Can I get back a pages document which I closed before saving?

can I get back a pages document which I closed before saving?

The answer is no, even if you're using OS X Lion. (You don't mention what version of OS X or Pages you use.)
OS X Lion and Pages 4.1 autosave documents, even unsaved documents. But if you close an unsaved document, click the Don't Save button, then this document no longer exists.
Earlier versions of OS X and Pages do not autosave documents. So closing an unsaved document effectively deletes it.

Similar Messages

I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available?

I currently have iPhoto 8.1.2 on my macbook pro and am trying to update to the latest version. I have had to work backward, but I can only get back to 9.1, which will not install because it says I need at least 9.0 to install it. Is 9.0 available? Will I need to go back even further? Thanks

Upgrading from iPhoto 8 to iPhoto 9 requires a purchase. There are two ways to get to iPhoto 9:
1 - purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com or eBay.com.
2 - if your MBP meets the requirements upgrade you system for free to Mavericks. Then you can purchase the latest iPhoto version, 9.5.1, from the App Store.
OT

How do i return calendar to original view?   All I can see is an hour by hour grid...can't get back to page where I can enter new appointments/events

How do I return calendar to original view?   All I can see is an hour by hour grid...can't get back to page where I can enter new appointments/events

     Hi, at the bottom bar you should see a series of five buttons. Press the "Month" button if you desire to see the view of the month. As for creating a new calendar event simply press the "+" button in the upper right-hand corner to create a new appointment. *
* Please note that this is all within the app called "Calendar".

Can I retrieve a Page document I just closed without saving? (-:

Can I retrieve a Page document I just closed without saving? (-:

If the OP's information is correct (Snow Leopard), there is no autosave.
Otherwise, the idea that you must save once before autosave kicks in seems to be one of those bits of misinformation that gets repeated so many times that everyone starts to believe it. I never used Lion or Yosemite, but certainly with Mountain Lion and Mavericks, autosave does save documents before they are saved to a real file. Since that is essential to the ability to restore open windows on relaunch, I am pretty sure it also applies to the systems that I haven't used.
I think the system may not keep versions until a document is explicitly saved.
Closing an unsaved document will discard the autosave information in any case, but, at least with the way I've had my preferences set, it does throw up a dialog asking you to confirm that you want to discard the data.

How can I get INSTID_B for the documents which are stored using Store Business Document functionality

Dear experts,
I had activated the functionality of Store Business document and successfully stored documents in external server.
My client have a custom function module which is used to send emails.In that FM they used SO_DOCUMENT_READ_API1, SO_DOCUMENT_SEND_API1 function modules.They passed Instance Ident(SRGBTBREL->INSTID_B)(eg: FOL33000000000004EXT39000000000026) as export parameter to the FM 'SO_DOCUMENT_READ_API1' and get the attachment details and content.
Here my problem is I do not have entries in the table SRGBTBREL for the documents which are stored using the Store Business Document functionality and without INSTID_B I am unable to use the FM 'SO_DOCUMENT_READ_API1' to get the document details and content. Please help me to find INSTID_B for documents which are stored using Store Business Document functionality or please let me know if there is any other way to use FM 'SO_DOCUMENT_READ_API1' for documents which are stored using Store Business Document.
Thanks in advance.
Regards,
Kiran

Hi Kiran,
You can use the following method to get the information. For example if you want to get BO documents for a customer
CALL METHOD cl_binary_relation=>read_links
   EXPORTING
     is_object           = ls_lpor
     it_relation_options = lt_relat
   IMPORTING
     et_links            = lt_links.
then fill ls_por-instid with a customer number (KUNNR), ls_por-typeid = 'KNA1' and ls_por-catid = 'BO'.
Table lt_relat should contain a line option for each document type (for example 'I' 'EQ' 'NOTE', 'I' EQ 'ATTA', 'I' EQ 'URL', ...
In table lt_links you will get your information.
Maybe some other methods of class CL_BINARY_RELATION may also solve your issue.
Regards,
Klaus

How can I get my exported pages document to appear the same in pdf?

When I export my document to pdf, the font color for those that I have reversed (white color) appear black and don't show up because the background is black. I've tried exporting my file 10 times and it appears to be different on many occassions. I can't get the entire document to appear correctly. Help!

Would you mind sending me the Pages document for me to try myself. I don't have MacOs 10.7.5 but I have 10.6.8, 10.8.x and 10.9.1. I can try Pages 08 on all of them. Click on my blue alias and youl'll find the address.

How can I get back a pages file and its backup if I did not save them to my documents?

Hallo community!
My mac got stock on a website because of a java update so I was forced to shut down the computer using the on-botton. Upon restarting my work on Pages I clicked on the file I was working on so as to open both the file and pages but the file wouldnt open. I checked if I had also saved the file on my documents to try to restart it from there. But this file comes originally from a USB which I dont have at this moment although I could kee on working on this file without the usb. The file is not my documents yet it shows on the last files-list of pages.
I cant open this file anymore, maybe because I did not save it to my files. Although this is strange because I even named another file I worked on along this first document. Enfin, the first file even has a backup according to the list but the backup wont open either. I don't know how to get this file back I am in big trouble If I dont get to open it soon! I hope somebody can help me. Anyone knows a trick or something!?

What version of Pages?
It sounds like it may be damaged.
You do not have to save to Documents.
Peter

How can I get back my internet explorer which has been removed when I have downloaded Mozilla Firefox?

I want to download Mozilla Firefox as an optional browser as I can only access a website for work through this browser. However, when I downloaded MF, even though I tick that I do not want it as my default browser or homepage, it downloads, but has removed my Internet Explorer connection. This has happened a couple of times now and is very frustrating. I don't know how to get my IE back and keep the option of MF available. MF seems to automatically delete/remove IE when it is downloaded. I am using Windows 8. I would appreciate help and advice to correct this situation. Many thanks.

Hi, Philipp,
Thank you very much for your prompt reply and support. The IE icon disappeared immediately after I downloaded MF. I tried to download IE again but without success. In the end all my icons on my start page disappeared, although I do not think this was to do with MF. I had to resort to restoring my lap top to factory settings for the umpteenth time and I have now got IE back but no MF. I will keep your advice and will try again when I am feeling brave enough and have sufficient time to try and download MF again. I am not confident with technical problems and greatly appreciate your help and support.
Kind regards, K.

Trying to install - can't get past run page on which I must enter my user name & password - helP!!!

I am trying to initially install firefox - when I get to page where I must enter "user name" and "password," I follow prompt and enter Michele-PC\Michele but nothing happens and I
can't complete installation by getting to Firefox wizard set up
== This happened ==
Every time Firefox opened
== trying to initially install firefox ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)

Is you Windows user account an administrator account? If you don't have proper permission to install software on the system, you need an administrator to enter their username/password

How can I get back next page arrows missing in email?

The next page arrows in my email section is suddenly missing! How do I get them back? Thank You.

Sorry about that happening - has happened to me quite often, too.
Not going to help you now, but I use this extension to automatically "cache" the content of text areas for situations where that may happen.
https://addons.mozilla.org/en-US/firefox/addon/textarea-cache/
The only problem with it is, it save only the latest "state" - no backups beyond what is saved. If something in another tab causes Firefox to crash, you may lose the most recent text that you typed when Firefox was getting ready to crash.

I hit iPhoto send and I get: The email server didn't recognize your username/password combination. -- then can't get back to re-enter, which was correct one in first place.

I have filled out an iPhoto "postcard" format with a message and photo, etc., and when I hit send, I get the message "The email server didn’t recognize your username/password combination." I hit OK but it does not clear to refill the log-in -- and I believe the info was correct to start. I'd like to save (and not have to re-crete) the card, but see no way of doing so, thus am fearful of closing it (for good).

in the iPhoto preferences ==> accounts delete your e-mail account and reenter it
OR
IMHO the better solution is to set Apple mail as the email client in the iPhoto preferences
LN

How can I get a total page count of a PDF before placing every page in the PDF?

Before the [long] spiel, I'm using javascript in InDesign CS3.
I'd like to create a script that places a multiPage PDF in any number of different impositions. (saddle stitch, 4up signatures, 16up signatures etc.)
I've easily created a script that iterates through a PDF and places it into a new document as (4,1|2,3), (8,5|6,7) etc, which works for printing in duplex, folding each page in half, and gluing the resulting spines to make a simple thick book (for PDFs with more than, say, 64 pages).
However, the next step is to re-write the script to create a saddle stitch document (16,1|2,15), (14,3|4,13) ... (10,7|8,9). For this I need to know how many pages there are in the PDF before I start placing the PDF pages, and then making the new document [int((PDFpages+3)/4)] pages long.
Is there a simple way to get the count of PDFpages without going through a loop and placing the next page from the PDF until the placed page number equals the first page number?
This way seems wasteful:
var totPDFPages = 1;
app.pdfPlacePreferences.pageNumber = totPDFPages;
myPDFPage = sheetFront.place(File(srcPDF), [0,0])[0];
var pdfFirstPage = myPDFPage.pdfAttributes.pageNumber;
while (doneCounting == false) {
totPDFPages += 1;app.pdfPlacePreferences.pageNumber = totPDFPages;
myPDFPage = sheetFront.place(File(srcPDF), [0,0])[0];
if (myPDFPage.pdfAttributes.pageNumber == pdfFirstPage) {
totPDFPages -=1;
doneCounting = true;
alert("PDF has " + totPDFPages + " pages!");exit();
myPDFPage.remove();
NB. Javascript above *hasn't* been run, but should look similar once debugged.
The only thing I've though of to relieve the sheer duplication of placing the PDF twice (once for the count, and once for the imposition), is to create an array of impoPages[counter]=myPDFPage, and then shuffle the pages referenced by the array to the correct sheet and position.
It'd be much easier to be able to assign pageCount = File(srcPDF).pageCount !!!
Thanks for any help/tips or even a simple "What are you smoking, man!?"
Cheers,
Jezz

this will get almost all pdf pages count.
jxswm
function getPDFPageCount(f){
if(f.alias){f = f.resolve();}
if(f == null){return -1;}
if(f.hidden){f.hidden = false;}
if(f.readonly){f.readonly = false;}
f = new File(f.fsName);
f.encoding = "Binary";
if(!f.open("r","TEXT","R*ch")){return -1;}
f.seek(0, 0); var str = f.read(); f.close();
if(!str){return -1;}
//f = new File(Folder.temp+"/123.TXT");
//writeFile(f, str.toSource()); f.execute();
var ix, _ix, lim, ps;
ix = str.indexOf("/N ");
if(ix == -1){
    var src = str.toSource();
    _ix = src.indexOf("<< /Type /Pages /Kids [");
    if(_ix == -1){
      ps = src.match(/<<\/Count (\d+)\/Type\/Pages\/Kids\[/);
      if(ps == null){
        ps = src.match(/obj <<\\n\/Type \/Pages\\n\/Count (\d+)\\n\/Kids \[/);
        if(ps == null){
          ps = src.match(/obj\\n<<\\n\/Type \/Pages\\n\/Kids \[.+\]\\n\/Count (\d+)\\n\//);
          if(ps == null){return -1;}
          lim = parseInt(ps[1]);
          if(isNaN(lim)){return -1;}
          return lim;
        lim = parseInt(ps[1]);
        if(isNaN(lim)){return -1;}
        return lim;
      lim = parseInt(ps[1]);
      if(isNaN(lim)){return -1;}
      return lim;
    ix = src.indexOf("] /Count ", _ix);
    if(ix == -1){return -1;}
    _ix = src.indexOf(">>", ix);
    if(_ix == -1){return -1;}
    lim = parseInt(src.substring(ix+9, _ix));
    if(isNaN(lim)){return -1;}
    return lim;
_ix = str.indexOf("/T", ix);
if(_ix == -1){
    ps = str.match(/<<\/Count (\d+)\/Type\/Pages\/Kids\[/);
    if(ps == null){return -1;}
    lim = parseInt(ps[1]);
    if(isNaN(lim)){return -1;}
    return lim;
lim = parseInt(str.substring(ix+3, _ix));
if(isNaN(lim)){return -1;}
return lim;

How can I get back to Flash Builder 4.5 ?

I have Flash Build 4.6 in the creative cloud monthly subscription.
Design mode does not work in 4.6.
All the tutorials are currently using 4.5 and the functional design mode.
How can I get back to 4.5 which actually works?

No error, just a blank white area. When I drag things to it I get a NO sign like the Ghostbusters sign, forgot what that's called.
When I breifly had 4.5, I could easily drag things over and create sites. Then it automatically upgraded and suddenly, doing the exact same things, stopped working.
I'm still learning FB so I can't convert to pure code yet. If I can't get the design mode to work then I'll be dumping FB since I can't follow any of the tutorials.

I've managed to get back to Pages 4.3 and delete the downgrade Pages 5, which makes a total mess of any doc prepared with it, but how to I get back to the old version of Pages on my iPad so that I can work while I am away from home.

I've managed to get back to Pages 4.3 on my iMac and delete the downgrade Pages 5, which makes a total mess of photo-rich documents prepared with Facing Pages (most of mine), but how to I get back to the old version of Pages on my iPad so that I can work on sections away from home. At least on my old PC, Word maintained compatability with old versions. Beginning to regret having switched.

Thanks for your help. What is really irritating is that Apple give a big hurray about what they have added as "new" in Pages 5 (most of it pretty useless) without telling you of the myriad things they have deleted. If they had shown the list your gave the link to, I doubt may regular users would risked going to Mavericks with its auto upgrade. My partner got the message in time and is sticking with the earlier operating systems and Pages on Mac and iPad. Lucky girl.
I have found a way to use my iPad to add chapters written while on the move to reports on my iMac Pages 4.3. If I write it on the new Pages on the iMac (don't seem to be able to revert there), the send the report as an email in WORD format (not Pages) and download it in the Text Editor, then cut and paste into the story on the iMac. Hardly elegant but it works.

How can I get back into my application aftermath invoking Start up page of index.htm ?

Gorgeous Hello All,
If anyone of you can please provide me a solution for the following, will help me in plentious and galore.
Am using Adobe RoboHelp, Version 10 and IE version being 10.
A hurdle :-
I have a application which has been developed in ASP .NET, Version 4.0. Help link has been created in this application wherein here the Start up page of index.htm has been linked to be read from the RoboHelp local project folder\!SSL!\Multiscreen_HTML5\desktop. All are working absolutely fine except when
I login into the above-said application -> click on the Help page -> the index.htm opens with Contents, Index, Glossary -> Am able to successfully perform any task by respective clickings
-> But I am not able to get back into my application when I click on the IE provided Back button (Alt+Left) -> Any amount of invoking Back button makes the system getting looped into this Start up page of index.htm only -> When I Close Tab (Ctrl + W) or Close ( X ) -> The window session gets closed and I have to repeat all by relogin once again.
How can I get back into my application aftermath invoking Start up page of index.htm ?
(I can always get back into the application easily by erasing those parts in the url which refers to this RoboHelp linkages – but this certainly looks non-polished work)
Help Please
Cheese – Vipin Nambiar, Bangalore

Hey Jeff, I used Internet Explorer 10.0.9200 and Google Chrome 26.0.1410. Alas - it is the same behavior.
(But Jeff : When I used Microsoft HTML Help as primary layout to generate chm file , My Help when launched from my Application opened in a new browser window and when I closed this Help browser window did not close my application. Looks like need to write few liner code to get this issue settled )
Thanks Indeed of lots for your concerns Jeff !!!

Can I get back a pages document which I closed before saving?

Similar Messages

Maybe you are looking for