Can I filter by value which is not displayed in grid columns?

In excel it is possible to filter by value of measure which is not displayed in the report.
How can I possibly do this in Performance Point Grid? (in filter by value there I only see the measures in columns).
Please advise
Namnami

I found it is possible to filter by value by changing the MDX in the query tab.
(I filtered by certain existing value in design, then switched to Query and changed to the measure which is not displayed). I shows up correctly.
The problem is, once I change the query, I get an error when tring to connect a filter on a grid column:
"consumer parameter no-longer exists in the consumer webpart"
The grid looks "frozen"- cannot drill up / down etc.
How can I filter by value which is not displayed without loosing the ability to attach a filter to the grid?
Namnami

Similar Messages

How can I choose data objects which is not displayed

hi.
I want to migrate setup data that like as lookups, value set values, users, responsibilities and so on.
but can not find them in list of data objects.
az_apis table has all of these list. but why can't see them.
'iSetup user's guide' guides that it is possible to migrate them. but i don't know how to do.
plz give me the way.
thanks a lot.

# When we configure webserver, we define a port (in your case 8345).
# If an user connects to the webserver at that port (i.e. 8345), it redirects the request to underlying manage servers of WLS domain, depending on the algorithm and the list mentioned in conf file of webserver (obj.conf)
# now if you have already configured a virtual host, that is listening on 80 port, and your client/user directly hits it, they will get the application running.
it is very similar like ---> if you have two Manage servers MS1 and MS2 running on 7001 and 7002 respectively, and you have webserver configured, the client have two choice. Either directly hit the manage servers or hit the webserver. (Here the obvious question is that client should know the manage server ports and ip)
(I am sorry, iincase I have misunderstood your question, if so could you please re describe the question.)

I want to download firefox 4.0 but can only get 5.0 which will not work with my corporate firewall. How can I download FF4.0?

I need to download FF4.0 to get through my corporate firewall. All I can download is FF5.0 which will not work. How can I download FF4.0?

#A link to Firefox 4 versions will not be offered by any '''''responsible''''' contributor here, because Firefox 4 versions contain stability and security issues <u>that will not be corrected</u>. Firefox 4 is a thing of the past.
#The only currently supported versions that a '''''responsible''''' contributor here will offer are Firefox 5 and Firefox 3.6.18. Firefox 3.6.18 is currently scheduled for support for only 2-3 more months, then it, too, will be a thing of the past. Firefox 6 will probably be introduced about the time the Firefox 3.6.18 support is discontinued.
#To downgrade to Firefox 3.6.18, follow these instructions '''''very carefully''''':
#*Back up your personal information (bookmarks, passwords, etc.) before proceeding just in case something goes wrong: https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
#**'''''If you need to''''', see the following article. See the last 2 sections "Copying files between profile folders" and "Your important data and their files" to restore important information '''''if something goes wrong in the downgrade''''': https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
#*Download and SAVE Firefox 3.6.18 to your Desktop, then proceed as in the "Clean re-install" article below: https://www.mozilla.com/en-US/firefox/all-older.html
#*Clean re-install: http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
#*You may also need to reset your extension databases in your profile folder. Do the procedure after locating your profile folder (see "Back up your personal information" above) and closing Firefox. The files will be automatically re-built when you re-start Firefox: http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Corrupt_extension_files

How can I find the profiles which are not in a role

Hi all,
how can I find all profiles which are not used in a role. Its important for a security check.

Hi Stefan,
you do one thing use the transaction SUIM
SUIM>>Profile>>By Roles
give all the role name and execute you will get roles with profiles
and extract to excel sheet
to get only profiles
suim>>profile>>by profile name or text give * and execute
and extract in excel sheet no compate profile coloumns get the profiles which does not there in any roles
hope ds helps
thanks
kishore

After installing an SSD into my optical bay, I've found out I need EFI Firmware Update 2.2. I can only find 2.3 which is not supported on my Mac. What can I do?

After installing an SSD into my optical bay, I've found out I need EFI Firmware Update 2.2. I can only find 2.3 which is not supported on my Mac. What can I do?

You do not want EFI 2.2, it bricked many 2011 MacBook Pro machines.
EFI 2.3 is the fix. Software Update should install it if you need it, but it goes to the boot drive as that's where the hidden EFI resides.
Check out this link of machines and their EFI versions
https://support.apple.com/kb/HT1237
Also if your SSD should be in the hard drive bay as it makes a better boot/applicaitions drive, not a good storage drive as it wears out with repeated use and is not "scrubbable" like a regular hard drive
The hard drive should be in the optical bay and used as a storage drive, you have things all messed up inside your machine, Apple doesn't support or expect the optical drive to be used as such to begin with, then as a boot drive is just asking for trouble. So use the optical bay as storage and not as a boot bay.
Also you can't install OS X or Windows or use a Firmware restore disk because it only works from a internal optical drive, which you have removed.
https://support.apple.com/kb/HT2213
You need to learn all about cloning etc., as you have no other means to boot the machine.
https://discussions.apple.com/message/16276201#16276201

How can we find delivery documents which are not goods issued?

Hi All,
How can we find delivery documents which are not goods issued?
Thanks in advance

hi,
please check in VL06O.
there will be plenty of options on the same.
you are requested togo for push button FOR GOODS ISSUE from there u will go to VL06G only
your requrient will be satisfied.
regards,
balajia
Edited by: balaji timmampalli achari on Nov 11, 2010 12:39 PM
Edited by: balaji timmampalli achari on Nov 11, 2010 12:40 PM

How exclude multiple values which are not in sequence ( range )

Hi Abapers,
My Requiremnt is to exclude multiple values which are not in sequence in selection screen.
I want to restrict some values .
please provide sample code.
thanks & regards,
Hari priya

SELECT-OPTIONS : s_matnr FOR mara-matnr.
INITILIZATION.
s_matnr-sign = 'E'. " E means Excluding.
s_matnr-option = 'EQ'.
s_matnr-low = '1000'.
append s_matnr.
s_matnr-sign = 'E'.
s_matnr-option = 'EQ'.
s_matnr-low = '1500'.
append s_matnr.
s_matnr-sign = 'E'.
s_matnr-option = 'BT'.
s_matnr-low = '2000'.
s_matnr-high = '3000'.
append s_matnr.
START_OF_SELECTION.
SELECT * FROM MARA INTO TABLE itab WHERE mara IN s_matnr.
the above s_matnr has values 1000,1500, 2000 - 3000.
so the above code fetches all the values excluding 1000,1500 and between 2000 and 3000.
Regards
Bala Krishna

Weird exception in 12c (ORA-01461: can bind a LONG value only for insert into a LONG column)

I have a Windows app that accesses an Oracle 12c database via ODBC (the driver version is 12.01.00.01).
I have a table that has a key column named REGION_ID (NVARCHAR2(9)), and about a dozen other columns, three of which are named REGION1, REGION2, and REGION3, all of type NVARCHAR2(40).
When I try to insert a string into the REGION1 field that's greater than 9 characters (the length of REGION_ID), I get an ORA-01461 error ('Can bind a LONG value only for insert into a LONG column). If I define the length of REGION_ID to be NVARCHAR2(15), then I can add strings to the REGION1 field with a length up to 15 before I get the ORA-01461 exception again. Oddly, if I change the REGION1 column name to REGIONONE, I do not get any errors, and everything works fine. It's almost as if the column name REGION1 is being confused with REGION_ID behind the scenes.
Any ideas? I’m using SQLBindParameter to bind the columns, and all of the calls succeed. I get the exception when I execute the insert statement. This same code worked for previous versions of Oracle (11g, 10g, and 9i). And if I use an 11g client driver against the 12c server, I do not get the exception.
Thanks!

Sorry, I was just now able to install the patch for bug 18232462, and it did indeed solve the issue I described above. Thanks!

Error ORA-01461: can bind a LONG value only for insert into a LONG column

Within an existing application , i need to create a new report , i created a new page in it and then tried to create classic report , during wizard when i enter the same query which i have used for previous page , it gives me following error during the creation of report.
The following bind variable i have already used for previous page. I want to reuse the same bind variables. There is no any long dataype within column predicates.
Error ORA-01461: can bind a LONG value only for insert into a LONG column
OK
Following is the query
SELECT
   "VWSR_ALL_MERGED_DATA_MV"."SR_AREA" "SR_AREA",
   "VWSR_ALL_MERGED_DATA_MV"."SR_STATUS" "SR_STATUS",
   "VWSR_ALL_MERGED_DATA_MV"."SR_SUB_STATUS" "SR_SUB_STATUS",
   "VWSR_ALL_MERGED_DATA_MV"."SR_DATE_CREATED" "SR_DATE_CREATED",
   "VWSR_ALL_MERGED_DATA_MV"."SR_OPEN_DATE" "SR_OPEN_DATE",
   "VWSR_ALL_MERGED_DATA_MV"."SR_CLOSED_DATE" "SR_CLOSED_DATE",
   "VWSR_ALL_MERGED_DATA_MV"."SR_PRODUCT1" "SR_PRODUCT1",
   "VWSR_ALL_MERGED_DATA_MV"."SR_PRODUCT2" "SR_PRODUCT2",
   "VWSR_ALL_MERGED_DATA_MV"."SR_TIO_PRIORITY" "SR_TIO_PRIORITY",
   "VWSR_ALL_MERGED_DATA_MV"."SR_REF_NUMBER" "SR_REF_NUMBER",
   "VWSR_ALL_MERGED_DATA_MV"."SR_DATE_RECD" "SR_DATE_RECD",
   "VWSR_ALL_MERGED_DATA_MV"."SR_CIDN" "SR_CIDN",
   "VWSR_ALL_MERGED_DATA_MV"."SR_BUS_UNIT" "SR_BUS_UNIT",
   "VWSR_ALL_MERGED_DATA_MV"."SR_NUMBER" "SR_NUMBER",
   "VWSR_ALL_MERGED_DATA_MV"."SOURCE_SYSTEM" "SOURCE_SYSTEM",
   "VWSR_ALL_MERGED_DATA_MV"."BATCH_ID" "BATCH_ID"
FROM VWSR_ALL_MERGED_DATA_MV
WHERE trunc(VWSR_ALL_MERGED_DATA_MV.SR_DATE_RECD)=trunc(sysdate-1)
AND VWSR_ALL_MERGED_DATA_MV.SR_TIO_PRIORITY IN
                                                :P2_SR_TIO_PRIORITY
                                               ,'CEO'
                                               ,'TER'
                                               ,'Priority Assistance'
                                               ,'Enquiry'
AND   (
        (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN
                                     'Business Support and Improvement'
                                   , 'Finance and Administration'
                                   , 'Cust Sat Simplification and Productivity'
                                   , 'Project New and Customer Experience'
                                   , 'Corp Strategy and Customer Experience'
                                   , 'Other'
            AND :P2_SR_BUSINESS_UNIT= htf.escape_sc('BS&I'))
   OR   (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN
                                     'Consumer'
                                   , 'Consumer Telstra Country Wide'
                                   , 'Customer Service and Sales'
                                   , 'Offshore Sales and Service'
                                   , 'TC and TCW Operations'
                                   , 'Telstra Country Wide'
                                   , 'Other'
            AND :P2_SR_BUSINESS_UNIT= htf.escape_sc('TC&C'))
   OR   (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN
                         'Telstra Customer Sales and Service'
                        ,'Telstra Program Office'
                        ,'Human Resources'
                        ,'IT'
                        ,'Unallocated'
                        ,'Other'
            AND :P2_SR_BUSINESS_UNIT= 'OTHER')
   OR (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN
                    'Telstra Operations'
                   ,'Telstra Networks and Services'
                   ,'Other'
            AND :P2_SR_BUSINESS_UNIT= 'TO')
   OR (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN
                  'Telstra Business'
            AND :P2_SR_BUSINESS_UNIT= 'TB')
   OR (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN
                  'Telstra Wholesale'
            AND :P2_SR_BUSINESS_UNIT= 'TW')
   OR (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN
                  'Telstra Enterprise and Government'
            AND :P2_SR_BUSINESS_UNIT= htf.escape_sc('TE&G'))
   OR (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN
                  'Sensis'
                 ,'Sensis Pty Ltd'
            AND :P2_SR_BUSINESS_UNIT= 'SENSIS')
AND :P2_SR_TIO_PRIORITY = 'Level 0'
UNION
SELECT
   "VWSR_ALL_MERGED_DATA_MV"."SR_AREA" "SR_AREA",
   "VWSR_ALL_MERGED_DATA_MV"."SR_STATUS" "SR_STATUS",
   "VWSR_ALL_MERGED_DATA_MV"."SR_SUB_STATUS" "SR_SUB_STATUS",
   "VWSR_ALL_MERGED_DATA_MV"."SR_DATE_CREATED" "SR_DATE_CREATED",
   "VWSR_ALL_MERGED_DATA_MV"."SR_OPEN_DATE" "SR_OPEN_DATE",
   "VWSR_ALL_MERGED_DATA_MV"."SR_CLOSED_DATE" "SR_CLOSED_DATE",
   "VWSR_ALL_MERGED_DATA_MV"."SR_PRODUCT1" "SR_PRODUCT1",
   "VWSR_ALL_MERGED_DATA_MV"."SR_PRODUCT2" "SR_PRODUCT2",
   "VWSR_ALL_MERGED_DATA_MV"."SR_TIO_PRIORITY" "SR_TIO_PRIORITY",
   "VWSR_ALL_MERGED_DATA_MV"."SR_REF_NUMBER" "SR_REF_NUMBER",
   "VWSR_ALL_MERGED_DATA_MV"."SR_DATE_RECD" "SR_DATE_RECD",
   "VWSR_ALL_MERGED_DATA_MV"."SR_CIDN" "SR_CIDN",
   "VWSR_ALL_MERGED_DATA_MV"."SR_BUS_UNIT" "SR_BUS_UNIT",
   "VWSR_ALL_MERGED_DATA_MV"."SR_NUMBER" "SR_NUMBER",
   "VWSR_ALL_MERGED_DATA_MV"."SOURCE_SYSTEM" "SOURCE_SYSTEM",
   "VWSR_ALL_MERGED_DATA_MV"."BATCH_ID" "BATCH_ID"
FROM
   VWSR_ALL_MERGED_DATA_MV
WHERE trunc(VWSR_ALL_MERGED_DATA_MV.SR_DATE_RECD)=trunc(sysdate-1)
   and VWSR_ALL_MERGED_DATA_MV.SR_TIO_PRIORITY IN (:P2_SR_TIO_PRIORITY)
AND (
     (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN (
                     'Business Support and Improvement'
                   , 'Finance and Administration'
                   , 'Cust Sat Simplification and Productivity'
                   , 'Project New and Customer Experience'
                   , 'Corp Strategy and Customer Experience'
                   , 'Other'
AND :P2_SR_BUSINESS_UNIT= htf.escape_sc('BS&I'))
OR (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN (
                     'Consumer'
                   , 'Consumer Telstra Country Wide'
                   , 'Customer Service and Sales'
                   , 'Offshore Sales and Service'
                   , 'TC and TCW Operations'
                   , 'Telstra Country Wide'
                   , 'Other')
AND :P2_SR_BUSINESS_UNIT= htf.escape_sc('TC&C'))
OR (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN
                         'Telstra Customer Sales and Service'
                        ,'Telstra Program Office'
                        ,'Human Resources'
                        ,'IT'
                        ,'Unallocated'
                        ,'Other'
        AND :P2_SR_BUSINESS_UNIT= 'OTHER')
OR (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN
                      'Telstra Operations'
                      ,'Telstra Networks and Services'
                      ,'Other'
        AND :P2_SR_BUSINESS_UNIT= 'TO')
OR (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN
                     'Telstra Business'
        AND :P2_SR_BUSINESS_UNIT= 'TB')
   OR (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN
                  'Telstra Wholesale'
        AND :P2_SR_BUSINESS_UNIT= 'TW')
   OR (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN
                  'Telstra Enterprise and Government'
        AND :P2_SR_BUSINESS_UNIT= htf.escape_sc('TE&G'))
   OR (VWSR_ALL_MERGED_DATA_MV.SR_BUS_UNIT IN
                  'Sensis'
                 ,'Sensis Pty Ltd'
        AND :P2_SR_BUSINESS_UNIT= 'SENSIS')
AND :P2_SR_TIO_PRIORITY = 'Level 1'Edited by: user13653962 on 30/01/2013 15:11
Edited by: user13653962 on 30/01/2013 15:14

You have an error in the code:
1. you don't provide a value for 'what' - you have to tell Oracle what it should execute when it submits the job.
And remember - with ISUBMIT the next_date parameter has datatype VARCHAR2 - SUBMIT uses datatype DATE. So make sure you provide a VARCHAR2 value and do not rely on implicit conversion.
>
PROCEDURE DBMS_JOB.ISUBMIT
(job IN BINARY_INTEGER
,what IN VARCHAR2
,next_date IN VARCHAR2
,interval IN VARCHAR2 DEFAULT 'null'
,no_parse IN BOOLEAN DEFAULT FALSE);
PROCEDURE DBMS_JOB.SUBMIT
(job OUT BINARY_INTEGER
,what IN VARCHAR2
,next_date IN DATE DEFAULT SYSDATE
,interval IN VARCHAR2 DEFAULT 'null'
,no_parse IN BOOLEAN DEFAULT FALSE);

ORA-01461: can bind a LONG value only for insert into a LONG column in 11.2

Hello,
We have been getting the following exception when we try to save an XML (>5k).
SQL state [72000]; error code [1461]; ORA-01461: can bind a LONG value only for insert into a LONG column
This is occurring only for Oracle 11g (11.2.0.1.0)
Our column is CLOB type, not LONG type.
Could anyone please suggest what could be the reason and fix?
Thanks in advance
--Cheers
paruvid

Thanks for quick response!!
Inserting throw JDBC (Spring jdbcTemplate)
using the ojdbc6.jar as driver
here is the stask strace
Caused by: org.springframework.jdbc.UncategorizedSQLException: PreparedStatementCallback; uncategorized SQLException for SQL [INSERT INTO tabl1(c1, c2, c3, c4, c5, c6, c7, c8, c9, c10, c11, c12, c13, c14, c15,c16(CLOBCOL),c17, c18, c19) SELECT c1,c2, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ? FROM table2 S JOIN table1 D ON S.c1 = D.c1 WHERE S.c2 = ? AND D.c5 = ? GROUP BY S.c1];
SQL state [72000]; error code [1461]; ORA-01461: can bind a LONG value only for insert into a LONG column
; nested exception is java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
at org.springframework.jdbc.support.AbstractFallbackSQLExceptionTranslator.translate(AbstractFallbackSQLExceptionTranslator.java:83)
at org.springframework.jdbc.support.AbstractFallbackSQLExceptionTranslator.translate(AbstractFallbackSQLExceptionTranslator.java:80)
at org.springframework.jdbc.support.AbstractFallbackSQLExceptionTranslator.translate(AbstractFallbackSQLExceptionTranslator.java:80)
at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:602)
at org.springframework.jdbc.core.JdbcTemplate.update(JdbcTemplate.java:786)
at org.springframework.jdbc.core.JdbcTemplate.update(JdbcTemplate.java:842)
at org.springframework.jdbc.core.JdbcTemplate.update(JdbcTemplate.java:846)
at com.smartstream.cms.message.dao.SSIMessageDao.editSSIInstance(SSIMessageDao.java:522)
... 52 more
Caused by: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
Edited by: paruvid on Aug 9, 2011 5:07 AM
Edited by: paruvid on Aug 9, 2011 5:17 AM
Edited by: paruvid on Aug 9, 2011 5:23 AM

ORA-01461: can bind a LONG value only for insert into a LONG column - Issue

We are getting an error from Oracle DB --- Cause: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
The application was working fine with Oracle 10.2.0.4 and ojbc14 driver 10.2.0.1 Error occurs only after an upgrade to Oracle 10g 10.2.0.5. So after some googling, we found that a driver upgrade would eliminate this error. So the 10.2.0.5 version of the driver was used. But the ORA error still occurs. The readme of ojdb14.jar specified this - BUG 8847022 - ORA-01461: CAN BIND A LONG VALUE ONLY FOR INSERT INTO A LONG COLUMN
The problem is that we are not able to reproduce this using a sample program however it is happening consistently in the client environment.
we get the error ORA-01461, when the oracle version is upgraded to 10.2.0.5. This error occurs when we try to insert a file(BLOB) data with the file length greater than 4KB to a table.
Exception trace
uncategorized SQLException for SQL []; SQL state [72000]; error code [1461];
--- The error occurred in nl/sss/gict/mcb/data/dao/config/StateQueries.xml.
--- The error occurred while applying a parameter map.
--- Check the setReceivedFile-InlineParameterMap.
--- Check the statement (update failed).
--- Cause: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
; nested exception is com.ibatis.common.jdbc.exception.NestedSQLException:
--- The error occurred in nl/sss/gict/mcb/data/dao/config/StateQueries.xml.
--- The error occurred while applying a parameter map.
--- Check the setReceivedFile-InlineParameterMap.
--- Check the statement (update failed).
--- Cause: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
Oracle version installed in acceptance:
1 Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
2 PL/SQL Release 10.2.0.5.0 - Production
3 CORE 10.2.0.5.0 Production
4 TNS for Linux: Version 10.2.0.5.0 - Production
5 NLSRTL Version 10.2.0.5.0 - Production

Is the server running Java 1.4? If it is Java 5 or higher there is no need to keep using OJDBC14, you can upgrade to OJDBC5.
If you cannot do that, then I ask you: why make this post? What are you expecting someone to do? Your problem is with the OJDBC driver, you are not going to get tech support for it in this Java programming forum.

Can bind a LONG value only for insert into a LONG column

I got an exception when I was using sesame adapter to dump a turtle file which contains long texts as objects into oracle semantic database. The exception information is:
org.openrdf.repository.RepositoryException: org.openrdf.sail.SailException: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
ORA-06512: in "SF.ORACLE_ORARDF_ADDHELPER", line 1
ORA-06512: in line 1
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
     at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:202)
     at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3530)
     at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4735)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1350)
     at oracle.spatial.rdf.client.sesame.OracleSailConnection.addStatement(OracleSailConnection.java:1976)
     at org.openrdf.repository.sail.SailRepositoryConnection.addWithoutCommit(SailRepositoryConnection.java:249)
     at org.openrdf.repository.base.RepositoryConnectionBase.add(RepositoryConnectionBase.java:510)
     at org.openrdf.repository.util.RDFInserter.handleStatement(RDFInserter.java:193)
     at org.openrdf.rio.turtle.TurtleParser.reportStatement(TurtleParser.java:963)
     at org.openrdf.rio.turtle.TurtleParser.parseObject(TurtleParser.java:416)
     at org.openrdf.rio.turtle.TurtleParser.parseObjectList(TurtleParser.java:339)
     at org.openrdf.rio.turtle.TurtleParser.parsePredicateObjectList(TurtleParser.java:315)
     at org.openrdf.rio.turtle.TurtleParser.parseTriples(TurtleParser.java:301)
     at org.openrdf.rio.turtle.TurtleParser.parseStatement(TurtleParser.java:208)
     at org.openrdf.rio.turtle.TurtleParser.parse(TurtleParser.java:186)
     at org.openrdf.rio.turtle.TurtleParser.parse(TurtleParser.java:131)
     at org.openrdf.repository.base.RepositoryConnectionBase.addInputStreamOrReader(RepositoryConnectionBase.java:404)
     at org.openrdf.repository.base.RepositoryConnectionBase.add(RepositoryConnectionBase.java:295)
     at org.openrdf.repository.base.RepositoryConnectionBase.add(RepositoryConnectionBase.java:226)
     at sforcl.dao.support.OracleSailDaoTemplate.addTTLFile(OracleSailDaoTemplate.java:114)
     at sforcl.test.OracleSailDaoTemplateTest.testAddTTLFile(OracleSailDaoTemplateTest.java:33)
     at sforcl.test.OracleSailDaoTemplateTest.main(OracleSailDaoTemplateTest.java:122)
How can I solve this problem?

Hi,
Can you please try loading the same file following Example 5 in Section 8.10.5 of
http://docs.oracle.com/cd/E11882_01/appdev.112/e25609/sem_sesame.htm
Thanks,
Zhe

Ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

No on the book title, no problem there.
The issue is: my book pages appear as on white paper, no background that resembles a open book and also no option to change fonts. The book was created in iBooks author, there was a problem going with the "Publish" menu route so I was instructed my Apple to "export" the file and submit that. I think that's the problem after reading that iBooks author is a hybrid epub file.
Thanks for getting back to me.

ORA-01461: can bind a LONG value only for insert into a LONG column ORA-020

Getting error --
ORA-01461: can bind a LONG value only for insert into a LONG column ORA-02063: preceding line from APPS
A page has 3 fields and a Add button
(1) first field is a LOV "select with submit"
(2) second field is getting its value from select statement with where clause = ID selected from field1
(3) field 3 is the value of field1
In After submit Process , I write simple insert as follows in the
BEGIn
INSERT INTO TABLE_NAME (ELEMENT_NAME,ELEMENT_TYPE_ID )
VALUES (:P3_NAME ,to_number(:P3_ELEMENT_TYPE_ID));
COMMIT;
END;
when i click on Add i get the error above

try doing the bind locally before executing the remote dml...
declare
l_long long := :P3_NAME;
begin
insert into table_name (ELEMENT_NAME,ELEMENT_TYPE_ID )
values (l_long ,to_number(:P3_ELEMENT_TYPE_ID));
end;
...and if that doesn't work, please let us know the definition of you TABLE_NAME table.
thanks,
raj

ORA-01461: can bind a LONG value only for insert into a LONG column error

Oracle 11g R1 RHEL 5 64bit (Apex 3.1)
Hi all,
I am having a tough time with this error:
ORA-01461: can bind a LONG value only for insert into a LONG column
ORA-06512: at "FPRCHR.PKG_TRIGGER_EMAIL", line 39
ORA-06512: at "ISWRNEW.PKG_NOTIFICATION", line 310
ORA-06512: at "ISWRNEW.PKG_NOTIFICATION", line 1745
ORA-06512: at line 1
The FPRCHR.PKG_TRIGGER_EMAIL looks like follows:
INSERT INTO fprchr.trigger_email
(trigger_email_rid,
email_to,
email_from,
email_body,
email_subject,
email_cc,
email_bcc,
mime_type,
email_priority
VALUES (l_job,
p_recipients,
p_sender,
p_message,
p_subject,
p_cc,
p_bcc,
p_mime_type,
p_priority
execute immediate 'alter session set events ''10046 trace name context off''';
END submit;
It seems like the characters have exceeded the limit that VARCHAR2 can handle? What other data type could I change the fprchr.trigger_email table to? Is that all that is needed?
Thanks.

It seems like the characters have exceeded the limit that VARCHAR2 can handle? What other data type could I change the fprchr.trigger_email table to? Is that all that is needed?
Did you try with clob data type?
Regards.
Satyaki De

Can I filter by value which is not displayed in grid columns?

Similar Messages

Maybe you are looking for