Can I get a history of calls I made on a prepaid plan?

Great question, yasure! For information about your call details, please reach out to our Prepay Customer Service team at 888-294-6804.
Thanks,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Can i get the history tab in query designer in bw 3.5 version

can i get the history tab in query designer in bw 3.5 version plz help me.

Hi,
yes..
do this..
Go to SPRO->IMG->SAP NEtweaver->SAP BIW->Reprting-relevant Settings->General Reporting Settings in BEx->Activate personalization in Bex.
Regards,
San!

How can I get the history of the subprogram i.e Procedure ........?

How can I get the history of the subprogram i.e Procedure ........?

annu_rajput wrote:
I mean I want to see .
When procedure was created.?
what was the original code ..?
what are the modification done since ..?
who has modified it ......?This is not a task for Oracle. This is a task for a version control system.
You can see when a procedure has been created in ALL_OBJECTS (CREATED and LAST_DDL_TIME columns) but even using flashback queries on this table you don't expect to go back for long.
Definitely you cannot see who has modified it. You can only see the procedure owner.
Again, Oracle is NOT a version control system. You are on the wrong way.
Regards.
Al

When I facetime the ipad (email address) it calls my phone. The accounts are completely separate. How can I get this to only call the ipad and not my phone as well?

When I facetime the ipad (email address) it calls my phone. The accounts are completely separate. How can I get this to only call the ipad and not my phone as well?
It calls both the ipad and iphone when calling the associated email address for the ipad. However, when I call the iphone it does not call the IPAD.
Thanks for your help

Are you trying to message another Apple device?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

I always chose "save & quit" when I close and sometimes all my history is gone when I open Firefox again. Why? It just happened again. Can I get that history back?

I always chose "save & quit" when I close and sometimes all my history is gone when I open Firefox again. Why? It just happened again. Can I get that history back?

You get message "firefox is still running" and computer restart doesn't help you. Try the advice below.
Make sure Firefox isn't running (end firefox.exe process in Task Manager or restart computer)
Find your profile folder
C:\Documents and Settings\USERNAME\Application Data\Mozilla\Firefox\Profiles\xxxxxxxx.default
find file "parent.lock" in it and delete it (the file is empty, its function is to signify to Firefox whether it's already open or not).
Then try to open Firefox again. Will it start or not? What will it say?

Where can I get a number to call a apple representative to speak to me right now?.

Where can I get a number to call a apple representative to speak to me right now?.

If you want to talk to Apple Support:
http://support.apple.com/kb/HE57
They do not offer 24/7 support, so whether you'll get through to them immediately will depend on when you call.
Regards.

How do get a history of call from contact

How do I get a history of calls from a contact?

Either under Recent Calls or by searching through your call history from your billing statement with your carrier.

How can I get a refund for a purchase made by a minor?

how can I get a refund for a purchase made by a minor?

You contact iTunes store support and plead your case. YOU are responsible for the security of your Apple ID and password. There are numerous mechanisms in place to make it easy to prevent unauthorized purchases. IF they agree to give you a refund, they will not do so a second time.

How can i get a refund for unauthorised purchase made by my 6 years old child? I tried in customer service and told me to write a email but I don't know where i have to.

How can I get a refund for unauthorised purchases made by my 6 year old son. And he purchase games 1200€ With in 3days. How it's possible?

I'd follow the "report a problem" link
http://www.apple.com/support/itunes/account/

Can my iphone 4 be put on the $100 one year prepaid plan?

Can my iPhone 4 be put on the $100 one year prepaid plan?

Great question MissRocky03,
Not all device are compatible with our prepaid services. Please reach out to prepaid customer service at (888) 294-6804 to confirm device compatibility.
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/VZWSupport

Can i block a no caller id number from my prepaid plan?

i keep getting a bad prank calls from people saying rude things and i need to block them my son answered my cell phone and herd some frighting stuff so i need to make it so blocked or no caller ids can call me any more? my phone is the prepaid iphone 4

There's not much you can do. You can't block a number when there is no number. Verizon can not see the number when they are blocked. So no way to block a "no caller ID" or "Private" or whatever it says. They probably use *67 to block their number. You can use *77 to send them a message to reveal their number if they want to reach you. *87 will disable that. Try to ignore those calls. Talk to your kid/kids about it. If it says "Unknown Caller", don't answer. But if you can, *77 is effective.

I can't get two "room" objects to "glue" together in a floor plan

I can 't get two rooms to "glue" together in Visio 2010.
I've tried several ways to drag the "room" objects and handles around the floor plan but not only do the rooms not glue to each other, they snap or glue to other things (like ruler divisions), making it almost impossible to get the room walls to
overlap cleanly.
I found a forum posting somewhere where the respondent only suggested verifying default settings and I matched mine up with those, but that thread went cold without a solution.
What settings are required, and what steps are required, to glue two "room" objects together in Visio 2010?
Wayne Erfling (aka Cornan The Iowan)

Thanks, George,
You began your message with a question, but I think you understand "why I would want rooms to snap together", thus your work-around.
Nonetheless, the "big answer" is that I want to set the
room dimensions for each room individually (we're using Visio to place our belongings within each room) and then snap the rooms together to "build the house".
I started out by creating several rooms with correct dimensions (which I then locked with Developer / Protection).
That's when I discovered that the rooms "wanted" to snap to ruler divisions and geometry instead of to each other.
It's pretty clear that the room design templates / stencils in Visio 2010 have limited functionality - the "convert to walls" feature, for example, generates some pretty horrendous artifacts.
The second most irksome problem is connector routing - I've spent an hour or two doing nothing more than removing excess connection points because connectors insist on routing around some shapes, generating bizarre, wandering paths that I can't seem to disable.
But still, Visio 2010 is better for this purpose than CorelDraw and far better than "SmartDraw", and I don't have any CAD software. I just doubt that Microsoft has made Visio 2013 any better - Microsoft
seems to flip between simple maintenance releases and "grand" rewrites, failing to embrace anything like "continuous improvement".
Finally, the ribbon, a "blonde" solution at best, is particularly horrible in Visio - much of my work on this drawing has required me to switch among ribbon tabs.
Sorry for the rant, George, but anything I can learn to help with these issues will make the remainder of the job better.
Wayne Erfling (aka Cornan The Iowan)

Verizon iphone. how can i get to the home screen without activating it on a plan

how can i get to the home screen without activating it on a plan

Unless it is a 3rd party cord, there is no cord that just goes from the phone to the wall. However, you will need a cord that connects to the computer and the phone. The device is in recovery mode and you will need to restore it. See this support document for the instructions. http://support.apple.com/kb/HT1808

Is there anyway I can get an upgrade even though I'm on a prepaid plan? Ive been with verizon for years.

I've been a loyal customer to Verizon. I am still contemplating switching to a bill instead of prepaid but in the mean time I was wondering if Verizon had a way for prepaid customers to get upgrades.

That makes no sense. People get subsidized upgrades because they are agreeing to a 2 year contract. You don't have contract with pre-paid so no you can't get a discounted phone for pre-paid. And if you go on postpaid you might want to re-think about taking that subsidized upgrade because you must realize you are locked into a 2 year contract and you won't get to upgrade before then. Unless you need more than 6.5 GB of data I'm not sure why you would switch from pre-paid.

How can I get error message when calling pl/sql

Hi,
I call a pl/sql java wrapper generated by Rosetta.
public static void startWf(
OracleConnection _connection,
BigDecimal p_goal_header_id,
BigDecimal p_submiter_userid,
String p_commit,
String p_init_msg_list,
String [] x_return_status,
BigDecimal [] x_msg_count,
String [] x_msg_data
) throws SQLException
the pl/sql is written by the standard way of OAF backend,
PROCEDURE start_wf ( p_goal_header_id in number
          ,p_submiter_userid     in number
,p_commit in varchar2 DEFAULT FND_API.G_TRUE
          ,p_init_msg_list in varchar2 DEFAULT FND_API.G_FALSE
,x_return_status out varchar2
,x_msg_count out number
,x_msg_data out varchar2);
when running this procedure in TOAD, in case of error, following script can print error message:
if l_return_status <> 'S' then
dbms_output.put_line('Result');
dbms_output.put_line('status: '||l_return_status);
dbms_output.put_line('error count: '||l_msg_count);
dbms_output.put_line('Loop Error');
dbms_output.put_line('Err: '||fnd_msg_pub.get(-1,p_encoded=>'F'));
for i in 2..l_msg_count loop
dbms_output.put_line('Err: '||fnd_msg_pub.get(p_encoded=>'F'));
end loop;
end if;
if l_return_status = 'S' then
dbms_output.put_line('Success');
end if;
end;
My question is when calling pl/sql java wrapper from Java, in case of Error, return_status="E", then in order to get exact error msg, is there any equivalent java method such as get error from pageContext or OADBTransaciton.. etc instead of calling again pl/sql fnd_msg_pub.get to get error msg?
thanks
Lei

Lei,
You can use
checkErrors(OADBTransaction pTx,
int pMessageCount,
String pReturnStatus,
String pMessageData)
method in OAExceptionUtils Class.For details look at javadoc of OAExceptionUtils Class.
--Mukul

Can I get a history of calls I made on a prepaid plan?

Similar Messages

Maybe you are looking for