Can I export an .mp4 file created by Adobe Premiere Pro CS4 to tape using alternative software?

I am editng with Premiere Pro CS4 on a Windows XP system. I attempt to disable all startup and background software . When i export a one hour completed project to tape, I invariably get at least one glitch (momentary stop) on the resulting tape. Is there an alternate program I can use to export to tape an .mp4 file created by CS4?

Could be wrong, but as far as I know the only way to "export" to tape is to PLAY the timeline while the camera is connected via Firewire and in record mode

Similar Messages

Export multichannel mp4/h.264 with Adobe Premiere Pro CC

Dear community,
we currently test the Adobe Premiere Pro CC trial (German) on a Windows 7 Professional PC.
However, we are not succentful in exporting a multichannel mp4/H.264 clip.
We haven't found an answer on our issue so far, so I hope that this question was not answered several times before in this forum.
If we chosse the H.264 exporter, we cannot select a multichannel audio export (only mono, stereo, 5.1).
In contrary, if we select the Quicktime exporter, we are able to export our sequence with a 4 channel audio master with 4 mono tracks, but we can only export it with a DVCPro Codec in a mov container.
If we try to select a HD H.264 preset we get an error alert stating that the preset contains a not compatible video codec.
What are we doing wrong?
Thanks for every suggestion.
Thanks in advance
André

Thanks for your thoughts, Richard.
Your are right, we currentky use the Adobe Premiere Creative Cloud version.
We managed it to solve at least the error message. It was caused because Quicktime was not installed together with the Adobe Premiere Pro / AME setup on our computer.
After we installed Quicktime 7 manually, we can select a Quicktime/H.264 preset without any problems within the exporter settings.
However, the Quicktime/H.264 export dialog seems to only allow a mono or stereo audio export. No multichannel-audio export.
This possibility is only displayed in Richards case, if we select the Quicktime exporter and an Uncompressed Video or DV preset.
Our question to the Adobe developer guys is the reason behind this limition? Other video authoring prograns can export a mp4 with H.264 Codec with multichannel AAC without any problems.
How can we do this with Adobe Premiere Pro (not necessarily via Quicktime)?
André

Adobe Premiere Pro CC not opening an xml file created in Adobe Premiere Pro CC 2014

Hello,
I had created a project using Adobe Premiere CC 2014 which had some minor changes, which were going to be done by my boss, who uses Premiere Pro CC. However the project file of Adobe Premiere CC 2014 was not getting opened in Premiere Pro CC giving a message of type that as this file was created in a newer version of Premiere, it cannot be opened. After searching on this forum I found that we have to convert the Premiere Pro CC 2014 project file to XML file which can be then imported onto Premiere CC. So I created a XML file by selecting File-> Export -> Final Cut Pro XML and sent it to my boss. However even the xml file is not getting opened after being imported onto Premiere Pro CC giving an error of sorts, Cannot open the file since there is a problem with the codecs.
Have I done something wrong? Please guide me since I am a beginner to the Adobe environment and would very much appreciate any help.
Thank you.

Indeed..... but are they fully documented, includuing Adobe's implementation of Multicam?
Collapsing them should really be no more than a day or two of work for an Adobe engineer and a day of beta testing. Seriously. Lots of people want this - it only takes a few minutes with google to find people struggling with this exact problem. Premiere Pro Multicam --> Resolve.
Since we do a lot of multicam work it's something that's important to us.
Lots of other people never go near multicam, so I guess for them it's something they really don't care about.
I currently have > 22 hours of multicam sequences that need primary colour correction and follow on grading..... resolve would be the best choice by far.

No sound in LS and RS speakers in 5.1 mix created in adobe premiere pro cs4

Hi ,
Please help!!
I mixed 5.1 sequence in adobe premiere cs4 with six channels in the order of L R LS RS C LFE and I encoded it using audacity/ wavto ac3 convertor and produced an ac3 file. I played the file in home theatre and there is nothing coming in LS and RS speakers. The audio that I have mapped into these channels ( LS and RS ) plays in the R and L speakers.. and I also tested the file in adobe premiere cs4 .. The 5.1 ac3 file plays in a sequence ( L,R, LS, RS, C, LFE ) instead of playing the audio in the correct sequence of ac3 ( L, R, C, LFE, LS, RS).. Did I go wrong somewhere .. Pls help.. need to finish a project by Tuesday..
Thanks in advance

I'd recommend using a properly licensed Dolby encoder, instead of the illegal one you have used. (Problems like this is why Dolby requires a license from software companies to include their encoder, so things work the way they should.)
Yes, that means you need to spend money.

Can I import I-life files into Adobe Premiere Pro CS4?

Okay, so not exactly an Apple question, but there are so many smart, helpful people on here, and the Adobe forum doesn' t seem very active.
I recently got Adobe Premiere Pro CS4 (the movie editing software). I tried to import files from I-photo, but those folders wouldn't even open. Tried to import files from the movie folder, which were in .mpg format, but got a message that it is an incompatible format.
Those were just simple movie files taken with a small digital camera. Does anyone know how I could use this footage in Adobe Pro? I have access to other Adobe software as well, perhaps there is a way to convert the files? If I try to import something to Adobe from I-movie, should that work? Or from I-DVD? Also, is it possible, with Adobe or regular Mac software, to import regular DVD footage (that is not in form of a computer file, but just something that plays in your DVD player) or perhaps convert it into a computer file? I have some old VHS footage that was copied onto a DVD and would like to edit it, or at least have it on my computer as a file.
Also, if I can't use those files, are there any places on the internet where one can download some simple footage to try out in Adobe? I'm new to it, so I'm just trying to get some files together so I can try out how it works.
Lastly, if anyone knows of a good online tutorual for CS4. It's an older version, and on the Adobe site they only have tutorials for the newer one.
Thanks!

This is a forum. None of the users here -at least not to my knowledge - are Adobe professional
Ninety-nine point nine percent correct. We are blessed with a few Adobe employees here, unlike some fora, but those folk are probably at NAB right now. Also, they are in other departments, so would have to walk "down the hall," or make a call, just as we would.
When it gets to issues on licensing, installation, etc., we're pretty much at a loss. Most of us have never encountered such issues, and only know what we have read in others' threads, when they have bothered to report back. Even then, that is third-hand info.
Last time that I had an Adobe installation issue was AI 3, IIRC. My upgrade version did not have the old database of S/N's. Mine was 00-000-003, and things had changed drastically. One call to Adobe, and a total time of about 5 mins. (including hold time), and I was given a number to plug in, and then everything installed perfectly. That was in about 1989, so is not quite contemporary. Still, that is the last and only first-person account that I can offer. Most here have zero personal experiences, as they came to the party later, and have just not had any such issues.
We'd love to help, but just do not have the experience.
Good luck,
Hunt

I can only export in flash player, flash professional, and premiere pro

Hi,
I just got the CS5 production DVD's. I only installed AE on my macbook pro osx 10.6.8.
When I go to export my project/composition I only have 3 options, i can only export in flash player, flash professional, and premiere pro.
Where are the options to export as a quicktime movie and all the others?
Do I have to install the entire suite for these options to appear?
If so, why?
Thanks,
Jason

Render Queue.
More importantly, for the newly initiated, some time spent here would go a long way.

My Adobe Premiere Pro CS4 wont export properley.

Im running Adobe Premiere Pro CS4 on my Windows Vista & everytime I try to export my video something goes wrong. When I go to export, it opens Adobe Media Encoder & starts encoding it, but most of the time it will jus stop encoding. Even the elapsed time stops ticking. & I know it isnt the program freezeing up because I can still click the icons and even cancel or add new files, and it isnt just running slow because ive left it for 4 hours and it made no progress at all. A few times it has finished but the video gets screwed up. Like once a certain effect didnt show up, & both times the clips got screwed up & jus flashed green & repeated with the audio stillplaying fine. The only thing I can think of is it's the fact that Im running Vista or that the video has 117 items imported. Please help, Im at wit's end.

Alright, my computer is a Windows Vista. My processor is AMD athlon(tm) Dual Core Processor 4450e 2.30 GHz. I have 3 Gigs of memory (RAM), and it's a 32-bit Operating System. I have 2 harddrive Disks, the C drive (85.6 GB free of 112 GB) and a "FACTORY_IMAGE (D:)" with 1.53 GB free of 11.2 GB, but I think the D drive is just for recoverey, it came built in with the computer. My virtual memorey says it's saving on the C drive and has "Total paging file size for all drives: 3241 MB". I close all other programs besides Adobe Premire Pro CS4, and Adobe Media Encoder when encodeing. Ive also tried running just Media ENcoder with same results.
The video files I have uploaded are .MP4 and .FLV. Ive uploaded MP3 files for some of the sound clips and PNG for some still images. Like I said before I have 117 imported files. Also my video is 7 minutes and 44 seconds long.
Now my problem has never accoured in the same place in the video. It seems to be spontanious. For example I tryed to export it the first time and it encontered an "Unknown Error" this was at a minute and a half of encoding the video. Then the second time I tryed to encode it it worked all the way through, but when I went to play the file it played just fine up until a point. then a series of clips began to flicker and play the wrong clips, some times from a scene that happened just previously to the clip before and also flash green. The audio stayed the same though. After the clip finished and another clip began to play it worked fine. Then I tryed to encode it a third time and this time it simply stopped encoding. Like I mentioned earlier the program or my computer never froze it just stopped encoding and the timer stopped. This happened a few more times before it finished encoding it again, but the same problem happened with the skipping, playing the wrong clip and flashing green while the video progressed, but this time it happened at a compltetly different part. For exaple the first time it happened about 2 minutes into the movie and the second time it happened about 5 minutes intot he movie.
When while I was making the video randomly the flickering of wrong clips and green flashing accourded when I would played a scene, now by just restaring premiere the problem would go away and the scene would play just fine. But this only happened in editing maybe 3 times. Unlike when I was encoding where it happens everytime the program finishes.
I hope this was enough info, if Ive missed anything please tell me.

Adobe Premiere Pro CS4 Cannot Export to Encoder Cannot find Updates

I am trying to export my movie from Adobe Premiere Pro CS4, I get a window that reads: An Adobe Media Endocer update is available for this version of Premiere Prol To download the latest update, please run the Adobe Updater from the Help menu or visit htt://www.adobe.com/downloads/updates. When I go help menu and select updates, It only comes back with the Adobe Reader 9 update. When I visit http://www.adobe.com/downloades/updates I cannot find the update anywhere, all updates seem to be for CS5.
Everytime I have used this program in the past the Encoder programs opens automatically when I export from Premiere Pro. But not anymore.
When I open Encoder then open Premiere Pro and export my movie, It loads into Encoder but I get these two error readings. Microsoft Visual C++ Runtime Library, Assertion Failed! Program:... File:..\GUI\Editor.cpp, Line: 391, Expression: false, For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts (Press Retry to debug the application - JIT must be enabled
When I select retry, I get another window that reads: PProHeadless.exe has stopped working, A problem caused the program to stop working correctly, Windows will close the program and notify yoou if a solution is available.

What Adobe products do you have installed? Production Premium or ?
What you did puts the file into the ame queue, but does not actually export it.
Can you open ame? Start -> Programs -> [adobe program group] -> Adobe Media Encoder

Adobe Premiere Pro CS4 4.1.0 update not working!files wrong size too?

when i go to download Adobe Premiere Pro CS4 4.1.0 update it says that file size is 30.5MB but when it starts downloading it it says thats the file size is 110mb and once installed it wont let me import VOB files. Has anyone got a solution?
Thanks

Other users have reported having trouble with VOB files from DVD recorders. Properly authored DVDs work.
Where did you get the VOB files that won't work for you?
-Jeff

How can I download the trial version of Adobe Premiere Pro CS4

Can anybody tell me how can I download Adobe premiere Pro CS4 trial version for windows 7 English.

This is a forum. None of the users here -at least not to my knowledge - are Adobe professional
Ninety-nine point nine percent correct. We are blessed with a few Adobe employees here, unlike some fora, but those folk are probably at NAB right now. Also, they are in other departments, so would have to walk "down the hall," or make a call, just as we would.
When it gets to issues on licensing, installation, etc., we're pretty much at a loss. Most of us have never encountered such issues, and only know what we have read in others' threads, when they have bothered to report back. Even then, that is third-hand info.
Last time that I had an Adobe installation issue was AI 3, IIRC. My upgrade version did not have the old database of S/N's. Mine was 00-000-003, and things had changed drastically. One call to Adobe, and a total time of about 5 mins. (including hold time), and I was given a number to plug in, and then everything installed perfectly. That was in about 1989, so is not quite contemporary. Still, that is the last and only first-person account that I can offer. Most here have zero personal experiences, as they came to the party later, and have just not had any such issues.
We'd love to help, but just do not have the experience.
Good luck,
Hunt

Where can I download a trial for Adobe Premiere Pro CS4 Middle East version

Hello
I'm using Adobe Premiere Pro CS4
Now I am working with new project which requires me to add some titles in Arabic (I mean from right-to-left direction)
Please how can I do so?
Does it requires me to get a new copy for middle east? or I can do it with some how using my current version?
Please consider it important and needed.

I do not mean the interface or anything a like.
But I only mean to suport or enabling titles written in Arabic language like this (بسم الله الرحمن الرحيم)
We do have Adobe Photoshop CS4 ME (not mine but my company has it and it support adding Arabic as I've mentioned above)
So I was looking for to see Adobe Premiere have the same thing.
Thanks,
I'll add the feature request as you recommended.

Where can I download and install Adobe Premiere Pro CS4

Hi
I would like to know where can I download and install Adobe Premiere Pro CS4. Would you send me the link install imm please??
Thanks

Check this link , it may help
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
Please do read the instruction properly , do avoid the error "Access Denied"

Why can't I open PDF files created in Adobe X using Adobe XI? How do I fix this?

Why can't I open PDF files created using Adobe X in Adobe XI?

I try and open them in Reader (double left click on the file) and all I get is a single screen with two overlapping frames neither of which have anything to do with the subject although the presentation title is at the top. One of the frames had "Adobemail.com" on it. Our work computers were recently up-graded to Adobe XI and this was the first time I tried to open a presentation that has worked fine in the past. I would have thought that Adobe XI would have been backward compatible, but it doesn't seem so. Any help would be greatly appreciated as I have an 08:00 First-Aid class tomorrow and need this presentation. Apparently Adobe forums are off-line for up-grades. Thanks
[private data removed]

Exporting FLV With Cue Points In Adobe Premiere Pro CS5

Hello
I am currently using Adobe Premiere Pro CS5 to export to a FLV file with flash cue points. I have managed to do this but I also want to export (separately) a list of all the time codes of the cue points in the clip. I see that you can save the cue points to an xml file but it doesn't come up with the time codes (well it does, but it is in milliseconds and amongst other things). Is there any way I can save a list of the time codes of the cue points on my FLV file, rather than having to manually type it out?
Thanks,
Rvnistelrooy

I don't think there is any easy way to do this, but one thing I could suggest is to export the metadata as an xml side car and then use the text editor to extract the times. I'm not sure this would work, but it's worth a try.
Cheers,
Dennis

Adobe Premiere Pro CS4 - Export issue.

Hello to the Adobe Community!
Maybe someone here can help me out with some Premiere issues.
I am using Premiere Pro CS4 4.2.1.
I'm on Windows 7 64 (Ultimate N).
My system is:
Intel Core i5CPU [email protected]
3GB RAM
I have updated all Adobe software, and my drivers.
I've had a good look over the forums and I found this article. It's very useful, and hoping it would be my saviour, I went through all the advice given.
Still no luck!
I'm trying to export the media from Premiere to Media Encoder.
My sequence settings are:
1280 x 720
Square pixel aspect ratio
25fps
48000HZ - Stereo
My render settings are:
MPEG2 - DVD
PAL HIGH QUALITY
Everything else is left to the default setting.
When I try to encode via the Media Encoder, it gets to about 1/3rd of the way through and I get a message:
'Encoding Failed
Error compiling movie.
Unknown error.
I have also tried, as per previous posts, to use the Adobe Dynamic Link, both from Premiere out to Encore, and importing in from Premiere when I'm in Encore.
Still no luck! I get an 'encode failed' message when I try to transcode it. I'm pulling out my hair with this one.
Can anyone shed any light on this?
NB: This is my first post on this forum, so apologies if I have missed anything out.
Thanks in advance for any advice,
Em.

Thanks everyone for your help and suggestions - Evan I think you might be right on the memory issue.
I tried one last thing - running Premiere in compatibility mode as an administrator.
Again, it failed after about 7 minutes. It's quite a complicated project, but it's only 14 minutes long.
The strange thing is that although it doesn't seem to render on my work pc, it renders on my home pc, which has similar specs:
CPU: Intel Core i5 760 2.8GHZ 8MB
MEMORY: 4GB (2x2GB) PC12800 DDR3/1600mhz Dual Channel Memory
MOTHERBOARD: Asus P7P55-M Intel P55 Chipset
NVIDIA GeForce GTS 450 1GB
I forgot to say that my work pc, listed above uses an NVIDIA GeForce 8800 GT card.
Do you think that 1GB can really make all the difference?
Sorry if that's a stupid question, I don't have a massive amount of technical knowledge.
Cheers!
Em.

Can I export an .mp4 file created by Adobe Premiere Pro CS4 to tape using alternative software?

Similar Messages

Maybe you are looking for