Can I extend my Time Capsule 11n network using a new AE 11ac?

I currently have a 3TB Time Capsule 802.11n wirelessly connected to an Airport Extreme 802.11n on another floor of my house with all my AV components hard wired to the AE.
The extended AE seems to fall off the Network and I have to unplug it, to reset it, more often than I would like.
I was wondering if purchasing a New Airport Extreme 802.11ac as a replacement for my AV extended AE would give me a stronger signal and not fall off as much.
So I would end up with a Time Capsule 802.11n connected to my router and computer ( for Time Machine back ups ) and a new Airport Extreme 802.11ac extended wirelessly, with my AV components hard wired to the AC unit.
Thank you in advance

Users often forget that when you have an extended network using wireless, that the "extending" device....the AirPort Extreme in your case....can only "extend" the quality of signal that it receives. As you may have guessed, a better term for "extender" would be "repeater".
The fact that you are experiencing drops on the AirPort Extreme tells us that the AirPort Extreme is likely.....
1) located too far away from the Time Capsule,
2) there are too many obstructions in the signal path between the Time Capsule and AirPort Extreme,
3) the network is picking up wireless interference from other RF sources, or
4) a combination of any of 1), 2), or 3) is at work.
If the AirPort Extreme is having trouble picking up a good quality signal from the Time Capsule, then any other device that you might install in place of the AirPort Extreme will likely have problems as well.
Since wireless is always half science and half voodoo, there is always a possibility that a new AirPort Extreme might work a bit better than the current AirPort that is extending, so keeping in mind that Apple provides a 14 day return privilege, you could take a chance and try a new Extreme to see if that might improve things.
This is known as the "try it and see" approach. Another approach might be to try to investigate some of the reasons why the current AirPort Extreme is having problems, to see if the performance can be improved.
Please let us know how you would like proceed.

Similar Messages

Solution for Windows 7 can not connect to Time Capsule Guest network

Problem: Sony Vaio running Windows 7 (64bit) will not connect to my Time Capsule Guest network
For added security, I set up a guest network at home. My friend brought over a Vaio and was unable to get an internet connection via my Guest network. The Vaio connected to the Time Capsule with no problem, with full bars, but was not able to get on the internet.
After way too many hours going through useless online suggestions and even calling Apple tech support to see if there might be a known compatibility issue (where I was told they had no idea and I should call Mr Softy) I discovered that the Vaio had somehow set itself to use the DNS Server address of the Time Capsule, main network, not the guest network. (ie Main network uses 10.1...., Guest uses 172.1....) so once I set the Vaio to Obtain DNS server address automatically it fixed the problem and connected to the internet via the Guest network.
Detailed solution:
Configure Time Capsule Guest as follows:
Network Name: fill in the blank
Allow Guest Network to communicate: left unchecked
Guest Network Security: WPA/WPA2 Personal
Password: fill in the blank
Configure Vaio:
Set up new connection from the Network and Sharing center using the name given to Guest network
(for password chose WPA2-Personal>AES>then your Guest Password)
Select Manage wireless networks from left column in main Network and Sharing center window
Select Adapter Properties
Click on Internet Protocol Version 4 (TCP/IPv4) to highlight it, and Select Properties
Make sure both Obtain an IP address automatically and Obtain DNS server address automatically are selected then OK & go back to Network and Sharing center
Connection is active.
Hope this helps those condemned to playing system admin for their windows brethren

Great post!
Here are a couple of more methods to add to your bag of tricks:
Method #1: Use Win7's built-in diagnostics to remedy network maladies
• Start > Start Search > type in: ncpa.cpl <Enter>
• Select current active connection.
• Click Diagnose this connection
• Select Reset the network adapter
Method #2: Use the ipconfig tool to renew the DHCP-provided IP address information
• Start, then click Run, and then, type: cmd, and then, press <enter>
• At the prompt, enter the following commands; press <enter> after entering each one:
ipconfig /release
ipconfig /renew

Extended Time Capsule WiFi network using Airport Express - Result: SLOW internet

Hi everyone,
I have a little issue with my wireless internet.
Currently I have a 2Mbps down and 256Kbps up internet home. My ISP modem is connected directly to my Time Capsule (TC) and I don't have any problem when using the WiFi from the Time Capsule.
Recently, I wanted to extend my TC WiFi Range and bought an Airport Express to do that job. I've configured everything using the default/recommended settings.
The WiFi range was correctly extended but the problem is now, when I'm using Internet in the extended zone; it is REALLY slow!! I have done some speed tests in the extended zone with different devices (iPad, iPhone, PC, Mac...), and as result I have in average 128Kbps down and 50Kbps up!! You can imagine how this is annoying!
I tried to see the configurations of the Time Capsule and the AirPort Express and I didn't find anything that could explain that.
So, could someone please help me to fix that problem?
Thank you all in advance,
Mathieu
P.S.: FYI, The radio mode used for the wifi is 802.11n (802.11b/g compatible).

I'm not sure I necessarily agree at this point, as the two walls could cause significant Wi-Fi interference to prevent the extended network to perform well beyond the room the TC is in.
One way to quickly determine this is to make a Signal-to-Noise Ratio (SNR) calculation at the location of the AXn. SNR (in dB) = Signal (in dBm) - Noise (in dBm) and it represents the signal quality at that location from the router providing the wireless network.
To get an accurate picture, you will want to temporarily power-down the AXn since we only want to calculate the SNR for the TC at the location of the AXn.
You can get the Signal and Noise values directly from your Mac. Of course, it would be easier if your Mac is a laptop version, so I will assume at this point that it is.
While placing your Mac laptop near the AXn, open up the System Profiler. (ref: Apple icon in the menu bar > About This Mac > More info ... > Contents > Network > AirPort Interfaces > en1 > Current Network Information > Find your wireless network > Signal / Noise)
A SNR of 25+ dB would be desirable. For HD streaming performance, you will want an SNR of 35+ dB. Please post back your results.

MacBook Pro can't connect to Time Capsule or network drives

I have a MacBook Pro (2.2 GHz, Intel i7, 4 GB RAM) and for some reason it can not connect to either the Time Capsule or any network drives. We were recently out of town on vacation and before the vacation, everything worked fine. Now, that we are back, the MacBook will connect to the wireless network and can access the internet, etc but it can not access either the Time Capsule or any drives I have setup as shared that's connected to the iMac. I go to the Network and it doesn't show anything as available to connect to.
I have restarted both the MacBook and the iMac and even turned off and back on file sharing on the iMac. I have even restarted the Time Capsule but nothing is working. Both the MacBook Pro and iMac are running Lion (10.7.2). All have the latest updates, etc. Also the Time Capsule has all of the latest firmware updates. Again, this was working fine last week. Now this week, nothing.
Can someone please help? I use the Time Capsule for backups and the network drive for iTunes. Without those, the MacBook Pro is missing a lot of functionality.
Bronson

It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) Try to select your Wi-Fi network from the AirPort menu.
3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
These steps may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

My PC (Windows) can't see my Time Capsule wireless Network

I just installed a wireless network with a Time Capsule and it's working fine for the three Macs and the printer in the household. However, I still need to have access to the wireless network for one PC running Windows. Problem is the PC doesn't "see" the Time Capsule Network. What am I missing and how can I set up the PC on the wireless network?

Try downloading AirPort Utility for Windows here:
http://support.apple.com/kb/DL1391

I've just changed my modem, and I can't find my time capsule

I've just changed my bigpond modem, and have joined all my other hardware to the new modem (Apple TV, iphones, iMac etc), but now my time machine can't locate my time capsule which was used as a back up. it just doesn't appear in Airport Utilities. Have rebooted everything, and the internet connection is fine, but that **** amber light won't stop blinking.

I'll guess that "bigpond" unit is either a router or a combination modem and router. You can probably get AirPort Utility to "see" the Time Capsule if you connect your Mac to it with an Ethernet cable. Then you can see why the Time Capsule isn't happy. If the two devices are too far apart to make a cable feasible, then do a "factory default reset" of the Time Capsule and reconfigure it.

How can I reconfigure an Airport Timecapsule and Airport Extreme Base Station to extend a new Time Capsule 3TB network.

Previously they were configured to be part of a network attached to a cable modem. Now I have a DSL modem. I can get the 3TB Time Capsule tower to be recognized by my AirPort Utility but cannot get the older 2TB Time Capsule and Extreme Base Station to be recognised as wifi extensions of the 3TB Wi-Fi Base Station. This latter base station is set up in Bridge mode and the wifi is switched off on the DSL Modem. I am trying to recreate a home network (I have created a newly named one) and use the Apple products as the wifi routers, leaving the fibre optic-supplied DSL modem to interface with the internet.
I would have thought that I should set-up the 3TB Time Capsule Base Station in DHCP network mode, but trying to do so gives me error messages and renders the network inoperative. Does anyone have any suggestions as to how to get the AirPort utility to recognise the two other devices (Base Stations) as extensions of the main one? I have tried with RJ45 cabel connections to no avail.

First, it would be wise to update your computer to OS X Mavericks. It's just a free update, but it really helps your computer.
Once you've done that, on to the fix.
In Airport Utility, select the old router and click "edit". Click the Wireless tab. Select Off. Click Update, and wait. During the update, you should use your phone to read this, as you may have no wireless for a time.
Once the update is done, click the new Time Capsule and click "edit". Select the wireless tab, and change the Network Mode to "Create a Wireless Network". Choose your name, security and password. Click Update. Once the new Time Capsule is plugged in and wired, you should be able to connect to your network from your laptop.
Back on the old Time Capsule, go to the Wireless Tab and select, "Extend a Wireless Network". Select your network, and click update.
On the Airport Extreme, do the same as the old Time Capsule.
You should be done! Now, you can move your old Time Capsule somewhere else as use it as an extention of your network. And the same with the Airport Extreme. Enjoy your 5TB of network storage!

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

Using Airport Express to Extend a Time Capsule Network: Results (*Long*)

Thought I would share my recent (2 hours ago) experience with setting up an Airport Express to Extend a Time Capsule 802.11N 5Ghz Network. Basically I just followed the directions in the Apple Airport Utility, using the "Extend a Wireless Network" setting:
Time Capsule (TC) 802.11N 5Ghz: In computer room
Linksys (LNK) 802.11g configured as dual network router with TC, also in computer room.
Airport Express (AE): In living room, about 50' away, several old plaster walls in between.
According to iStumblr:
1) I get an 80% signal from my TC when my MacBook is practically sitting on top of it.
2) I get an 88% signal from my Linksys 802.11g sitting next to the TC
3) I get 35% signal from my TC when my MacBook is in the living room. This is NOT enough signal, for some reason, to maintain a decent internet connection.
4) I get a 46% signal from my LNK from the same location. This IS enough signal to connect to the network.
5) With the AE configured as "Extend a Wireless Network" to the TC, and placed in the living room (again, about 50' from the TC base station), I get a 55% signal from the AE (which shows up as the same name as the TC network, for obvious reasons) Again, enough signal to connect to the network.
I did some internet speed tests using SpeedTest (take these with a grain of salt, of course)
1) From computer room over TC: 18Mb/s~22Mb/s average over 2 days of testing
2) From computer room over LNK: 18Mb/s~22mb/s average over 2 days of testing
3) From living room over AE(extended network from TC): 5~7Mb/s average in the last 2 hours
4) From living room over LNK: 12~14Mb/s average over 2 days of testing
Preliminary conclusions:
1) Setting up an extended network is pretty straightforward, and works without issue.
2) My 802.11g network with my old Linksys is far superior than my new extended 802.11N 5Ghz network, at least for internet connection speed.
3) I feel a bit irritated buying this AE now to extend my 802.11N network, if its not going to give me any advantages over my ancient 802.11g network
4) File transfers may still be better over the 802.11N-I will test that out at some point.
5) I have not tried WDS instead of "Extend a Wireless Network"-not sure what the benefits would be.
Computer Notes:
MacBook Aluminum-MB(Al) 2.0 C2D (802.11n)
finds 8 wireless networks in my neighborhood (3 of them are mine)
MacBook White-MB(Wh) 1.83 CD (802.11g only)
finds 10 wireless networks in my neighborhood (3 of them are mine)
Oddly, the signal strength of my networks isn't that different between the two computers-between 2% and 5%, even though it can't see as many networks. The 2 networks the MB(Wh) CAN see are at around 21% and 25% signal-not sure why the MB(Al) can't see them at all.

Your biggest mistake is confusing signal strength with signal quality. The signal indicator indicates strength and nothing else. You need to be using iStumblr to look at SNR (Signal to noise ratio).

Extending the range of my Time Capsule N Network

Not sure whether I should post this here or on the TC forum but...my TC is set to provide a wireless N only network at 5ghz but the range is not long enough to reach all parts of my house.
A google search didn't seem to show any range extenders for wireless N networks.
Does anyone know if I can use either an airport extreme base station or an airport express base station as a range extender?
I know I can use either as an access point but that means that data will only get to the base station at max 200mbps (I have a powerline network with a max speed of 200mbps) whereas I know my macbook is connecting to the TC at 270mbps which is why I'd really like to achieve this with a range extender.
Any ideas?
Thanks,
Anthony

Does anyone know if I can use either an airport extreme base station or an airport express base station as a range extender?
Yes, you can use either the 802.11n AirPort Extreme or AirPort Express base stations to wirelessly extend your Time Capsule's wireless network.

How can I set up a wi-fi network, using one time capsule and two airport express

how can I set up a wi-fi network, using one time capsule and two airport express ?
The time capsule is near the Mac. ok
The first Airport is on the corridor, ok, works well and the App on the iPad signals so, ok
But when I plug the next Airport on another room nearby nothing happens, and signals disconected ....
is the signal so weak that is not able to go to ono room to the other ?

Well, even if you have the first express set up to extend the network, the second express can only extend from the TimeCapsule.
Maybe you got walls of sheetrook in the way, or kitchen/bathroom tiles, etc, dampening the signal rapidly.

Will I be able to extend a dual band network from a Time Capsule 2nd generation with the new Airport Express on both bands?

My Time Capsule 2nd generation is the main accesspoint in my house. It resides on the second floor in our living room. On the first floor in our kitchen I have an fairly new Airport Express that extends my network on the 5 GHz band and allows me to stream music via Airplay. I had to choose 5 GHz since the 2,4 GHz band is interfered when using the microwave oven. However, we have a rather old house with loads of metal in the concrete walls and therefore the 2,4 GHz signal from the second floor proivded by the Time Capsule is hardly available on the first floor. Since all our iDevices (iPhones and iPods) operate at the 2,4 GHz band we sometimes don't have a proper wi-fi connection. I had tried before with another (older) Airport Express that only operated at the 2,4 Ghz band, but I could get a proper connection between the Time Capsule and the Airport Express. Therefore I think it would be the best solution if the new Airport Express would provide both bands simultaneously.
If I replace my existing Airport Express with the new one, will I be able to extend my network on both bands?

It sounds like you may have configured your Time Capsule to use a separate name for the 5 GHz network and then setup the Express to extend that specific band.
In order to extend both bands, the Time Capsule setup will need to be changed so that both bands are using the same name. In other words, you would uncheck the option for the 5 Ghz name.
Then, setup the new Express to extend the Time Capsule network.
This is the only way that they Express can extend both bands. It cannot extend both bands if you have assigned a separate name to the 5 GHz network since you will be forced to choose either the 5 GHz band or the 2.4 GHz band for the Express to extend.
How the microwave oven will affect this is not known. This will one of those things that you have to try in your home to know if it will work well, so it might be a good idea to understand the store's return policy before you buy....in case things do not work out as hoped.

How can I add the Time Capsule to my Netgear Nighthawk R7000's Network?

I Want to connect my Time Capsule To My Nighthawk and still have access to the rest of my networt. How do I do it?

Thanks for confirming that for me.
If the Time Capsule has not ever been set up, then it is still in its factory default settings and you can proceed with the setup.
Connect the Ethernet cable from one of the LAN <--> ports on your Netgear router to the WAN "O" port on the Time Capsule
Power up the Time Capsule for a minute or two. The light will be slowly blinking amber at this time.
Click the WiFi icon on the menu bar at the top of the Mac's screen
Look for a setting of New AirPort Base Station
Click on Time Capsule just below that
The example below shows an AirPort Extreme. You will see Time Capsule on your screen.
The setup utility will open up and take 15-20 seconds to analyze the network, then a screen similar to this will appear, except you will see a Time Capsule icon:
Network Name........Type in the name of the network that you want to use. If you want the Time Capsule to "extend" the Netgear network, type in same wireless network name that the Netgear router is using.
Base Station Name......Type is a simple name for the Time Capsule. Mine is TC, for example.
Password........Type in the password that you want to use for the network. If you use the same wireless network name as the Netgear, then you would type in the wireless password for the Netgear network here
Verify the password that you entered
Click Next......and the utility will set up everything for you. When you see the message of setup complete, click Done.
That's it.

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

Sorry, but it is not possible to "extend" the Guest Network using either wireless or an Ethernet connection.

How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly

I want to extend my wifi off my Time Capsule with an Airport Experess in a part of my house that has no data cable ran to it. How do I do this?
Thanks

No more meseges.
في ٢٦/٠٨/٢٠١٤، الساعة ٢١:٤٥، كتب Apple Support Communities Updates <[email protected]>:
New discussion activity
Bob Timmons has posted in the AirPort community.
How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly
Assuming that you have the model A1264 or A1392 version of the Express, it must be located where it can receive a strong wireless signal from the Time Capsule to be able to extend it correctly.
A good general location would be a point that is about half way between the Time Capsule and other area that needs more wireless coverage.
You will use AirPort Utility on your computer to configure the Express. An iPhone or iPad could be used as well.
We can provide more help....if you need it....but we'll need to know what version of AirPort Utility that you are using on your computer....or whether you want to use an iPhone or iPad to setup the Express.
https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-26506753-46613 2/AboutAirPortUtility.png
To post a reply, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

Can I extend my Time Capsule 11n network using a new AE 11ac?

Similar Messages

Maybe you are looking for