Can I export a single sequence xml or project file?

In FCP I can open two projects and drag a sequence from one to the other -- no can do in PPro, far as I can tell. I have a feature with 11 reels, and I need a separate project for each reel. Is it possible to export the sequence only, for import into a new PPro project?

Go the other way around.
Create a new empty Project, then import the selected sequence.

Similar Messages

How can I add links to open xml and csv files stored in another location? Please advice how to place links in my frame maker document?

Hi,
I would like to know as to how can I add links to open xml and csv files stored in another location? Please advice how to place links in my frame maker document?
Kindly advice.
Thanks
Priya

Special > Hypertext > Command "open document" will do its best to open the target document inside FrameMaker, which may not be much help; Special > Hypertext > Command "message …" will use the application you specify. The user guide for 7.0 says this about absolute links, and I don't think anything has changed since:
For example, to start PaintBrush and open the Ship.pcx file on drive C you would use the command message system pbrush.exe C:/Ship.pcx
I've not often used a relative link, and not recently: the same source says
folder levels are separated by a slash / even in Windows and Mac
[relative links] FrameMaker searches for a relative pathname beginning in the folder that contains the current document
[absolute links] FrameMaker searches for an absolute pathname beginning at the top of the file system. In Windows, the absolute pathname begins with the drive specifier, a colon and a slash.

Media Encoder export a different font from the project file

HI
Media Encoder export a different font from the project file when I use a installed font
The problem doesn't occur when exporting directly from Premiere
Any ides why?
Thanks

Hi! This also happened to me quite a few times with different fonts. Your fix worked, thank you. I don't think it's the font since, like I said, it happened with a few fonts, but just in case I was using Mf Young & Beautiful in TTF format.
Are there any side effects to turning off "import sequences natively"?

I can not find clips in HD, only a project file...

In Imovie 5, I can find each individual clips. I am using Imovie 6 now, can not find clips in anywhere only a project file under the Movies directory, can some one tell me please?
Ruru

Hi Ruru
Addressing right forum (iMovie6) would give better answer.
From iMovie 1 to 4 there was a media/project folder. iMovie 5 and 6 stores
Your project in a project icon. Open it by ctrl-click on it and select: Show
package content.
Now You see folder in it and Captured material is in the media folder.
When I tested iM5 and iM6 behaves in the same way. Am I missing something?
Yours Bengt W

How can I export a single track in Soundbooth CS5?

Greetings,
I have built up a single track in Soundbooth composed of several repeated clips. I wish to export this single track.
How can I do this in CS5 Soundbooth?
Thanks,
folsombob

Sorry nobody has answered this. I haven't been in this forum in a couple of weeks.
If you have all the tracks right where you want them, are you able to save the file as an mp3?
Are you looking to export it for web use?
For video tracking?
I'm not sure why you'd want to export it as opposed to saving in one of the many available formats.

Why I can't export a single frame from my composition?

I try to export a single frame from the cavas but motion just did nothing when I click on export. Is there something wrong with my motion setup? I have trashed the motion's plist couple times already but still having the same issue. I can't even save the project. When click on save, motion did nothing, just like export. HELP!

I see that you are on an intel mac. Are you running the universal versions (Final Cut Studio 5.1 w/ Motion 2.1)?
See this article for troubleshooting steps: http://docs.info.apple.com/article.html?artnum=302596.
When I am having major issues like this, I just start over from scratch. Do a complete erase and install with the OS discs, reinstall all applications and update everything with software update. I keep a separate partition just for film and video work that I can blow away any time (I don't store any important files on it).

How can I export a single frame as an image?

Hi, I'd like to take single frames of video and use them in printed material. Its HDCAM, from a Sony EX1, edited on FCP 10.1. How can I export them simply?
Regards
Phil

Place the playhead on the frame you want as a still. Then in share window choose location Save Current Frame. You can then select options such as Jpg, PNG etc.

How can I export an SD 16:9 self contained file from FCX?

Hi folks,
I'm playing with the trial. Used another thread to figure out how to import mts files (Loving the fact I don't have to clipwrap them!
Original footage is in HD - 1920 x 1080. Upon importing it looks like it converts to ProRes422 1440 x 1080 - is that correct?
Regardless, my client doesn't want blu ray. They want DVD and I used BitVice to compress mpeg2s (much better than compressor 3 for quality imho).
Plus, I don't want to pay for compressor 4 or x (whatever it's called).
I've tried Share - Export Media, but can't see any option for outputting to an SD file (720x480 16:9) ?
Thanks in advance for reading and possibly helping me out!
Cheers,
Keebler

Original footage is in HD - 1920 x 1080. Upon importing it looks like it converts to ProRes422 1440 x 1080 - is that correct?
No, that's not correct, but it depends on the exact type of HD media and your import settings.
You can't export to that without compressor 4. You'll have to export a ProRes master and take that to BitVice.

I can not export my Final Cut Pro X Project

Hi everyone
I am seeking help big time!
I have completed my FCP project on FCPX, but I can not export.
When I click on "export project" it does nothing and when I send to compressor or trying to export by using compressor settings or trying to export to media browsers ot apple devices, it says " failed" even before starting to export
All my files at my project are rendered alredy.
I have re-installed FCPX
I have purchased latest version of compressor (4.1)
BTW I am on Mavericxs 10.9.1
What might be the problem?
Any help is much appreciated
Thank you in advance for the help
Regards
Yusuf

I have this same issue also, on my MacBook Pro. When I click 'export project' nothing comes up at all.
It's very frustrating and I have tried everything also:
All files rendered
Re-installed FCPX
The only change i've made since it has started happening was upgrading to Mavericks OS X 10.9.1. So it has to be something to do with that.
I was wondering and hoping if you have since solved the problem, and can help me with a solution to amend it.
If anyone else can help it will be much appreciated, and most thankful.

How can I export the query result into access(*.mdb) file?

Dear all:
I want to export the query result displayed in jsp into excel file
and access file. And I have exported the result into excel format successfully, only one line should be added in the head of Jsp:
<%@ page contentType="application/vnd.ms-excel; charset=gb2312" %>
But how can I export it in access(*.mdb) file? I have replaced "excel"
with "access". But it can't achive my goal.
What should I do to achieve my goal?
Thanks!

The only reason your Excel export works is that Excel knows how to interpret comma separated values as an input file format. Access has no such beast.
If you absolutely must provide info in an mdb, one solution would be to create an ODBC datasource pointing to an empty mdb, then push data into it using the jdbc:odbc bridge, then make a copy of the file and stream it down to the browser. You may run into some ugly file locking items here - set the ODBC connection so it is not shared, and that might help.
This one is going to be ugly.
I suppose another approach would be to write a simple VB applicatin that uses automation to create an MDB, then stream that file down to the browser from your servlet. That would almost certainly be faster than the ODBC approach.
- K

How do I move just a single clip in the project file and then convert that into an Mp4 format?

Dear Assistance,
I have a project file open.
At the bottom of the screen there is a horizontal film strip of images. I have cut the images into certain segments.
I want to select one single segment (about 1 min long) and convert only that selected segment into a mp4 format?
Kindly inform me how the best way to go about doing that is.
Thank you,
Ben
[email protected]

In the sequence you will see the time code and a bar in line with it.
At the end of all your edited clips in the sequence you will find that the bar ends, this bar defines the work area.
Drag each end of the work area bar so it covers only the clip you want to export.
The select the exporter and select the preset you want and before you start the export where it says whole sequence change this to work area
Then change the default name and location to whatever you want and start the export, job done

Exporting the Browse Sequence XML file for Use in Another Project

When I generate a browse sequence based on the TOC using zero for the book level, instead of getting A, A1, A2, B, B1, B2, I get A, B, A1, A2, B1, B2. The TOC runs through all 1st level items first, cycles back through all 2nd level item, then 3rd level, etc.
My workaround was to auto-create the browse sequence at a 0 level and then manually manipulate it to output according to how my readers would actually read my online book (ie A Aa A1 A1a A1b A2 A2a A2b B B1 etc etc).
Now that I have my browse sequence in the correct order for this project, I do not want to repeat these steps every time I create a new version of my OLH for the same guide after some minor updates have been made to the FM source.
There is a file named whbrs.xml inside the output folder and it contains the browse sequence order I specified during my workaround steps.
Is it possible to export this file to another location for use in another project referencing the same guide?
This methodology is much preferred as I am working at an enterprise level with multiple documents (some numbering in the hundreds of pages) and do not want to have to manually use my workaround for each project I update over the next few years.

Hi Kristopher
You probably wouldn't want to use that particular file as it's an output file. You would likely have better luck using the ProjectName.BRS file as that one should be a source file.
However, keep in mind that whether (or how well) this will work will entirely depend on having the recipient project using the same identical structure and identical file names.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Can't export clips or sequences to Audition from Premiere Pro cc 2014.2

I can't get audio tracks or anything to export to audition. If I right click on them the option is grayed out and if I go to the clip menu and select "edit in adobe audition" the "clip" is grayed out and if I choose sequence it opens a dialog box that will not let me click the box "open in adobe audition".
I am watching a how to video but my program will not function as shown in video.

I uninstalled Audition and reinstalled it. I read that it should be installed after premier pro cc. That restored the grayed out links. good, but now other problem.
Now the new issue is the export to premiere from Audition is greyed out.
I will try and get this make sense...
I installed premiere cs6 two days ago to get Encore for dvd burning and menus. After the uninstall/reinstall of audition just now I ran a check on the link and got stuff from premiere cc 2014 to launch into audition, but when I checked how to send it back to premiere pro cc 2014 when I went to export to premiere (and was able to check the open in Premiere box) it launched cs6, but I want it to go to my premiere cc 2014
So I uninstalled cs6 only leaving encore, now the box to send it to premiere is unable to be checked.
I tried another fresh install of audition, but the box is still unable to be checked.
I need help - been up all night and having a rough time here.

Can you export a single photo album from Iphone 4 to your computer

I created a photo album of vacation photos and would like to export that specific album to my computer. Can that be done or do I have to create a new folder in my computer and sort through the entire camera roll download again?

You can only import photos from your camera roll.

Can I export a single file into multiple files?

Is there an option or a plugin that would allow me to set markers in the audio, and then have Soundbooth export the audio into multiple files?
As an example, let's say I have a 1 minute audio file. I place a marker at 0:00 and another marker at 0:10 and a third marker at 0:30. I then would select Export Multiple and I would end up with three seperate wav files, one 10 seconds long, the second 20 seconds long and the last one 30 seconds long.
Thanks

Hi laforcej
Open the PDF In Acrobat ...
Go to Tools -> Pages -> Extract
Now Select the Page Number you Want to Extract and Save them

Can I export a single sequence xml or project file?

Similar Messages

Maybe you are looking for