Can I free transform individual buttons within the menu widget?

When using the menu widget,
1. Is it possible to break individual buttons from their row/column and free transform them?
2. Could I delete an individual button while keeping the other buttons intact and not having to delete the page it was linked to?

Hi
Answering the questions :
1) You can create different menu items for page elements and use as individual buttons with free transform option, you can try using tabbed panel to create menu items.
2) You can if you have created a manual menu. The individual menu item will be deleted without effecting the link.
Thanks,
Sanjit

Similar Messages

  • Using the menu widget, breaking a menu apart to position buttons individually.

    I am having a completely blank moment. I'm sure I used to be able to do this in Muse, I just can't remember how.
    I want a horizontal menu in my header with a company logo to sit in the middle. So ideally I want three menu buttons on the left, three on the right. Using the Horizontal menu widget, can you break them apart to position them individually? Or in sets of three?
    Also if I create 'child' pages how do I create a drop down menu using the menu widget. I did it once, can't remember how.
    My memory is not what it used to be.
    Thanks

    Hi RimVai!
    I repeat, you must build up every button separately and link each button in Hyperlinks to the right Page as you did on video.
    Please follow the instructions:
    1.  At first make only "Home Page".
    2.  Go to "Master Page".
    3.  Copy "Home Page" and paste it on "Master Page" by using Paste in Place feature.
    4.  Drag "Copy Home Page" to the right and you can edit "Copy Home Page" as you want.
    5.  Add "Copy Home Page" on Plan Mode and change the name of the Page.
    6.  Link Pages in "Hyperlinks" to the right Pages.
    Best Regards
    TaikaJim

  • The buttons in main the vi get locked after opening a vi reference in a subpanel and using buttons within the subpanel.

    I am trying to open a reference to a vi in the subpanel of the main vi. However after the vi opens in the subpanel and after pressing a few buttons in the subpanel the buttons in the main vi get locked, i.e. I can't even close the main vi or control anything else. Is there any way how I can avoid this happening?

    > The buttons in main the vi get locked after opening a vi reference in
    > a subpanel and using buttons within the subpanel.
    >
    > I am trying to open a reference to a vi in the subpanel of the main
    > vi. However after the vi opens in the subpanel and after pressing a
    > few buttons in the subpanel the buttons in the main vi get locked,
    > i.e. I can't even close the main vi or control anything else. Is there
    > any way how I can avoid this happening?
    This is most likely happening because in either the top or sub panel,
    there is an event structure that is queuing events, and is set to lock
    the panel until the events are handled, and because of the logic in the
    diagram, the events aren't being pulled from the queue.
    So, you have a deadlock. You are waiting
    on the panel. The panel is
    waiting on the diagram. And the diagram is waiting on something else.
    So, if there are indeed event structures involved, determine where in
    the diagram things are delaying. Also, if you do not need the panel to
    lock until the event is handled, you can change the setting in the
    events dialog on the structure. But the events will still be queued
    until the diagram starts executing.
    Greg McKaskle

  • The menu widget doesn't allow me to resize individual buttons!!!

    Hi!
    Since the latest update to muse, the menu widget just goes nanners!
    It does not matter whether I untick 'edit together' and select 'unifor spacing' I still can't seem to resize individual buttons like I used to with muse 5 or 6. Furthermore, the menu widget will start resizing itself like crazy back and forth in any direction even if I slowly drag the vertical size up/down and so on.
    What is going on?
    I have a client waiting for his website and I can't even use the thing anymore since Jan 22 update (which I just installed today). I'll still work around it as it's not the actual menu I need anyway, just something to overlay over a photoshop bar to link to pages, but it still bothers me a lot that the widget is utterly useless now.
    Any ideas?
    Muse 7.2, Build 232
    Windows 8.1

    Hi RimVai!
    I repeat, you must build up every button separately and link each button in Hyperlinks to the right Page as you did on video.
    Please follow the instructions:
    1.  At first make only "Home Page".
    2.  Go to "Master Page".
    3.  Copy "Home Page" and paste it on "Master Page" by using Paste in Place feature.
    4.  Drag "Copy Home Page" to the right and you can edit "Copy Home Page" as you want.
    5.  Add "Copy Home Page" on Plan Mode and change the name of the Page.
    6.  Link Pages in "Hyperlinks" to the right Pages.
    Best Regards
    TaikaJim

  • How can I start a new paragraph within the same table cell?

    In Numbers, when adding text within a table frame, how can I start a new line within the same frame (rather than advancing to the next cell)?  I'd like to enter a mini-list of several items of various lengths of data.

    While Wayne's answer solves your problem, another possibility is to uncheck the box at the bottom of the Table inspector for "Return key moves to next cell." If that is unchecked, the return key types a paragraph return within the cell (the same as Option Return with the box checked).
    With that box unchecked, Shift Return types a soft return (new line without a paragraph break).

  • UWL Help - How can i create my own task within the Enterprise Portal

    Dear all,
    I am currently working with UWL .
    I have tried the customization and those stuffs associated with UWL , and it is working properly.
    My current issue is , how can create my own task within the Portal ( not using Ad Hoc  Workflow , which is present in Portal) ?.
    If i can create my own task within portal by API or using another method , then How can i add that task link within the drop down box that is present in the Collaboration launch pad and Mytask Workset.?
    Is there any API regarding  UWL (which is useful for creation of custom tasks in Portal using Developer Studio by means of Portal Application Creation) ?
    How can i add that custom task in the drop down ?.
    I have tried the customization of existing UWL.
    I shall be grateful to those who can help me to solve this issue with links regarding the  solution of my problem's.
    with regards
    Kishor Gopinathan

    Hi Kishore,
    I am trying to do the same thing. When i am creating Collaboration Task, it has standard templates in the dropdown like "Single Step" and "Multi-Step" etc., If i want to create my own Custom Task Template and display in that dropdown, how can i do that? Your help is really appreciated.
    Thanks
    Vijay

  • Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

    Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
    This is a new problem and was not the case before.

    Works perfectly fine for me with the latest Reader version (11.0.09).
    You write that it worked "before"; before what?  An update?  Update from what version to what version?

  • How do I redeem my code for Mountain Lion OS X when I can't find a redeem button in the Mac App store anywhere please?

    How do I redeem my code for Mountain Lion OS X when I can't find a redeem button in the Mac App store anywhere please?
    How do I find the redeem button?  What do I have to do?

    Welcome to Apple Support Communities
    Open the Mac App Store and press the Redeem button:

  • Within moments of subscribing I discovered interference with my REckon Elite Tax and Ledger software.  I can no longer produce a PDF within the software and this is inpeding my work flow.

    Within moments of subscribing I discovered interference with my REckon Elite Tax and Ledger software.  I can no longer produce a PDF within the software and this is inpeding my work flow.

    Hi elizabethc8523575,
    Elizabeth Christodoulou wrote:
    Within moments of subscribing I discovered interference with my REckon Elite Tax and Ledger software.  I can no longer produce a PDF within the software and this is inpeding my work flow.
    Please elaborate your issue. What kind of interference have you observed?
    Regards,
    Rahul

  • TS4062 I'm trying to sync my ipad over wifi, with my MAC, I have the updated software on my MAC, the ipad is up to dat 6.1.2.  I can follow all of the steps, but I can't find a SUMMARY button on the toolbar, nor do I receive the option to sync.  Whats wro

    I'm trying to sync my ipad over wifi, with my MAC, I have the updated software on my MAC, the ipad is up to dat 6.1.2.  I can follow all of the steps, but I can't find a SUMMARY button on the toolbar, nor do I receive the option to sync.  What am I doing wrong or what should I look for?  Thank You

    To sync your iPad over Wifi:
    First ensure you're running iTunes 11.0.2. And you already have your iPad up to date, good.
    Plug your iPad into the Mac via USB. Click your iPad in the top toolbar (under the search bar). Click the Summary tab if it isn't already selected. Check the box to "Sync with this iPad over Wi-Fi" (you may have to scroll down to see it). And now click the Apply button at the bottom right.
    You should be able to unplug your iPad from the Mac and it should still remain in iTunes. (If not, try Quitting and relaunching iTunes and waiting, restarting iPad, etc).
    To initiate a sync over Wifi, click your iPad in the toolbar in iTunes then click Sync. Or on your iPad, go to Settings > General > iTunes Wifi Sync and tap "Sync Now."
    If this didn't solve your problem, please let me know with a more detailed explanation of what you're experiencing so I can try to help you get up and syncing wirelessly!

  • How can I turn off "reply" button when the messages come? I prefer the "open" button.

    How can I turn off "reply" button when the messages come? I prefer the "open" button. Because my friends usually send lots of messages at the same time so I cannot read all of them when I press "reply", then I have to go to Messages -> my friends' messages, and it's really complicated.

    Sorry for not quite understanding. I guess you are referring to a notice in an alert. I do not have that alert active on my device, so I cannot say. I use the banner alert, so I just get a notice of a message and can swipe to open that particular message. If I ignore it, it will eventually go away.

  • Can we put multiple Database Polling within the asynchronous process

    Hi,
    Can we put multiple Database polling within the the same asynchronous BPEL process.
    There will be multiple Receive activities to receive the data from the poller.
    Saptarishi

    Hi Peter,
    I am using 10.1.3.4 and cannot use ESB/mediator.
    For the 2nd option,
    I have tried to put multiple receive's to poll data from a table but it does not work(it waits at the 2nd Receive). Let me try to elaborate the issue a bit.
    I have created a table for polling.
    The table has 3 columns :- transaction_id, status, is_read
    is_read is kept to implement the logical delete strategy of DB polling.
    What I need to do is to maintain a single instance of BPEL to maintain a transaction(which is uniquely identified by transaction_id).
    The BPEL should track the different stages of the transaction, i.e whenever a new row is inserted in the table with the updated status for a transaction, it must find the correct instance(by co-relating the transaction_id) and go to the next step (wait for the next receive activity) until all the steps of the transaction is completed.
    In the code, I created a correlation set consisting of transaction_id(only). The property transaction_id has an alias to the inbound variable's payload.
    In the first Receive, I checked the "create instance" checkbox. Also the correlation set is initialized.
    From next Receive onwards the correlation set is checked.
    The polling frequency is 5 secs.
    The first Receive works fine and the process is instantiated. But it waits at the 2nd Receive indefinitely.
    It will be very helpful if you can try this once. If you feel this is not the right approach, please guide me.
    Thanks and Regards,
    Saptarishi

  • Can I create a "play" button in the Tag Inspector extension

    Hello,
    I am creating a Tag Inspector extension for changing the
    properties of a customized swf files.
    Can I create a "play" button in the property panel to preview
    the swf movie?
    I've checked the "Inspectors" folder in the "configuration"
    and cant find the Inspector panel htm of swf object.
    It seems a part of core code of dreamweaver.

    No.  iDVD does not have that feature.  However, there are two ways you can do this: 
    1 - join the 10 segments into one movie file.  It's quite easy if you have Quicktime Pro and Quicktime Player 7.  Other video editing apps can do the job.
    2 - you can create a slideshow in iDVD and add each of the movies to it so they all will play one after another:
    Set the Slide duration to anything but Manual.  Do not select a transition and add no music to the slideshow.
    Remember, the playing time of the entire project should be less than 120 minutes including menu's playing time in order for you to use a single layer DVD disc.
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process.
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

  • Senior moment? I can't find the Eject button on the menu bar preference

    Whether through temporary blindness or by virtue of a senior moment, I can't find where the preference to show or hide the Eject button on the menu bar is located.  I'm trying to hide it, as it had always been.
    Any help will be most appreciated.

    If you don't want it there then CMD drag it down, if you ever want it back...
    On your main hard drive, dig down into System > Library > CoreServices > Menu Extras. Inside that window, double-click on the icon called Eject.menu.

  • Trying to reply to email but can't find a reply button on the discussion site???

    Trying to reply to Barry Hemphill message to my previous question but can't find a reply button on the discussion site???  I wanted to thank Barry Hemphill anyway for taking the time to try to answser, and hope someone else can come up with a solution?  If I were to seek software help, is
    it possible to contact Safari?  or would Apple be the right contact? 

    You must be logged in to see the reply button (as well as post).  It's in the lower right corner of each post.
    Regards,
    Captfred

Maybe you are looking for

  • Need code for Dynamic check box creation in struts

    dynamic checkbox should be created with details of data stored in database(with check mark for already selected check box). once user make any change to that page and click submit the result ahould be saved in database.. can anybody explain me how to

  • Adobe Flash Player Problem with Safari

    Hello, I've just installed the latest version of Adobe Flash Player on Safari. I can watch videos on all websites except for one, namely NovaTv Play. Whatever I do, I cannot open any of the videos. Therefore, I have to use a different browser like Go

  • HT202157 how to switch iTunes Accounts

    I've just bought an Apple TV with 5.2 firmware, and I was wondering if any of you could guide me into iTunes Switching accounts in my new toy: I want to manage the device from my phone and iPad, and from my husband's ones to. Thanks a lot

  • Borderless Printing broken in Pages 2013?

    Hi Everyone, I've been trying to print a borderless A4 document on my Canon ix6550 using the new version of Pages. This document printed fine on the previous version where all I needed to do was change the format to A4(borderless) in page setup. Now

  • GTX 560 unable to render effects preview in CS6?

    I'm using a GTX 560 with the "hack" to allow for GPU acceleration in CS6, and it generally works fine.  But every time I try to "render effects in to out", I get an error message.  I tried rendering with GPU acceleration disabled, and it works fine.