Can I force LE 8 to scan for audio device?

I run all recordings through a Mac Min. As there is only 1 firewire port, I need to have my mixer feeding into a powered hub. When I start the Mac, it doesn't retain the connection to the mixer and I need to switch the mixer and the mic off on order to let Logic go through the scanning process to re-acquire it. This isn't really a problem, but I find it really irritating. When I had a direct firewire connection to the control room iMac, it always 'saw' the mixer and mic.
Can anybody suggest a way to keep the connection/setting or can I force Logic to do the scan for audio devices without having to turn the mixer off and on.
Thanks.

I am aware of the "hold alt key" at start up. However this doesn't work for me for some reason

Similar Messages

How can I 'force' my Macs to look for each other on the network?

OK, I have an iMac with a wired connection to a router, and a MacBook Pro with a wireless connection to the same router. Most of the time, they can 'see' one another on the network, no problem. But, every so often, even after both have been on for a while, I will click the Network icon and the other computer will not appear as available - this happens even when the target computer can see the computer I'm using to try to access it.
So, here's my question: how can I 'force' my Macs to look for (and find) one another on the network?
Thanks... if you need further information, just ask... - beck

If you are using Tiger, go to
Finder menu -> Go -> Connect to Server
Enter the specific IP address of the other Mac where is says +Server Address+. You can find the IP address by running System Profiler or looking at System Preferences Network pane (on the other Mac).
Once you have mounted the volume you to access, make an alias for it and place it in the Dock or on your Desktop. The next time you want to connect to that server, use the alias.

Disable scanning for new devices?

Another new user question: Is there a way to disable the automatic scanning for new devices in Logic Pro 9? At the moment, my system is connected to a KVM (w/USB) switch, and every time I switch to the system running logic, it asks me if I want to use my USB headset, which is on the KVM switch, as an audio device (I don't). It would be nice if I could turn off that function and scan manually when I add a device that I want to use with Logic. Thanks...

Hi Stephan,
Not yet. This is a new feature we added in December to demonstrate during registration that the Service Request automation is working.
While these Demo Service Requests are real Service Requests, they are held in a special queue and not routed to TAC engineers. Smart Call Home will automatically close every Demo Service Request after a short time.
In the next release, we plan to implement a toggle in the Smart Call Home portal so that you can control this feature.
Feel free to continue registering devices. Demo SRs are just an additional validation that everything is working. They shouldn't create any additional work for you or for TAC.

HT204053 Can you use the same Apple ID for two devices ?

I have an MacPro and I am buying an iPad. Can you use the same Apple ID for two devices or should I create an new AppleID for the ipad?

Welcome to Apple Support Communities
The Apple ID purpose is to have the same data in all your devices and share your purchases among all your devices, so you can use your Apple ID in both devices

Can I use the same Apple ID for multiple devices

Can I use the same Apple ID for multiple devices?

Yes. Up to five devices can be authorized on a single computer using the same Apple ID. You can also use the same Apple ID on multiple devices is they are all going to use the same iTunes Library by the same user. But it's ill-advised if multiple users are involved who wish to keep their devices separate from the devices belonging to other users.
How to use multiple iPhone, iPad, or iPod devices with one computer
Using More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax.

HT204053 can I use the same apple id for many devices

can I use the same apple id for many devices on the app find my phone

You can if they are all using the same iCloud account (ID). The app will only display the devices using the iCloud account that the app is currently signed into. If your devices are using different accounts, with different IDs, you will need to sign out, then sign back in with the iCloud ID being used on the device you are trying to locate.

How can I create a magazine web app for all devices?

How can I create a magazine web app for all devices?

magazine web app is not supported in DPS as of now. You can share the contents to preview it on web content viewer.

I bought a macBook Air, all my devices were synchronized on a old PC. How can my MAC be the main basis for my devices?

I bought a macBook Air, all my devices were synchronized on a old PC. How can my MAC be the main basis for my devices?

Hi Sodam,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/HT1420
Cheers,
- Judy

I can't get BT Vision to scan for channels

Yesterday out BT Vision box stopped working for no apparent reason. After checking several channels and the settings I did what I usually do at times like this and reset the system.
When it came to setting it up again I went through all the options but when it got to "Scan for Channels" it never got past '0% Complete'. I waited a LONG time but it still never got past '0% Completed'. I tried to go from the beginning but I still hit the same problem.
Since then I've tested every cable I can but still no luck. We rescently got BT Infinity so there's a cable running from the BT Vision to the homehub that I'm unable to check but that's it. I can watch things using just the television so I don't see how it can have anything to do with the arial.
PLEASE HELP! I'm all out of ideas

I take it you mean you did a factory reset?
Might be worth trying again.
Thinking..... Remove Ethernet cable from the vision box and try rebooting
Thinking remove aerial from box and try rebooting.
Last switch off everything including the Openreach modem.
If you've done all that and its still stuck then your box may well have a terminal problem.
If you get to this stage and can get no further then either a phone call to report the problem may resolve the issue and you can tell them you have done all possible tests
Or
Drop the Mods am email (link below)
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Can you have one icloud storage plan for multiple devices

hi,
i'm wondering if there is a way of consolidation various icloud storage plans into one.
i only use my free 5gb for my 5s as i back up photos to my mac, however my wife has already upgraded her storage plan for her 5c to the £1/month.
with the new release of backing up your entire photo library on you mac (which im keen to do) im going to need to upgrade my own account as the mac is set up for my apple id.
i currently also pay for itunes match.
im keen to know if there is a way we can use one large back up facility for: my 5s, the mrs's 5c, the mac, with out paying for multiple storage plans.
im guessing the itunes match is stand alone but if i can have one payment for large storage and put everything there that would be ideal, and seem a reasonable request for most families.
any help greatly appreciated
thanks
Scott

Accounts can't be merged.

I have an iPod Nano 8GB 2nd Generation device which I retain for listening to speech mp3s only. Can I obtain a docking station/charger for this device?

I have a 2nd generation iPod nano used for speech mp3s only. Can I obtain a docking station with or without charger for this device?

Yes. Have you tried looking on Amazon for compatible options? There are still plenty available. Here is one possibility.
http://www.amazon.com/Cyber-Acoustics-Portable-Digital-Docking/dp/B000KE48CM/ref =sr_1_1?ie=UTF8&qid=1316447195&sr=8-1
B-rock

Can not remove second line in Jabber for Tablet device on CUCM

Hi all,
The functionality we are trying to achieve is that people will have different DNs for their desk phones and Jabber for iPad devices, but when they make a call from the iPad, the desk phone DN will be shown. I have been testing out the Primary extension feature in the CUCM but it doesn't work properly so far. And now, I added two different DNs to a Jabber for Tablet device and can not remove the second one from 'Modify button items'. It gives the following error :
Update failed. TypeDbErrors.gen25083
Any ideas on how to fix this? Any ideas on how to use the primary extension feature?
Regards,
Fikri
Enironment :
CUCM 8.6.2
Jabber for iPad 9.3.2 / Jabber for iOS 9.6

I would delete the device and recreate it or delete the DN and then put it back on the device(s) it does belong on. The only real way to fix this would a TAC case so they can open a defect for you.
Primary Extension isn't used in any of the alerting/connected display states. The only way to achieve this would be a lot of very complicated translation patterns/partitions/CSSes with calling party transformations on them. For example, if your desk phone DN was 2000 but the tablet DN was 3000, the translation pattern that would need to match for every number you dial would have to transform the calling party to 2XXX.
If you want an opinion, this is bad design. You don't email a person at a separate address for their desktop vs. their smartphone. CUCM is designed to work the same way: you are calling a user, not the device.
Please remember to rate helpful responses and identify helpful or correct answers.

Can my iphone 5 create a hotspot for other devices

can my iphone 5 create a hotspot for other devices

Hello Bobscott,
Go through the links below to create a Hotspot Network from your iPhone.
http://support.apple.com/kb/ht4517
http://support.apple.com/kb/TS2756
http://support.apple.com/kb/HT3574
Hope this helps you

J2ME - scan for bluetooth devices

Hello,
Where can i find an example of how to get (in the console, for example) the active bluetooth devices? I need a java program regarding to this. I know there are some examples, but where can i find a good example in this sense? Can you give me some examples?
The idea is that i wanna store in a file (local file) all the active devices.
I don't have a real bluetooth device, but using emulators.
Thanks!

Hi everybody, here you'll find a MIDlet code for bluetooth device descovering
hope it will be helpful
>> HERE

Error installing Driver for audio device in MS-6585 Motherboard

Hi,
I have MS-6585 Max L motherboard. I installed windows 2000 with SP4. When I tried to install driver for the audio device, it always fails with the following error.
An error occurred during the installation of the device.
The data is invalid.
And in the Device status in the properties menu
The drivers for this device are not installed. (Code 28)
I tried to download the latest driver using the "Live Update" and it didn't help. I tried few other options suggested in the web.
The usual cause of this problem in Windows 2000/XP systems is Registry keys that are set as read-only.
From the Start menu, click Run and enter RegEdit to run the Registry Editor. Open the following - Keys => HKey_Local_machine => System => CurrentControlSet => Enum => PCI.
You will see several keys in this form - Ven_xxxx - where xxxx represents a string such as - 1102&Dev_004&Subsys_00011103&Rev_04.
In each of these folders there is another folder that has a long numerical name. Open each of these folders, and look for the DeviceDesc entry that matches the type of hardware that you are trying unsuccessfully to install. Use the right mouse button to click on the Ven_xxxx entry for that device, and click Permissions. If it is set to read-only, then that is the cause of the problem. To rectify it, change it to Allow Full Control.
I'm stuck and I am not sure what else to try. Its not clear to me where the problem is. Is there any log I can look? Any other suggestions please
BTW, It used to work..I had to reinstall windows 2000 and after the clean/format reinstallation it stopped working.
thanks for any help
Suresh

It might be that the drivers are for WinXP. Are you 100% sure they are for 2000? Can you get a copy of XP, it would prabobly solve youre problem.

Can I force LE 8 to scan for audio device?

Similar Messages

Maybe you are looking for