Can I force the A/V adapter for IPad to output a certain orientation?

I got the A/V Adapter for my iPad 2 and all is well except there's an app I need to demonstrate that 'technically' runs in portrait mode, although you use the app in landscape.
Much to my dismay, the output auto-rotates and the app appears on its side on my television. I am hoping that there's a way to 'lock' the output to landscape mode, although I fear the worst.
Does anyone have any information on this subject?
Thanks,
Nick

Thank you for your advice. I appreciate it.
According to this page on the Apple website, you can save up to $30 on an iPad with education pricing - http://store.apple.com/us/browse/campaigns/back_to_school
With that, and the lower prices of iPad air in the US, I'll be saving $130 on a 16 GB Wi-Fi model if I bought it in the US than I would in India. Considering that Apple is a very reliable company and that I get sufficient time to use the iPad in the US to learn about any defects (if any) in it, I think I can take the risk of the Indian Apple store not honoring the warranty. Even if the product shows some defect in India, I can use the $130 which I would have saved to get it repaired.
Any views regarding this?

Similar Messages

  • Can I use the Ipad3 power adapter for the Iphone5

    Can I use the Ipad3 power adapter for the Iphone5 or vice versa?

    No more than usual...
    A quick search will yield the number of times this comes up.
    I have been charging my 4s with mu iPad 2 charger since new

  • Where can I buy the Apple original case for iPad 1st Gen?

    Where can I buy the Apple original case for iPad 1st Generation?? I prefer the new one (and also the cheap one) :P

    http://www.amazon.com/Original-Apple-CASE-ZML-MC361ZM-Packaging/dp/B003CGMQ38

  • Where can I find the User Guide ios7 for ipad in german

    Where can I find the User Guide ios7 for ipad in german

    https://itunes.apple.com/de/book/ipad-user-guide-for-ios-7/id709634245

  • I can't download the Weblogic server adapter for Eclipse Ganymede (3.4.0)

    In Eclipse Ganymede (3.4.0) when I create a new server I cant download the Weblogic server adapter.
    Previously when creating a new server in eclipse I could select "Download additional server adapters" and it would download the adapter from a BEA site. There no longer appears to be a BEA site in the list it tries. The other usual suspects are available.
    Would like to move to Ganymede but can't until this issue is resolved. Any help with a workaround or additional info would be greatly appreciated.
    Edited by ujik at 06/26/2008 5:20 AM

    http://bugzilla.bea.com/show_bug.cgi?id=297
    http://bugzilla.bea.com/show_bug.cgi?id=300

  • How can I 'force' my Macs to look for each other on the network?

    OK, I have an iMac with a wired connection to a router, and a MacBook Pro with a wireless connection to the same router. Most of the time, they can 'see' one another on the network, no problem. But, every so often, even after both have been on for a while, I will click the Network icon and the other computer will not appear as available - this happens even when the target computer can see the computer I'm using to try to access it.
    So, here's my question: how can I 'force' my Macs to look for (and find) one another on the network?
    Thanks... if you need further information, just ask... - beck

    If you are using Tiger, go to
    Finder menu -> Go -> Connect to Server
    Enter the specific IP address of the other Mac where is says +Server Address+. You can find the IP address by running System Profiler or looking at System Preferences Network pane (on the other Mac).
    Once you have mounted the volume you to access, make an alias for it and place it in the Dock or on your Desktop. The next time you want to connect to that server, use the alias.

  • Can I force the bootcamp wizard to skip looking for the bootcamp drivers?  I have already downloaded the latest drivers and loaded them on a FAT usb drive.  All I want is for bootcamp to create the partition and allow me to install windows 8 pro

    Hi Everyone,
    Can I force the bootcamp wizard to skip looking for the bootcamp drivers?  I have already downloaded the latest drivers and loaded them on a FAT usb drive.  All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
    The bootcamp drivers have been downloaded from apple's website.  Filename:  BootCamp5.0.5033
    I have a iMac 27" late 2013 model.
    NOTE:  I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
    Appreciate any assistance.
    Regards,
    asdutoit

    There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
    Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

  • Can I charge my iPad mini and/or my iPhone 4S from 220 volt outlets using just the correct plug adapter for the country.

    Can I charge my iPad mini and/or my iPhone 4S from 220 volt outlets using just the correct plug adapter for the country, without a power converter?

    Not staff or owner by a long shot.
    I just know that anecdotally I have seen people reporting issues with their mini's charging. Is there a real issue or not? I don't know. Not a day goes by that a person doesn't post here complaining that their iPad won't charge and it turns out that they're trying to do it via USB or with the iPhone block.
    But while there are a lot of user fixes sometimes it's good to have the pros take a look at things,and at the very least document that there has been an issue.
    the four main reasons an iPad won't charge (beyond being plugged into a USB port)
    Bad cable
    bad outlet
    bad brick
    rule those out and it leaves issue with the iPad.

  • Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB?  They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system I recently purchased.

    Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB?  They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system with universal dock for Ipod/Iphone I recently purchased.
    You can also send my answer to [email protected]
    Thanks in advance for all who will help.
    slovebk

    refer to this Apple support Article, on Universal Dock which retail at $59 at Apple store.
    http://support.apple.com/kb/HT1380
    Look through the compatible list chart and see which 80GB model are you using, either ID 9 or 10. you can order through Apple Online Store.
    Have a nice day!

  • Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

    Can you use the same charging cable for both an iPhone and an IPad or are they different?  When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
     Cheers, Tom

  • Can we enhance the Sender SOAP Adapter with our own modules?

    Hi All,
    Can we enhance the Sender SOAP Adapter with our own modules on the Module Tab Page in the Module Processor?
    I believe the answer is no. However, whatever may be the answer, I would like to know that is there any specific reason for that.
    Please help me in this regard.
    Thanks,
    Yogi.

    Hi,
    I think, we are mentioning the URL of the adapter channel directly in the configuration. SO there is no place we can customize this flow..just a thought
    Because in the file adapter etc, After Adapter Engine picks up the data and before it goes into integration engine module is processed..
    http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f013e82c-e56e-2910-c3ae-c602a67b918e
    Rgds,
    Moorthy

  • Can i use the iPhone-power adapter to charge my iPad 2??, Can i use the iPhone-power adapter to charge my iPad 2??

    Can i use the iPhone-power adapter to charge my iPad 2??, Can i use the iPhone-power adapter to charge my iPad 2??

    I don't know about that for sure, but my guess is that it won't matter.  Battery technology today is much better.   You should follow Apples battery tips here:
    http://www.apple.com/batteries/ipad.html

  • Re: Satellite A660-12P - can't find the right display driver for Win XP

    Hey everyone, i need some help with this one:
    I just made a dual boot Win7 (x64)/XP (x86) on my laptop, but i can't find the right display drivers for the video controller VGA compatible on XP.
    Does someone know where i can find them?
    Many thanks,

    Yes, you get this message because you cannot install the nVidia rivers only executing the exe file.
    If you want to install such drivers then you have to do this in device manager.
    You have to force the notebook to choose the driver
    You can do this choosing the advanced installation procedure which helps you to point to the driver files!
    PS: might be helpful:
    http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

  • Can i use my macbook pro adapter for my air

    Hello i have a few macbooks and wanted to check if I can use macbook pro 13 inch power adapter to charge my new macbook air 13 inch?

    "Power adapters for Intel-based Apple portables are available in 45W, 60W, and 85W varieties. Although you should always use the proper wattage adapter for your Apple portable, you can use an adapter of a higher wattage without issue.
    For instance If you have a MacBook (13-inch Late 2009) that normally uses a 60W adapter, you can also use an 85W adapter with that computer. You would not use a 45W adapter with that computer; it would not provide enough power for that MacBook. Using an adapter of higher wattage than the adapter that came with the computer will not cause the computer to charge more quickly or otherwise operate any differently than using the adapter that came with the computer. "
    http://support.apple.com/kb/HT2346

  • Can I use the same wall adapter to charge my ipad and my ipod

    Can I use the same wall adapter to charge my ipad and my ipod touch

    No offense, but that's nice. I heard I was wrong and that what I said didn't make sense, so I simplified it. If I'm wrong, fine, but you have no reason to be such a *****. You never explained why I was wrong and you were right, so how am I or anyone else suppose to know that for sure? Then I tell you my source, and you insult me some more and then ask for my background, which as for this area goes, I already gave you. I worked at an Apple store for Christmas and was told by someone on the Genius team to tell customers not to charge iPads via iPhone chargers, as they had been known to fry the adapter or in one weird case, the actual outlet. Now I could see the outlet blowing be a bunch of other contributing factors, and not directly associated with the charger. However, the topic arose when a customer came in because her iPhone wall adapter didn't seem to be working, but wasn't that old, and admitted to charging her iPad with it. Why would I NOT believe that?
    And my DEEPEST apologies on commenting on old threads. I know how vital that is to existance and what an inconvenience it is to EVERYONE else. I'll be honest, I wasn't checking dates as I assumed suggested posts with like one answer near the top of the list were newer.
    Fine, I did something foolish, but I still win as I'm not either of you heartless ****** with nothing better to do than Internet harass others. Congratulations on your existences.

Maybe you are looking for

  • CF Report Builder and Excel format

    Hi Everyone, I was trying to display a report in excel format in report builder. It shows the data, but I do not find the print button options, whereas I can see it with other formats. Is this the way it is, or do I need to format anything more withi

  • Problem in RG23C -On Hold account- Credit Transfer

    Hi, We are Imported One Capital Goods from Switzerland in 2006.For Imported Capital Goods as per legal requirement BED, AED and ECS to be avail 50% in current year and Balance 50% can avail in subsequent year or next year. Based on that we are availe

  • How Backup on DISK for Standby when Device "Tape" is alredy configured

    hello Dba's For 3 Weeks I've this issue and I start don't get usualy this database ws backup on Disk but last month we decided to setup the DLL fro Netbackup on TAPE and I've configured the RMAN for tape and it works fine. Now I need to Backup on DIS

  • Script for cold backup

    Hello friends; I'm trying to run following script which I copied from somewhere using .sh file but the same is not running and showing errors: Script: #!/bin/sh dy=`date +%D` bk='/backup/test' cm_oracle='tar -czhf '$bk'/'$dy'_db_bkp.tar.gz /TEST/orac

  • DND in the same JTable (rows)

    Hi, First, sorry for my english, I come from Montral, Quebec, so my mothertongue is French! But I feel good to read in English. I my project, I have to implement Drag n drop in the same JTable, that contain just String elements (In fact, my JTable wo