Can I export to tape with 4 audio channels

I am editing a short piece in PP CS3 for a TV station who require delivery by tape (I'm proposing to use mini-DVCAM). Part of their audio requirements are that program audio be on tracks 1 & 2, with Music and effects on tracks 3 & 4.
Is it possible to deliver this as one file (video plus 4 audio tracks) or will I need to deliver either 3 files (video plus 2 seperate stereo audio files) or 5 files( video plus 4 individual mono audio files)? The last two options seem a little unprofessional, requiring them to recompile the final product.

No, yes.

Similar Messages

Can you export a Quicktime with multiple audio tracks?

I have a video with split audio tracks.
I'd like to archive a copy that retains all the individual tracks so that other people could just open the file later and not have to reconstruct the tracks (i could certainly archive all the tracks individually).
the problem i'm having is that FCP seems to only want to allow me to export 2 tracks of audio. I may be missing a setting, but i'm not sure.
I can digitize a clip from a digibeta with 4+ tracks, and when i open the clip in QT, it recognizes the individual tracks, so it seems as if the capabilities are there.
have they just not been integrated yet?

Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

Can't Export to tape with CS4 and Canon XL2

I can capture just fine from my XL2 but I can't export out to tape. It doesn't set the camera up as a playback monitor. How can I remedy this situation? Is there a setting I am missing?

Make sure External Device under Export is enabled in the Playback Settings of the Program monitor.
See the picture below.

Importing tape with 2 audio channels recorded?

Can iMovie 4 handle importing a mini DV tape that has 2 channels of audio. Can these 2 channels of audio be separated for editing??

That depends on what you mean. iMovie imports in stereo (which is two channels), but those can't be separated.
If you mean the extra audio channels that can be added using 12-bit audio in the camera, the answer is NO.
NEVER use 12-bit audio:
http://docs.info.apple.com/article.html?artnum=61636

Export MXF with multiple audio channels for broadcast

Hi,
I work at a broadcast company as an editor. We always used FCP with the free sony xdcam plugin to export. This plugin seems to be one of the rare ways to export an MXF with 4 audio channels. I don't know exactly why we need to export it for broadcasting with 4 audio channels, but we do.
Since our workload has grown enormously the last few months and it will only become more we are optimizing our workflow. We also work with a lot of different endboards in After Effects and we made a nice template to work with. And since AE and Premiere can make a dynamic link we are considering changing from FCP to Premiere.
Now comes the question!: The only obstacle we could not find an answer to is exporting it with 4 audio channels as an MXF from Premiere CS5. Will there be some development on this level regarding CS6?
A solution to this should save us a lot of time!
Any help will be highly appreciated!
I also attached an example for the usual MXF files we export

I have the same problem. I have a project with multiple audio channels and I want to export them as individual channels in a MXF-file.
Method:
When I created a new sequence I choose "Multichannel" from the "Tracks" page. When I export the MXF OP1a, I choose 8 channels from the "Audio" page. None of the channels are muted.
Result:
The rendered file contains 8 channels, but only the first two channels contains any audio (main left + right), the rest of the channels are empty. Channel 1 and 2 contains the audio from all channels, but I want the channels to be seperated in the same way as they are layered in Premiere.
I don't understand your answer to wleoni75's question. Could you please help me further?

How can I export a video with audio from premiere cs 5.5 to a DVD

how can I export a video with audio from premiere cs 5.5 to a DVD

You don't... at least not directly... you export MPEG2-DVD and then use the TWO files (audio and video) in Encore
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

How can I export a file with transparent background?

Hi all,
I know InDesign doesn't allow to export a PNG file, but I need my file to be in image file format with transparent background.
I'm still learning so I am stuck here. How can I export a file with transparent background?

If you can't get the PNG file export to work, you can export a pdf and open it in Photoshop, from there you can save it as whatever you like.

How Can I Export A Table With Its Entries ( values )

Hi guys,
How can i export a table with the entries that the table is populated with ??!!
Best Regards,
Fateh

To export a table and its data you can do it a number of ways.. Do you have access to SQL Developer? If not you can do it through the APEX SQL Workshop..
Under SQL Workshop, Utilities, Data Unload, To text (or XML, whichever you are more comfortable with..).. Select your schema, click next button, select the table, click next, select the columns you want exported (select ALL ITEMS in the select List), click next, on optionally enclosed by I usually enter a " (Sometimes I have long strings in columns), click the include column names checkbox to get the column names at the top of the document, click unload data button..
To get the ddl (code to build table) Sql Workshop, utilities, generate ddl, create script, select schema, select next, click table checkbox, select next, click the checkbox of table you want to get ddl for...
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.
If this question is answered, please mark the thread as closed and assign points where earned..

Mxf with 8 audio channels

Hey guys,
I`m editing a TV-Spot with Premiere CS6 and have to export it as a MXF OP1a (SMPTE 378M) (suffix .mxf) with 8 audio channels.
When exporting it with Pr the mxf has only two audio channels (I have re-imported it into Pr for checking the channels)
How do I get an mxf with 8 audio channels?
I`m a bit stranded as I`ve to finish it until tomorrow....
(video signal compliance: ITU-R BT.709)
Thanks so far!

Go to the Audio tab on the Export Settings dialog. There you can select the number of channels in the MXF export.

Error message 'the selected file cannot be linked because it has 2 audio channels and the clip was created with 1 audio channel'

Can anyone help with the error message I'm getting 'the selected file cannot be linked because it has 2 audio channels and the clip was created with 1 audio channel'. I had to move the footage to another folder and now am unable to link it - just getting this error message instead.... Has anyone had to deal with this before?
Thank you!

Relink to the correct media.

How to render mp4 video with 4 audio channels?

How to render mp4 video with 4 audio channels?

Hi Aineaine,
Welcome to Adobe Forums.
Please refer to the below article for multi channel audio.
http://helpx.adobe.com/premiere-pro/using/clips-channels-tracks.html
Thanks

Export to tape with two separate audio channels

This is probably an obvious one, but I'm having a lot of trouble with it. How do I export to tape making two separate audio channels that can be pulled out separately; not mixed, in other words? I can print to tape, but of course that mixes the audio channels so they're inseperable. I am having trouble with the edit to tape feature, in that, for some reason I can't do insert editing.
My real question is about the separating of the tracks, though. If anyone can help me with that, I will be extremely grateful.
Thanks.

How do I export to tape making
two separate audio channels that can be pulled out
separately; not mixed, in other words? I can print
to tape, but of course that mixes the audio channels
so they're inseperable.
Are you sure that your audio channels are seperate on the timeline. You may have the tracks mono and don't realize it. For example you might have voice on channel one and music on two and three. You may need to pan the tracks right and left accordingly.

How can I export m2ts footage with 5.1 audio in PP CS5.5?

Dear All!
I have a 90 minutes project which made from 4 sequence. Sequence settings are the followings : AVCHD 1080p 25fps square pixels , 5.1 channel master audio.
I made the sequences from avchd file-s, which recorded with Sony HDR-CX700V with AVCHD 1080p 25fps and Dolby digital 5.1 sound.
Right now I finished the project with lots of effects and imported After effects compositions, and I cannot find any setting to create 5.1 sound.
I have Mainconcept codec suite, but this offer m2ts 1440*1080i settings only.( And I cannot configure the mainconcept codec settings.)
Do you have any idea how can I export the project without any degradation, and with 5.1 audio? The original footages recorded with this properties : H264/AVC - top field first - 22.000 Mbit/sec.
And I use in the project some 720p H264/AVC - progressive - 8.001 Mbit/sec videos.
Please help! Thanks a lot.

You have to consider a couple of things. Mixing 1080 and 720 material is best done in a 720 sequence, because uprezzing will seriously deteriorate quality, unless you accept black borders. That also means exporting a 720 format as maximum, unless again you accept serious quality loss. Whatever the resolution you choose, exporting AVCHD material to anything else than uncompressed, Lagarith or UT will entail a generation loss and thus quality loss. The best export settings are dependent on your delivery medium. DVD, BD or web.
Since you are working in a 1080 sequence, the quality loss of uprezzed 720 material is not a big issue, apparently, so what is the relevancy of 'the same quality' on export when you have already compromised quality?

Can't export to tape on Premier Pro CS4 Extended

When I attempt to export to tape from Premier Pro CS4 Extended, version 4.1.0, to a DV Cam, the tape rolls and records (with device control) but I get no video or audio.
I have:
-selected the timeline for the sequence
-the work area bar is over the entire sequence
-I’ve made sure the tape is record enabled
-I have tried two DV cameras, and three fire wire cords
-I am able to capture video into the computer using all of the above
-I’ve tried moving my project from my external hard drive to my internal one
Still no export…….
Any ideas why?
-I am using a Dell computer with:
            - Windows XP Professional 2002 Service pack 3
            - Intel[R] Core [TM]2 Quad CPU
            -Q9450 @ 2.66JHz
            -2/66 GHz, 3.25 GB of RAM
            -Physical Address Extension
            -Unfortunately I can not find the name of my video card but this computer was built specifically to edit video so I am sure it has one.

Make sure External Device under Export is enabled in the Playback Settings of the Program monitor.
See the picture below.

How do I export from FCP to a QuickTime file with multiple audio channels?

I'm delivering a project where the first step is to generate an HD Cam SR master, which I will be doing at a post-production lab. They will then do a QC check for me. To generate this HD Cam SR master, they need to me to bring in my 98-minute long movie on a firewire hard drive, in five equal parts -- QuickTime files. From these five QT files, the lab will then be creating an HD Cam SR master that will have...
dialogue on tracks 1 and 2
effects on tracks 3 and 4
music on tracks 5 and 6
MY QUESTION
a) I don't see any way to separate these audio tracks accordingly in the FCP menu for QuickTime export. Does anyone have any experience doing this?
b) And does anyone know the most efficient way to combine timeline audio tracks for this purpose? I have my dialogue sitting on the first FOUR audio tracks, actually. To deliver this film, I'll need to crush these four audio tracks to two, as listed above. I could generate an AIFF file, I suppose, import it back onto the timeline, sync it up, and then re-export along with the visuals to make the final QT file, but this seems like a generation loss.
thanks,
Shanked
PS the movie is made up of footage from a Sony PMW EX1. I used the codec "XDCAM 1080 24p 35mbs VBR" for editing in FCP. I'll either export to QT using this same codec or switch to "Apple ProRes" if my machine can somehow maintain the sync.

The following will answer both your questions a) and b).
Click on your master timeline and press cmd+0 (zero) to bring up Sequence Settings, then click on the Audio Outputs tab on the right. Click on the Outputs option and change it to 6. You can leave them as Stereo pairs.
Now, back on your timeline, you need to make sure all your audio is organised so each track. A1, A2, A3, A4 etc has all the relevant media on it.
Then, on the left of the timeline you see the Destination toggle buttons, then you see the Padlocks to lock tracks, then you have the Toggle Auto Select squares. If you right-click on the Toggle Auto Select squares you bring up a little sub-menu, at the top of this list you'll see Audio Outputs, which will show the stereo channels for that particular track. As you've changed the number of Audio Outputs in the Sequence Settings, the list will show: 1&2, 3&4, 5&6. You just tick whichever channels you want.
In your case, you have dialogue on the first 4 tracks, no problem, just go down through tracks 1,2,3 and 4 as described above and assign these to Audio Outputs 1&2.
Then just go down through your music and effects audio tracks and assign them accordingly.
Now, when you export your timeline as a self-contained media file, it will have different audio channels.
I hope that makes sense. When you change the number of audio outputs as described in the first step, I believe the rest of it is fairly self explanatory, once you know where the settings are.

Can I export to tape with 4 audio channels

Similar Messages

Maybe you are looking for