Can i edit a vector shape after it's been deselected?

can i edit a vector shape after it's been deselected?
the properties palette seems to loose it's values apart from density and feather. Can I not return to a shape to add rounded corners etc?

That's because you're on the mask pane instead of the object properties pane in the properties panel.
Look at the icons at the top of the panel that show different panes.

Similar Messages

  • Can't edit masks or shapes after creation..?

    I have no idea why... it used to work fine.
    When I make a mask, and finish connecting it, I can't edit it afterwards...I can't select anything, any of the corners, I can move it around but that's about it.
    Yes I'm using the right tool, and I have handles and lines enabled...I don't know what to do but I really need this fixed.
    Any help is appreciated.. Thanks

    Apparently.
    I've not seen this problem. Is there anything you've changed since it worked? New Mouse? Any updates? Anything?
    And I know you said you are using the right tool, just wanna make sure it's this one:
    Patrick

  • HT1438 how can you unlock an iphone 4 after is has been disabled?

    how can you unlock an iphone 4 after is has been disabled?

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
         After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • How do I edit a rotoscope shape after it's created?

    I have read the manual, but can't get my roto shape (made with b-splines) back into edit mode to adjust the position of my control points. I've read the manual (yes, I did), and on page 279 of the Motion 3 manual it describes how to do this, but it just doesn't work. I know I take take the scene into Shake and do this really easily, but I don't want to re-do a bunch of other work. Any suggestions?
    Oh, and I do have Handles and Lines checked off in the View pop-up menu over the Canvas, and the adjust control points tool selected (upper left of canvas window), in addition to having my mask selected in the timeline, just for the sake of additional clarity.

    Thanks guys, those are good tips. I have tried this on my laptop, and your tips work. However, I have noticed that upon creation of a b-spline or bezier mask on my desktop machine, I do not enter edit mode upon closing the mask points. The points are simply not there. The "Edit points" option in the contextual menu (control click) is selected, but no points are visible. However, on my laptop (MacBook Pro), all works as it should, and the masks are immediately converted to edit mode upon closure of the mask.
    I tried a re-install of the Final Cut Studio programs, but that didn't help. Also, deleted the Motion package, and copied from the laptop, and no change for the better.
    Any ideas about what is happening here? Thanks for any help at all. Getting a little frustrated here...

  • Can't edit Roxterm default profile after GTK updates

    Am running fully updated system with Roxterm (2.2.1-1) and GTK (3.2.0-2).
    Now, if I right-click on a Roxterm terminal and select 'Preferences / Edit Current Profile', nothing happens except the following error is logged:
    ** ERROR **: Unable to load GTK UI definitions: Invalid object type `GtkDevel'
    Anyone else finding this problem? Is is related to the recent GTK3 theming problems reported? If so, I should mention I'm using the standard Adwaita themes for both GTK2 and GTK3 ...

    Here we go again, with today's update to version 2.4.2-1:
    Again I can't 'Edit Current Profile' or 'Edit Current Colour Scheme'; but quite a lot of errors are displayed (with or without a fresh configuration):
    $ roxterm
    (roxterm:6119): Gtk-WARNING **: Error loading icon from file '/usr/local/share/icons/hicolor/scalable/apps/roxterm.svg':
    Failed to open file '/usr/local/share/icons/hicolor/scalable/apps/roxterm.svg': No such file or directory
    ** (roxterm:6119): CRITICAL **: Unable to read keys from shortcuts file Shortcuts/Default: unknown reason
    ** (roxterm:6119): WARNING **: Shortcuts signal handler already disconnected
    ** (roxterm:6119): CRITICAL **: No menu item matches profile/scheme 'GTK'
    ** (roxterm:6119): CRITICAL **: No menu item matches profile/scheme 'GTK'
    ** (roxterm:6119): WARNING **: Failed to connect to session manager: SESSION_MANAGER environment variable not defined
    (roxterm-config:6124): Gtk-WARNING **: Error loading icon from file '/usr/local/share/icons/hicolor/scalable/apps/roxterm.svg':
    Failed to open file '/usr/local/share/icons/hicolor/scalable/apps/roxterm.svg': No such file or directory
    ** ERROR **: Unable to load GTK UI definitions: Failed to open file '/usr/local/share/roxterm/roxterm-config.ui': No such file or directory
    PS: Returning to Sakura meantime
    Last edited by ninian (2012-01-20 19:57:06)

  • Can I edit between Premiere Pro & After Effects without having to Render??

    Im trying to edit these videos my method was look through the long videos and select clips I want and export them so I could work on AE..
    The thing is that the videos loose a lot of quality when I render them on export.
    Yes I know I could use After Effects and cut the clips in there but the problem is that it doesnt really cut the clip it just shadows out the rest of the video.
    Light Blue: Section I want Shadow Blue: Rest of video
    This is bothering me when I try to use time remapping..
    or is there any way to actually chop it off??? so that there wont be no shadow..
    or is there any way to work between them withouth having to render..

    The thing is that the videos loose a lot of quality when I render them on export.
    Then you are using wrong settings, plain and simple.
    This is bothering me when I try to use time remapping..
    How so? Nothing stops you from adding additional keyframes at the trim marks, pre-compose the layer or whatever.
    Mylenium

  • I can't edit my keyframes in after effects? (please help)

    Okay so the other day I purchase after effects, everything was working fine until this happened:
    http://gyazo.com/1ad100e3404c6e7c06e01407d2b8e7a8
    (click on the link screenshot)
    This is really bugging me and i've uninstalled and reinstalled with no results.
    My computer's specs are in this screenshot:
    http://gyazo.com/5fbeaff62b6136cd74a177e251500ac0
    Just explain to me all the options i can take towards fixing this.

    You simply have hidden the A/V column. Right-click on the column headers and reveal it from the list. If it has shrunk together so you can't expand it again, trash the prefs to restore factory defaults.
    Mylenium

  • How can I edit my warranty details after registration?

    Hello
    Can someone please tell me how do i edit warranty details of a product that I have recently registered?
    Thank you

    As far as I know you cannot change these saved details.
    Contact Toshiba directly and explain the situation. They can do this and change all data saved in their database.
    Send a mail on [email protected]
    You must contact Toshiba in your country. Contact details can be found at http://eu.computers.toshiba-europe.com/innovation/contact_toshiba.jsp
    Dont forget to send exact notebook model, serial number and your full address.
    Explain also what should be changed.
    Message was edited by: ADMIN

  • Can I delete Original Media folder after its all been transcoded?

    So i remember reading that most footage you import should be transcoded. Though Final Cut Pro "works natively with formats like h.264 and dslr movs, it is better to have it optimized into Pro Res and transcoded." Having listened to that, I have Optimized all of my media that I have importated however now I have double the media in my FCP Events folders because I have both Original Media and Transcoded media. This leads me to a few questions...
    1) Can I delete the Original Media folder if all my my media is transcoded? How will this effect my timeline and projects? Will this free up space? How can I verify all of my clips have bene transcoded?
    2) Can I delete the Transcoded Media and go back to using the Original Media? Will this mess up my timeline and projects that I have started editing or will it revert the media in my projects back to the Original? Which would run faster/better performacne Original Or Transcoded? I shoot all of my footage on a Canon 7d DSLR 24/30 fps 1080p, H.264.
    3) What workflows have you used so that you dont dobule anything? If this project is a loss, what should I be doing in future events when importing? Should I send to Compressor and transcode there BEFORE I import into FCP. That way I am only importing the Transcoded stuff?
    Thoughts?
    Mike

    1- Yes, you can delete the Original Media folder, FCP will only read from your Optimized Media folder then.  But move it to the trash first, then launch FCP X and test it out, before emptying the trash.
    2- Yes, again, test it as I mentioned in 1 above.  Once you remove either Original or Optimized, it's gone, that's it.
    3- Always let FCP do the transcoding, doing it in Compressor gains you nothing.  You shold base your decision to optimize on the hardware you're using and the amount of storage space you have available.  H.264 is super compressed.  ProRes uncompresses it and is more of it's natural file size.

  • I can't see my junk mail after it has been automatically removed

    For a POP account I have used for years, the Junk mail folder suddenly won't show what's in it. It says I have numerous Junk mails when they arrive (the red circle number), but when I click on that mailbox folder, there is nothing there, yet I still have to manually delete the junk to get it off the server. This is only true on a silver Imac. the same account works just fine on a Macbook and several PowerPC iMacs. Anybody else have this problem, & how can I fix this?
    <Edited by Moderator>

    I bought a new external drive two weeks ago and started using Time Machine, and that has triggered no end of problems around the same time that this started. so I finally shut it off (Time Machine, that is.) It also behaves in a really flaky way when I use Firewire to attach that drive. USB seems to work okay.
    I haven't attached that drive to another computer yet. Also, my MobileMe account has screwed up my mail a few times.
    I've been a Mac user since 1985, and have never had such reliability problems as in the last month.

  • I have created a site but can't open it in iweb after it has been done.

    I created a site using iweb, and then tried one of the free templates that a website was offering. After I open the template I was no longer able to open the site I created. I can locate the files in the Sites folder, but it will not allow me to open it.
    Does anyone know what I can do so I don't have o recreate it all over? This would be a total nightmare!
    Thanks,
    RandyfromLacey

    If the files are in your sites folder, then iWeb will never be able to open them because they contain your published site.  iWeb has no import facility so is unable to open html pages - a previously published site.
    You need the data storage file called domain.sites to be able to access your site again.  This can be found under User/Library/Application Support/iWeb/domain.sites.  Find this file and double click it and iWeb will open it.
    Note that you need to look in your User Library and not your System Library, as you won't find iWeb there.

  • How to edit/modify workflow task after it has been completed?

    My workflow spawns a couple tasks and once those tasks are completed, they become non-modifiable. If the user made a mistake by entering wrong details while completing the task and would like to change it later, he cannot do so once he hits the complete
    button. This is happening in SharePoint 2010.
    We were using SharePoint 2007 earlier when this wasn't the case. The tasks could be modified even after they were completed. I would like to have the same behavior in 2010 too. Please suggest how can I do it? There should be some task settings to enable
    modification but I just can't find them. 

    Hi,
    Thank you for your question. I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience. Thank you for your understanding and support.
    Thanks,
    Linda Li
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • How can I recover/restore recent history after it's been deleted?

    My daughter deleted recent history. My Facebook account has a layer of protection that stored my computer information. When she deleted the history, Facebook no longer is able to detect my computer and I am not able to log into Facebook. How can I recover or restore the history (everything)?

    index.dat is not one of the files used by Firefox, that is for Internet Explorer. You may need to contact Facebook to get access to your account again.
    Once history and cookies are deleted in Firefox they can not be recovered.

  • Can't connect to Time Capsule after MacBook has been closed

    Hey guys,
    While ago I bought a 2TB Time Capsule to back-up my movies and music to, because my MacBook Air only has a small SSD.
    It worked fine for a while but now I'm experiencing some problems. Everytime I close my MacBook and open it again, it can't connect to the Time Capsule anymore. I have to reboot the macbook and then it works again. Any idea how I can fix this? I also connected my iMac in the other room to it but I don't think that should be the problem.
    Greets and thanks

    Give this a try:
    1. Start AirPort Utility, then let it remain open.  You can hide it but do not quit, 
    2. System Preferences>Energy Saver>Power Adapter>uncheck "Wake for access".
    Any improvement?

  • Is there any way I can get a new ipod touch after it has been stolen and police report filed?

    Someone stole my ipod touch from my purse at church. Can u believe that? I called apple and all they say is that i can file a police report. Thats all they can do. I can't get a new one??? i filed the police report. what do i do now??? just wait??. well i found out where they live. I located the ipod on a map and the exact house and name. should I just go over there and take it from them?? lol

    Pay serious attention ot Illaass's advice about the police. Don't try recoverying it yourself, or forcing a confrontation with the alleged thief.
    Good for you that you installed and activated Find My iPhone! Now get yourself to your local police station right now with the information from Find My iPhone printed out if you can. The sooner you do this, the more likely that they can recover your property.

Maybe you are looking for