Can I edit Nikon D5100 RAW photos in iPhoto '09?

I recently shot photos for an event with my Nikon D5100, using the RAW + jpeg setting. I uploaded my photos into an iPhoto event, and both the RAW and jpeg photos appeared in the event. I have read that iPhoto '09 supports lossless RAW file editing, so I selected one of the RAW photos and attempted to edit it. iPhoto entered the edit window, but the image appeared blurry and all of the editing tools were grayed out. Photo editing works fine with the jpeg files in my event. Also, when I double click one of the RAW images it opens it as a gray exclamation point icon.
More information: I am running OS X 10.6.8, and iPhoto 8.1.2. The page at the below link indicates that the D5100 is supported in 10.6.8, without mention of a specific RAW Compatibility update that must accompany the OS. I am assuming that since iPhoto '11 requires OS X 10.7.5 or later this information applies to my use of iPhoto '09, though any RAW compatibility updates on the Apple site for download are either only for iPhoto '11 or already installed on my computer.
Any insights on what may be going wrong? Thanks.
http://support.apple.com/kb/HT3825

I believe that the 5100 will work on iPhoot 09 and 10.6.8 and these issues:
I selected one of the RAW photos and attempted to edit it. iPhoto entered the edit window, but the image appeared blurry and all of the editing tools were grayed out. Photo editing works fine with the jpeg files in my event. Also, when I double click one of the RAW images it opens it as a gray exclamation point icon.
are due to the fact that iPhoto cannot find the Raw file - that's what the ! means.
Are you running a Managed or a Referenced Library?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

Similar Messages

  • Can't Get my PSE-9 to Accept My Nikon D5100 Raw photos

    I have pse-9  and a D5100 camera. Also am set up to do my mac iphoto editing externally. When I want to edit a jpegphoto, it works fine but Adobe says it will not accept a raw file. I see adobe now says it will support a D5100 camera and that I will need a Camera Raw plug in 6.4. My pse has 6.1.. So I finally was able to download camera raw 6.4 but adobe installer refuses to install it and keeps asking me for some type if serial number for Adobe Flash Pro cs4 which I don't have !! Help

    As you have followed the instructions to post to the Photoshop Elements Forum, I will Lock this thread, so that all discussion can continue in the one on the PsE Forum.
    Good luck,
    Hunt
    [Thread Locked]

  • Can i open and edit nikon d810 raw files in lightroom 4.4

    can i open and edit nikon d810 raw files in lightroom 4.4

    No. Lightroom 4.x will never be able to open Raw files from the D810.
    D810 support has only just been added to the RC version of Camera Raw 8.6. It is never retrospectively added into older versions.
    Adobe Photoshop Camera Raw 8.6 RC for CC and CC 2014 Release Candidate | digital camera raw file support - Adobe Labs
    Adobe will probably add D810 support to the next version of Lightroom.
    Either way you'll have to upgrade to Lightroom 5 to be able to open D810 Raw files in Lightroom.

  • How can I export a RAW photo from iphoto to anywhere without it changing into a jpg?

    How can I export a RAW photo from iphoto to anywhere (PSE, or desktop) without it changing into a jpg???

    See if any of this info will help:
    Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
    1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    Click to view full size
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.  3 - however, if you get the navigation window
    Click to view full size
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
    Click to view full size
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Click to view full size
    NOTE: If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window".  That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu).  This way you get the best of both worlds.
    OT

  • Suddenly, when I attempt to edit a RAW photo in iPhoto it turns a dark shade of green and won't allow me to adjust exposure.

    I have an iMac with a 3.4 GHz Intel Core i7 processor and running OS X version 10.9.5. I have iPhoto 9.5.1.
    Suddenly, when I attempt to edit a RAW photo in iPhoto, it turns a green shade and won't let me adjust exposure. I can view the pictures in the events page just fine. However, I'm noticing that when the RAW pictures turn that green shade they tend to stay green regardless of when I'm in edit mode or not. Please help.

    Did you install RAW update 5.07 recently? Mine was installed 9/18 - look under updates in the App store.
    As to TM I suggest you not mess with its backups - it manages them and makes space as required - it builds a complex set of data so it can restore any file at any time for as long as possible - if you mess with its data you may cause problems for future restores - see Mac Basics: Time Machine backs up your Mac
    If your backup drive fills up
    As your backup drive begins to fill up to its capacity, Time Machine intelligently deletes the oldest backups to make room for newer ones. It also alerts you if the "Notify after old backups are deleted" option is selected in Time Machine preferences.
    LN

  • How can I share/view/edit all of my photos in iPhoto on iMac with iPhoto on MacBook Pro?

    I have all my photos stored on iPhoto '11 on my iMac.  I have a MacBook Pro Retnia with iPhoto that I would like to be able to view these same photos on. Is this possible?  If so, please let me know how?
    Also, if possible, can I edit and/or download photos to one computer's iPhoto and have them updated (sync) with the other computer?
    Finally, how do all of these photos with edits, etc relate to what I see on my iPad 3rd generation and iPhone 5?
    Thank you, in advance, for your assistance.

    To view your library on another computer on the same network, you could use "Sharing". Set the iPhoto Preferences to share your entire library or selected albums:
    Also, if possible, can I edit and/or download photos to one computer's iPhoto and have them updated (sync) with the other computer?
    iPhoto Libraries cannot be synched between computers. If you want to have the libraries on both computers identical, you need to use the same library on both machines. Store your iPhoto library on an external disk (formatted MacOS X Extended (Journaled) and plug the disk into the mac you are currently working with. Don't put the library onto a network drive - that will be a very sow access and may corrupt your photo library.
    To add new photos/events to iPhoto your other mac you can use the Photo Stream.
    Finally, how do all of these photos with edits, etc relate to what I see on my iPad 3rd generation and iPhone 5?
    You can only sync one iPhoto library with each OS device. If you sync a device alternately with each computer using iTunes Photo sync, the albums synced from the other photo library will be replaced by the new sync.
    Regards
    Léonie

  • HT3825 I can't open Nikon D7000 raw files in Photoshop CS5.  Any ideas how to do it

    I can't open Nikon D7000 raw files in Photoshop CS5.  Any ideas how to do it

    This page might help.
    Note that your question does not relate to Apple software nor hardware.

  • How can i open Nikon D610 RAW files in Element 12 ?

    How can i open Nikon D610 RAW files in Element 12 ?

    You need the ACR 8.3 plug-in to open D610 NEF files.
    Check what Help / About Plug-ins / Camera Raw reports for the version number. 
    If it is something less than 8.3, update to the ACR 8.3 plug-in using Help / Updates from the Editor.  If that says there are no updates, then uninstall and re-install and try again.
    If it is already ACR 8.3 then the files are likely corrupted by using an obsolete version of Nikon Transfer or ViewNX with them.
    You can fix that corruption using a utility from the following webpage, where 14-bits is likely what you’d want to specify, and only use Nikon utilities that are as new as your camera:
    http://owl.phy.queensu.ca/~phil/exiftool/fix_corrupted_nef.html

  • I can't read Nikon D5200 Raw NEF files with CS6 under Windows 8.1?

    I bought a new PC so I could use Photoshop CS6 more efficiently.  However, after I installed CS6, I can't read Nikon D5200 Raw NEF files under Windows 8.1.  I've tried updating CS6, but nothing seems to work.

    First, I hadto load the most recent version of  the Adobe Application Manager.  Then I could see all of the CS6 Updates including the most recent Camera Raw update.  
    I had to run one update at a time for it to work correctly.  
    But now I'm cooking with gas.
    Thanks for your help.

  • Can Lr5 read Nikon D610 raw picture?

    Hi, I downloaded Lr5 and installedt, but it can' t read Nikon D610 raw picture, why? hope for help, thanks!

    The D610 is a very new camera.  The next version of LR, 5.3, will support it; however, you can download the release-candidate from Adobe Labs, and use that while waiting for the final release:
    http://labs.adobe.com/

  • Nikon D3000 Raw photo support

    When are you going to support the Nikon D3000 RAW format in iPhoto 09?

    No one here every will - this is strictly a user forum
    Apple may some day
    This is the current list for Snow Leopard and iPhoto '09 -- http://support.apple.com/kb/HT3825
    LN

  • Error opening New Nikon D300 RAW files on Iphoto and Preview

    hi,
    I've a new Nikon D300 and I've had problems when i try to import the RAW (.NEF) photos to my iphoto... it says that the file is unreadable either on Iphoto or Preview or even on Apple Aperture. How can i solve this problem? is there any update that i can do for that or Apple didn't upgrade the iPhoto yet? I l know the camera can take 14-bit Raw format photos but i'm not sure if it is taking them in 12-bit because it can take both. I have a Nikon D200 too and i've never had any problem uploading my Raw photos to iphoto. the only program that opens the photos yet is Photoshop CS3.
    hope, someone can help me.
    Many Thanks:
    Gonçalo Rendeiro

    hope this 10.5.2 solved the problem
    http://docs.info.apple.com/article.html?artnum=306835

  • How can I print a full frame photo from iPhoto 11?  Even though I click on scale to fit paper size, it crops both ends of the photo in landscape set up.  I have an Epson R1800 with the latest drivers.

    How can I print a full frame photo from iPhoto 11?  Even though I click on scale to fit paper size, it crops both ends of the photo in landscape set up.  I have an Epson R1800 with the latest drivers. (I'm also 3 days new to iMac and iPhoto 11 from an eMac and iPhoto 6.)

    " Hello Jeff. Here at Oki Data, we do not support programming.  I would recommend contacting Adobe for further assistance. You can also browse their website at http://www.adobe.com/products/postscript/.

  • Why can I no longer swipe between photos in iPhoto?

    why can I no longer swipe between photos in iphoto?

    I will request that your query be relocated to the iPhoto forum where knowledgeable iPhoto user will be able to assist you.
    Ciao.

  • How can i add text to a photo in iphoto

    How can i add text to a photo in iphoto?

    Have a look at this discussions page.   ...
    how to add a text to a photo in iphoto?: Apple Support Communities
    Depends to some degree on what iPhoto version you are running but on the  whole this covers most.

Maybe you are looking for

  • Adobe photoshop cs2 activation

    Hi, I have original Adobe photoshop cs 2 product with key, but when I am trying to activate, appear error: activation server is not available at this time. Could you help me ?

  • Debugging inbound call - need debug command

    I am debugging what I believe to be a dial plan issue on PGW but want to run a debug command on the ITP to show the actual called number of the inbound call. What is the best debug command to use to see the inbound called and calling numbers of a cal

  • Mass change of Serial number

    Hi SAP Gurus, I have a Requirement to change the serial number / Material in huge numbers. Is there any way to change the Material / Serial number in mass maintanence functionality? Please let me know any other functionality. Regards, Senthil

  • Trying to get to comcast email, I get a window stating Report error 400 to them. They say "A mozilla problem," HELP?

    Repeating: "Trying to get to Comcast email, I get another pop up window stating 'Cannot get on email, report to Comcast, need help, and Error 400. I did; they analyzed, and say it is a Mozilla problem. Can you help? I have found a way to get to my em

  • EHS for OSHA reports

    Hello Gurus - I am on an SAP HR project.  Our client is having us implement EHS for the single purpose of being able to generate OSHA reports.  What sub modules of EHS do we need to implement at minimum to generate the reports?  I am a little confuse