Can i flash dead 3110 using usb in software update...

can i flash dead 3110 using usb in software update?
if yes need procedure

Such things can not be discussed here on this Manufacturer sponsered forum....

Similar Messages

  • Can same flash drive be used on mac and pc?

    can same flash drive be used on mac and pc?

    ok because i fried a Hp drive yesterday but it never asked me to format

  • Can the ipod touch 2Gs use USB 1.1?

    Can the ipod touch 2Gs use USB 1.1? I knows if it does then it will be very slow but I wont mind ... (too much). And if it does is there any down side (besides the wait)? Does 1.1 USB have a different electricity level then USB 2.0?

    You should be able to, but yes, it will be VERY slow.

  • Can anyone recommend easy to use, cheap, storyboarding software. Thanks.

    Can anyone recommend easy to use, cheap, storyboarding software. Thanks.

    Actually, the software I've seen that does this is pretty cumbersome, and since we require a storyboard at the school I teach a class or two at, the students I teach have tried many... they still end up drawing them; they say it's a lot easier.
    However http://www.storyboardartist.com/artist.html seems to be the most popular. http://www.atomiclearning.com/storyboardpro has a freebie... if you type Storyboard Software in google... ya get a pile of them. might look for some demos?
    HTH
    Jerry

  • How can I turn off the daily nagging about software updates?

    How can I turn off the daily nagging about software updates?
    I am _very_ annoyed at having to answer this every day, day after day after day.

    Thanks, PJRS.
    But if I'm reading that right, the only way to get the nagging to stop is to accept all the download that Software Downloads suggest. 
    Quite often it pertains only to software I never use. In these cases, I'm not interested in downloading it.
    And also -- if I'm understanding that document -- I have to respond every time the nagging drops down (at least once per day).
    99% of the time I have no desire to download the suggested software.
    In ANY case, it is outrageous that the software resorts to harassing a customer without at least a readily visible means to turning it off
    SO -- please let me know what I'm misunderstanding -- thanks..

  • Upgraded to Mavericks and Epson scanner software was quarantined.Powered on the scanner, plugged in the USB, clicked Software Update, and clicked Update for the Epson printer software. Update occurred by I chose "not now" to a dialog and it didn't install

    Hi, upgraded to Mavericks and Epson scanner software was quarantined. Powered on the scanner, plugged in the USB, clicked Software Update, and an Epson Printer Software Update appeared in the App Store Updatees area.  Clicked Update for the Epson printer software.  During the download, I was presented with a dialog asking me if I wanted the software to be automatically installed. I chose the "not now" option and as far as the App Store in concerned the software was installed, but it has not been.  Where did this go to and how can I force it to install?  Or is there some way to force the App Store to go through the download process again.  Many thanks!   Joseph

    Solution:https://discussions.apple.com/message/23504811#23504811
    Epson install: http://www.epson.com/cgi-bin/Store/support/SupportMavericksDetails.jsp?BV_UseBVC ookie=yes&oid=139863#stage1
    Epson Image Capture instructions: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 237343&foid=244523&infoType=FAQ

  • My Ipod says to use the Ipod software updater application??

    I unplugged my Ipod and all the songs got deleted. This is the 3rd time this has happened and now when I plug it in to put the music back on, a box pops up and says "iTunes cannot read the contents of the iPod MICHELLE'S (that's my iPod). Use the iPod Software Updater application to restore the iPod to factory settings." What does this mean? & how do I update it to factory settings? Can someone please help?

    Use the instructions in this article to restore the iPod with the iPod updater; use the document it links to if you are using iTunes 7. Some iPods may require that they be connected to the iPod AC adaptor, a car adaptor, or a 6-pin FireWire port before the restoration process can be completed.
    (16822)

  • My ipod 4th gen can't be recognized by itunes after itouch software update

    my ipod 4th gen can't be recognized by itunes after itouch software update. I have reset both PC and itouch to no avail

    http://support.apple.com/kb/TS1538

  • Where can I find the a downloaded file by Software update?

    Where can I find the a downloaded file by Software update?
    For example is there any way to find a package which is downloaded but is not installed(because the installation failed) (in this case 10.5.5) and I don't want to download it once again neither manually nor with software update.

    sina_golesorkhi wrote:
    Where can I find the a downloaded file by Software update?
    In ~/Downloads
    For example is there any way to find a package which is downloaded but is not installed(because the installation failed) (in this case 10.5.5)
    Failed installs usually remove the package, just as a proper install removes the package
    All that remains for a proper installation is a Receipt in on of the following directories:
    ~/Library/Receipts (for user-specific installs)
    Macintosh HD/Library/Receipts
    for system-wide installations, including OS-X updates.
    and I don't want to download it once again neither manually nor with software update.
    If it did not install, there is no Receipt and the downloaded file is not on your system
    If you don't want to see it again in automatic updates, put it on ignore.

  • When I add music from my CD onto my Macbook, the music will not transfer from iTunes on my Mac to my iPhone/iPad.  I'm using iCloud, current software updates and Music Match. Any solutions?

    When I add music from my CD onto my Macbook, the music will not transfer from iTunes on my Mac to my iPhone/iPad.  I'm using iCloud, current software updates and Music Match. Any solutions?

    I figured it out...user error

  • Use Current Nokia Software Updater in Windows Vist...

    Hi
    Best way to use current Nokia Software Updater in Vista:
    1- Install Nokia Software Updater V1.4.39
    2- Right click mouse in Software Updater Icon
    3- Open compatibility Tab
    4- Enable "Run this program in compatibility mode for:"
    5- Select Windows Xp (service Pack 2)
    6- Then Apply, Ok and exit
    7- Use this program to update your Nokia phone
    Good Lock

    15-May-2008 06:57 AM
    globestone wrote:
    Hi
    Best way to use current Nokia Software Updater in Vista:
    1- Install Nokia Software Updater V1.4.39
    2- Right click mouse in Software Updater Icon
    3- Open compatibility Tab
    4- Enable "Run this program in compatibility mode for:"
    5- Select Windows Xp (service Pack 2)
    6- Then Apply, Ok and exit
    7- Use this program to update your Nokia phone
    Good Lock
    good one

  • I can't seem to connect to the iPhone software update server, why would that be?

    I can't seem to connect to the iPhone software update server, why would this be?

    In the course of your troubleshooting to date, have you worked through the following document?
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • Can Lightning be made to use USB 3.0?

    Does anyone know if the Apple Lightning connectors and cables are capable of utilizing USB 3.0 or higher speeds or are they currently restricted to USB 2.0 because the design does not allow it? I am aware current Lightning connectors utilize USB 2.0.

    Hi Fernando Mata Licon,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    Using USB 3 devices on Mac computers FAQ
    http://support.apple.com/kb/HT5172
    Cheers,
    - Judy

  • Using USB-6008 software timimg Generate waveform

    I am using USB-6008 device. Base on it's User Guide, this device on support software-timed and maximum update rate is 150 Hz.
    By place a time delay VI for 1ms, I have a 1.660Hz sine signal. Is this wrong for place a time delay VI for software timing?
    I would like to generate a 60 Hz signal by using software-timed VI on USB-6008 device. How should I do?
    Thanks a lot.

    DephinTW,
    The update speed of the USB-6008 is largely dependent on the speed of
    you computer as well as anything else on your USB bus. If you are using
    an older computer or have other USB devices on the bus, you may not
    achieve this rate. In order to output a 60Hz signal, the minimum output
    sampling rate is 120Hz. This corresponds to an 8.3 msec. delay between
    samples. Instead of using the "Wait" VI, you should try using the "Wait
    Until Next ms Multiple" VI. Place this in parallel with your
    generation. This will synchronize the output with multiples of the PC
    clock, rather than waiting for a fixed amount of time, irrespective of
    code and USB overhead.
    Hope this helps,
    Ryan V.
    National Instruments
    Ryan Verret
    Product Marketing Engineer
    Signal Generators
    National Instruments

  • Third party app can only see but not use library after current update

    An application that has been using the iTunes library to play music from play lists can no longer read and use the library but can only see the library. This is happening since running the iTunes update to 12. I have corrected the problem by reloading maverick and loading music into iTunes after a fresh install. The app works again with a fresh mavericks install. So, now what is the order of operations to backdate to an earlier version of iTunes? My library can no longer be read by the mavericks install as it has been updated by iTunes 12.
    I am using an external drive FYI.
    I was thinking I would use the mavericks install and create a new library on the external and move the music folder to the same directory and then add the whole directory. Then one by one import the play lists.
    I don't know what to do about the artwork directory? Do I move it and replace the same folder in the new mavericks library directory? Will the above process complicate the assignments?
    If apple reads this... The version update that did away with coverflow was the beginning of iTunes decline. It wasn't broke. It was close enough to perfect as a library management tool. You should make the next version closer to that one. 

    I had a similar problem when trying to install Zinio.air. I have made it all work out. What i did was remove Adobe Air 15 entirely from the Utiliites and Library/ accounts and preferences. I then downloaded Adobe Air 13 and installed and then clicked on Zinio .air and it all installed ok. I also had to temporarily change security settings from Apple approved to Anywhere. All functioning now.

Maybe you are looking for