Can I export my Soundtrack Pro audio files, including the video?

I'm new to soundtrack pro 2, could I export my audio files including the video?
I tried, but all i get was audio...
thanks!

Export -> Master Mix - choose the File Type -> *Using Compressor*, this will give you options for re-encoding or preserving the video file.

Similar Messages

No Video when using the "Send To Soundtrack Pro Audio File" Command

Hello FCP Users,
After reading and rereading the FCP and STP manuals and scouring the boards; I still can not figure out how to view my video clip while I'm editing/sweetening audio in STP. I have even used the DVD tutorial in an attempt to figure it out (all works fine and good with the tutorial example), but I'm stuck here the real world.
I'm thinking their must be some preference setting somewhere in STP that I've missed. Any suggestions would be greatly appreciated!!!
Best regards,
Jeff
From the Manual:
Soundtrack Pro creates a new audio file project (with the file type .stap) for the clip. The clip can contain video and audio or contain only audio.
In the Final Cut Pro Timeline, Control-click the clip, then choose “Send To >
Soundtrack Pro Audio File Project” from the shortcut menu."
Mac Pro, dual core, 3GHz, 8GB Ram Mac OS X (10.4.9)

Rob,
The audio consists of two separate audio tracks A1 is from a lav mic and A2 is from an on-camera mic.
It was captured DV.
If I rt click the video clip in the "video tl" the "Send To Soundtrack Pro Audio File" in the dialog box is grayed out/not available for selection, but the Send To Soundtrack Pro Multitrack Program is available to select.
If I choose to Send To Soundtrack Pro Multitrack Program I get the following an error message: Error sending selection to Soundtrack Pro.
I've tried de-selecting the "linked selection" in the tl and rt click the audio clip in the "audio tl" and that allows me to "Send To Soundtrack Pro Audio File" , but no video in the utility window of STP.
If I select the "linked selection" in the tl and rt click the audio clip in the "audio tl" the "Send To Soundtrack Pro Audio File" in the dialog box is grayed out/not available for selection, but the Send To Soundtrack Pro Multitrack Program is available to select.
If I choose to Send To Soundtrack Pro Multitrack Program I get the following an error message: Error sending selection to Soundtrack Pro.
It looked all so simple in the tutorial. I'm going on five hours of trying to find an answer to this issue any other suggestions before I slit my wrists? Thanks for your input.
Jeff
Mac Pro, dual core, 3GHz, 8GB Ram Mac OS X (10.4.8)

Cannot use the Send to Soundtrack Pro Audio File Command

I cannot use the Send to Soundtrack Pro Audio File Command, only the Multitrack and it's starting to really get on my nerves. It is unhiglighted. If I unlink the clip and select only half of the audio, the option re-appears. I have no idea what is wrong.

As an audio file, you can only send one clip at a time. This is a feature, not a bug. See the book for more information.
Russ

Unable to "Send to: Soundtrack Pro Audio File Project"

With a solo clip in its own sequence, I wanted to do some audio work in Soundtrack Pro. I control-clicked on the clip and selected "Send to." The option for Soundtrack Pro Audio File Project is grayed out, not allowing me to select it.
Any suggestions?

I figured out you can only do "one track" at a time and not multiple tracks. Once I Option clicked on the single track, it came back. Just FYI.

How to export all tracks into audio files with the same duration

Hi everybody.
I am trying to export all the tracks into different audio files.
It's 10 soft. instruments and an audio track. I tried with "File>Export>All Tracks as Audio File but the result is 11 audio files with different lengths. As the song is 3 minutes and 20 seconds I would like every single track to be 3.22 sec long.
How do I do it? In fact, each track is composed not only by played instruments but also by moments of silence.
Thanks!!
Alessandro

sambino wrote:
I tried with "File>Export>All Tracks as Audio File but the result is 11 audio files with different lengths. As the song is 3 minutes and 20 seconds I would like every single track to be 3.22 sec long.
The files are different lengths because each instrument does not stop playing at the same moment. It would accomplish nothing other than waste disk space if Logic appended silence to the end of each file in order to make each track the same length. The different lengths you see mean nothing because the absence of appended silence means nothing.
each track is composed not only by played instruments but also by moments of silence.
Naturally. And that silence is accounted for in your exported files, when the silence appears at the beginning of the track, and when it appears during the track. It just isn't appended at the end because that would be pointless. Consider this project, consisting of four tracks:
When I use the command File > Export > All Tracks as Audio Files, Logic will produce four files that look like this:
The files are not equal in length, which is perfectly fine. What's important is that they all start at bar 1, and will align properly when imported into some other program. So all you need is the command you already used: File > Export > All Tracks as Audio Files. In one step, it will produce all the files you need, and it will produce them correctly.
By using Bounce, you would be gaining nothing except extra work, because you would have to do it separately for each file you wanted to produce. With Export > All Tracks as Audio Files, you get all your files with just one command.
iSchwartz wrote:
exporting tracks means that any panning or automation will not be rendered. So if you want the engineer to put up all of your tracks at unity gain (all faders at zero) and have your tracks & stems reproduce the mix you're hearing at your studio, use bounce, not export.
If you want to have your tracks & stems reproduce the mix you're hearing at your studio, there's no need to go to the extra effort of using Bounce instead of Export. You only need to enable (in the Export dialog) the checkbox "Include Volume/Pan Automation." This is explained on p. 1022. When you do this, any panning or automation will indeed be rendered.

Soundtrack pro audio files with software

Im missing sound audio files. When I follow along with the lessons in Lynda.com the teacher shows something like 5011 files for audio and I have 2500. I did it step by step as he show to reset everything and still it finds only 2500 of the audio files. Im missing the audio files that the lesson is loading up for the lesson. Anyone know why I am missing the files? Where can I get the rest of them? Im missing all the audio files that start with the lettter A under instruments and bass loop. I have 78 and the lesson shows 306 I think. Thanks in advance.

Make sure you are indexing all of your Apple Loops folders. Do a spotlight search on Apple loops, and sort by type, to see the folders.
My main Apple Loops folder is in Library/Audio/Apple Loops/Apple/Apple Loops for Soundtrack Pro, but I also have others for GB (some dupes) and others I have purchased in other folders.
Click Setup... to see your directories, then the + to add a directory, or select a directory and click Index now to re-index it.
If all of that fails, I think all of the loop content is on the install disks, but I don't know a way to get it without completely reinstalling.
OH, BTW, you're using the same version of STP as the Lynda.com tutorial, yes?

From FCP timeline...send to soundtrack pro audio file project is greyed out

The send to multi track is not greyed out but that's not what I need.
The stereo audio file is 48KHz and I have 7 tracks of audio in the sequence all of which are stereo except the VO track.
If I use "open in editor" to open a stereo file from the timeline soundtrack only imports one channel.
I'm trying to run these stero audio clips through STP using the waveform editor to quickly analyze and fix the "clicks and pops" also adding a low cut off filter to some of the clips to help eliminate some wind noise.
Seems the only way I can get it to work is to export each clip as an aiff file and then import it to STP, edit non destructively, save as a .stap file and then reimport that .stap file back into FCP........
Any ideas why the "send to STP audio file project" is greyed out? perhaps I have forgotten a preference setting somewhere?
All help appreciated.
Thanks,
Dave
G5 dual 2.0, 3.0 GB ram, 2x250 internal Mac OS X (10.3.9) FCP 5.0.4 DVDSP 4.0.3 Motion 2.0.1 Soundtrack pro 1.0.3 QT 7.0.4

Hey, Dave. That can happen if you captured your files with two audio tracks instead of a single stereo track. The two channels will show up on two tracks, but they're not actually stereo in the quicktime file.
When you captured, did you click the "OO" button next to the audio channels to link them to stereo? You can look at the contents of the quicktime file with Quicktime Player and see if you've got one audio track with two channels assigned to "left" and "right". If you have some other configuration in the file, check out these old threads for workarounds, or recapture if that's an option.
http://discussions.apple.com/message.jspa?messageID=1456638
http://discussions.apple.com/thread.jspa?threadID=259929

Urgent: Can't export to SoundTrack Pro

This is really driving me crazy. Until 2 days ago, FCP and Soundtrack Pro were working together seamlessly.
Now, when I go to "Send" a sequence to Soundtrack, everything seems to be going fine, the progress bar is cranking, but when it hits 100% it tells me there was an error exporting to SoundtrackPro. The error window doesn't give any details.
This happens EVERY time. Whether I am exporting an Audio File Project or a MultiTrack Project.
Any help would be GREATLY appreciated. Thanks!

Hi,
I was wondering; did you ever solve your problem ? By trashing FCP preference and cash files for instance. Perhaps your problems started to occur after an automatic software update and you can relate it to that moment ? (You're on 10.4.4 right ?)
10.4.4 and the latest software updates have caused me nothing but problems and stange behaviour so far and believe me, I'm know a "little bit" about Apple software and solving problems. I think we might have to wait 'till 10.4.5. + Pro Application support 3.2 to get everything and running again
Nevertheless, I hope you've already got your SoundTrack up-and-running again, Cheers JFP

Can't export with builds on audio files

I have a bar graph and I want the bars to build in on click. I then want an audio clip to automatically come on thereafter. I thought I needed a build in for the audio, set to come on after the build in for the bar. When I play the slideshow it all works fine, yet when I try to export to iDVD it stops working at the audio build in every time. Is there a build in other than appear I should be using? Is there something I have overlooked? thanks

Hi
Go to Logic Pro X:Preferences:Advanced Tools
Turn ALL of them on
CCT

How can I disable a PCI or USB device (including the video card)?

Hi
I'd like to save some power and reduce the heat of my fanless barebone (an atom-based arctic mc001, see here;
http://www.amazon.fr/gp/product/B005DL6 … 5DL6V8G%22
It consumes 25W idle, and gets a bit hot.
So I'd like to disable some of the devices I don't use.
For instance:
- the internal wifi dongle (appears in lsusb)
- the internal TNT tuner (appears in lsusb)
- the internal DVD drive
- the internal radeon graphic card
For all of these devices, I do a "echo 1 > unbind" in sysfs, for the correct devices.
After that, all these devices seem 'disconnected' IE they no t not appear anymore in lsusb or lspci (for the radeon)
I also put the USB ports in 'auto' power mode
After that, the devices do not generate any IRQs or wakeups anymore, according to powertop...
But the power consumption does not decrease a lot... less that 1W...
So I wonder if the fact to unbind the devices really disconnects them or not.
Especially for the radeon... shouldn't I underclock it as much as possible instead? If so, how?
Thanks for your help.
Eric

I can't really help you much but to give you a warning. underclocking/undervolting too much can damage a video card without your knowledge, if your going to underclock it make sure you do stabilty tests. Your also gonna need it for any graphics environment you may want if your processor doesn't have one, unless your going command line only. you can try seeing if disabling it with rf-kill does anything. you can also use iwconfig to turn on power saving on your wifi-card, and try adjusting your cpu scaling as well. logically I would'nt worry about the dvd if heat is our concern a dvd drive in standby is proably not going to be throwing off a lot of heat or use very much power.. the big players are probably going to be your cpu, gpu and maybe that wifi card I know when mine is in use it just drains the battery with out power-saving. as for the tuner I have no idea. I hope this post can give you some ideas and maybe move you in the right direction. I can't garentee that all of this is accurate, some of it is logical assumptions. just trying to throw out some ideas to help a fellow arch -linuxer

Can't export to Soundtrack

Hi, thanks for any help with this.
I am running FCP 5.0.2 and Soundtrack 1.2.
I was just watching the Quick Tour video on the Apple site for some of the features of Soundtrack. On the video for "Noise Reduction" they showed how you can Control (right) Click your audio clip in FCP and select "Send To" > "Soundtrack Pro Audio File Project" where you can then make corrections to the audio and it's updated in FCP. When I highlight the audio clip in question and right click it and choose "Send To", my option for "Soundtrack Pro Audio File Project" is faded and I can't click it. My only options are the two below that, which were not used in the video.
Is my version of FCP not compatible with my version of Soundtrack? I also tried exporting the audio clip as an AIF and then importing that into Soundtrack but when I open Soundtrack and attempt to import the AIF file it is faded as well and I can't open it.
I have a lot of audio clips to clean up for a video project and I thought this would be easy. It's rarely as easy as in the demo videos but if anyone can think of something I can do please let me know.
Thanks again.

You'll need Sountrack "Pro" for that

Soundtrack Pro crashed. Now can't open or create new audio files.

I was editing an audio file in Soundtrack Pro v1.1. I also had Flash, Parallels and a few other applications open. I plugged in my USB headset. Parallels crashed. Then Soundtrack Pro hung up. Then I had a complete system crash and needed to restart. After restarting I can no longer open Soundtrack Pro files or create new files. All other applications including Final Cut Pro seem to be working fine. I tried reinstalling Soundtrack Pro, but that didn't help. I don't get passed the Soundtrack Pro spash page. I can select menu items such as preferences, help, and even new. However, when I select create new file nothing happens. Any suggestions would be greatly appreciated.

I deleted the preferences file (soundtrack.plist), then restarted the application. That didn't work.

Exporting from FCP to Soundtrack Pro looses files!!!

I'm working on a project shot on an f900 HD camera with the tapes downconverted to HD-DVCPro to quicktimes. I sb-clipped the QT and I re-synced the audio with the .wav tracks recorded on set. My sequence is set up for a .wav project. I've exported a sequence from FCP by using both Send to Soundtrack Pro and exporting to Soundtrack pro. In both cases I received an error and when I went back to FCP some of my clips were gone. They weren't in the trash or in the Capture folder> I did a search for the file names and they had vanished, or had been renamed. Anyone had this problem before? Should I dump the STP then re-install it? I'll look at Apple support page. Is there a problem between the .wav and aiff? Can Soundtrack Pro bring in .wav or is it only aiff?

Welcome To  Discussions justjewell!
As a Host has relocated your Topic to a more appropriate Forum, it is not necessary for you to repost elsewhere, at this time.
But for future reference, please review the first entry How To Post A New Topic, on Feedback About Discussions.
That is the Forum where you erroneously posted your issue.
ali b

How to "Export All Tracks as Audio Files" in Pro Tools?

I have a Pro Tools session that I want to mix in Logic. So I need to bounce all tracks as audio files like Logic's "Export All Tracks as Audio Files" command. Does anyone know if this is possible in PT, or do I need to bounce one track at a time (in realtime!)?

Sorry, but the previous answers are not quite correct. Consolidate tracks will only merge all your edits and fades and make a new audio file out of it. It wont consolidate any automation or insert effects. The same is true for exporting audio from the regions pane. Therefore you still have to perform a "bounce to disk" in order to consolidate properly. So no it doesn't have the "Export All Tracks as Audio Files" option......
Christian,
When "exporting" from one DAW to another, it's generally understood that automation and plug-ins will not be included.
Exporting from Pro Tools does indeed bounce the files to disk. We aren't talking about a stereo mix here. We're talking about exporting all the individual tracks. Are have I misunderstood you?
.... which leads me on to this question. How long has logic had the "Export All..." function as I have been performing "track lays" (i.e. getting my logic stuff ready for a pro-tools mix) for films that can often take days to perform and am embarrassed to stumble across this option on this forum as I fear I may have cost myself several weeks of my life working the long way round!!!
"Export All tracks as Audio Files" was introduced in version 7.0.
Don't feel too ashamed though. I have a good friend, who has been using Logic daily as long as I have (8 years or so now), who only 3 months ago, saw me utilizing that feature, and his jaw dropped. He too, had been wasting "weeks" of his life, doing it the way you have been doing it. : )
You're gonna absolutely LOVE using that feature from this day forward...!

Hi I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

What device?
What format?
How are you importing it?
Can you find the external audio with Finder?
Where is your destination file when you import it?
Andy

Can I export my Soundtrack Pro audio files, including the video?

Similar Messages

Maybe you are looking for