Can I expand all patterns and effects in an illustrator file at once?

It would seem the answer to this is no, but thought I'd throw it out there. Any ideas?
Thanks!

Of course Ive tried this. But get the spinning wheel for longer than I would like to wait. Always having to force quit.
I imagine it would work if the file wasnt as complex. Will just do a few at a time. Cheers.

Similar Messages

Can I set all folders and displays to clean up files by name automatically?

It stinks having to clean up each folder individually by name of file. Is there a way to do this as a system preference so it will do it automatically for everything?

In the case you mentioned (COMMAND J) the answer is yes;
This is the default option on my MBP where one can change the parameters and they will always be reflected as such. Take note of the sliders, text size and so forth.
Ciao.

I bought this apple ipad from pawn shop and have receipt. its locked by previous owner and pawn shop had no info on previous owner to contact. how can I delete all content and start fresh so my grandson can use for college?

i bought this apple ipad from pawn shop and have receipt. its locked by previous owner and pawn shop had no info on previous owner to contact. how can I delete all content and start fresh so my grandson can use for college?

If it's activation locked, you can't; go back to the shop and ask for a refund.
(120778)

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

If you right mouse and select Get info it will show you the Apple ID used to purchase these songs.
Usually the name of an apple id is based on the email. So knowing that you may have forgotten the Apple ID password.
You can request a new password here http://www.apple.com/support/appleid/

How can I remove all photos and directories from iPhoto?

How can I remove all photos and directories from iPhoto as if it was a brand new install?
I am new to iPhoto and was unaware of how it works, honestly I still am a little confused as to when pics I am using 1/2 the time, some from iPhoto and some from MyPics.
Anyhow, I am looking to remove all photos from iPhoto because during the migration of all my photos from PC to MAC, somehow my timeline became messed up and all my photos that have been logged my dates since 1998 are now all messed up.
Although all my year folders are still in tact, IE 1998-2006, the subfolders and like pics are all intertwined somehow.
And when I search iPhoto for a given year, photos from 2,4, 8 yrs back show up in 2006.
Anyhow, I have selected and deleted all photos and folders within iPhoto, and then import the desired photos from MyPics, only to have the photos double up in the library. ( The old ones that should be deleted and the new imports)
I simply don't get it, they fill the trash and disappear when it's emptied, then reappear when iPhoto re-opens!
Can someone help????
I have completely reworked all my photos so that they are all in the correct folders outside of iPhoto, and now I want to import those and only those pics with that file structure.
IE Structure = YEAR > MONTH > DAY ( or if needed) > DAY/EVENT

Do you want to remove the existing full sized image files also? If so then just drag the iPhoto Library folder from the Pictures folder to the Trash and empty it. But be warned you'll lose all of your image files.
You are dragging the files to the iPhoto Trash bin and then using the iPhoto->Empty Trash menu, right?
In copying your photos to myspace and then back the original capture date may not be retained and then either the created date or modified date will be used by iPhoto. If the files in the current library are the originals from your camera then those have the best chance of retaining the correct Captured Date. You can check that out by dragging the Originals folder from your iPhoto Library folder to the desktop and then trash what remains of the iPhoto Library folder. Then launch iPhoto and it will ask you to create an new library. Then import that Originals folder and it's subfolders by dragging it into iPhoto's open window. You'll keep the same rolls that was. The roll dates may change but you can check the captured date of the files by using the calendar in the Source pane.
You won't be able to keep your folder structure within iPhoto. Each outside folder will result in a roll with the same title as the folder. You'll be able to create folders in the Source pane to put albums inside. You can create a smart album to include all photos in a certain date range, line one month.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM, 80G HD, Mac OS X (10.4.7) 22 LCD Display, 200G & 160G FW HDs, Canon S400, i850 & LIDE 50, Epson R200

How I can move my all photos and videos in my mac book pro

How I can move my all photos and videos in my mac book pro

1. Copy photos and videos to a wireless flash drive (see picture below)
2. Download them from flash drive (wirelessly) to iPad

Design Studio : How can I expand all hierarchy at once in dimension filter

Dear Colleagues.
I am currently working on design studio. I need your advises to implement BW hierarchies in my dashboard.
Is it possible to expand all hierarchy in Dimension Filter of Design Studio?
I tried to expand hierarchy in data source api, like 'expandNode' or 'setDrillLevel'.
These functions can be expanded all hierarchy in Cross tab. but it can not be applied to Dimension Filter.
Please help me to achieve this.
Thank you in advance.
Best Regards,
K.Min

I don't see a way to achieve this with the Dimension Filter or the Filter Panel
I think it would be a great idea to add to Idea Place at ideas.sap.com

My windows laptop suffered a serious crash. How can I transfer all music and content from iPhone to iTunes on new windows 8 laptop?

My windows laptop suffered a serious crash. How can I transfer all music and content from iPhone to iTunes on new windows 8 laptop?

See Recover your iTunes library from your iPod or iOS device.
tt2

How can I list all users and their DEFAULT tablespace?

How can I list all users and their DEFAULT tablespace?
Peter

Peter, the following short article that lists the most heavily used Oracle rdbms dictionay views might be of interest based on your question:
How do I find information about a database object: table, index, constraint, view, etc… in Oracle ? http://www.jlcomp.demon.co.uk/faq/object_info.html
HTH -- Mark D Powell --

Can i share all documents and files on my mac book pro and mac desk top using word

can i share all documents and files on my mac book pro and mac desk top using word

Hello, you should be able to if they're running the same version of Word.
When you log into the Desktop for File Sharing from the MBP, use the Desktop's Username & Desktop's Password, & vice versa if logging into the MBP from the Desktop.

I am ordering a new IPad 4 and I now own an Original IPad. Can I transfer all settings and info. direct from old to new?

I am ordering a new IPad 4 and I now own an Original IPad. Can I transfer all settings and info. direct from old to new? How?

Yes, restore the iPad usind a backup file created in iTunes from the iPad 1.

I have and Ipod touch, and new computer. How can i add all purchased and non purchased songs? The old computer with the original library is dead. HELP

I have an ipod touch 3rd generation and a new computer. How can i add all purchased and non purchased songs into the new computers itune library? The old computer is dead! Will not even turn on. Help!!!!!!!! I'm going crazy.

Look into downloading some type of iRip software! Allows you to transfer music from iPod to iTunes.

TS4009 How do I clean up mail in my icloud? I have already deleted old mail on all devices, and emptied the junk & deleted files, but it still shows that I am at max on my icloud. What do I do to free up space? (photos & apps do not take up that much roo

How do I clean up mail in my icloud? I have already deleted old mail (from all my e-mail accounts) on all devices, and emptied the junk & deleted files, but it still shows that I am at max on my icloud. What do I do to free up space? (photos & apps do not take up that much room). When I go to manage storage on any device & it will display how much room each program or app is using, it still shows that my e-mail is taking up the most room. Is there a way to actually log on to the icloud server to manage what it stored there? If so, how do I do it? Also, on a related subject, why does my mail not sync accross all devices? ie. when I delete an email on one device, why do I still see it on all my other devices? How can I change this?
I have an iphone5, ipad2, ipod 4th gen, ipod 3rd gen, all running on my same apple id - but I have a PC not a Mac home computer - is this part of the problem? Looking to upgrade to a Mac sometime this year...
Thank-you for the help!

beckyfromoz wrote:
I do have the Time Capsule and spoke to Apple Care here in Sydney about it yesterday. They told me my mail is not backed up there unless I create a special folder. I just tried ringing them again but Apple Care is closed today...
Mail is backed up automatically. If you make backups automatically, open Mail application and then, open the Time Machine app (in /Applications/Utilities). You will access to the Time Machine interface, and you will be able to see all your mails of all the backups you have, and you will be able to restore them. It means that your mails are backed up onto the Time Capsule

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
       it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
      the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

My mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

my mac disk is full and i cant transfer files from Mac to USB. saying the format is not good, how can i change the format and what happened to the files i have on USB?

Once something similar happened to me. The external drives I had set up for FCP to use for some reason were not mounted, and FCP put all its render files on the main drive and I couldn't find them anywhere.
Go to applications, and control-click (and hold down) on your FCP icon; you should get a pop up menu that says "show package contents". Select that, select the "contents" folder, then the "mac OS" folder. See if your quicktime file is in there, or if you've got render files in the "render" folder or audio render files in the "audio render" folder that don't belong there.
That's where FCP sticks stuff when your documents FCP project folders are not available or when external drives you've selected aren't available.

Can I expand all patterns and effects in an illustrator file at once?

Similar Messages

Maybe you are looking for