Can I extend the width of auto-complete beyond form field itself?

I have a form field that has a width of about 30. Often, the information entered is longer than 30 characters.
I use auto complete on my forms option.
Is it possible to extend the drop down of auto-complete-saved information beyond the 30 characters of the form-field itself? Sometimes the first 30 characters of more than one previously entered answer are the same.
The only way to know if I selected the right one is to just guess and then go to end and see if I picked the right one.
Thanks in advance.

There are a few extensions that allow you to "drag" a '''textarea''' larger than what the web page specifies, but AFAIK those extensions only work with multi line textareas not with '''''single line''''' form textareas.
I have used this extension in the past, but it has been problematic in Firefox 3.6 versions. IIRC it didn't ever work with single line textareas, like in forms. <br />
https://addons.mozilla.org/en-US/firefox/addon/3818/
Never tried this one. <br />
https://addons.mozilla.org/en-US/firefox/addon/8287/
I didn't care for this one when I tried it a few years ago, <br />
https://addons.mozilla.org/en-US/firefox/addon/14371/

Similar Messages

  • In att yahoo mail my left column with the inbox ,etc extends the width of page and I can't bring it back to the left.

    in the new version of att yahoo mail that I have been using for weeks for some reason the left column which shows inbox etc extends the width of a page and I am not able to see the emails. I cannot pull the column back to the left. If I switch to ATT yahoo classic it is fine, but not in the newer ATT yahoo mail.

    [[Font size and zoom - increase the size of web pages|try Font size and zoom - increase the size of web pages]]

  • How can i change the width of a webapp depending on the view?

    In Dashcode how can i change the width of the web app depending on the width of the view. I am using the stack layout.
    For example if view 1 had a width of 400 px
    the web app would have a width of 400 px
    if i changed to a view with a 400 px
    the webap would change to have a width of 400 px
    it automatically adapts the the hight of a view how do i do the same with the width.

    While they may auto adjust to what it thinks is a correct width, far too often it allocates way too much room and that causes lists with 4 columns to be much longer than they need to be and without the ability to adjust them, lists look strange.
    http://twitpic.com/23ro09/full is an example of the first column having been allocated too much room.
    Denzel

  • How can I extend the time I am timed out on the new Firefox version?

    The new version of Firefox which I recently installed times me out after a very short period of time. I can I extend the time that Firefox times me out to at least one hour of inactivity.
    == This happened ==
    Every time Firefox opened
    == right after I installed the new Firefox version today

    If you have an Exchange account on your iPad for which the admistrator has specified a limit on how long you can set the auto-lock, the only way to change it is to remove the Exchange account. Once you put the Exchange account back on, the restriction will be back in place. Apple has nothing to do with this.
    Exchange admistrator often require that devices be passcode protected and that the device will autolock so they delete the "Never" setting.

  • How can i extend the battery life of my iphone 4s? when i left it in standby mode when i saw in 5hours it drains to 5%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

    How can i extend the battery life of my iphone 4s? when i left 50% it in standby mode when i saw in 5hours it drains to 5% i saw 45%, i thought when i leave the phone the percent is still the same. whant am i goin to do?

    I was not aware of the fact one could use ringtones as alarms, this will suffice! Although I foresee some very awkward times as the sound does not stop once I respond to the reminder (it keeps going for good five - ten seconds after I "stop" the reminder), but it's better than missing it altogether!
    Thank you very much!
    Regarding the Alarmed app, doesn't it have to be running to actually remind you?
    -Modular747: I don't know anyone who actually reads the terms of service agreement, those things are usually up to thirty, small print pages full of legal jargon. Rules, I do read - not the legal documents (also they often contradict the laws in my country, but that's a whole different story).
    I agree with you - the average customer support consultant mostly cares about keeping his job and earning his salary (don't we all?) and thus racking up completted tasks (i.e. getting rid of customers as fast as possible - in a good mood). The "threat" none the less is real, if a cell phone causes me more trouble than it is worth, I will indeed throw it away (I have done so before) - and recommend a different brand to anyone willing to listen.
    Don't get me wrong, I love Apple and I've been faithfully using and recommending their producs for twenty years now, not because of fanboyism, but because they earned it. This calendar issue, however, is like a toaster that doesn't automatically eject the toast at the set time. I see it as a major flaw and after googling around a bit I see that it's been around since at least 2007 (THAT'S SEVEN YEARS!!) so I strongly believe they are aware of this problem by now, but are choosing to ignore it for some mysterious reason and it really ****** me off.
    I will send the feedback but based on my observations I suspect the Send button is merely a cleverly disguised Delete button.

  • I set up a reverse  proxy server but the DOJO and auto complete dont work

    I set up a reverse proxy server but the DOJO and auto completer don't work . Am I missing a configuration on the proxy server ?

    Well it would help if you can provide some more details on your configuration/setup.

  • I get a neighbor's wifi on my MacBook in my bedroom.  How can I extend the range to the MacMini in my living room?

    I get a neighbor's wifi on my MacBook in my bedroom.  How can I extend the range to the MacMini in my living room?

    You can't. It's not your network.

  • Can I extend the slideshow horizontal in a straight line but not full page up and down?

    Can I extend the slideshow horizontal in a straight line across the page end to end, but not full page up and down?

    Hi
    Please check these videos for help :
    https://www.youtube.com/watch?v=BDgERSf2a5k
    https://www.youtube.com/watch?v=diUtfwFGI1w
    Thanks,
    Sanjit

  • I inadvertently created a very large file. Not needing it I sent it to the Trash Can. However, the deletion process never completes. Any suggestions as to how to delete it ?

    I inadvertently created a very large file on my hard drive. Not needing it I sent it to the Trash Can. However, the deletion process never completes. Any suggestions as to how to delete it ? I re-installed the OS but the file was still there taking up needed space.

    Command-click all of the files you want to delete and don't actually move them to the Trash until you've gone through the entire folder.
    (63341)

  • How can i extend the Apple TV storage to get an 1 TB? apple has any external hard disk or similar?

    how can i extend the Apple TV storage to get an 1 TB? apple has any external hard disk or similar?

    Only AppleTV1 has an internal PATA drive. The largest PATA drive available is 250gb.
    Hacks are available to use the USB port on AppleTV1 to access more storage.
    AppleTV2 does not have an internal drive.
    Why do you need more storage in your AppleTV? iTunes streams video to AppleTV so no need to store it locally.

  • How can I extend the range of my chart?

    I've asked this question before on here, and found that shift-clicking for more cells has usually worked, but I have now run into a new problem...
    My chart used to cover the range B5:P50. However, since moving a column it now only covers the cell range H5:P50. My chart is on a separate sheet. Usually if I want to add more to the range it will be downwards, so I just click on the chart, then click on the Main Sheet and shift-click to add more cells. Unfortunately, because the range I want is to the left of the highlighted area this time, I can't use shift-click.
    How can I extend the range of my chart so it includes cells to the left of the currently selected range? In Excel I'd be able to just type the range in a box somewhere, rather than all this GUI-based clicking and dragging which is actually more difficult! Is there somewhere I can just type the range in that I want?
    Thanks!

    "I want to add some series that are missing from the chart. How do I do that?"
    Here's a two step process to do that:
    Select the chart to show the the data selection on the associated chart.
    Click in the leftmost column of the data, and drag left to change (move) the selection (blue arrow) for the result below:
    Grab the control handle (small circle) at the bottom right corner of the selection, and drag  right, as indicated by the blue arrow.
    Result shown below.
    Reassign colours and do other formatting as desired.
    Regards,
    Barry

  • HT1689 How can I extend the number of times my phone rings before going to answerphone

    How can I extend the number of times my Iphone 4s rings before it goes to answerphone

    Call you carrier and ask them how you can change this.  The number of rings before voicemail kicks in is set by your carrier.  Some have the option to do it from your phone if you know the sequence of codes to send, but you need to ask your own carrier how to do it for their system.

  • Upon Removing Ubuntu, How can I Extend the C and D Drive in Windows 7?

    Upon Removing Ubuntu, How can I Extend the C and D Drive in Windows 7?
    Previously, my Computer had Windows 7 and Ubuntu as a dual Boot.  I followed some online instructions on how to Delete Grub (Ubuntu's Startup Boot Menu) and Ubuntu Partitions (<edited>) and it worked.  I wanted to expand my remaining C and
    D Partitions, but I couldn't figure out how to do it. 
    Windows 7's Disk Management shows my Laptop's only Disk divided into 3 logical drives ( i.e., the Recovery Drive, C, and D Drives).  The Order of the Drives is Disk 0 is:
        1.46 GB - Recovery Drive
      53.71 GB - C Drive
      42.79 GB - Free Space
    191.19 GB - Drive for my Personal Data/Files
        8.93 GB - Unallocated
    NOTE:  The Free Space and D Drive have a Green Box around them.
    I would like to take the Free Space and Unallocated Space and apportion it between the C and D Drives., as stated prior, I'm not sure how to do this.  Do you have any reliable and
    preferably free options? 

    Hi Bobby Marlee,
    Please share us a screenshot about disk management.
    If my understanding is right, you want to extend the C and D drive by using the free space and unallocated space.
    If you want to use Disk Management to extend the drive space, I think we need to back up the files and delete Free Space, Drive for my Personal Data/Files, and then extend C: drive and create D: drive by using the Unallocated space.
    For more information, please refer to the following article.
    http://technet.microsoft.com/zh-cn/library/cc771473.aspx#BKMK_WINUI
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • How can i extend the customer  to other  sales area

    how can i extend the customer  to other  sales area

    Hello Harish,
      Once you have a customer (eg. 100002) in one sales area (eg. 0010/10/10), you open XD01 tcode, enter the same  customer number (100002) in customer field and enter sales area (say u want to create in 0020/10/10) in which you want to create the same customer. Now in Reference section, enter the customer number (100002) and sales area in which already the customer exists (0010/10/10). When you press enter, it allows you to modify the sales area data for the customer for new sales area.
    then save it.
    Hope it is clear...

  • How we can increase/ decrease the width of a HTML Region.

    Hi,
    I am having following 2 HTML regions defined.
    I am using Two Level Tabs with Sidebar
    Region1
    Type - HTML Text
    Template - Report region with 100% width
    sequence - 10
    column - 2Region2
    Type - HTML Text
    Template - Report region with 100% width
    sequence - 10
    column - 3 // only the column is different in this caseNow when I run the page, what I found that Region1 width is covering 75% of the Page and Region2 is covering only 5-10% of the page (right side)
    How can I reduce the width for region1 and increase the width of region2.
    Thanks,
    Deepak

    Deepak,
    This is typically done via CSS adjustments. Solutions are always very specific to the application. i'd be happy to take a look if you would please put an example up on apex.oracle.com. Provide the workspace/username/password. You can create a new account for this purpose.
    Regards,
    Dan
    Blog: http://DanielMcGhan.us/
    Work: http://SkillBuilders.com/

Maybe you are looking for