Can I get 2 sets of headphones to work at the same time on my powerbook?

For example, one USB set and one regular mini jack? I have played around in audio settings but don't see a way to do it. thanks

You might try a simple headphone splitter like this:
http://www.amazon.com/Belkin-F8V234-WHT-APL-Headphone-Splitter/dp/B0000UV2AW

Similar Messages

  • Can\'t get both rom drives to work at the same time

    HI I  just finished building my new system with the MSI 6585 and everything works well EXCEPT my two roms drives.  I can get one to work or the other to work but not both at the same time.  I have the hard drive on the primary IDE and both rom drives on the secondary IDE.  I tried setting one up as master and one as slave.  I tried them the opposite way around.  I tried setting them both on cable select.  If I try to boot with both of them hooked up the computer refuses to boot past post .  Can anyone give me any suggestions please?  
    I am running XP pro with 512 megs of ddr ram .
    The cd burner is a liteon 40X12Xthe 48.  To be honest I cannot remember what brand the DVD player/cd player is ..
    Thank you
    Linda  :D

     :D Thank you thank you thank.. you .. just got back from the computer store.. LOVE that place.. with a brand spanking new round cable and voila .. both roms working..
    I had tried several cables I had here at home.. but I guess they are all hooped..  :(
     YEHAAAAAA..

  • When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
    Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

  • HT1752 Hi, I want to play my music through my Comp as well as my wireless speaker.. i can only seem to get one working at a time, is it possible to get both working at the same time??  Thanks Kylie

    Hi, I want to play my music through my Comp as well as my wireless speaker.. i can only seem to get one working at a time, is it possible to get both working at the same time??  Thanks Kylie

    Hi Kylie,
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

  • My Mountain Lion app failed while downloading, and now I can't download it without repaying for it.  How can I get my access code to work/download the app?

    My Mountain Lion app failed while downloading, and now I can't download it without repaying for it.  How can I get my access code to work/download the app?

    Welcome to Apple Support Communities
    Open App Store, select Account in Quick Links and press Show hidden purchases. If OS X isn't there, http://www.apple.com/support/mac/app-store/contact

  • When printing two-sided from my Mac on landscape A4 with 2 columns, how can I get my HP Photosmart 6520 to print the same way up?

    When printing two-sided from my Mac on landscape A4 with 2 columns, how can I get my HP Photosmart 6520 to print the same way up?

    Or, it is set the other way around (which makes more sense). Even though you are in Landscape mode, it is binding on the Long Side of the paper. Since you are in Landscape, you would want it to bind on the short side.
    Think of the Binding like a Book. How would you flip the finished pages to read the “book.” Where it would be bound in the imaginary book is how you want it to print.

  • Help!!! 8i&9i can not work at the same time

    I have installed 8i&9i in one Solaris8, and the port and listener name is diffendent, but now 8i&9i can not work at the same time.
    pls help me
    thanks anyway.
    John

    I have hard time digesting your concern.. I have 4 Different instance of oracle running on sun 2.8.
    8.0.5, 8.1.7, 9.i rel 1, 9i rel 2. No issues there...
    The simple things is to check is you .profile ( env variables)
    Example ...
    Check you .profile or .cshrc ( Depends on the SHELL You are using )
    Let say you have .profile
    THERE IS SETTING SUCH AS...
    ORACLE_SID
    ORACLE_HOME
    LD_LIBRARY_PATH
    PATH
    etc..
    You could try the following..
    log into to you sun box..
    do echo $ORACLE_SID this will give you current SID YOU have available to work with..
    so lets say if you have a 8i SID CALLED orcl8i
    example assume you have .cshrc
    setenv ORACLE_SID oracl8i
    setenv ORACLE_HOME /oracle8i_HOME_PATH...
    setenv LD_LIBRARY_PATH /oracle8i_HOME_PATH//lib: etc..
    etc...
    then
    you could validate by doing echo..
    echo $ORACLE_HOME
    echo $ORACLE_SID
    now try svrmgrl
    this should work..
    as far as 9i you no longer have svrmgrl..
    you have to apply the above method and log into the sqlplus.
    hope this help...
    If there is a specific question email me [email protected]
    good luck.

  • HT4111 can headset and bluetooth speaker work at the same time?

    On my iPad, can the headset option and a bluetooth speaker work at the same time? I am using the headset to listen to music, but I want my spouse to be able to hear the same music using a wireless bluetooth speaker in the other room.

    Sorry, of course I tried it and it did not work!
    To clarify, can it be MADE to work? The basic hook up does not seem to allow for both. I was hoping an intellengent, helpful person might be able to assist a novice.

  • Can we get a output in different languages for the same configuration

    Hi All,
    Can we get a output in different languages for the same configuration done in NACE. or it is language specific.
    They have symbols which have values both in german and english. But when we run the transaction we are getting the output only in german language.We want the out put in english
    language.
    Thanks in Advance.
    Rajesh

    A Smartform can be maintained in many languages other than the language that it is created. Translations for the texts have to be maintained for this purpose.
    To maintain the translations:
    Go to transaction SE63 in R/3.
    Go to menu Translation->R/3 Enterprise->Other Long Texts
    Select the object type in the pop up. Smartform(SSF) object type is found under Forms and Styles(FS).
    Enter the name of the Smart form and choose the source and target language. This would open a screen with the Smartform code in Source language on the top and an editor with the same code in the bottom.
    Find the text for which you need to maintain the translation and insert the translation in that place. As usual after required texts are maintained Save and Activate.
    To see the translated Smartform create an output type and assign the smartform and the driver program to this output type. In the transaction that sends output to this smartform, select the output type and select the language in which the smartform has to be displayed (translations have to be maintained in this lanuage).This will give the smartform in the required language.
    Madhavi

  • I want to teach adobe illustrator to my students. If I buy CC-illustrator, Can we work  in the same time with each devices with my ID ?

    I want to teach adobe illustrator to my students. If I buy CC-illustrator, Can we work  in the same time with each devices with my ID ?

    No you have your own ID number

  • I have a library set up for my i-pop touch, how can my wife set up her i-phone on the same pc?

    I have a library set up for my i-pod touch, how can my wife set up her i-phone on the same PC but with a seperate library location?

    You can sync multiple iPods and iOS devices with the same iTunes library on one computer. Each device has its own sync preferences with iTunes and iTunes creates and updates a separate backup for each device.
    Under the same computer login account, you can have separate iTunes libraries which will require manually having to log in and out of each one with iTunes which isn't necessary.
    If you want separate iTunes libraries for you and your wife, probably best to create a separate computer login account for your wife where her iTunes library is completely seperate along with the rest of her data on the computer.

  • Headphones and Speakers at the same time on ZS 2

    Hiya
    I have the Audigy 2 ZS sound card.
    I have a set of normal speakers with the one connector and a set of headphones that has 2 connectors, one for the mic and one for the headphone speakers. This is also a USB set so i have that option aswell.
    Now i know i can put the headphones in the front panel but i dont really want to do this as my pc would mean have the fron panel open.
    My question is, how am i able to use both the headphones and speakers at the same time. At this moment if i plug the USB headphones in they take over and no sound comes out of the speakers.
    I would like both if poss
    Thx
    Paul

    You can get a stereo splitter adapter/cable and with it, you can have the headphone and speaker connect to the same output jack from the soundcard.
    Jason

  • Can you pass multiple files to Business Catalyst at the same time?

    I need to pass information from a client. The infromation is split into several files. I can not access the files to combine them to send as one document to BC. Can I send the two files over even though they do not full fill the necessity of all the user information. File 1 is the personal information and has no other details. When this fill crosses over BC accepts with no trouble. When the second file goes across the personal information is not there but the form details are and this file wipesout the DB. Going through debug when the first file executes I see the data on the BC side. When the second file executes the data is all gone. I cannot combine both files to create one document. Files do not have the same number of users so import of file with file helper would not work since it needs to meet certain requirements to process correctly everytime. By combining the two files would give a different number of tabs than what file helper is looking for and by that matter the data may not be in the correct order. Retrieving the data from the file also would not work since I would have to retrieve from both files at the same time and there would be issues if the user does not occur on both files.
    Please help.
    Thank you,
    Carlos

    Wilderness08 wrote:
    To save time with videos that are not critical, can you capture one video to Premiere Pro at the same time you are authoring to Encore a previously captured video?
    The short answer is yes.
    I have just done that and I am happy to report that it worked like a charm.
    I captured from a DVCAM tape via firewire using PPro CS6 while authoring a Blu-ray disk in Encore CS6.
    No frames were lost during capture and my test blu-ray project was completed without a hitch.

  • How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interrupti​on.

    I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
    So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
    Thank you in advance.
    Regards,
    Attachments:
    HP8563E_Query_Amplitude.vi ‏37 KB

    Hi,
    Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
    So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
    I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
    So I want to acquire 1 time amplitude from spectrum analyser each 5
    period of the signal that I am acquiring from parallel port.
    So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
    Here is a new algorithm.
    1) i=0 (counter: number of period)
    2) I read value from In Port
    3) If I acquire a period
    i= i+1 (another period)
    4) If i is multiple of 5 (If I read 5 period)
    acquire 1 time amplitude and write to the same
    file this amplitude and the corresponding distance
    Distance = 12*i). Remember each period of signal
    Corresponds to 12 Inches).i has to take these
    values: 5,10,15,20,25,35,40,45,50,55,60............
    5) Back to 2 if not stop.
    Thank you very much for helping me.
    Regards,
    Attachments:
    Acquire_Amplitude_00.vi ‏59 KB
    Figure_Algorithm.doc ‏26 KB

  • All apps stop working at the same time?

    AOL Radio
    Banner Free
    Bubble Wrap
    Clock Art
    iChoose
    Kaleidoscope Lite
    Know on wood
    Magic 8 Ball
    Speed Box
    After getting those 'free apps' from the app-store (directly with my iPhone3G)... they all worked fine for 1-2 days. I ran them many times without problems.
    Now they all stopped working at the same time. (They attempt to load... their main screens appear... then they just exit back to HOME instead.) Web-apps and built-in Apple software, all works fine.
    I've tried powering the iphone up/down several times.
    I've also tried deleting 1-2 of the apps from the phone... and the re-syncing.
    Same problem.
    Are there 'fixes' better than:
    Drive 1,000 miles back home and re-sync all your apps.
    Restore the phone and lose all my settings.
    Search, find, download, and re-install all the apps over again. (What if I had >100????)
    I need a 100% reliable phone... all the time.
    At any time... all my apps might instantly stop working for unknown reasons???
    (Itunes=v7.7.1.11 iPhone3G=2.0-3A347 PC=Windows Xp Pro)

    same thing happened to me, I think it has something to do with itunes 7.7.1
    I'm beginning to think you are right... but is there another way to copy things
    from PC to iPhone... without ever using iTunes?
    or... maybe it's not iTunes:
    ... since I downloaded all my apps direct from iStore->iPhone... wouldn't
    sync'ing them only copy them from iPhone->PC? (So how could iTunes be the
    problem... since it shouldn't really be 'writing' any apps TO the iPhone.)
    Or would copying songs (I only did 1) and MP4 video (I only did 1)... from
    PC->iPhone... somehow affect all my apps?
    With all the powerful things iTune does... I would think a simple "copy command" from PC to iPhone... wouldn't run the risk of damaging all my apps on the iPhone. Or could it?

Maybe you are looking for