Can I duplicate lights created in PS 14 Render/Lighting Effects?

I've been going absolutely nuts trying to simulate a LED (RGB) stage lighting chase using a tight grouping of RGB spot lights repeated 30-40 times. I realize I have to set-up the group of 3 (RGB) spot lights, but the ability to copy and paste these groupings seems to be lacking in PS 14. If it does exist, it sure as heck isn't very intuitive. I certainly don't have the copious hours it would require to set up 120 individual spot lights. Good Lord!

Anyone have an idea about this? In the old lighting effects, you could Option-drag (Mac) a light source to clone it, but that doesn't seem to work in CC.
If I'm trying to create a night version of a building with multiple gooseneck lamps, it's difficult to get several lights to all look the same if I can't clone the first one created.

Similar Messages

Can't access Filter-Render-Lighting Effects

I have an image in Bridge that exists both as a jpg and camera raw. I can open the jpg version and apply Filter - Render - Lighting Effects. When I try to do the same with the camera raw image, I get as far as Render, and then the Lighting Effects options is gray and not accessible (along with Clouds and Difference Clouds). Why is this? Surely it should be possible to use the Lighting Effects feature with a raw image?
I am using CS2.

Glad to get you up to speed again, on only took a few min. to get answer. Your lucky day!

How can I duplicate a light source in the Render Lighting Effects Filter?

hello --
when using the filter Render > Lighting Effects, is it possible to duplicate a lightsource? My goal would be to have a light source of the exact same dimensions just offset on the canvas? any suggestions or tips much appreciated.
thank you in advance,
patrick.

Anyone have an idea about this? In the old lighting effects, you could Option-drag (Mac) a light source to clone it, but that doesn't seem to work in CC.
If I'm trying to create a night version of a building with multiple gooseneck lamps, it's difficult to get several lights to all look the same if I can't clone the first one created.

Can I duplicate the design and layout of an old form to create a new form?

Can I duplicate the design and layout of an old form to create a new form?

Hi;
You sure can.
From the "My Forms" tab with the form selected there is a "Duplicate" button on the toolbar along the top, there is also "Duplicate" in the right click context menu on a form:
Also, you can export a "Design file" (basically a template) of any form locally that can be implorted into your or anyone elses account. With the form open click "File" - "Export design File". This will save a design file to your computer which you can use to "Import Design file".
Thanks,
Josh

I am new to pages and want to know how to link elements together to create one unified element that I can then duplicate several times on the same page?

I am new to pages and want to know how to link elements together to create one unified element that I can then duplicate several times on the same page?

I think you are talking about grouping objects.
1. They must all be floating objects
2. Command click on each in turn
Menu > Arrange > Group
Peter

Can't reply or create new e-mail at all. Can if I go to photos & forward 1

Very odd behavior that started when I upgraded to the new iOS 4.
When I'm in the mail app and I touch the "create new mail" icon, it lights up but nothing happens. No new, blank e-mail message appears. Also, when I am reading an e-mail, if I hit the "reply" icon, I get the options for reply, reply-all & forward, but after pressing them, nothing happens. I just return to the message.
If I go to my photo library and forward an image that way, a new e-mail does pop up and I can send that way.
I have 3 different accounts on the iPhone and have for years. MobileMe, Hotmail and an Exchange account. They can all recieve mail and I can manipulate it (move it to folders, delete it, etc), but I don't get the pleasure of responding.
Obviously this is a huge issue. I had to replace my iPhone for a hardware reason last night. I had the Genius look at that issue too. He had no idea what was going on. He told me to try restoring my backup to the new phone and if I had the same problem, come back.
It's not that easy to get an appointment and head over to an Apple location, so I'm hoping someone on this forum has a solution.
Thanks!

To clarify, this has happened on two consecutive phones?
If yes, it would seem to point to dome bad data in the backup. I know this sounds less than fun, but if it is the case, could you try restoring the phone as a new phone and then add the email accounts to see if you can email then? If it still doesn't work, you can always restore your old backup. If it does work, you won't want to use that particular backup. That would mean tackling the pain in the tukus task of repopulating your iPhone from scratch. But it would all work.

Can I import (or create) default Lightroom settings from an existing document?

Can I import (or create) default Lightroom settings from an existing document and save them? Make them a personal default set opening with all future LR catalogs?

Thank you, John. That brings up the question: How to build a template?
BTW, I'm not trying to duplicate a catalog; moving it to a larger drive. When opening the newly moved catalog in LR, my former settings (identity plate, defaults, etc.) didn't migrate, though I copied the LR settings folder and its contents into the new location (drive) and opened my develop presets.

Can standby controlfile be created after backup

can we take the online backup of primary database first and then create standby controlfile.will it be useful.
as i have yesterday backup..now can i create standby controlfile now and configure data guard by restoring that backup.
Regards

Hi,
user11221081 wrote:
can we take the online backup of primary database first and then create standby controlfile.will it be useful.
as i have yesterday backup..now can i create standby controlfile now and configure data guard by restoring that backup.
Regards
Yes, we can create standby control file, after backup.
What is your database version?
If you are using 11g version, then you can RMAN DUPLICATE command FROM ACTIVE DATABASE option.
This duplication is not backup-based duplication.
Regards
Mahir M. Quluzade

Duplicate columns created in attribute view

Hi
I created an attribute view as shown in the video Creating an attribute view | SAP HANA using the data given. After creating the attribute view as per the video, when I preview the data in the attribute view, I see that all the columns are created twice. For instance there is Company Name and Company Name 1, Contact_Name and Contact_Name1, ContactTitle and ContactTitle1 and so on. This has happened for all the fields.
I checked the table in the schema to see if there are duplicate fields there. But the DIMSupplier table in the STS schema has no duplicate fields.
What I want to know is how were these duplicate fields created in this attribute view and how do I remove them? I checked the output fields and there also there are no duplicate fields.
When I right click on the attribute view and select data preview, and then under the tab "Distinct Values" I can see all these duplicate field names. I am trying to delete these duplicate field names but I am getting an error message that the field you are trying to delete is being used elsewhere hence it cannot be delete.
Can anyone please advise how to fix this error.
Thank you.
Regards,
Pavan.

Hi Anjali,
Thanks a lot for your reply. But in my data foundation STS_ATTRIBUTE_VIEW, I do not see any duplicate columns to remove them. Today I see a warning and also I am unable to right click on the attribute view.
The warning is given below:
Message :
STS.STS_ATTRIBUTE_VIEW: one or more columns of Table: DIMSUPPLIER have invalid ABAP name
But in the Data Foundation in the Output tab under Columns I do not have any duplicate columns listed.
Also the attribute view is in grey color. Its not in green color even after clicking on Save and Validate and SAve and Activate.
I select the attribute view and hit on the data preview button. There in the Analysis tab under Available objects under String folder I can see all these duplicate column names. I right click on the duplicate column names and I see the options "Distinct Values", "Add to labels", values, filters and "Properties". Having selected the column name I hit on the delete button on my keyboard but nothing happened.
Is this because of the warning that I am getting. What does this warning mean?
Please advise.
Thank you.
Regards,
Pavan.

Can AAMEE 3.1 create pkg for CS6 Design Standard? or just CS6 Mast Collection?

can AAMEE 3.1 create pkg for CS6 Design Standard? or just CS6 Mast Collection?

ok, thanks, just wanted to make sure. I have a volume serial no. for CS6 Dest Stan.
AAMEE 3.1 is for CS6 Suite, so should be good for all CS6
I created a pkg for CS6 Mast Coll using AAMEE 3.1 a few months ago and works fine (.msi)

Since I updated my pages to 5.01, I can't open documents created on my iPad today. It says you need a new version of pages to open document. (My computer says it is installed). Has any one encountered this?

Since I updated my pages to 5.01, I can't open documents created on my iPad today. It says you need a new version of pages to open document. (My computer says it is installed). Has any one encountered this?

Well, here's what I found out that works for me...
I had a Pages icon on my dock, and launching it brought up version 4.3. But I went to my Apps folder and found the new updated icon there and when I launced that it brought up version 5.01. So apparently the Apple update process left two versions launchable on my iMac. Weird...
Rocketman

How can I export slideshows created in Aperture v3.3.2 from Mid-2009 MacBook Pro-17 to blank DVDs?

(Fifth futile attempt in two hours, before I learned there was a Post webpage – I’m new to ApSuppCom - and after I learned that I am not allowed to update previous content, so I had to back out, make a few changes, and start over.) How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ? (Some other specs: Mac OS Lion 10.7.5; Capacity 499.5 GB; Processor 2.8 GHz Intel Core 2 Duo; Memory 4GB 1067 MHz DDR3; Graphics NVIDIA GeForce 9400M 256MB)
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.” Advisors and Mac Geniuses at local Apple Stores have told me to try Roxio Toast. When I visited the Roxio website, and found numerous other company products, the descriptions all seemed to suggest that most of the apps shown can easily export videos to DVDs, but nothing was said about finished digital slide shows being exported. At future events soon, I hope to be handing out these finished DVDs (free) to the people in them. Any help will be greatly appreciated. A.Z.

How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ?
Aperture cannot burn slideshows to a DVD. It only can export a video of your slideshow.
In Aperture 3 you use the "Export" button in Aperture's slideshow project to render a video to a folder on your disk.
Then you use iDVD or another program to burn a video DVD.
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.”
Could you please describe the exact steps that are causing these error messages?
How are you exporting your slideshow from Aperture? Which settings are you using? And how are you importing the video to iDVD or Toast to burn a video DVD?
For more suggestions see Karsten Schlüter's user tip: How to create a video-DVD? (Macs without iDVD)

How can I duplicate a control in a subVI using the reference?

Here's what I want to do. I have a tree control in my main application. I add and delete items dynamically based on user input. If I pass my tree reference to a subVI, I can add, subtract and reorder the items in the tree and the changes are shown on the main tree. How can I duplicate the tree in the subVI? Would I simply pass the tree control in (which I'd rather not do) or is there some other way to accomplish this?
Thanks in advance for any help.
Gary

Here's my attempt. This VI uses a control reference of the old tree and generates a data structure that can be used by the "Edit Tree Items.Add Multiple Items to End" method to add contents to the new tree that should be identical to the contents of the original tree. Note that this VI only works with LabVIEW 8.0 and later, since the afore-mentioned method is not available in previous versions.
I hope this helps...also note that I saw some re-draw issues with LabVIEW 8.0, i.e. after the VI ran, I didn't see the tree displayed properly until I minimized/restored the window, or dragged another window over it. I did not see the redraw issues in LabVIEW 8.2.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
Duplicate Tree.vi ‏21 KB

Can database activities of creating or dropping tables/packages be tracked in the security/system logs

Can database activity like create or drop tables and packages be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
Can purging of oracle log, n case the file has become big or even tempered be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?

2765539 wrote:
Can database activity like create or drop tables and packages be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
Can purging of oracle log, n case the file has become big or even tempered be tracked in the security/system logs of windows 2003 server for the oracle database 10.2.0.4?
Your first question is easy, you configure audit to log to the OS audit trail with
alter system set audit_trail=os scope=spfile;
and then enable audit for whatever actions you want to capture. All documented in the Security Guide.
Your second question makes no sense unless you explain what you mean by "oracle log".

Why can I no longer create/access playlists on my iPod since I upgraded to iTunes 10.5.2?

Why can I no longer create/access playlists on my iPod since I upgraded to iTunes 10.5.2?

I have the same situation. I believe I disconnected iCloud by going into preferences and also unclicking the box for Contacts. What am I missing?
Larry

Can I duplicate lights created in PS 14 Render/Lighting Effects?

Similar Messages

Maybe you are looking for