Can I extend both wifi signals, main and guest, from my AE to a express

I have a AE and I use the two wifi signals one has to have a password and the other is open, we have added on to our church and I want to extend the range of both to the new building using a a express, can this be done?

I want to extend the range of both to the new building using a a express, can this be done?
Unfortunately, it is not possible to "extend" the Guest network on an Apple router. Or more correctly, if there is a way....no one has reported finding it.

Similar Messages

  • Can I extend both a 2.4Ghz and a 5Ghz wireless network at the same time with a second Timecapsule / Extreme ?

    Can I extend both a 2.4Ghz and a 5Ghz wireless network coming from a Timecapsule  with a second Timecapsule / Extreme at the same time?

    I am currently extending my 5Ghz network via an Express without any problems, but the Express can only extend either / or. I just want full coverage for both networks in the whole house.
    If you can extend 5 GHz now with an AirPort Express and get satisfactory results, then the AirPort Extreme will work to extend both the 2.4 GHz and 5 GHz bands in the same location.
    However, your computer is going to connect to the band with the strongest signal, so it may....or may not....connect to 5 GHz given a choice of two signals.

  • Can I extend my wifi signal using an Airport Express to Airport Express?

    My main wireless is an airport express that's about 6 years old. I recently purchased a new airport express (with 802.11n and airtunes) to extend my network range to the other side of the house but it doesn't seem to work. Will the airport express only extend network via a base station? I do not have base station but now I'm thinking I should have bought that instead of another express. Please advise.
    Thanks,
    Aaron

    Welcome to the discussions, Aaron.
    It can be a bit confusing, but an AirPort Express is a base station.
    The issue you are having is the result of trying to use an older "b/g" AirPort Express with a newer "n" version of the product.
    Whenever you have a "mix" of older and newer devices on a network and you want to provide more wireless coverage, you must use the WDS configuration on both devices.
    While this will provide more wireless coverage, there are some downsides to WDS:
    1) WDS operates only at "g" wireless speeds, so you will lose any advantage of having a newer "n" AirPort Express
    2) The bandwidth of the network will be cut in half when WDS is configured. So, the bottom line here is that while you will have a bit more wireless "coverage", you'll also have a "g" wireless network that is running at half speed.
    3) Many users find WDS difficult to configure.
    If you were to consider an additional purchase of another newer "n" AirPort Express, then you could make use of the "extend a wireless network" feature which maintains "n" speeds throughout the network while maintaining close to the original bandwidth of the network. This type of configuration is also much easier to configure than the WDS type setup.
    Post back to let us know if you want to try the WDS setup or whether you want to upgrade to the newer "extend" setup and we can provide you with instructions on configuration of either method.
    Message was edited by: Bob Timmons

  • Can i use my time capsule to extend my wifi signal without physically connecting it to my router?

    I currently have a BT Homehub connected to a modem, which is connected to the ethernet port in my wall (which is downstairs). I bought a timecapsule to wirelessly back up my computer. It is connected via ethernet cable to my router. I have recently been having trouble getting a wifi signal in one room in my house (upstairs). To fix this i was wondering whether it is possible to move my time machine somewhere upstairs, to a location closer to this room, and have it transmit a wifi signal without it being connected to my router via ethernet. And if so how would i go about doing this?
    cheers
    jadidev

    Can i use my time capsule to extend my wifi signal without physically connecting it to my router?
    Yes, if you have an Apple router.
    No, if you have a BT router.
    IF....your Time Capsule is currently set up to provide a wireless network signal, you could add another Apple device...like an AirPort Express....to extend the Time Capsule wireless signal.

  • What is the most sensible way to extend a wifi signal. I am in a cinderblock house and I have to buy something that will give me a single network but added range from my airport extreme base station.

    What is the most sensible way to extend a wifi signal. I am in a cinderblock house and I have to buy something that will give me a single network but added range from my airport extreme base station.

    Use an Airport Express. Configure the AEBS to allow it's wireless network to be extended. This is a dropdown menu option under the Wireless tab. Configure the Airport Express to Extend an Existing Network also under it's Wireless tab. You will need to provide the name of your network used in the AEBS as well as the network's access password.

  • I have a Time Capsule as my main WiFi router in my home.  I'd like to extend my WiFi service to my guest house located approx 100 feet away. Will the AirPort Express fill this need?  Is the AirPort Extreme a better fit?

    I am using a Time Capsule in conjunction with my IMAC 27" system as my main WiFi router in my home.  I would like to extend my WiFi service to my guest house which is located about 100 feet away.  Can I use the Airport Express to provide this extended range?  Would I be better served to use the Airport Extreme?  Thanks!

    The normal location for an AirPort Express or AirPort Extreme is a point that is about half way between the main router....the Time Capsule in this case.....and the area that needs more wireless coverage.....the guest house.
    I doubt that you will be able to locate an AirPort at this "half way" point, correct?
    Before you buy anything, take a laptop, iPhone, iPad, etc out to the guest house as a test to see if you can log on and get a reliable Internet connection over the wireless.
    If you can, then either an AirPort Express or AirPort Exreme could  be used to provide additional wireless signal coverage in the guest house.
    If you cannot get a reliable connection with the "test" mentionded above, neither AirPort will help since they can only "extend" the quality of signal that they receive. 
    If this is the case, you will need to look at running an Ethernet cable from the Time Capsule out to the guest house to provide the reliable connection that you will need.

  • We have two ipads and two different itunes accounts, can I sync my wife's apps and she mine?

    we have two ipads and two different itunes accounts. can I sync my wife's apps and she mine?

    Yes, you can use the apps from both accounts on the same iPad. You will both need to authorize each others iTunes account for use in each others computer account. You may authorize up to five Macs/PCs to use stuff from your account and that computer can then transfer the stuff to up to 10 iOS devices.
    Open iTunes in your account and have your wife sign into her iTunes account in the iTunes app. First authorize your computer account to use her iTunes stuff from the iTunes Store menu. Then have your wife download all of the iOS apps that you want to use into iTunes. Now you do the same in her computer account.
    Remember that only you can update apps acquired with your iTunes account and vice versa. So you will need to either sign into iTunes on the computer or directly on each others iPad to update any apps that need it. It is a little confusing at first, but you get the hang of it quickly.

  • I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

    I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

    It would depend on how old your IMac is, how mush memory you have, it it can be upgraded by OWC, etc. I have a 2006 Macbook Pro and would NOT put Mavericks on it or espeacially FCP 10.1.1 on it because the most memory it can have is 4 GB. You need at least 8 GB to work with Final Cut Pro 10.1.1. IMHO.
      I would try to find a copy of Final Cut Express perhaps.
      Does this answer your question?

  • Can you use both an employee discount and a military discount on one account?

    Can you use both an employee discount and a military discount on one account?

    No.
    You can only have one ELEU (Employee Corporate Discount) on an account
    So choose the one that has the greater percentage which is probably the military.

  • HT201077 I can not see the photos I have chosen when I post them on my Mac yet I can see them both on my iphone and Ipad.

    I can not see the photos ( Shared Photostream) I have chosen when I post them on my Mac yet I can see them both on my iphone and Ipad.
    If I post them on my other devises they do show up on my mac but if I add to them from my Mac they still have a no show on it but in turn they are now on my other devises.
    What am I doing wrong please??

    Rented movies downloaded to an Apple TV can't be transferred to any other device.
    (86941)

  • How do I get my wife's photos and video from her iCloud to my iPad?

    How do I get my wife's photos and video from her iCloud to my iPad. She no longer has an iDevice and I want to retrieve some really sentimental photos and videos of my grandson. I've logged on to her iCloud account on my iPad, but don't know what to do next.
    Thanks
    Tony

    Her camera roll photos and videos would be included in her backup.  Restoring her backup to the iPad should recover them.
    Start by creating a current backup of your iPad that you can restore your data from later.  It's faster if you do this on your computer using iTunes; if you can't, create a backup in your iCloud account.  If you can back up to your computer, do this by connecting the iPad to your computer, opening iTunes and going to File>Devices>Back Up.  Then go to File>Devices>Transfer Purchases.
    Then erase the iPad and restore her iCloud backup as explained here: https://support.apple.com/kb/ph12521.  When it's done, import the recovered photos and videos to your computer as explained here: http://support.apple.com/kb/HT4083.
    Then erase the iPad again and restore the backup you made earlier, either from iTunes or from iCloud depending on where you backed it up.
    If you want the photos back on the iPad, put them in a folder and sync them to your iPad by selecting the folder on the Photos tab of your iTunes sync settings and syncing.  If you want to videos back on your iPad, import them to your iTunes library (File>Add to Library), then sync them to your iPad from the Movies tab of your iTunes sync settings.  You will then find them in the Home Movies section of the Videos app on your iPad.  Just so you are aware, photos that you sync to your iPad can only be removed later by syncing them off your iPad (by deselecting the folder on the Photos tab and syncing again).  They can't be deleted on the iPad itself.

  • Timed Access controlling Main and Guest Network

    I have a Time Capusle 4G running software v7.5.2. I am running a Guest Network as well as a closed network.
    In the Timed Access window i have default set to "no access". Then, all the computers that are allowed access to the main network are on the list. My guest network is broadcasting but when a user tries to connect to it, they get an "Unable to connect" message. If I change the default access in Timed Access to "Everyday", users are then able to connect to the Guest network again.
    Obviously, this is a bug/missing feature and has been for several software revisions. I don't want people accessing the main network that aren't on the timed access list. However, I still want guest users to access the Guest Network, without using MAC address filtering on the Guest Network.
    It looks to me that the Timed Access window is controlling the restriction of the Guest and Main network. Which renders the Guest Network feature pretty much useless.
    Hopefully this will be addressed in the near future. If other people are experiencing this problem, Please let me know.
    -Ghost

    It looks to me that the Timed Access window is controlling the restriction of the Guest and Main network.
    Your observation is correct. Access control using Timed Access is an ALL or NOTHING feature for both the Main and Guest networks. The Guest network is basically a VLAN function.

  • How can I retrieve my back up documents and apps from icloud?

    how can I retrieve my back up documents and apps from icloud?

    Apps by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    If you restore your iPod from iPod backup it will restore both the documents and apps that were on the iPod when the backup was made. To restore see:
    iOS: How to back up

  • How can i know who get my photos and messages from my icloud???

    How can i know who get my photos and messages from my icloud???

    Nobody, except the persons who have your username and password or with whom you share photos streams would be able to see anything from you.

  • How can i know who get my photos and messages from my icloud???, How can i know who get my photos and messages from my icloud???

    How can i know who get my photos and messages from my icloud???

    The following website gives you an overview on how your iCloud data is encrypted: https://support.apple.com/kb/HT4865 So as long as you don not share your Apple ID with someone else, everything should be fine.

Maybe you are looking for

  • Loading problems.

    Hi All, In my Production system, i just ran an full upload from source system  to  BW dso and from dso i triggerred an delta to cube Now i found that there is no use of this uploads and it disturbed the values in cube. i have a proposal 1. to delete 

  • Accordion widget

    Hello! I have a question, why not work accordion widgets and thumbnails when I upload it via FTP to my server? Already contacted my hosting provider asking if they had the solution, I gave my directory permissions and widgets do not work. another thi

  • Pass page parameter to discoverer portlet

    Hi All, iAS Version 10g(9.0.4) I created worksheet(graph) using Discoverer plus having 4 parameters. I published the discoverer graphs as discoverer portlet in Oracle portal. However for this worksheet it shows (No parameters) in Page --> Properties

  • Icons in light table view?

    In light table view, some of my slides have blue triangles at the bottom right, others do not.  Some have three horizontal lines in the top right, some do not. What do these icons stand for?  Do they have an interactive function?  Nothing seems to ha

  • Crystal Reports Viewer 2008- cannot get filters/sort to work

    We have CR 2008 and have downloaded the viewer for end users to be able to filter the report results. My developer reports that he is able to apply parameters when working in the designer but that the parameters do not allow you to set them when look