Can I get Cisco Jabber 10.6.0 to work on Windows XP Pro SP3?

We are implementing the new Cisco Jabber 10.6.0, per a requirement, but we still have some Windows XP Pro SP3 users. The issue is that with this new client the app will not load due to error: CiscoJabber.exe Entry Point Not Found: the procedure entry point inet_ntop could not be located in the dynamic link library ws2_32.dll.
I understand Windows XP is "not supported", but since we are forced to upgrade to this version I was hoping for a work around for our Windows XP users until they can upgrade to Windows 7.
Anyone have a solution?
Thanks for your time.

Thank you for the suggestion. Here is what I did:
Uninstalled 10.6
Removed all folders and file traces of the install
Tried to install 9.6 - got hung up during install so had to reboot
Tried right-click on exe / uninstall and got message it was only used if installed, so it never really installed even thou I had a broken link to jabber on the desktop
Tried install again. Second attempt was same thing. It gets hung on the windows installer - preparing to install... had to reboot again
Right-click exe / repair and got message it was only used if installed
Removed all folders and file traces of the install
Redownloaded the exe
Same issue, will not install. Hang right after registering product completes.
So i'll be looking into why this is not installing now. :)

Similar Messages

I had to buy a new computer and now can't get my CS3 with CS5 upgrade to work on windows 8.1. What can I do to get them to load and work?

I can load CS3, but it won't let me register it and I can load CS5 upgrade, but when I open CS5 it shows fault and closes. What can I do to get these programs to work on my new computer?

Registration has always been optional, so there is no point in trying. Those pages on the Adobe site are long gone. CS5 crashing is another matter, but without some crash logs and more detailed system information nobody can realyl know. This could be a mundane permissions issue on some files, could be a crash with the hardware acceleration stuff but just the same could be the activation system failing. Impossible to tell based on your limited information.
Mylenium

How can I get my built-in iMac mic to work on Windows 7 (bootcamp)

I've bootcamped my mac so now im running windows 7 ultimate. Im trying to use skype but windows isnt able to find the mic. Was wondering if anyone knew how to connect it?

Read and follow the Boot Camp Help Guides http://www.apple.com/support/bootcamp/
Start Boot Camp Assistant. Check ounly the menu item to download the Windows Support software. Follow the instructions for saving then installing the support software.

How can I get the Creative Cloud Desktop app To work on Windows Vista?

Currently My CC Desktop app is a greyed out icon.
It has been on and off for months now.
I have called technical support several times and been directed to
1) Uninstall it
2) Run the cleaner
3) Turn AV Software off
4) Delet my prefrences
5) Delet Hosts file in Windows 32 folder
6) Restart, Restart,
7) Use a diffent User account. etc.
The apps work= PS, INDD, AE, PROJ, AI, DW, Fla, etc.
But the Creative Cloud Destop app does not. I have to use the web browser to upload or sync any files.
Anyone have any other ideas I welcome them.
My specs,
Running windows vista, on a very good HP machine.
I have been a loyal Adobe Customer, For more than 15 years.
I have been an Adobe Certified Expert for 3 years or more.
I work professionaly with this software as a teacher. I have taught this software to college grads. and now to highschool students.
Ususally Adobe is one of the best companies to deal? Please stop farming your support calls to other countries, The connections are poor, and the support is terrible and it is damaging your reputation.

Hi D2xS-Shooter,
I am afraid Creative Cloud desktop app is not compatible with Windows Vista. If you run into problems there are very limited resources from Adobe to assist.
Creative Cloud is a collection of apps with various different tech specs
http://www.adobe.com/uk/products/creativecloud/tech-specs.html
Thanks!
Eshant

Can't get Cisco to work on my Mac?

I can not get Cisco to work on my Mac OSX 10.9.4
I found this link on someone else's post about this same issue
https://mega.co.nz/#!tlghxQoZ!I0VV1Th9pgiFMQagfG7LbHLvT8xT5uyKo8CrPAX5f9U
Several people said that it worked for them but the last is in 2013 so I'm not sure if its older Mac OS systems
I can down load and install fine but when I go to open it I get this error message
ERROR! cannot write to Info.plist, there are permission problems, or you are on a read-only volume.
This cannot run from within a read-only dmg file.
But when I go to "get info" the program says i have "read and write" permission?
I'm lost and new to Mac, can someone help me please?

The Cisco VPN client is notoriously lousy. Use the built-in Cisco client if at all possible.

I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!

I can't get some song on my iphone they work off of the computer but they wont show up on my phone they are in the "on my iphone" section but they gray and have a gray dotted circle next to them i have tried every thing I just want them on my phone HELP!!!

You have posted to the iTunes Match forum, which your question does not seem to be related to. Is your question concerning iTunes Match or syncing with iTunes via USB?

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I am talking about the Ver 3 download link that came with the purchase email.
That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
/Applications/Aperture.app
/Library/Application Support/Aperture/
~/Library/Application Support/Aperture/
Leonie

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
Please anybody out there that can help!!!??

Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?

How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?
WIndows can't find a better one than the installed LSI Conformed 1394 Hostcontroller

Read and follow the Bootcamp Installation instructions that you were offered to view when you ran Bootcamp Assistant.
Run Bootcamp Assistant again and select the option to download the Bootcamp Support software. Follow the instructions. Then boot into Windows and install the Windows Support software you downloaded and saved.

I have a copy of Final Cut Express 2. Can I get a current upgrade instead of repurchasing the new Final Cut Pro?

I have a old copy of Final Cut Express 2 that I never installed. Can I get a current upgrade instead of repurchasing the new Final Cut Pro?
The Apple Store does not show does not contain purchase information of the old unused Final Cut Express. What can I do to register Final Cut Express 2 will not operate in the current OS systems on my iMac. It only is compatible with the G3 or G5.

If you have a record/documentation of your FCS full version purchase, you can contact Apple here:
https://ssl.apple.com/support/proapps/serialnumbers/
to obtain your serial number.
MtD
Message was edited by: Meg The Dog to fix typo

I can not get the flash player plug in to work with Internet Explorer

I can not get the flash player plug in to work with Internet Explorer

Zoltan71 wrote:
I just bought this computer. My Internet Explorer is version 11.0.1
I have the box checked to Install new version automatically, but it has not done any upgrading.
I can't get the computer to update anything as far as I can see.
The flash plug in does work with the Crome browser but it will not work with Internet explorer.
I looked in the manage add-ons and it says enabled.
I also went into the safety tab and deselected
Active X filtering.
Restarted and still does not work.
I need help.....
Chrome uses a different and separate plug-in.
There are things about IE you need to know, especially 11. Specifically:
"User-Agent Strings"
That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
Microsoft has no plans to "fix" the mess they've created because they think it's a great idea to block you out of the websites you visit.
They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

I've just installed OS 10.6.8. Now I can't get my HP LaserJet 2200 printer to work.

I've just installed OS 10.6.8. Now I can't get my HP LaserJet 2200 printer to work.

Check out the following & do the necessary:
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
HP Support

HT5701 Downloaded Safari 6.0.4 and my software is not up to date to run it. I can not get the old version of Safari to work again.

Downloaded Safari 6.0.4 and my software is not up to date to run it. I can not get the old version of Safari to work again.

Open  > About this Mac, and tell us what OS X version you have. If it's 10.8, reinstall OS X 10.8.3 > http://support.apple.com/kb/DL1640
If, after reinstalling the update, you still can't use Safari, hold Command and R keys while your computer is starting and reinstall Lion or Mountain Lion

Can I get Cisco Jabber 10.6.0 to work on Windows XP Pro SP3?

Similar Messages

Maybe you are looking for