Can I get a page count on a powerpoint stored in a BLOB?

I have an app which indexes powerpoints and stores them in a blob.
I'm wanting to add a highlights page, where someone manually enters pages from the powerpoint into certain categories, to be displayed as a "check out these".
I'm thinking for the uploader it'd be ideal to have a list of the categories on the left, and then a multi-select box on the right with all the pages in the powerpoint. Does anyone know of a way I can pull out how many pages are in each document so I can populate this box?

Unless the page is so complex that redoing it from scratch like Wyodor suggest would take so much time you can try the following:
1 - rename the backup domain file and put it in your User/Library/Application Support/iWeb folder along with the current domain file.
2 - download iWebSites and launch.
3 - select the two domain files and use the Merge button. This will create a 3rd domain file with both sites inside.
4 - open the merged domain file with iWeb and drag the pages you need from the backup site to the working site.
Now, does that sound like less time that recreating from scratch? If so go for it.
Happy Holidays

Similar Messages

  • How do you get the page count on an old hp 1012 laserjet printer?

    How do you get the page count on an old hp 1012 laserjet printer?

    You should find this information on the configuration page. To print a configuration page, press and hold the green GO button until all of the lights cycle, approximately five seconds, then release the button. The Configuration Page will print.
    You can find more information in this document: Identifying Page Count.
    I am an employee of Hewlett Packard.
    - - Please mark Accept As Solution if it solves your problem so others can more easily find the answer - -
    - - Please click the Kudos star if you would like to say thanks - -

  • Only the first page is printed reduced as setup. All pages afterward are full size with information cut off. Recent problem. Can print from Safari just fine. How can I get all pages to be reduced size?

    Question
    Printing internet pages
    Reduced print size
    Only the first page is reduced and printed as desired
    All pages after the first page are full size with information cut off
    Recent problem never seen before
    Can print from Safari and other software just fine
    How can I get all pages to be reduced size?

    One suggestion worked from the Firefox prints incorrectly link mentioned above by mha007. I'm thrilled since this has been annoying me for weeks. Thanks mha007!
    Reset all Firefox printer settings
    # Open your profile folder:
    # On the menu bar, click on the Help menu and select Troubleshooting Information. The Troubleshooting Information tab will open.
    # Under the Application Basics section, click on Show in Finder. A window with your profile folder will open.
    # Note: If you are unable to open or use Firefox, follow the instructions in Finding your profile without opening Firefox.
    # On the menu bar, click on the Firefox menu and select Quit Firefox.
    # In your profile folder, copy the prefs.js file to another folder to make a backup of it.
    # Open the original prefs.js file in a text editor (such as TextEdit).
    # Remove all lines in prefs.js that start with print. and save the file.
    # If something goes wrong when you open Firefox, close it again and overwrite prefs.js with the backup you made.

  • A year later...same question: How can I get a Pages document embedded ???

    How can I get a Pages document embedded into an email? (so that the recipient sees it immediately and does NOT have to open a PDF). Although I know a PDF is universal and would allow anyone (mac or not) to open, read and see my business newsletter, I want it to be instantaneous for viewing. So, which leads me to a question I've kicked around for a year now on this discussion board. How do I turn a Pages doc into html for email purposes? If there isn't a way with Pages, How about with Word (the newest version) for Mac? Someone has to know this art, I receive emails like this all the time, probably from Apple! ha ha .
    Please help!
    -dnorheim

    dnorheim wrote:
    How can I get a Pages document embedded into an email? (so that the recipient sees it immediately and does NOT have to open a PDF).
    we can't !
    Although I know a PDF is universal and would allow anyone (mac or not) to open, read and see my business newsletter, I want it to be instantaneous for viewing.
    In Mail.app, single page PDF are directly readable so you may try to
    print your page #1 in a PDF
    then
    print your page #2 in a PDF
    and so on.
    So, which leads me to a question I've kicked around for a year now on this discussion board. How do I turn a Pages doc into html for email purposes?
    we can't !
    As Apple removed the export to html feature, I assume that it's no to reintroduce it one day
    Yvan KOENIG (VALLAURIS, France) lundi 7 septembre 2009 17:50:32

  • Pages doesn't offer HTML, how can I get a Pages doc to be embedded?

    How can I get a Pages document embedded into an email? I do not want to turn it into a pdf... what are my options. I have Freeway 5 Express if this helps.
    How-to's and suggestions welcome.

    What exactly do you mean? Do you just mean you want to be sure it shows as an inline attachment? You can't really control that, if so, since it depends on the recipient's mail program/server/personal settings. This is true for real HTML mail, too.
    There is nothing to guarantee that if you could easily convert a pages document to HTML, the recipient would not receive it as just an attachment. In any case, I suppose you could copy/paste into a freeway file, publish that to the desktop and attach it, but really, PDF is a much, much better choice.

  • My InDesign document has two page 1s and I can't get the page numbers to work.  Help!

    My InDesign document has two page 1s and I can't get the page numbers to work.  Help!  How do I fix this?

    Do you mean the first section is starting at page one?
    And the second one now is starting at page two?
    So I would ask why you would need sections at all?
    Did you set the controls for Automatic Page Numbering?
    If you select the particular page where section two is starting in the Pages Panel, you could untick the Start Section option in the numbering and section dialog. That would remove the section. You cannot do that with the very first section, but you should set the first section to Automatic Page Numbering if you ever want to use your document with an inDesign book file.
    Uwe

  • How can I get the page to curl when turning to the next page in iBooks author?

    How can I get the page to curl when turning to the next page in iBooks author?

    I don't think you can. If you need that effect, you should use ePub (that can be authored via Pages) not iBA.
    I hope Apple give us the option in the future though.

  • How do I get a page count from the HP Photosmart 5514?

    How do I get a page count from the HP Photosmart 5514?

    Simple.  Access the printer web gui by typing in the printers IP address into your browsers address bar.  Select Tools/Usage reports.  Done.

  • Bought a Mac 10 days ago can I get the pages app free

    Bought a Mac 10 days ago. Can I get the pages app free?

    https://uptodate.apple.com/welcome?locale=en_US

  • How can I get the shutter count for my Canon 7D Mark II using Windows XP?

    How can I get the shutter count for my Canon 7D Mark II using Windows XP? I've been looking lots of places and doing some file uploads, but I can't seem to find anything. I'm wary of downloading software I know nothing about. Any help is greatly appreciated.
    Solved!
    Go to Solution.

    Nevermind, just, sort of answered my own question. Doesn't work on XP, but using a Win 7 'puter I was able to use Shutter Count, which now works w/ the 7D Mark II.

  • How can i get the time to appear on my stored data in notepad

    Hi all,
    I was wondering how can i get the time to appear on my stored data in notepad? I saw an example before but i forgotten which example was it.. Any ideas??
    holla
    Attachments:
    TextFile1.txt ‏3 KB

    Hi
    Im using Labview 8.2. Currently it just shows the data without the time. Im not sure what to do. It works perfectly though. I just want the time to appear on my notepad along with my data
    holla
    Attachments:
    Testing1.txt ‏1 KB
    Untitled 231_LV80.vi ‏23 KB

  • HT3775 How can I get a youtube video that I have stored on a flash drive to play?

    How can I get a youtube video that I have stored on my flashdrive to play?  I have tried to open it with quicktime but it still will not open.

    Have you tried VLC ?
    http://www.videolan.org/

  • How to get the page count of a tiff image:

    Hi,
      My process takes input (of document type) tiff image. I want to get the number of pages present in the tiff image into one of my process variables.
    How can I get that?
    Thanks,
    kc

    Hi
    I'v tried rennie1's way ,but I only get zero,my code is:
    rs.executeQuery("select count(*) from t_test");
    if (rs.next()) int rowCount=rs.getInt(1);
    I also tried barni's way ,but the method rs.last() and rs.beforeFirst() throw a same Exception
    I tried another way,the code is:
    while rs.next(){
    // Do nothing ,just move the cursour to the last row
    int rowCount=rs.getRow()
    However,the rowCount still equal zero
    Any help would be greatly apprecite!
    note:
    I get connection by DataSource's JNDI name from client, the Server is Weblogic Server 6, the DBMS is Oracle.

  • How can I get an accurate count of computers (workstations) logged in to my SQL Server database?

    We license our software by number of workstations.
    I have a query that I have used for years to get an accurate count of the workstations logged in to my SQL Server database. For simplicity, all users use the same login name/password. This is built in to the script that attaches to the DB. They
    have access only to that DB with the exception of
    USE [Master] GRANT VIEW SERVER STATE to MyUser
    The query that has been working is below:
    Basically this relies on the mac address (Master.dbo.sysprocesses.net_addre
    SELECT COUNT(Users) AS UserCount FROM (SELECT COUNT(Master.dbo.sysprocesses.hostname) AS Users FROM Master.dbo.sysprocesses LEFT OUTER JOIN Master.dbo.sysdatabases ON Master.dbo.sysdatabases.dbid = Master.dbo.sysprocesses.dbid WHERE (Master.dbo.sysdatabases.name = 'MyDatabase') GROUP BY Master.dbo.sysprocesses.net_address) AS UserCount_1
    ss), since both Workstation names and ip addresses can be duplicated.
    Recently this has stopped working at a number of customers. Suddenly individual workstations are showing multiple net addresses for the same workstation causing a substantial overcount of users. This may be related to SQL Server 2012 - not sure.
    What I need is a very reliable way to get a count of workstations logged in to my database.
    If anyone can tell me why I am suddenly getting multiple net_addresses for each workstation and how to prevent that that would be one possible solution.
    Otherwise if anyone can give me a rock solid way to get a workstation count other than the above that would be great. Our largest customer is 50 users by the way.
    Thanks in advance for any help.
    Kim

    I think your count is getting skewed because of duplicate rows in sysprocesses because of parallelism. Add DISTINCT to your query:
    SELECT COUNT(Users) AS UserCount
    FROM
    ( SELECT COUNT(DISTINCT Master.dbo.sysprocesses.hostname) AS Users
    FROM Master.dbo.sysprocesses LEFT OUTER JOIN Master.dbo.sysdatabases
    ON Master.dbo.sysdatabases.dbid = Master.dbo.sysprocesses.dbid
    WHERE (Master.dbo.sysdatabases.name = 'MyDatabase'
    GROUP BY Master.dbo.sysprocesses.net_address) AS UserCount_1
    Satish Kartan www.sqlfood.com

  • How can I get the page loading in progress indicator visible as in 3.6??

    1)
    When a page takes long to load it would be nice to see its progress, if any, as I used to have in the earlier 'FF-version. Is it possible somehow?
    2)
    If I choose "no tabs" to save space on screen can I get the tabs visible when needed, without going to preferences?

    1. https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/
    2. That pref suppresses the Tab bar when there is only one Tab open. With two or more Tabs Firefox should always show the Tab bar. ''Unless you are referring to a preference added to Firefox by an add-on.''

Maybe you are looking for