Snow Leopard (Macs with Intel processors were first made in 2006), among other requirements.
-
I have a MacBook Pro I recently purchased 'cause my old G4 just couldn't output my video films properly. My new MacBook Pro is running 10.7.5 OS Lion. Don't like iMovie 11 and want to use iMovie 6. It won't download on Lion. Could I download Snow Leopard (deleting OS 10.7.5) and use iMovie 6 then? I saw a previous thread that said that could be done.
AppleMan...I have the same iMac you have...i-7 16GB with a SSD....just bought it second hand and it is about 1.5 years old....it was maxed out with upgrades when the original owner bought it. It was also restored back to factory settings prior to me taking possession.
I am making home movies in iMovie 11....max length 30 minutes or less. I am totally new to this editing. I am using HD footgage filmed from my Hero GoPro 3. I am finding that the movies that I am creating are skipping, staggering, hanging up etc...usually where I had transitions. I am certain I have enough power and memory in my iMac, so what's the issue? I read one of your other posts about optimizing each event or clip to 1080p? Is this what I need to do for every clip I import? Can I do this for all the clips at once on import? I also read that I may need to export the movie to quick time for smooth playback??
Any help you can provide would be appreciated!
Sincerely,
Matt
PS=How do I e mail you directly here in the posts? I went to your profile but didn't see any "e mail" or "contact" member button to click on. -
Can I fool the Mac App Store into thinking my mini runs Snow Leopard Client rather than server?
I've googled this to death and can't find an answer because, well, Google ain't all its cracked up to be.
I highly object to Apple forcing you to pay for both Lion Client & Server if you have a server model Mac. Especially seeing as Lion Server software is just an app that sits on top of standard Lion, and that you can remove/disable it anyway. I bought a Mini from a chap in Hong Kong purely because it was way more powerful for the price than any Mini's available running a client OS here in the UK. I have no intention of learning to use the server side products, its not an interest and never will be. Plus some of the ways in which OS X 10.6 server operates gets on my nerves because of the control the server has over certain functions.
I'm happy to go through the process of a fresh install of retail Snow Leopard firest IF I really have to as it's cheaper than Lion & Lion Server, but ultimately it's just £26 spent for the sake of it. I was wondering if anyone knows of a system file that can be tweaked so when the App Store checks my OS version, it doesn't see server, only standard Snow Leopard?
Having read the online instructionals on how to move and save the download files and then perform a fresh install from a boot device (as the upgrade under the above circumstances would likely wreck the system) I'm living in hope I don't need to go through retail Snow Leopard first.
Thanks all!Probably the best idea although do read their Terms Of Use first. Do realize that anybody here who answers your question is in contravention of the YOU as much as you would be for posing the question.
But good luck
Pete -
How can I download to the desktop rather than preview, preview is a nuisance
How can I download items to my desktop rather than "preview"? Preview is a nuisance.
You can set up a default download location through your browser(s) Preferences.
If you do not want Preview to open the files, do the following:
Highlight your file>File>Get Info>
In the Get Info window, scroll down to "Open with:"
Select the application you want to open the file with.
Click the "Change All..." button if you want to "Use this application to open all documents like this.”
==========================
Short cut:
Control mouse click (right mouse click if available), Open With...-> Other
Pick Preview on a PDF document, and make sure to check Always Open With before hitting Open.
Thanks to a brody for the above short cut. -
tried software update but no cigar.. help!
Hi,
Snow Leopard is not a download. It only comes on Disk to Install.
It would bring you iChat 5
Only iChat 5 will work in Snow Leopard.
Check if you have tow Versions of iChat.
It should be in the Applications Folder but will get missed in the Upgrade process if it is in a sub folder (which in turn the DOCK icon may be linked to)
11:03 PM Monday; December 19, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I can't install Snow Leopard on a brand new hard drive with a brand new optical drive.
I need help please. I have a 2009 MacBook Pro. The hard drive crashed a while back so I bought a new one. The original Snow Leopard disc that came with it was scratched so I bought a new one of it as well. After trying/failing to install Snow Leopard on the new hard drive about a dozen times I bought a new optical drive as well. I installed the new optical drive today, tried to install Snow Leopard again and STILL got the same installation error messages. Any help that anyone might be able to provide would be greatly appreciated.
Last error message:
Install failed: The Installer could not copy the necessary support files.Did you partition and format the new drive first?
Drive Partition and Format
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. Upon completion quit Disk Utility and return to the installer. Complete the Snow Leopard installation. -
Can you download OSX Mountain Lion more than once on your computers after paying the $19.99
If I purchase mountain lion on my itunes/app store account, can I use that same account on my other mac to download mountain lion without paying another $19.99? I am currently waiting for my email for a free copy but If i can do multiple downlaods without paying extra, I would rather purchase it so I can download mountain lion on my ineligible computer and my newer one too
yes, you can install ML on all the macs you own as long as you use the same Mac App Store ID singing into each of them.
-
Can I download snow leopard instead of buying the disks....then afterwards I would upgrade to lion.
Peter Kjaer wrote:
Can I download snow leopard instead of buying the disks....
No.
You need to Purchase Snow Leopard on Disc. And Install it...
Mac OS X 10.6 Snow Leopard
Peter Kjaer wrote:
...then afterwards I would upgrade to lion.
And then Purchase and Install Lion...
http://www.apple.com/macosx/how-to-buy/ -
I have 10.5.8 and want to upgrade, Do I have to download Snow Leopard before download the Mountain Lion?
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
Can't install snow leopard on partition after upgrading to lion
I rushed out too early to install Lion via Apple Apps store. Now, I realize that Rosetta is gone and so are my options to use older apps. As I was reading on the web and Apple Support, I have tried various things and get a window saying that I can't install snow leopard.
I have never partition my hard drive, but using disk utility I created a partition called "Snow Leopard." It divided my HD in half which is okay. I closed the disk utility window, rebooted holding down the "C" key, and saw the OS X Install DVD. When I select it a window pops up saying, "You can't use this version of the appl inst Mac OS X with this version of Mac OS X. You have installed Mac OS X 23.1.1."
Before downloading lion, I made a backup of my existing HD using Time Machine to an external HD. When I open up a saved version dated a month ago, I see that the applications that were working in snow leopard now have the icon circle saying that it is not supported by lion. This is strange since I used Time Machine to back up my HD, then turned off the app before downloading lion. Even older versions saved on the external HD show the circle.
I read about lion and the "Recovery HD," but when I hold down the Command-R key nothing happens when I restart my computer. It also talks about using the option key but that does not work. It talks about reinstalling lion using this system, but I don't see it working.
How can I install snow leopard on my new partition, then I would go to "Software Updates," to get the latest version, or use one of the versions on my external HD to have both operating system.
Thanks,
DaisyMayHi Scottiemn,
As I was trying different things to make a partition on my HD, I made notes as to what I did, and I finally got it to work. I will try to explain what I did.
Before installing “Lion,” I backed up Snow Leopard using Time Machine to my external Seagate HD. I installed “Lion,” and found out that I could not use some of my old apps, so I did the following.
Since I am running “Lion,” I opened up disk utility and selected my MacHD (1TB), then I selected partition, and it showed “Macintosh HD” under the partition information name. I believe I selected the plus, + and it divided my HD space in half, and I named it Snow Leopard.
I then installed the Snow Leopard DVD, and restarted my computer holding down the “C” key, I held it down for about 30 seconds or more and then took my finger off of the key. As I waited I finally saw that I was on the install DVD, and on the top menu bar I saw “Utilities.” I had my external Seagate HD mounted on my desk top before I restarted my computer, I selected the “Utilities,” on the menu bar and it gave me the option to back up from Time Machine, I selected my external Seagate HD to the newly created partition I named Snow Leopard and I said “Yes.” I followed the instructions and after it was done, I went to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with Snow Leopard. On my desktop, I can see two Hard Drives, one is Macintosh HD with “Lion,” and the other is Snow Leopard.
Then, I started up my computer and I was on the Snow Leopard partition and I saw all of my apps working. I then went back to the menu bar and selected System Preferences, System, Startup Disk, and selected to start up with “Lion,” and restarted my computer and I was running “Lion.”
I am not sure why I was not able to use the DVD of SL before, but somehow I got it to work, and I hope that I have explained what I did above.
One thing, when I installed “Lion,” from the app store, I did not make a bootable DVD of the application. I went back to the app store and downloaded “Lion” again and kept it in the dock until I got Snow Leopard to work. I burned a DVD of “Lion,” and so I have a backup of it.
Since my Seagate HD has only 250 GB of space and it is an EIDE HD 7,200 rpm using an OWC Mercury Elite FW400/USB2 with the Oxford chipset 911 enclosure which I bought in 2008, I decided that since I now have my 27 inch iMac quad core i5 with 1TB that I needed a larger hard drive.
I researched the web and decided to go back to OWC and just bought a 2.0TB OWC Mercury Elite Pro “Quad Interface” 64MB with eSATA/FW800/FW400/USB2.0 with 7,200 rpm speed for $219.00. I partitioned it for Time Machine, and Carbon Copy Cloner.
I ran Time Machine, and both partitions “Lion, and Snow Leopard” are on the Time Machine partition and both HD’s are under the Carbon Copy Cloner.
I am self taught on my many iMac’s over the years, and I go to the forums to ask questions and follow the helpful hints to resolve my problems. I carefully try different things and write down what I did so I don’t repeat things.
I hope that I have explained what I did, and hopefully it will work for you.
When I want to run SL, I select in the System Preferences to start up from that disk, when I want to run Lion, I go back and select that and start up my computer running Lion.
Since I have many old apps that Rosetta uses to open them up in SL I wanted to keep that operating system. I will go back now that I have everything working and see if I really need them. I won’t rush to remove my SL partition that I created, but in time if I don’t need the older apps then I may clean out my system and just run Lion.
I run Lion now all of the time, but when I need to go back to SL, I now have the option.
Good Luck,
DaisyMay -
I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?
The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
You can upgrade direct from 10.6.8 to 10.8 Mountain Lion without going through 10.7 Lion with the Late 2008 model 5,1 Aluminum Unibody. The Model 5,1 will probably run 10.9 Mavricks when it comes out.
10.8 Mountain Lion is a download from the App Store, the price is $19.99.
Mountain Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.8 http://roaringapps.com/apps:table
Also Mountain Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mountain Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications. -
Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?
thanksYes. You should be fine with Snow Leopard, but Lion requires a minimum of 2 GBs of RAM. If you upgrade to Lion I would first upgrade your RAM to at least 4 GBs if your model supports it. Also, see:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).
Maybe you are looking for
-
Hi, I'm facing one issue during the creation of return sales orders. I'm creating the Sales order with reference to invoice(Billing Doc). There are multiple materials with multiple batches. I'm choosing one material with 2 batch (say line item 1 &
-
I am trying to instal the latest version of iTunes onto my MacBook Pro, but my computer has been "configuring" the installation since 5pm yesterday and now it is 10:30am. It has never done this before. Can anybody help me out?
-
An Active Directory Domain Controller could not be contacted
Hi, I encountered this error while trying to change windows 8 & 7 from workgroup to a domain. i've tried all i think i know but just to no avail. i will be very glad if anyone in this forum can help me provide a solution to this issue. NOTE: i have
-
Itunes store won't open because network timed out
HP Pavilion Windows 7 64-bit. Itunes won't log in and won't go to itunes store, because the network has timed out. I checked the firewall and allowed itunes, and did the "flushdns". What do I do?
-
Clicking on a link no longer opens a new tab with Firefox 17.0.1 update of today
New tab on clicking link opened earlier today but not since Firefox updated itself to 17.0.1. When I click on a link, the page just jumps, but the new tab doesn't open. It will open if I right click the link, which I shouldn't have to do. How can I (