Can i force a officejet pro 8000 a809 to print black and white when a color cartrigde is empty?

I am trying to get two text document printed and I get an No ink/toner message on the top the printer que window. It is the Yellow ink cartridge, can I bypass this and force it to print in black and white only?

I know these posts are old, but.
To force the print to print even though some carts are empty or expired. Turn the printer off. Then hold the feed button while turning the printer on. Keep the feed button pressed for about 4-5 seconds after powering on the printer.

Similar Messages

When starting the macbook pro, the screen was flashing black and white, then to color to color, any suggestion to fixing this problem?

When i am starting the macbook pro, the screen was flashing black and white, and then to color to color, and the whole process repeat all over again, is there any suggestion in solving this, or is there no way to solve this and i need to bring it to the apple support?
My computer Spec:
Macbook pro Version 2011

Sounds as if you're having a problem with your GPU (graphics card). Only Apple can diagnose and fix this, so the best thing would be to take your machine into your local Apple Store or an AASP.
Clinton

HP Officejet Pro 8600: How do I get my printer to print black and white when sending it an email?

Whenever I send my printer an email, it automatically prints it in color. Is there a way to set it so that it can print in black and white?

Hi Beemo,
I see that you're wanting to print in black ink only.
I have a couple of questions for you.
Are you trying to print black ink only while using ePrint?
Are you trying to use black ink only when printing from computer?

HP Officejet Pro 8000 A809 not printing blue

I've tried the suggestions here with no luck: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01962224&tmp_task=solveCategory&cc=us&dlc=en&la...
If you look at figure 11, group 2 after the black and gray block shows only a trace of blue, The 3rd and 4th blocks look pretty good, but the last one is shades of yellow. I've tried a full cleaning cycle twice and have unplugged and re-plugged. Oddly, the last time I cleaned, the intermediate cleaning results for blue look worse that the first phase of cleaning. Also, if I print a full page, blue shows on the top half then fading out toward the bottom. At this point I'm just wasting ink and paper.
Any suggestions?
Thanks.

Hi samsquared,
Welcome to the HP Forums!
I have read your post on the dimishing print quality of the blue cartridge, and I would be more than happy to be of assistance!
In addition to faded colour, what does the quality look like on Test Pattern 3? Are there white or black lines going horizontal through the gray bars?
Since you have already performed two printhead cleanings with diminishing results, I would recommend replacing your magenta/cyan printhead. This step can be found in the Troubleshooting Print Quality Issues document under "step 3" of "Solution 4."
If replacing the printhead does not resolve your issue, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
Thank you for visiting the HP Forums, and I will be looking forward to your reply!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

HP OfficeJet Pro 8000 does not print black

Hi We bought an HP office pro 8000 printer which we have had in the box in a cupboard for the last 14 months (never been opened), I have finally got around to getting it out of the box ans setting it up, however it does not seem to print black only the other colours. The black ink looks fine and I can see it comes out of the cart. HP will not help with the problem as the printer is out of warranty even though it has never been used. Anyone got any idea's why it will not print black
Thanks
Colin

Hi Colin & SubChi
Are you able to generate a PQ Diagnostic page? Any black showing up?
Have you tried running a printhead clean?
More details in the link below
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01962224&cc=us&lc=en&dlc=en&product=3762364&tmp...
Please let me know how you get on,
Kind Regards, Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Hp officejet pro 8000 a809 installed locally on vista business with driver 8.12.2008cant share to xp

My customer has a HP Officejet Pro 8000 A809 installed locally on Vista Business with driver 8.12.2008 He wants to share this for use on the XP PC but after installation on XP and trying to go into printer properties the message comes up "The HP Officejet Pro 8000 A809 Series' printer driver is not installed on this computer. etc etc Do you want to install the driver now? It doesnt matter if you go through the installation process or not, when you try and print a test page you get "Test page failed to print. Would you like to troubleshoot etc"
I have tried installing the XP drivers locally AND on the Vista PC but with no luck. On the shared tab under "additional drivers" there are only Vista drivers listed.
Any advice gratefully received.
Dan

Depending on the model of the unit it may not be wireless. if it says A809n then it is a wireless model, but the A809a model is not. http://h10032.www1.hp.com/ctg/Manual/c01659070.pdf Here is the manual for that unit in case you need it.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided! If you are not sure how to do this, please see the link below.
I am a Printer Tech for HP.
How do I give Kudos or mark a post as Solved?
I am an HP employee

HT4356 My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

You can use 3rd party software such as Print n Share if you have a PC or Printopia if you have a Mac.
Or you can check HPs site and see what they have available.

Officejet Pro 8000 A809 - can I print just black and have empty color cartridge?

I saw in a previous post entitled "PSC 1410 - can I print just black and have empty color cartridge"
that the printer does color underprinting even when printing black and white, to prevent bleeding.
My question is, is this also true when selecting the grayscale printing option in the printer properties dialog box?
I installed the printer using an ethernet connection to a Dell Inspiron 8200 laptop computer running Windows XP Professional

Yes you will still need the color cartridge. The printer uses what is called under printing, it still uses some of the color cartridge's ink in this process, even when printing in just black, the reason is to stop the black from "bleeding"
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

HP OfficeJet Pro 8000 A809 printing line feed page after every job

I've searched and I have found this is a known issue - that there is supposed to be an update to fix this. I can't find this update anywhere for the HP Officejet Pro 8000 A809. It is connected to the computer via a USB cable. I have tried uninstalling and reinstalling the driver, changing the print heads, doing diagnostics on it, ..., and I still get the line feed page printing after every print job. Help!

Hey there @tjkalb, I hope you are doing well
I read your post about how a "line feed" page prints after each print job from your Officejet 8000, running Windows 7. I have some steps and questions for you to try to get started. Afterwards please get back to me with the results and we will go from there if needed.
1. Does the "line feed" page print after print jobs from all programs, or are you finding it prints when you print from somewhere specifically?
2. Try a Clean Boot on your PC, restart the PC, and try printing from Notepad to see if the line feed prints.
3. Print a Print Quality Page from the printer and examine it for any defects and to see if the line feed page still prints afterwards:
source
4. Click here and try download the "Updates" for this printer: HP Officejet Pro 8000 Printer - A809a
5. Create another User Account profile on your computer and try printing from there to see if the line feed page prints from another profile.
I look forward to hearing from you! If you wish to thank me for my assistance, click the thumbs up icon below
Happy Friday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Paper mismatch error with HP officejet pro 8000 (A809)

officejet pro 8000 A809 wireless -wrong size paper
running OSX 10.7.3 on a macbook pro 2.3GHz Intel i5
this printer has been running fine for a couple/three years now.. no problem when I got the new macbook last summer, or when i upgraded to Lion.
Now it has started getting confused as to what the paper size is - i get this error:
Paper Size Error: The paper size selected in the printer driver software does not match the paper size in the printer IN tray.
but only SOMETIMES. Like right now after screaming at it for an hour, unplugging and rebooting, etc., I sat down to write this and needed to get the exact wording for the error, so i told it to print. And it printed just fine. So I tried the next page I need to print, and I got the error again. I didn't even TOUCH the printer in between. The paper is letter size, it's always letter size. It's in landscape mode, but it has been for the whole morning, while I've been printing out certificates. Now it won't do it anymore. I am at a complete loss. I have rebooted my computer 3 times now, and unplugged the printer countless times. HELP!!!!!
It did this about 3 weeks ago and gave me fits for a couple days, and then magically started working fine again. I've deleted the USB and Bonjour versions of the printer from system prefs and re-added them. More than once. ;-)
Any ideas?

Though a day late & dollar short, I too encountered this issue with Yosemite.
After removing the paper & restarting the printer, I determined the issue to be related to the document. The document I was printing was sent to me from an international corporation. Which I figure was using a non-US paper format or a larger page format for the document.
I tried to change those within the document & was unsuccessful.
I copied the content to a new document & it printed fine.

How to force photosmart 6180 to print black and white only

I think the subject says it all. I would like to know how I can force my photosmart 6180 all-in-one to print black and white.
-Rod

Hi Rod
For the PS C6180 you should have an option in the print settings to Print in Grayscale, see step three in the link below
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00721052&cc=us&lc=en&dlc=en&product=1153494&tmp...
Kind Regards
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Force Canon C5030 to print black and white

Hello:
I am trying to force my Canon C5030 to only print black and white even if it is sent color prints. We do not use a print server and if I change the defaults on each machine, co-workers can still change it to print color. Is there a way to force this through the settings on the actual printer?
Michael
Solved!
Go to Solution.

Hi,
I don't know what setting on the device could prevent from printing in color. Maybe something in service mode.
I would suggest to use the Canon Generic PCL6 driver and set it to 'Black & White [A3]' in Device Settings in the printer's properties. In that way, you can provide all functionalities like finishing options, drawers etc. and the color option will not be available.
But If you don't have a print server, probably users will be able to install a color capable driver themselves on their computer.

Print black and white on HP Officejet 6700

I have an IMAC operating system 10.8.1. I can't get my HP 6700 to print only black and white. Even when I choose fast print black and white, it won't print that way. I can't set up any new print preferences. Now I am out of yellow ink and can't print anything. Went and bought brand new black ink, and printer recognizes that black ink is full.
I'm sure just something I am doing wrong. Can anyone help?
This question was solved.
View Solution.

Hello again Qwert123,
This may be a combination of a couple of issues, or more to the point, a timing issue. You mentioned being out of Yellow and cannot print. This pulled from the User's Guide, page 74. I hope this helps........
Print when one or more ink cartridges are depleted
The printer can still operate when the black ink cartridge or one or more color ink
cartridges are depleted, but it will print more slowly. Also, the quality of printed documents
might be affected.
The printer will not be able to print when both the black cartridge and a color cartridge
are depleted.
• If the black cartridge is depleted, any black color in printed documents is created using
a combination of the remaining colors. As a result, blacks might not appear to be as
dark.
• If a color cartridge is depleted, the printer will print in grayscale using the black
cartridge.
When possible, replace any depleted ink cartridges. For information about how to install
new ink cartridges, see Replace the ink cartridges.
CAUTION: While ink cartridges are not damaged when left outside of the printer,
the printhead does need to have all cartridges installed at all times after the printer is
set up and in use. Leaving one or more cartridge slots empty for an extended period
may lead to print quality problems and possibly damage the printhead. If you have
recently left a cartridge out of the printer for an extended period, or if you have had a
recent paper jam, and have noticed poor print quality, clean the printhead. For more
information, see Clean the printhead.
Chapter 7
74 Work with ink cartridges
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

HP Officejet Pro 8000 A809

after installing Snow Leopard I have been getting error messages saying the software for the printer was installed wrongly. I am then invited to authenticate, and it runs off and 'repairs permissions' then prints.. Doesn't say what permissions and the time taken is too short for it to be a full permissions repair.
The printer software, aside fom the initial install with Snow Leopard and the variousO.S. updates, was installed through the Software Update sub menu. I assume it is not a matter of user privileges though I nearly always run in a non admin and authenticate. I have a few times had issues with apps and only got by them by installing in root, but that seems not what is involved as a set of 'permissions' was apparently being repaired.
Incidentally I have just been ploughing through an 11 page posting on HP printers where some seemeed more intent on propounding canaon law than helping, so don't bother with a recitation of dogma such as on not using root.
I have just taken a download of the HP drivers from the Apple site so could delete the `hp drivers (If I can track them down) though I would like an opinion on the best way to then re install them. By the wy my OS is now 10.8.3

Hey there @tjkalb, I hope you are doing well
I read your post about how a "line feed" page prints after each print job from your Officejet 8000, running Windows 7. I have some steps and questions for you to try to get started. Afterwards please get back to me with the results and we will go from there if needed.
1. Does the "line feed" page print after print jobs from all programs, or are you finding it prints when you print from somewhere specifically?
2. Try a Clean Boot on your PC, restart the PC, and try printing from Notepad to see if the line feed prints.
3. Print a Print Quality Page from the printer and examine it for any defects and to see if the line feed page still prints afterwards:
source
4. Click here and try download the "Updates" for this printer: HP Officejet Pro 8000 Printer - A809a
5. Create another User Account profile on your computer and try printing from there to see if the line feed page prints from another profile.
I look forward to hearing from you! If you wish to thank me for my assistance, click the thumbs up icon below
Happy Friday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Can I use my Officejet pro 8000 WITHOUT the duplexer

Does anyone know if there is a way to remove the duplexer unit from the back of my Officejet pro 8000 and still print (only single sided obviously)?
If I remove the duplexer, then paper spits out the back. I would like to use the printer on a 11" deep shelf. Duplexer removed would allow that...
Thanks,
Andrew

Same question here from Denmark! The prior models had a kind of latch that could be put into the whole where the duplexer goes, but there was not such a thing with in the printer box.

Can i force a officejet pro 8000 a809 to print black and white when a color cartrigde is empty?

Similar Messages

Maybe you are looking for