Can I find out the date that a video was taken?

I am wanting to put all my videos from my iphone of my daughters first years onto a DVD, I would like to mark the dates for each one.  How do I find out what the dates of each video or picture are?

Thanks so much for your reply King_Penguin. No, sadly there is not indication of the expected release date on the film, it's no where to be found. I have also tried to look in other places online, but no luck. I guess your latter statement jives more with my situation, that  being the studio/rights-holder hasn't feel inclined to provide the date.

Similar Messages

  • How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

    How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

    Thanks so much for your reply King_Penguin. No, sadly there is not indication of the expected release date on the film, it's no where to be found. I have also tried to look in other places online, but no luck. I guess your latter statement jives more with my situation, that  being the studio/rights-holder hasn't feel inclined to provide the date.

  • Can we find out the date/time when the datafile last extended?

    Hello all,
    Can we find out the date/time when the datafile last extended?
    Is it possible to find out from the alert.log file?
    Correct me if I am worng?
    Thanks in advance
    Himanshu

    In continuation with the earlier post, can you tell me what sort of entry should be search if the above information is available in the alert.log file?
    Thanks
    Himanshu

  • HT1414 How can i find out the last time my iphone was restored?

    Hey, i need help on how to find out when the last few times my iphone was restored.
    Thanks

    This is a strange question, not sure where you are going with this one. On the computer you Restored with, iTunes requests to back up the iPhone. These are time stamped and stored on the computer. You can use iTunes to search the list of back ups of your iPhone and see the dates, so you can at least see the dates of the back ups.

  • How can I find out  the strings that will be presented to the UI

    Hi All,
    I am working on a Swing based application (Swing based UI)
    I am requested to do the following on the bytecode of that application:
    I am supposed to find out what strings from within that bytecode will be presented to the UI and what will be used for an internal usage.
    i have no way of running the application to verify that, i can only work on the static bytecode files.
    hard question ha?
    Thanks,
    EItan.

    You would of course have to run it. Either via a VM or recreating a VM yourself.
    As an example of that how would you figure out what string occurs in the following (pseudo) code?
    String msg = (cnt > 1) ? ("files=" + cnt) : ("file=" + cnt);
    if (cnt > 1) DisplayMessage(msg);

  • How can I find out the date of manufacture for any particular iPod?

    I suppose the Subject Title says it all really!
    Someone told me that there was a website that list codes but I cannot find it anywhere.
    Any advice would be greatly appreciated.

    http://www.chipmunk.nl/klantenservice/applemodel.html

  • How can I find out my data usage for the past 3 months?

    Greetings all, I have been a long time Verizon customer, and as such I, along with my husband, was grandfathered into the unlimited data plan. When I last spoke to a representative, they informed me that the only way we were going to be able to keep our unlimited data was by paying the full retail price ($600+) to get a new phone. So we were considering upgrading and changing to one of the newer data plans so we could still get the discounted price on the new phone, but I would like to make sure I choose one with enough data, without paying for a bunch of data that I don't use, however MyVerizon only shows me the amount I have used since the start of the billing cycle. Is there a way to find out the data usage for both my husband and myself for the last 3 months so I can choose the right option?
    Thanks in advance for your help!

        Hello sweetpea1221! How exciting that you're considering upgrading with us. mrhelper is helpful, indeed. You can view your data usage for each line under the View Bill option via your My Verizon account. You can also view your 3 month average  data usage with our Account Analysis feature. Here's a link that will be helpful in doing so http://bit.ly/vnLjqO. I'm confident that we have a great plan to match your data needs. Please let us know if you have further questions.
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

  • How can you find out if another VI running on the same computer and how can you find out the name of that VI?

    Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
    If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone? 

    I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them.  I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
    I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory.  I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods.  [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
    I think you could adopt this idea to do what you need.
    BS

  • How can i find out the height lenght width of that logo in so10 ?

    I have TextName is there in so10.
    How can i find out the height lenght width of that logo ?

    Hi Sam,
    In SE80, you should have a Repository for MIMES, including images.You should find your image here .
    you have to use the following method to get the image as a binary string and then use gui_download to download it to local system
    call method cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
    exporting
    p_object = fs_stxbitmaps-tdobject
    p_name = fs_stxbitmaps-tdname
    p_id = fs_stxbitmaps-tdid
    p_btype = fs_stxbitmaps-tdbtype
    receiving
    p_bmp = loc_graphic_xstr
    exceptions
    not_found = 1
    others = 2.
    Thn you can find the size of the logo.
    Regards
    Naresh

  • HT201303 How can I find out the ip address that logged into my account?

    How can I find out the ip address that logged into my account?

    Open Airport Utility. You should find it in there under the Internet tab.

  • I have lost my Iphone and never activated my Icloud on my phone.  Is there anyway of locating it whereabouts???  Also Who ever has my phone has downloaded find my phone.  Is there anyway Apple can find out the address that was downloaded from??

    I have lost my Iphone and never activated my Icloud on my phone.  Is there anyway of locating it whereabouts???  Also Who ever has my phone has downloaded find my phone.  Is there anyway Apple can find out the address that was downloaded from??

    Unfortuantely, you can only track the phone if you had set up iCloud and enabled Find My iPhone on it before it was lost or stolen.  I don't believe there is anything that Apple can do to locate your phone either.

  • I purchased an itunes gift card for my nephew. I received a confirmation that the credit card had been debited, however he never received a code to activate his gift. Where can I find out the code for my gift voucher?

    I purchased an itunes gift card for my nephew. I received a confirmation that the credit card had been debited, however he never received a code to activate his gift. Where can I find out the code for my gift voucher?

    If you purchased your gift using iTunes, you can resend it. Just follow these steps to resend an unredeemed gift to any address:
    http://support.apple.com/kb/HT1541

  • How do I find out the date in which I registered my imac?

    How do I find out the date in which I registered my imac?

    It doens't really matter what date you registered it. However if you are looking to see when your expiration on AppleCare is/was it is 3 years from the original date of purchase. You can use the Apple Online Service Assistant afer you input the serial number click the link that says See your service and support coverage.

  • How can I find out the first intial row in VA02-output transaction??

    How can I find out the first intial row in the screen which appears during sales order change (VA02) >>enter the sales order number >>after the first screen appears >>in the menu bar go to EXTRAS>>OUTPUT>>HEADER>>EDIT??
    I have to find out the first row in the OUTPUT column which is empty,then populate it with some data using BDC.
    usefull answers will be rewarded.
    regards,
    Shashank .

    Pass the sale order number in the object key of NAST table,
    if u get 3 entires, then u need to place ur entry in the fourth row in that table control thru BDC.
    I think u got the logic.
    Regards,
    Sujatha.

  • How can I find out the dpi of an image in Acrobat.

    How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.

    Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
    That opens a panel on the right.
    To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
    Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties.

Maybe you are looking for