Can I get both time and date in every single message that I receive or send?

I have been usine iPhone for a while now, and I was wondering if you can change the message-settings somehow, so that I can see both date and time in every single message, instead of every 30 minutes, is this possible?

Sorry, no.
Suggest such to Apple here:
http://www.apple.com/feedback/iphone.html

Similar Messages

Can I display both time and date on iPhone 4s home screen?

The time and date is diplayed when I 'slide to open' but can I have the day / date and time displayed when the screen shows all the apps? Currently it just shows the time at the very top and considering I'm this is my first iPhone, I've become used to having the date and time constnatly displayed. Any help would be greatly appreciated.

A pity it can't be displayed elsewhere.
Thanks for your prompt help.

How to get current time and date??

How to get current time and date from my PC time and date to the java application??
i use java.util.* package but got error, that is:
- java.util.* and java.sql.* class are match
- abstract class cannot be instantiated
so what can i do, pls guide...thanks...

There is a method in the System class that will return the current system time. You could also instantiate a Date, Time, Timestamp, or Calendar object, all of which get created with the system time by default.
Don't import *. Import the specific classes you need.
Next time, post the actual text of the exceptions/compile errors. If you make people guess, most just won't bother.

How can we get Dynamic columns and data with RTF Templates in BI Publisher

How can we get Dynamic columns and data with RTf Templates.
My requirement is :
create table xxinv_item_pei_taginfo(item_id number,
Organization_id number,
item varchar2(4000),
record_type varchar2(4000),
record_value CLOB,
State varchar2(4000));
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
select * from xxinv_item_pei_taginfo;
Item id Org Id Item Record_type Record_value State
493991     224     1265-D30     USES     fever     TX
493991     224     1265-D30     HOW TO USE     one tablet daily     TX
493991     224     1265-D30     SIDE EFFECTS     XYZ     TX
493991     224     1265-D30     DRUG INTERACTION     ABC     TX
493991     224     1265-D30     OVERDOSE      Go and see doctor     TX
493991     224     1265-D30     NOTES     Take after meal     TX
Above is my data
I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
its a BI Publisher report.
please suggest

if you have data in db then you can create xml with needed structure
and so you can create bip report
do you have errors or .... ?

How can i get the time and result together show in one Array or in Cluster?

hello everyone i am a new user .I want to get the time and voltge form a Generater. How can i get the time and result together show in one Array or in Cluster?When i selecte the first(or third...) result then in the front panel display the time and the voltge.Thank you!
I post the time and voltge NOT together photo
Attachments:
12345.GIF ‏54 KB

You can create an array of clusters with one element being the time and the other being the voltage, like so (using the "Get Waveform Components" function):
Message Edited by smercurio_fc on 10-17-2007 03:15 PM
Attachments:
pic.PNG ‏11 KB

HT1551 My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

I can't set up time and date / no response or it s...

Hi guys
I hope You will help me.
I purchased nokia 5800 (second hand) for my girlfriend this christmas as a present and everything is fine apart 'time and date settings'.
When you going to 'setting' and try to select 'date and time' there is no reaction, if you trying open by clicking 'options' and than 'open' it appears straight away 'System error' message or if you trying do it from the home screen/desktop by clicking on the clock 'System error' message appears straight away.
It is very confusing and driving me mad as this is christmas gift and she can't set up time and date.
I've tried update software using Nokia Software Updater and nothing
I've restored factory setting and nothing as well.
Please help me
Thank You very much for Your time
Kind regards
Martin
Solved!
Go to Solution.

Hi monpar77
If you are using restore factory settings in "Phone management" due to UDP = User Data Preservation feature of this device that may not be sufficient and you may need to carry out a "hard reset" as detailed elsewhere in the forum.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Can I get Quick time video on iPad 2? Specifically, when I receive an email with quicktime on it, it will not play on the iPad.

Can I get Quick time video on iPad 2? Specifically, when I receive an email with quicktime on it, it will not play on the iPad.

Hello. I have AV player hd. When I touch and hold the Quicktime icon that is in a received mail message, a prompt comes up "Open in AVPlayerHD". I click on that and a black screen opens up with the following on it:
1--A red line at the top with a short white slider button on the right hand side. There is a time listed at each end of the red line that says 00:00
2--On the left hand side of the screen, near the middle, there are 4 icons, a colored 'x', a dialogue icon, a circular arrow and an 'i' in a circle.
3--On the right hand side there is a + and a - sign with '1.00x' in the middle of the two.
4--At the bottom of the black screen is a play icon plus forward and fast forward icons.
When I press the play icon it changes to a stop icon.
So, even though I have AV player I cannot play this Quicktime slideshow.
Any help would be appreciated. Thanks.

How can i get Radio buttons and parameters in a Single Straight Line

Hi Experts,
How can i get Radio buttons and parameters in a Single Straight Line...
Example:
   r1 r2 p1 p2.....
Cheers,
Priya
Points granted.

Write the following code for the selection screen:
DECLARATION OF PARAMETERS.
SELECTION-SCREEN: BEGIN OF BLOCK select WITH FRAME TITLE text-001,
                  BEGIN OF LINE.
                  SELECTION-SCREEN COMMENT 1(10) FOR FIELD p_detail.
                  PARAMETERS p_detail RADIOBUTTON GROUP r1 DEFAULT 'X'.
                  SELECTION-SCREEN COMMENT 25(10) FOR FIELD p_summry.
                  PARAMETERS p_summry RADIOBUTTON GROUP r1.
SELECTION-SCREEN: END OF LINE,
                  END OF BLOCK select.
this will solve your poblem surly. reward the points if you find helpful
Regards,
Siddarth

UC320: how to set (correct) time and date, upload own AA messages, get caller ID, telnet?

Hello there,
Just trying out the UC320 I got borrowed from Cisco AT for testing with firmware 2.1.2 (1) localized for Austria.
The device is connected to the cable modem of my ISP (Kabelsignal) utilizing two FXO ports, getting an IP address from my DHCP being connected to a WS-C2960G-24TD (LAN 1@UC320 connected to Gi0/18@C2960G port macro Cisco Switch enabled).
Now I would like to try/see the following features:
- a correct time and date: huh? hwo/where???
No option to set this right??? No NTP option??? Am I just blind or too stupid to find that option/s?
- upload own messages for the AA: ok, there are german messages but someone might have a little bit personalized ones - maybe telling callers the company name before asking them to dial the extension if they know it. Making custom messages is not the problem - but how to upload and in which sound/data format?
- caller ID: my ISP told me that he transfers the caller ID correctly to analoge end devices if caller ID is available and not suppressed. All I can see when a call comes in is which FXO Port is being used by that call. So callback entries on the SPA phone is senseless. Any advise?
- CLI: You can telnet the device - but which credentials to use to successfully logon? The pre-assigned credentials form Cisco AT are not accepted for logon.
BTW @Cisco guys: I am also voting for support for the older SPAs (e.g. 942)

Hi Claus,
Thanks for giving the UC320W a spin and glad you found the support community! Let met see if I can help answer your questions....
Time/Date & NTP -- The UC320W is preconfigured with Cisco's Small Business NTP server. The preferred method for correct time you will need the UC320W WAN to be connected with Internet access. If there is no WAN connectivity there is a feature in the 2.1.x firmware where you can set the time on a SPA phone GUI and it will then update the system time. Alternatively, if you have a LAN side NTP server that is on the same subnet as your Data VLAN subnet, you can use the NTP.pmf file found here: https://supportforums.cisco.com/docs/DOC-16301
Upload custom Music on Hold and Auto Attendant prompt files. We are currently in beta of a new Cloud service. To participate in the Beta, please send an e-mail to [email protected] requesting MoH/AA Custom files Cloud Beta participation.
Caller ID on FXO: Make sure that you have run the impedance matching tool on each of your FXO ports. For additional information on running the Impedance Matching tool and Caller ID troubleshooting, please see the UC320W Troubleshooting Guide.
CLI access -- This is for Cisco Support personnel only for low level debugging. This is not a IOS based device and there is no command line access for provisioning.
Cheers,
Chris

How to get System Time and Date?

Hi, may i know how do i get the System's current Time and Date?? And i need to format them into 2 separate String, that's Time is a String, Date is another String. Pls guide me. Thanks a lot!

What's the problem? The previous example was pretty clear. Just adapt it to your purposes...
        Date currentDateAndTime = new Date();
        SimpleDateFormat dateFormat = new SimpleDateFormat("dd-MM-yyyy");
        SimpleDateFormat timeFormat = new SimpleDateFormat("HH:mm:ss");
        System.out.println(dateFormat.format(currentDateAndTime));
        System.out.println(timeFormat.format(currentDateAndTime));

Can I change incorrect time and date with

Hello,
I used my digital camera in a different time zone and forgot to set it accordingly. Now a bunch of photos have the incorrect time and date. Can I use Photoshop CS4 (11.0.2) to change this? I only found instructions on the Internet for Elements, which I do not have.
Windows Live Photogallery was only mildly successful. In the Windows 7 Explorer the date is shown correctly, but when I go to open the file in Adobe Photoshop, the old, incorrect date is shown. That's why I hoped that I could change this for good with Photoshop.
Thanks in advance!
Aiiyana

There are several dates in the metadata. THe date shot is set by the camera and I know that you can not change that in Bridge. There are programs out there on the web that will do it.

Getting the time and date of when tracks are playing for an honours project

Hi people.
I am in 4th year at Glasgow Caledonian University studying Audio Technology. I am doing an honours project on the classification of contemporary music and what I am looking to do is retrieve information on exactly when tracks are played (time and date) on an iphone using itunes.
I know that last fm time stamps each time a track is played and running this through itunes is an option. Does anyone know of a way to get this information from itunes? I have even tried phoning apple but they say possibly only a third party app which I have had no luck finding.
Thanks for reading.
Gerry Gregory

If I understand you correctly and you want to get this information from tracks being played on an iPhone, one of these might work for you:
http://itunes.apple.com/app/iscrob/id381910892?mt=8
http://itunes.apple.com/us/app/iscrobble-premium/id328295497?mt=8#
Regards.

How to get system time and date with PHP

Dear Mr.Craig,
Thanx a lot. We are running SRM 5.0 (RAMP - Implementation).
My initial requirement is to write a server-side script to display server date and time. Could you give more inside on how to achieve it?
Regards,
Deva.

Perhaps that will help.
[code]
<html>
<h1>Access System time and date</h1>
<?
     // saprfc-class-library
     require_once("saprfc.php");
     $sap = new saprfc(array(
   "logindata"=>array(
   "ASHOST"=>"localhost"          // application server
   ,"SYSNR"=>"00"                    // system number
      ,"CLIENT"=>"000"               // client
      ,"USER"=>"bcuser"               // user
      ,"PASSWD"=>"minisap"          // password
     ,"show_errors"=>false               // let class printout errors
     ,"debug"=>false)) ;                     // detailed debugging information
     $result=$sap->callFunction("MSS_GET_SY_DATE_TIME",
        array(     array("EXPORT","SAPTIME",array()),
           array("EXPORT","SAPDATE",array())));
     if ($sap->getStatus() == SAPRFC_OK) {
    echo "Time: ".$result["SAPTIME"];
    echo "<br>Date: ".$result["SAPDATE"];
    echo "<br>or<br>";
    echo "Server is showing: "
         .substr($result["SAPDATE"], 0, 4)
         ."-".substr($result["SAPDATE"], 4, 2)
         ."-".substr($result["SAPDATE"], 6, 2)
         ." and "
         .substr($result["SAPTIME"], 0, 2)
         .":".substr($result["SAPTIME"], 2, 2)
         .":".substr($result["SAPTIME"], 4, 2);
     } else {
          $sap->printStatus();
     $sap->logoff();
?>
[/code]

What do i do if my apps on my phone wernt working after i upgraded to icloud but backed up my phone,how can i get both contacts and my pictures back?

i downloaded the icloud and backed up my iphone,but my apps were not working,so i went back to my origanal settings on the phone,how can i get my contacts and pictures back?

You deleted the iCloud account?
If so, connect the iPhone to your computer and sync your Contacts and Photos using iTunes.

Can I get both time and date in every single message that I receive or send?

Similar Messages

Maybe you are looking for