Can I find the part numbers for the output drivers on the PCI-6534 Card?

We are planning to use an NI-6534 card to test very sensitive hardware. The DAQ will simulate the interface to which this particular piece of hardware will be connected.
Our concern is that there is some way that we can damage our hardware during test.
The best way to insure that this is not a concern would be to say that the DAQ interfaces to our hardware in the exact same way as our real interface. This of course is not likely, so we need to understand the differences. To do this I think we need to compare the I/O spec of the devices directly connected to our hardware under test on both the DAQ and our interface.
Of course we need to know the part number of the NI I/O output drivers.
The kind of data I think we are interested in is:
Voh, Vol, Ioh, Iol, and transition times...
Thank you for any help you can provide.

Hi goldbach,
The other specification you were looking for, slew rate, is typically between 2.75 and 4.5 ns depending on your load. The following knowledge base discusses briefly on this point.
DIO-32HS (6533) Cabling Issues
http://digital.ni.com/public.nsf/websearch/783D15B155FAC6F1862566B3006A32F0?OpenDocument
Hope that helps. Have a good day.
Ron

Similar Messages

  • Where can we find the part numbers for Multisim and Ultiboard professional versi

    I want to purchase Multisim an Ultiboard, professional version. We got a quotation with the following answer:
    Part number: 852798-11J  Upgrade, NI Academic site licence;Q3 2009 Department Teaching Circuit Design Software Option
    Part Number:900798_11    NI academic Site Licence-Department Teaching Maintenance for Circuits Option Includes automatic SW upgrades for 1 year
    I have no idea where I can find those part numbers on the NI web site and for me the qouotation reffers to the academic version not the professional.
    Can anybody from NI clarify the mystery.
    John 

    Johnnelu,
    Thanks for your reply.   If you received a quotation, please email me directly with the quotation number and I will have someone update this for you.  I am not sure why you would have received a quote on the educational version in place of the Professional version.
    Specifically answering your PN questions... here are the current P/Ns for the Professional Design Suites (Multisim and Ultiboard). 
    NI Circuit Design Suite, Base ->          779930-09
    NI Circuit Design Suite, Full ->            779928-09
    NI Circuit Design Suite, PowerPro ->  779927-09
    http://www.ni.com/multisim/professional.htm  
    You can get price information online - you will need to select the specific item on the left and
    set your country code on the top.
    Regards,
    Patrick Noonan
    Business Development Manager
    National Instruments - Electronics Workbench Group
    50 Market St 1-A
    South Portland, ME 04106
    Phone: 207 892-9130
    Email: [email protected] 

  • How can i find my serial numbers for my products since i have bought the NGO version of Adobe creative suit 6 master collection?

    i get a box of products but i cant find any serial numbers at the back of CDs or the box, so what should i  do?

    To locate the serial number:
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    If you continue to have a problem, you need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.  Here is a link to a page with options to help make contact:
    http://www.adobe.com/support/download-install/supportinfo/

  • Anyone knows where can I find rubber feet replacement for my MBP (unibody) in the UK?

    After 2 years one of the feet fell off...  I went today to ask to the Apple store and they told me I have to change the entire back of the MacBook Pro!

    The same thing happened to me!
    I bought a replacement from eBay:
    http://www.ebay.co.uk/itm/MacBook-and-MacBook-Pro-Unibody-Black-Plastic-Rubber-R eplacement-Base-Feet-Foot-/270887674680
    Arrived the following day, stuck it on, job done.
    Can't tell which is the replacement so I'm happy:)

  • HP Deskjet D1560, Need Part numbers for power supply parts

    I have an HP Deskjet D1560 still in the box.  Does not have power adapter and power cord.  (My daughter took them for her printer.)  Where can I find the part numbers for the power supply parts?  I live in the U.S., so I need the power cord that will fit in a U.S. outlet.  The power cords in the product section are for the Middle East, Europe, and England.  I need the one for the U.S.  Where can I find that part number?

    The power supply is part number 0957-2231 and the associated US cord is part number 8121-0889.  I usually pick these up on eBay if I need a power supply, see the listings here.  Make sure the power cord is included, it may be listed as a seperate item.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Exact Apple part numbers for original Discs that came with late G5 Quad?

    If anyone happens to own a G5 Quad made 2006 and you still have the original Software Restore discs that came with it, I'd be much obliged if you would be kind enough to post the exact Apple part number(s) for said discs.
    I have a Power Mac G5 Quad made in the third week of June, 2006, and it is my understanding that it originally came with either Tiger 10.4.2 or Tiger 10.4.4.
    I'm very enthusiastic about this machine and very happy with its performance.  I'd like to search through the stacks of gray OS discs at local second-hand electronics shops for a matching set of discs.  It's more of a curiosity, as I do have retail Tiger and Leopard discs off of which the Quad boots just fine.
    Thanks in advance.

    Hi Ramon,
    I actually have both sets of discs. I have the disc set which came with the G5 Quad I own and its 10.4.2 while I do have another disc set which is 10.4.4 and it has also a OS 9.2.2 disc of its own for classic. When I get home later today I can see what other discs I have.. I will post the part numbers for you when I get home.
    Take care..
    Romko

  • Where can I find a restore disc for a PowerBook G4?

    Where can I find a restore disc for a PowerBook G4?

    The detailed problem is that I had used the computer for a long time without turning off.  I wanted to give it to someone else so I needed to clean the data off. Before deleting anything I switched off then on and the HD seemed to have developed a fault as the start up routine began then when the Hd started the computer crashed and restarted at the begining with the startup routine and I have not been able to go further than this.  I changed the HD for an old one that I had replaced previously which had the same software system, Leopard.  This worked perfectly but on switching off then on behaved as the other had. 
    I figured that if I could start with the restore disc I could clean the HD or at least investigate it.  Hence the need for a restore disc.
    Would this work or is there something in the logic board that is upsetting the HD and what ever I do will not cure the problem.
    Any thoughts??

  • The LCD for my macbook air model number MC965LL/A (purchased 2011) is broken , where  can I get new one and what is the part number for it ?

    The LCD for my macbook air model number MC965LL/A (purchased 2011) is broken , where  can I get new one and what is the part number for it ?

    You can find them at vendors like ifixit and instructions to install.
    http://www.ifixit.com/Mac-Parts/MacBook-Air-13%22-Mid-2011

  • HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

    My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

  • Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6". Where can I find it? Thanks for

    Hi, I have a MAC (version 10.10.2) and installed Creative Suite one year ago. Now I want to open the Illustrator, but it does not work. It says I should install old Java SE 6-Runtime-Version to open „Adobe Illustrator CS6“. Where can I find it? Thanks for your answer! Jana

    Prompted to install Java SE 6 Runtime | Mac OS 10.9
    Mylenium

  • How can I find my serial number for Adobe Acrobat 11. I got a new iMac and I don't want to use the new version at £18.00 per month. I don't need it. Thank you

    I used to use CS5 and I want to use the Acrobat version on my new iMac.
    How can I find my serial number for Adobe Acrobat 11.  I don't want to use the new version at £18.00 per month. I don't need it. Thank you

    Hi Anthony Aduhene
    Please refer : Find your serial number quickly

  • Can anybody help me find the serial number for my ipod touch on the apple website because it got stolen and i need the sereal number?

    i have done this before but i forgot how.
    i want to see a list of all the products registered in my name.

    You cannot find the ipod using the serial number.  You can give it to the police, so if they find it they can identify it.
    You can indeed find your serial numbers:
    iPod: How to find the serial number

  • Where can I find a downloadable benchmark for the MacBook Pro?

    I have a 2013 MacBook Pro and a 2006 Mac Pro. I am thinking of dumping the Mac Pro and make my MacBook my one and only computer. I want to run a benchmark on each system to see what I am trading off with this plan. Where can I find a downloadable benchmark for a Mac running OS X?

    Geekbench -> http://www.primatelabs.com/geekbench/.
    Clinton
    MacBook Pro (15-inch Late 2011), OS X Mavericks 10.9.5, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

    where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
    if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
    http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
    so i could modify and use the driver

    Hello,
    It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
    Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
    Hope this helps.
    Scott B.
    Applications Engineer
    National Instruments

  • Where can I find a user-guide for the awfull Text-Editor used to enter/edit these forums entries?

    I am desesperate to understand how quite basic functions (just as one of many examples: how can I paste text, that I have formatted in MS Word and want to paste into a Forum Post-Entry?) can be done with the primitive and awful Text Editor used to enter/edit Forum Entries. Notice, that like many other Adobe users, I am not familiar at all with HTML and it is therefore a description of the badly named "Full Editor" that I am looking for.
    Where can I find a User-Guide for this Text Editor?
    My recommendation to Adobe: exercise enough  brute pressure on the developers of this primitive Text Editor to force them to provide something more reasonable, more powerful and more intuitive.

    Thank You Jochem
    I was trying to understand how I could do things as simple as inserting text that I had previously copied. Since there are neither command menüs nor buttons for the Insert of previously copied text, I was trying a mouse right click.....and was being offered in the context menu the choice between "Insert Link", "Insert Image", "Alignement", and "Insert Table"....... but no possibility of a plain insert of previously copied text.
    Now, I realize, that Clearstream supports at least the keyword shortcut of "Ctrl V" ........that I am not using in any other software (I never use any keyboard shortcuts).
    Since Clearstream does not support reasonable choices in the contextual menus, I will need to memorize the most important keyword shortcuts.
    By the way: I detected now, that the "Ctrl V" keyboard shortcut allows me to insert formatted text.
    Even, if I will now begin to be able to use reasonably Clearstream, I am quite surprised to see that such a software provides neither reasonable Contextual Menus, nor a User Guide, nor........
    Thank you again Jochem for your patience with me.

Maybe you are looking for

  • What do I loose with "Reduce File Size" to Acrobat 8.0 compatability?

    When scanning documents using the Acrobat interface in 9.0, I find that the file sizes are very large...about 1.5MB per page. If I then select the "reduce File Size" option from the Document tab, and select Acrobat 8.0 and later compatibility, the fi

  • SAP HR Administrative Services Authorization

    Dear All, Can you please guide me for the HRAS Authorizations. I have selected the P_ASRCONT authorization object SAP_ASR_EMPLOYEE SAP_ASR_MANAGER But still when I pprocess the form, it doesnt go to the next level. But When I give SAP_ALL, the form i

  • Oracle Applications health check

    Hi, I have to 1). Do health check of oracle applications 11.5.9 2). And recommend to upgrade to R12. I always have these questions in mind. If a client is running happily on 11.5.9, what should be provided so the client will be convinced to upgrade t

  • CDN URL returns 404, but custom domain is fine, so is blob origin domain

    i added a CDN to my Azure website today, with a custom domain pointing at it using a CNAME record. now the custom domain works, the original Blob URL works, but the CDN URL returns 404. Custom domain to CDN: http://int-assets-openyourcity.heineken.co

  • IPhoto running really slow - alt cmd doesn't work, restart neither, library has about 2000 photos

    I already tried all options when starting iphoto with alt and cmd pressed - doesn't work I restarted my mac - doesn't work I clicked "repair" and "verify" disk in "disk utilities" - doesn't work My iphoto library has about 2000 pictures, I have a mac