Can I establish a symbol to type a phrase

how many times to I type my email address? Can I establish a symbol that when tapped will print my email address?

There is also the possibility to use a variable but this might not be what you want.
In this example you can play each page and use the close button to close the current page. If you try to play the other pages without closing the current, it will not work - only the close button with work to reset all the page's button to be able to play.
Just try it:
click a page button -It will play that page - now try to click the other page buttons - will not work.
click the close button - it will close the current page.
Now you can clck any page and it will play and so on.
Example: https://app.box.com/s/bfg0lvy0spzwinefqzn7

Similar Messages

Can we maintain differant Symbolic accounts for One Wage type?

Hello,
May you plz, clarify my doubt? Can we maintain differant Symbolic accounts for One Wage type?

HI,
Yes u can maintain any no of symbollic accounts for one wagetype...
A wage type can be assigned to several symbolic accounts. This is usually the case for wage types that should be posted as both expenses and payables (for example, wage types for the employers contribution for social insurance).
U can also check this in link...
http://help.sap.com/saphelp_47x200/helpdata/en/f3/21e091110b4e46983af70d772a40b2/frameset.htm
Hope this solves ur issue
Reward if helpful
Asha

Can I Create A Symbolic Link to folders stored on an SMB Share folder?

Hello,
I am very new to Unix and was hoping that someone could point me in the right direction with regards to Symbolic links and an SMB share folder ....
Have purchased an ext. LAN Drive enclosure (http://www.macpower.com.tw/products/hdd3/pleiades/pd_usblan) which connects to my wireless router via ethernet like my G5 (main Mac) - our iBook connects via Airport. I have copied all my general documents/files to the SMB share folder on the ext. drive so that I can access them from the G5 and also the iBook.
However I'd also like to be able to store my actual Mail folder (/Users/Mark/Library/Mail/), , Safari folder (/Users/Mark/Library/Safari) + my Address Book and other folders sitting in the Application Support folder on my SMB share so all important docs/folders are in the one place. I've tried storing these folders on the SMB share and putting an Alias to these back in Users/Mark/Library/Mail etc but of course an Alias doesn't work.
Question 1: Can I create a symbolic link to these files if these are stored on an SMB share folder? If so, could you please tell me exactly what I'd need to type into Terminal? My SMB Share path is smb://STORAGE-XXXX/MARK
I have copied my iPhoto library and iTunes library to the SMB share and are working fine.
Question 2: Is it possible/worth attempting to move my whole home folder to the SMB share folder? Ideally, I'd like to be able to access my Mail from the iBook as well. If I could log into either the G5 or the iBook and access my latest Mail, Address Book and other Application Settings, that would be perfect. Would this be possible?
Thanks
Mark.
Dual 1.8GHz G5 (Rev.B), 2Gig RAM, 9600XT Mac OS X (10.4)

Dear Mark,
Yes you can. The command to create a link will look something like this:
$ ln -s thisFolder /Users/mark/thatFolder
I did this while I was hosting a microsoft based game. This put all of the players into a common directory.
SMB just resolved the link and everything worked fine.
However, as I understand it, some other applications do NOT work very well with links. As I have NOT tried it with other applications, I fear I can be of NO help to you in this matter.
The only way to find out which applications work with links is to try them and see what happens.
Best of luck,
Kurt

IIOP Connection, Oracle 8.1.5, JDeveloper 3.0: Can`t establish connection

Hi,
I can`t establish IIOP Connection from JDeveloper 3.0 to Oracle 8.1.5 Enterprise DB Server.
Let me describe my situation:
One PC running Oracle 8.1.5 DB Server under NT Workstation 4.0 (host: leobeln)
Another PC running JDeveloper 3.0 under NT Workstation 4.0 too.
At server side, I used Net8 Assistant to configure a listener as follow:
Name: listener_iiop
Protocol: TCP/IP
Port: 2481
Host:leobeln, and checked the option: "Dedicate this endpoint for IIOP Connections"
I set de Database Service tab as follow:
Global DB Name: Test
SID: Test (both name and SID are correct)
Finally I saved this configuration and sarted the listener using LSNRCTL utility.
When try to test connection from JDev, I receive the following error message:
Can`t find resource for bundle oracle.aurora.jndi.sess_iiop.Message, key UNKNOWN_SERVICE:default.
The connection properties are:
UserName: scott
Connection Type: IIOP
URL: sess_iiop://leobeln:2481:Test
The final objective is to deploy an App Module (BC4J) on Oracle 8i platform as EJB Session Bean
somebody may help me ?
Thanks
PP

Try connecting with the command line sess_sh tool that comes with your database. If that fails as well, then post a message to the Oracle JVM forum here for assistance.
Take Care,
Rob
null

Can "SPML Web Service Complex Data Type field" take multiple values ?

In Generic Technology Connector's -SPML design parameters section, Can we give multiple values in SPML Web Service Complex Data Type field?
If not, how can i call methods directly instead of calling them through a values of the "name" attribute of the "complexType" element in SPML Web Service Complex Data Type?
I need 'SPML Web Service Complex Data Type' to hold multiple values.And based on the request it has to initiate appropriate method of action.
Presently i have three methods add,modify and delete which i am calling through a single value of the "name" attribute of the "complexType" element in SPML Web Service Complex Data Type.
I want to replace this single value with multiple menthods , so that a direct interaction between the method,OIM and target can be established.
Edited by: 821054 on 16/02/2011 04:23

Thanks Robert.
You'll need to create your own interface to the webapp database for those kind of data operations
by this, are you speaking of the internal BC database which stores web app schema data? That would be great if it were possible to update that programmatically because I need to use the List (Checkbox List) field type (for the search functionality), but I need to supply the checkbox options from a web app rather than by manually updating the list entered in the Fields view of the web app settings (shown below).
I'm curious if anyone else has tried this?
Again, my reason for needing to use the List (Checkbox List) field type is that the page which processes searches knows to expect a comma separated list for this field type and then appears to be parsing out the individual values for searching out web app items with 1 or more matching values. You're right that text fields (string and multiline) just check for 'string contains' matches, and this would be ok if I was only ever needing to search just one value at a time. Here's an example of what I might do:
Web App item field value (as recorded against the List (Checkbox List) field type:
8294877,8294878
Web App Search value (for this same field):
8294879,8294877,8294885
The search would return this web app item because the field contains 2 (1 or more) individual values even though they were entered into the search field in a different order. If this web app item were just a Text (string or multiline) field, the searched value is not a substring of the web app item's stored value, so it would not find a match. Hence the need to use Checkbox List field type.
The web app will have thousands if not 10s of thousands of records, so dumping them all into one big array or object and searching on the front-end won't be practical (though it works great on smaller datasets).

How can i print currency symbol in smart form?

how can i print currency symbol in smart form?
i want to print the currency symbol with grant total based on the vendor currency.
pls hepl............

Hi,
think You can't print the symbols for currency like $ and Pound etc
see this doc if needed
A variable in SAPscript is called a symbol. There are the following types.
System symbol (e.g. the number of the current page)
Standard symbol (usable in any document)
Program symbol (value from the print program)
Text symbol (local variable)
The value of a symbol is text for using within SAPscript code and is represented by the symbol-name enclosed by ampersands. On seeing the tell-tale ampersands in SAPscript code, you sometimes need to figure out the symbol type.
goto any PAGEWINDOW's Text elements in Script (SE71)
from the Menu-> INSERT-> Symbols
you find all symbols here
System symbols
System symbols in a SAPscript form are comparable to system fields like SY-UZEIT in an ABAP program, and include these. The graphical editor offers three types of system symbol.
1. General system symbols
See the table TTSXY. PAGE is the most widely used. The list given in our BC460 training manuals is out of date.
2. SAPscript system symbols
See the dictionary structure SAPSCRIPT. SAPSCRIPT-FORMPAGES is the most widely used.
3. ABAP system symbols
For the ABAP system field SY-UNAME, say, the symbol is SYST-UNAME. http://SYST is the dictionary structure for ABAP system fields.
Sample code:
User: &SYST-UNAME&
Page &PAGE& of &SAPSCRIPT-FORMPAGES(C3)&
Standard symbols
Standard symbols are maintained centrally (in the table TTDTG via transaction SE75) for use in any document. Menu path:
Tools
Form Printout
Administration
Settings
Some standard symbols are SAP-standard and others are custom. Curiously, table TTDTG is cross-client although SAPscript forms are not.
The value of a standard symbol has to be defined for each language used. This gives a way to make a single SAPscript form multi-lingual.
We can take advantage to an extent of the central maintenance, though there is no guarantee that the available standard symbols will used in every appropriate context.
Standard symbols complicate searching a SAPscript form, since text like Charity registration 211581 may be hiding in a standard symbol.
Text symbols
A text symbol is declared and assigned to within the SAPscript code, and so obviously applies only to the current document. The command DEFINE is used, requiring /: in the tag column, as in the following examples.
/: DEFINE &COMP_NAME& = University of Warwick
/: DEFINE &WS_RATE& = &TAX_SUMM_C&
Reward points for useful Answers
Regards
Shiva Kumar

How to use FIELD-SYMBOLS with TYPE ANY?

Hi!
I need to write a function which gets an import string parameter containing a field name like MATNR. In this function I have to "map" this string to a real variable so that I can access the field which is represented by the string. I tried it like this but it does not work:
FUNCTION ZTEST1.
""Lokale Schnittstelle:
*" IMPORTING
*"     REFERENCE(I_MARA) TYPE MARA
DATA: FIELD_NAME(30) VALUE 'I_MARA'.
FIELD-SYMBOLS : <FS_ANY> TYPE ANY.
Assign (FIELD_NAME) to <FS_ANY>.
Does not work (I guess because of 'type any')
WRITE: <FS_ANY>-MATNR.
ENDFUNCTION.
How can I solve this problem?
Thanks,
Konrad

This code is far from perfection...But at least it could help you to find the right track -;)
REPORT ydummy_atg.
DATA: w_mara TYPE STANDARD TABLE OF mara.
START-OF-SELECTION.
SELECT *
INTO TABLE w_mara
FROM mara.
PERFORM test TABLES w_mara.
*&      Form test
FORM test TABLES t_mara.
DATA: field_name(30) VALUE 'T_MARA',
        new_line TYPE REF TO data,
        flag TYPE c,
        w_tabix TYPE sy-tabix.
FIELD-SYMBOLS : <fs_any> TYPE ANY,
                  <l_line> TYPE ANY,
                  <l_field> TYPE ANY.
ASSIGN (field_name) TO <fs_any>.
CREATE DATA new_line LIKE LINE OF t_mara.
ASSIGN new_line->* TO <l_line>.
LOOP AT t_mara.
    MOVE t_mara TO <l_line>.
    ASSIGN COMPONENT 2 OF STRUCTURE <l_line> TO <l_field>.
    <l_field> = <l_line>.
    WRITE:/ <l_field>.
ENDLOOP.
ENDFORM.                    " test
Greetings,
Blag.

Can we write Field Symbols in SELECT statement?

Hi
Can we write teh Fiel Symbols in the SELECT Statement ?
Can you give how to write it, with Example ?
Regards,
N.L.Narayana

Hi,
Do you ask for that ? :
field-symbols: <field1> type any ,
               <field2> type any.
assign component 'TOTO' of structure 'TATA' to <field1>.
assign component 'TUTU' of structure 'TATA' to <field2>.
select single toto
       into <field1>
       from tata
       where tutu = <field2>.
Rgd
Frédéric

Can I use field symbol in AT events? How?

Hi all,
I want to use field symbol in <b>AT END OF</b> event
Can I use field symbol in such event as it takes table fields only.
Kinldy look in to pseudo:
Loop itab.
         AT END OF <FS1>.
         ENDAT.
Endloop.
I tried in my program but it's giving me a short dump.
If it is possible to use field symbol in AT events, kindly tell me how..??
Thanks in Advance.
Sagar

Hi,
i don't know your reqirement but it is possible:
DATA: t1(4), t2 TYPE i.
FIELD-GROUPS: header.
INSERT t2 t1 INTO header.
t1 ='AABB'. t2 = 1. EXTRACT header.
t1 ='BBCC'. t2 = 2. EXTRACT header.
t1 ='AAAA'. t2 = 2. EXTRACT header.
t1 ='AABB'. t2 = 1. EXTRACT header.
t1 ='BBBB'. t2 = 2. EXTRACT header.
t1 ='BBCC'. t2 = 2. EXTRACT header.
t1 ='AAAA'. t2 = 1. EXTRACT header.
t1 ='BBBB'. t2 = 1. EXTRACT header.
t1 ='AAAA'. t2 = 3. EXTRACT header.
t1 ='AABB'. t2 = 1. EXTRACT header.
SORT BY t1 t2.
*Here begins the definition of the field symbols
FIELD-SYMBOLS:
<t1> TYPE ANY,
<t2> TYPE ANY.
ASSIGN t1 TO <t1>.
ASSIGN t2 TO <t2>.</b>
LOOP.
AT FIRST.
    WRITE 'Start of LOOP'.
    ULINE.
ENDAT.
AT NEW <t1>.
    WRITE / '   New T1:'.
ENDAT.
AT NEW <t2>.
    WRITE / '   New T2:'.
ENDAT.
WRITE: /14 t1, t2.
AT END OF <t2>.
    WRITE / 'End of T2'.
ENDAT.
AT END OF <t1>.
    WRITE / 'End of T1'.
ENDAT.
AT LAST.
    ULINE.
ENDAT.
ENDLOOP.
Regards,
Gianpietro

How to modify field symbol of type Index Table with other field symbol of type any.

Hello Experts,
How is it possible to update an filed symbol table of type Index table with other filed symbol table.
e.g.
Field symbol : <lt_table1> type Index table.
Field symbol : <lt_table2> type Index table.
after some code...at run time these table filled like following.
<lt_tabel1 > has value fore column like c11 , c12 , c13
<lt_table2> has value for column like C11 , C12 , C13 , C14 , C15 . some extra values from <lt_table1>
Now I want to be modify <table1> one entires like C12 with <table2 > col C12.
how I can achieve this.
Regards,
Chetan.

Hi,
did you try ASSIGN COMPONENT xx OF STRUCTURE <IT_TABEL1> TO <IT_TABLE2>.
xx will contain the number of the column
or maybe, if you have the description with a field catalog or other, that will be easier ..
regards
Fred

HOW CAN I SEND FIELD SYMBOL TO SUBROUTINE

HAI,
         HOW CAN I SEND FIELD SYMBOL TO SUBROUTINE
         HOW CAN I COME BACK FROM 5TH INTERACTIVE REROT TO 2ND
INTERACTIVE REPORT.
THANK YOU.
ASHOK

Hi
Write some code in the program to come to 2nd list from 5th list
if sy-lsind = 5.
   sy-lsind = 2.
endif.
for field symbols see the doc
Field Symbols
Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
Field symbols provide greater flexibility when you address data objects:
If you want to process sections of fields, you can specify the offset and length of the field dynamically.
You can assign one field symbol to another, which allows you to address parts of fields.
Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
You can also force a field symbol to take different technical attributes from those of the field assigned to it.
The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
check the below links u will get the answers for your questions
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
Syntax Diagram
FIELD-SYMBOLS
Basic form
FIELD-SYMBOLS <fs>.
Extras:
1. ... TYPE type
2. ... TYPE REF TO cif
3. ... TYPE REF TO DATA
4. ... TYPE LINE OF type
5. ... LIKE s
6. ... LIKE LINE OF s
7. ... TYPE tabkind
8. ... STRUCTURE s DEFAULT wa
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
Effect
This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
You can only use one of the additions.
Example
Output aircraft type from the table SFLIGHT using a field symbol:
FIELD-SYMBOLS <PT> TYPE ANY.
DATA SFLIGHT_WA TYPE SFLIGHT.
ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
WRITE <PT>.
Addition 1
... TYPE type
Addition 2
... TYPE REF TO cif
Addition 3
... TYPE REF TO DATA
Addition 4
... TYPE LINE OF type
Addition 5
... LIKE s
Addition 6
... LIKE LINE OF s
Addition 7
... TYPE tabkind
Effect
You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
Effect
Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
Example
Address components of the flight bookings table SBOOK using a field symbol:
DATA SBOOK_WA LIKE SBOOK.
FIELD-SYMBOLS <SB> STRUCTURE SBOOK
DEFAULT SBOOK_WA.
WRITE: <SB>-BOOKID, <SB>-FLDATE.
Related
ASSIGN, DATA
Additional help
Declaring Field Symbols
Reward points if useful
Regards
Anji

Im trying to set up a connection to localhost from my mac but keep getting an error message: Firefox can't establish a connection to the server at localhost.

Hi
I'm new to working with Mamp, Dreamweaver and WordPress and am trying to work using the Firefox browser. unfortunately i keep getting the error message Firefox can't establish a connection to the server at localhost. when i type the URL http://localhost/explore_ca/blog/wp-admin I cant use Dreamweaver with WP without this is there a reason for this and how do i get around it?

1- Is your MAMP working '''whithout errors'''(does it show you errors while executing or running and enabling)?
2- Have you tested other browsers? Is your problem still occuring?
3- Are you using '''proxy '''or '''VPN '''(or setted a proxy server or VPN server on your Computer)?

Firefox can't establish a connection to the server at 127.0.0.1:8080.

Hi everyone!
I need your help. Im just a newbie in Oracle 11g. I'd just installed it last night and i found this problem:Firefox can't establish a connection to the server at 127.0.0.1:8080.
Can I ask what cause me to have that problem? Im using Windows XP, Service PAck 2.
Thank you for your replies and help. I'd badly need to this Oracle database to run..
Stay blessed. ^^

Hi Udo!
I've tried the lsnrctl status,(I'd just type what I think is important.. too lazy to type them all, hehehehe)
ALIAS:Listener
VERSION:TNSLSNR for 32 bit Windows, Version 11.2.0.2.0 Production
Trace Level:off
Security:ON, LOcal OS Authentication
SNMP:Off
Default Service:XE
Service "CLRExtProc" has 1 instance(s)
Instance "CLRExtProc", status unknown, has 1 handler(s) for this service
Service "PLSExtProc" has 1 instance(s)
Instance "PLSExtProc", status unknown, has 1 handler(s) for this service
when i tried the "sqlplus / as sysdba", it says:
ERROR:
ORA-01034:Oracle not available
ORA-27101:shared memory realm does not exist
Process ID:0
Session ID:0
Serial Number:0
Thank you.. ^^

Passing value from field symbol / variable type ref to data to variable

hey ,
DATA: NODE_FLIGHTS TYPE REF TO IF_WD_CONTEXT_NODE.
DATA: RT_CARRID TYPE REF TO DATA.
FIELD-SYMBOLS: <FS_CARRID> TYPE TABLE
.* Retrieve the data from the select option
RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_WEIGHT).
Assign it to a field symbol
ASSIGN RT_CARRID->* TO <FS_CARRID>.
how can i pass RT_CARRID or <FS_CARRID> to a varible with type vbap-netgrw ( net weight ) ?
thanks
ASA

>
ASA MOKED wrote:
> hey ,
>
>
> DATA: NODE_FLIGHTS TYPE REF TO IF_WD_CONTEXT_NODE.
>   DATA: RT_CARRID TYPE REF TO DATA.
>   FIELD-SYMBOLS: <FS_CARRID> TYPE TABLE
>
> .* Retrieve the data from the select option
>   RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_WEIGHT).
> * Assign it to a field symbol
>   ASSIGN RT_CARRID->* TO <FS_CARRID>.
create a work area of type <FS_CARRID>.
field-symbol: <fs_wa> type line of <FS_CARRID>.
loop at <FS_CARRID> into <fs_wa>.
lv_netgr = <fs_wa>-netgr.

Safari can't establish secure connection

Everything was working fine. Then all of a sudden when I try to open Credit Karma.com I get safari can't establish a secure connection to server. i have tried deleting all cookies. tried it on Firefox same issue. Its not my wifi because I can open the site using my iPhone and wifi. Just the 3 computers in the house will not open site

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1257 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1 250 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS="\f";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n    "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<13;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') nextfile;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"9\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"10\f%@d\f%s\f%d\f%d\n\",@d);printa(\"11\f%@d\f%s\f%d\f%d\n\",@e);printa(\"12\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' print\ system --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'G -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne launchd -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|commit - no t|deprec|fmfd|Goog|ndum|realp|sandbox ex|/root" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|hij|Ig|Jet|lid t|Plea" ' vm.swapusage );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Stylesheet Library\ paths{,' ('{shell,launchd}\)} Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes Heat Diagnostic\ reports Bad\ plists Free\ space 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99; for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 65 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 79 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 31 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 32;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 25 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 59 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 18 31 107 94 74||{ B2&&A1 18 26 94 74;}&&{ B7 11;B4 0 0 11;C3 23;};A1 18 26 94;B7 11;B4 0 0 11;C3 24;D4 60 14 66 92;D4 58 14 67 93;D4 26 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 29 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108; A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Can I establish a symbol to type a phrase

Similar Messages

Maybe you are looking for