Can i facetime using my iphone 4s on my hdtv using 30 pin to hdmi cable

i would like to know is it possible to mirror facetime on my hdtv using my iPhone 4s with 30 pin to hdmi cable?

If you want a printer that prints directly from your iphone (Apple calls it airprint) these are the models.
http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/printers Shop around sites like Amazon usually have them much cheaper then the Apple store.

Similar Messages

  • Can a MacBook (Early 2008) Support both sound and video to 1080p HDTV by Mini-DVI to HDMI cable?

    Can a MacBook (Early 2008) Support both sound and video to 1080p HDTV by Mini-DVI to HDMI cable?

    The mini dvi on the MacBook will only support video, in order to get audio you'll need to a cable from the sound out port to the sound in port on the TV.

  • I have a 2011 i5 iMac and I am trying to connect it to my Samsung PS50C680 Plasma TV. I am using a MDP to HDMI cable and using HDMI 1 which is the correct input according to the manual. No matter which I turn on first the iMac still cannot connect.

    I have a 2011 i5 iMac and I am struggling to connect it to my Samsung PS50C680 Plasma TV. I am using a MDP to HDMI cable and using HDMI1 on the TV as shown in the manual. No matter which I turn on first etc the iMac cannot find the display and the TV shows no signal. Has anyone else had a similar problem? Any help would be appreciated.

    Hello, anabelleho. 
    Thank you for visiting Apple Support Communities.
    Here is a troubleshooting article that I would recommend going through when experiencing this issue.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Cheers,
    Jason H.

  • HT3382 why i can't listen from my tv when i connect my macbook air by airport/hdmi cable?

    why i can't listen from my tv when i connect my macbook air by airport/hdmi cable?
    but just when i try to open any website. itunes work normal

    Hi
    Does your Macbook support Airplay?    What year is it?  Typically mid 2011 and newer Macbooks offer Airplay capability.
    Cheers

  • Can't facetime using iPhone 4, help?

    I've changed between 2 chips and since I last changed chips, I can no longer FaceTime using my iPhone! It starts connecting then says connection failed... Very annoying, please help!

    Hi there,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    -Griff W.

  • Why can't I use a PIN for encryption?

    I had to do a factory restore in order to accept the 4.4.4 update. Since then, I have tried to encrypt my device. Previously, my device was encrypted with a PIN instead of a password. The instructions clearly state you can use a PIN or a password, but I am unable to select PIN from the list. Is this a 4.4.4 issue?

    That explains it thanks, just seemed odd that's all, I get it with apps as there may be copyright issues, but don't understand why it would apply to gift cards
    Thanks for taking the time to reply

  • Using Mini DisplayPort to HDMI cable

    Using a Mini DisplayPort to HDMI Cable from a 2010 MacBook Air is playing up, making it practically unusable. Essentially what happens is that when connecting a television set using a Mini DisplayPort to HDMI Cable the picture is perfect but no longer than 30 seconds at a time before the picture 'goes to sleep'. Is there a setting I need to change? There must be a setting that I can change which I haven't worked out yet. Thanks in advance for your help

    has there been an answer to this yet?

  • Connect to 2 external displays using 2 thunderbolt to hdmi cables

    I have a new iMac which has 2 thunderbolt ports.  I was told that I can add 2 displays using these ports with thunderbolt to hdmi cables.  However when I do this only one screen connects.  The other remains blank (and off).

    Hello, I wonder if HDMI isn't the problem?
    It's supposed to...
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600 (x2)
    Details:
    *This model can simultaneously support two external displays up to 2560x1600 via Thunderbolt.
    http://www.everymac.com/systems/apple/imac/specs/imac-core-i5-2.9-27-inch-alumin um-late-2012-specs.html
    Do the monitors have anything besides HDMI?

  • No Audio using Moshi mini display + HDMI cable

    Hi Guys,
    I now have video but no audio when connecting my macbook pro to my digital TV.  TV is Teac HDMI and using moshi mini-display and HDMI cable.

    How old is your MBP?  MBP's early than mid-2010 do not support audio through the mini-displayport.

  • Cannot get hdmi viewsonic monitor to work using dvi-d to hdmi cable

    Late 2008 17 inch Macbook Pro...OS X 10.6.8.   Screen stays blank no matter what I do..mirror display or not...Only works when I use dvi-d to VGA adaptor.  Is there anyway to hook it up using HDMI ??

    Recommend checking this Toshiba document.
    +*Is it possible to use two external monitors on a Qosmio X500?*+
    http://aps2.toshiba-tro.de/kb0/TSB13033Y0000R01.htm
    Yes, it is possible.
    Connect the VGA and the HDMI monitor to the related connectors. Now you can use the key combination FN + F5 to activate both monitors.
    Choose "HDMI + CRT Extended Desktop". The internal display will turn of.
    Note: All three displays (two external and the internal one) can not be activated simultaneously.

  • I want to use my Ipad1 with hdmi cable and keynote.

    I bought HDMI connector and keynote to use for presentations.
    I was led to believe that this would work with IPad 1.
    I know IPad 1 will not do screen mirroring. I just want to do presentations
    Do I need to get a refund?
    Thanks

    A search of the forum produced this thread (among others):
    https://discussions.apple.com/message/12290316#12290316

  • Vizio hdtv via VGA to HDMI cable - can't get correct resolution

    I'm trying to configure the resolution for a Vizio va22lfhdtv10t on a Mini. When I used a DVI to VGA adapter the resolution was very good at 1920*1080. Now that I'm using a DVI to HDMI cable it defaults to 1080p with 30hz refresh. Font resolution is terrible on this setting and only marginally better when trying the other resolution options. I have seen some posts about creating a custom resolution, but don't know how to do this, or if there is a danger of damaging the LCD with improper settings. Has anyone gotten this HDTV to work other than as a VGA display?
    Thanks!

    1920 x 1080 is the native resolution, so (a) I wouldn't try any other resolution, and (b) I'd ONLY use a digital input (HDMI).
    If you're getting crummy unsharp pictures, it sounds as if the TV's scaler is working. You need to look for a menu setting (on the TV) to turn off the scaler. It might be called something like "1:1 pixel" mapping, or "overscan OFF" or some thing similar.
    I see on the manual p.35:
    +4. Wide - The Wide option lets you determine how the image appears on the screen. Select Normal, Wide, or Panoramic.+
    Try those three. My guess is you want "wide" mode for a 1920x1080 feed.
    Also, H and V size and position can be adjusted (p.35/36) - maybe that will help?

  • My computer will not display my movies on to my tv using a hdmi cable what am i doing wrong

    my computer will not display using the fire wire / hdmi cable what am i doing wrong

    Hi b,
    Video does not play via the FW port. Which MBP do you have and I can help you get the right adapter.

  • Using the mini DVI - DVI cable with HDMI LCD screen?

    Hi,
    I bought the apple mini DVI - DVI connector to connect my imac to the back of my plasma. I have a 3 meter DVI cable to extend the mini DVI - DVI connector.
    It worked fine but the plasma is not so good for my purposes as i am using the set up to display images.
    I have just bought an LG LCD TV for a very good price.
    However the LG LCD does not have DVI socket! It has HDMI.
    Is there a cable available that is DVI (female) - HDMI?
    And will this work in theory?
    Any advise is much appreciated...
    Thanks

    Dieop wrote:
    Hi Network 23,
    Im not sure what you mean exactly?
    Which adapters and cables are you using between TV and Mac?
    My PowerBook and MacBook Pro have a DVI port, so I start there. I guess you're starting from the DVI port at the end of your adapter cable. At this point we both start from a standard DVI port.
    From there I attach the DVI-HDMI adapter I linked to earlier, and then between that and the HDMI port on the TV, I use a simple, inexpensive HDMI cable also bought at monoprice.com. While you could also use a DVI-HDMI cable, I chose to use a DVI-HDMI adapter so that I could use standard HDMI cables, since I anticipate buying more HDMI components in the future.

  • TS4185 i am using the same apple id for facetime in my iphone and mac. now, only my iphone can receive and make facetime calls. why can't facetime calls in my mac get through?

    i am using one apple id for facetime in my iphone and mac. my phone is able to receive and make calls while my mac is not able to do both. what is the problem.

    thanks.  your answer was correct, clearer.  I have another question, maybe you can answer.  I just purchase my ipad2 2 days ago.  yesterday, there was a sound.  today there is no sound.  there is a sound only in movies and you tube and music.  but no sound on all apps and keyboards.  I look it up and seems like ther are few that have this problem.  I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that.  I tried rebooting it and still won't work.  Should I just restore it?

Maybe you are looking for

  • Compiz and kde kicker panel

    Hello, I am having a problem using compiz with kde's kicker panel.  I have my kicker set on auto-hide and when I enable the option in CCSM "unredirect fullscreen windows" my screen flickers when the kicker panels is raised.   This problem dissapears

  • Exit or BADI for PO lines consolidation

    Hi experts, I have this requirement from one customer: They want a user-exit or BADI that consolidates to lines from a PO. It should work like this: if you add a position with a material number that is already in another position, the exit should add

  • Can I retrieve photos burned onto DVD (I used iDVD)?

    I lost my hard drive last week and am in the process of rebuilding my photo gallery. In Decemeber, I burned a DVD with all of my desired photos from 2012 using iDVD. In addition to the videos and slideshows that I included in the main menu, I made su

  • Installing Docucment Management System

    HI Experts: I would like to know what is required to get a DMS solutuon working. We already have a ECC 6.00 in our environment.  We are not planning on using Easy DMS. What are the steps reqiured to get this thing working? What do we need to install?

  • HT204266 How do i cancel my movie purchased when it stil downloading?

    Hi there...if anyone could help me and tell me how to cancel my purchased for movie when it still downloading....now i paused the download..the bill only charged when the movie is fully download isn't? Can someone tell me what to do...