Can I get Garageband to recognize the drum kit channel on my midi keyboard?

I can pull up a large selection of drums on one of the channels which are located on the first 16 white keys of my midi keyboard, unfortunately they aren't accessible like the other midi instruments but are on a channel all on their own. I am using a Keystation 49e from M-Audio. The problem is GB only interfaces with the advanced functions on the keyboard if it's set to channel 2 and the drums are on a separate channel. Also can anyone tell me why Boldt pack volume 3 only produces a sine wave sound? Thanks.

http://www.bulletsandbones.com/GB/GBFAQ.html#midionreal

Similar Messages

  • How can I get iMovie to recognize the external camera?

    iMAC running OSX 10.6.8 recognizes external HD Camera hardware, but iMovie fails to recognize the device.  I can copy files "manually" using Finder, but cannot import them directly into iMovie.  How can I get iMovie to recognize the camera?  I have already re-booted all devices and tried multiple USB ports.  In all cases the OS recognizes the camera, but iMovie does not.

    OK This camcorder is a fine camcorder. I have an earlier model of a similar camcorder from Panasonic. However, this newer model has one problem. It is not compatible with iMovie if you shoot at the highest quality mode, (which is 60P or 50P - which might be called 28MBPS mode). If you shoot 30P or 30i (even 60i) it will import to iMovie. Also, iMovie can handle 1280x720P60 and P50.
    It will definitely work on iMovie 11. It should probably work on iMovie 09. I doubt this camera will be recognized at all on iMovie 08, but it is worth a try. To see which iMovie you have, click iMovie/About and check the version. 9.04 would be iMovie 11. (9.08 is the current version, but it will not run on OSX 10.6.8). 8.06 would be iMovie 09. 7.1.4 would be iMovie 08.
    OK So how to work around this limitation?
    1) If you have Final Cut Pro X ($300) or can justify buying it, it will import 60P and 50P from this camera. However, if this seems a little pricey to you, keep reading.
    2) If you set your camera to record in 1080P30 and shoot a short clip, then iMovie should see the camera. Then I would suggest using iMovie import screen to create a CAMERA ARCHIVE of your camera. This will copy to your Mac the entire contents of the video files on your camera. You will need them later. I am assuming you have some valuable footage on the camera that you would like to have.
    3) Going forward, the simplest thing is to shoot in 1920x1080P30 and use iMovie normally. The biggest advantage of P60 or P50 is when you need really high quality slow motion effects. In other words, after you edit your movie, everything is converted to P30 or P25 anyway.
    4) If you want to retrieve the 1080P50 or 1080P60 clips that you have shot, then there are a couple of apps you can buy to convert them to a form that iMovie can edit. Two such apps are ClipWrap and Voltaic HD. There are also various free apps, but I cannot vouch for them. Do a search on google and you may find some that work.

  • My I phone 3GS keeps saying no sim.  How can I get it to recognize the SIM card?

    My iPhone keeps saying No SIM.  How can I get it to recognize the SIM card?

    TRy removing the sim card wipe it clean then insert it again. Your sim card tray might be dusty. Another option is turning your airplane mode on and off.
    btw, is your network signal strong in the area where you are currently? Ask ATT  if there  is any area outage

  • I can't get Thunderbird to recognize the password to the gmail account I am trying to add.

    I am trying to add a gmail account to Thunderbird that is already hosting several gmail accounts. No matter what I do, I can't get Thunderbird to recognize the password. I admit, I got is wrong a few times, but I did get the right one, and it was typed in perfectly several times, as well as copy and pasted. The password worked fine to log into the account directly, but not into Thunderbird. I tried changing the password, and that did not work either. I have tried adding this account in Windows 8.1 as well as Ubuntu 14.04, and the results have been the same. In Ubuntu, I tried adding another account I needed added, and that went without a hitch. The only think I can think of is the address I am trying to add is linked to a email address for a website being transferred to me that is hosted by Yahoo and its business mail. I tried adding the yahoo account directly, but I add the same issues with passwords, but I suspect most of you know that is because Yahoo is simply sucking more and more in an attempt to become irrelevant.

    I cannot believe the swiftness of your the help on this forum, within seconds you guys fixed the problem, and the account was added with no further issues. The people on this forum rock!!!!!
    I am now beginning to suspect it indeed had to do with that first lot of wrong passwords.

  • How can I get iTunes to recognize the apps that are missing from the library screen but still on the machine??

    My apps are not showing-up in the iTunes library but they are present in the apps folder. How can I get iTunes to recognize their presence?
    Library-Apps-All (only three of several hundred appear).
    Apps are still present in Users-Music-Mobile Applications
    I am running iTunes 11.0, OS X 10.8.2 on a Mac Pro. 
    Ran Disk Utility, Techtool, Disk Warrior and then reinstalled Mountain Lion, updated it and repaired permissions. No change.
    There is a file that says 'iTunes Library (damaged), which is the iTunes Database file. How can that file be re-created?
    Any technical help on replacing that file with a new, fresh one would be appreciated!

    It has always been very basic to maintain a backup of media and other important files.  If you chose to reinstall the OS without having a backup, well that just is not smart.
    If you are in the US and running iTunes 10.3 or later, iTunes purchases can be redownloaded via iCloud.  Simply log into the iTunes store, select purchases, purchase history and redownload the content.
    If you are not in the US.... well, seems you just learned and important and possibly expensive lesson.

  • ITunes Media And Removable Storage Issue - Can't Get iTunes to recognize the new location.  Any tips?

    I've had my iTunes media on an external HDD for years.  Let's call this drive B.
    My iTunes library and xml file reside on my Mac HDD.
    I decided that I wanted to buy a bigger HDD and move all of the media to it.  Last night I copied all of the media files to the new HDD (let's call it P) from B.  I also copied the iTunes folder from my Mac HDD to P and directed iTunes to look for the media in the Advanced settings.
    Of course when I launched iTunes after all the hours it took to do all of this copying, it could not find any of the media on P without asking whether I wanted to locate it - and the library was full of explanation points.  When I examined the info on a few songs, it was showing that all of the media was still pointing to B as the location with the complete directory structure pointing to that old location - and not to the new drive.
    I tried creating a new library and still could not get the library to recognize that all of the media was now on P instead of B.
    I remember when I did something similar years ago, I just changed the location in iTunes in the Advanced settings and iTunes realized that all of the music was on B instead of its prior location.
    I finally gave up and restored things back to the original settings with all the media on B.
    I did a lot of searches and followed everything explicitly -- which basically meant copying the iTunes folder (with the library and xml files within it), and the media to the new drive and then telling iTunes where the new location was.  To me it shouldn't be any simpler than that to get iTunes to recognize a new location for all the music.
    Can anyone offer a more rudimentary breakdown of things for me to try so that I can get iTunes to acknowledge that all the media is on P and not B?
    P is larger than B  for those of you who are wondering why I'm trying to get this to work. And P also will be a drive that dedicated to iTunes and media and nothing else.  Unlike B, which has all kinds of assorted files on it along with my music, etc.
    And yes, each time I made changes  - I restarted iTunes

    Thank you both for the information. 
    It sounds like I did something out of sequence based upon reading the split library information, thinking I was doing the right thing.
    This is exactly what I did
    I copied the folder with all the media from B to P
    I copied the entire iTunes folder from the Mac HDD to P
    I option click started iTunes and connected to the library file and when iTunes opened it was OK - and looked like it normally does when I was still using B as the storage
    I connected to P
    When it didn't work, I tried to create a new library and did the same exact things.
    So let me ask this:
    Should I hook up P again and delete everything off of it except for the folders that have the media in them and then copy the current iTunes folder over onto P again - and then copy all of the media from it's current location into the iTunes Media folder inside of the iTunes folder I copy over from the Mac and then try to connect and consolidate everything?
    I assume that if I move everything from the current media folder into the iTunes/iTunes Media/ that I copy over everything will be under the iTunes umbrella as if things were never split?
    I don't seem to recall it being this difficult when I originally set up things on B, as it was a split situation then too, if I'm not mistaken.
    I really appreciate the instruction.  And honestly it does make sense to have everything in one location to prevent problems like this from happening  - it would just be great if iTunes had a feature that moved and/or copied the necessary files to the new location to prevent splitting links

  • I can't get Itunes to recognize the oldest backup I have on my PC

    So basically I lost photos and contacts during iOS 5 update. I messed up by doing a complete restore trying to get everything back but accidentally unplugged my phone while it was restoring the firmware. So I went under the appdata file/mobilesync/backups and found a back up that has 1006 files in it. Im assuming its the backup with all of my old media because the other 2 backups only have 82 files in it. (I should note that its not a really old back up, they were only created minutes apart) So I tried to restore from backup on itunes but iTunes isn't recognizing the older backup folder. How do I get iTunes to recognize old backups?

    Make sure that your Quicktime is up to date with at least v7.1.5.
    The video needs to be in a format that can be played on the iPod. You can use Handbrake or iSquint as well as iTunes to do the conversion from the Advanced menu in iTunes.
    MJ

  • How can I get more freedom from the drum sounds?

    I am looking for a more free, less repetative sound. Before I venture to purchase an external kit or drum software I wanted to first see if there was a way to maximize my freedom within garage band itself. is there any way I can program the built-in keyboard to play drum sounds automatically as hit the key or does it have to be a tiresome process of recording each individual drum sound and then somehow making them all work together in a loop? The latter sounds like a no option option.

    To add to the above question. What I am asking is if there is a way, through the built in keyboard, to make many drum sounds coalesce together in sort of the same way as you could on a drum machine. And then I would record this coalescing of sounds and use them as the drum sound for the song.

  • HT201210 My iphone had an error while updating. Now it is stuck with a picture of  a usb cable & an arrow pointing to the itunes logo. I can`t get itunes to recognize the device

    I just bought my iphon last night & tried doing it`s first update this morning. I got an error message that the update failed & now my iphone only shows a pic of a usb cable with an arrow pointing to the itunes logo.
    I already tried holding down the on off buton & the home button like the instructions say. Problem is that when the instructions say I should be at the part where itunes is again recognizing my iphone, my itune is not recognizing my iphone. So I am stuck. I follow the instrustions, but the resluts are different, so I can`t continue to the next step. Very frustrated, as the nearest Apple store is over an hour`s drive away.

    Open iTunes on computer. Connect iPhone to computer. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the Firmware. If the process Errors again, write down the error message and error #, on paper so you can solve the problem. If there are serious problems, all iPhone 4S have full warranty coverage with Apple.

  • HT1386 It says that I can be recognized on up to 5 computer.  Well I don't have any of those computers any more.  How can I get it to recognize the new computer that I am on?

    I need some help on being able to sync my computer with my Iphone.  It says I can do up to 5 computers and that I already have my limit.  Well I have a new computer and don't have any of those 5 computers any more.  What can I do?

    If you don't have any of those computers you will have to email iTunes store support to reset your account. If you have just one of them, open iTunes, go to the Store menu, and choose to deauthorize all computers on the account.

  • HT5019 If my second display is not showing up on the graphics display window, yet the second display is showing a mirror image, how can I get it to recognize the second display and allow me to setup extended desktop?

    I'm running 10.9.2 on a Power Mac from 2013.  I am using two identical HP monitors.  I have a Y adapter to connect the monitors.  Which I'm guessing means the computer is only seeing one display since there is only one display output. 

    There are no PowerMacs from 2013.   The desktop tower from 2006 on got named Mac Pro.    The problem is probably the Y adapter.    You need a videocard with two display ports, or two videocards to be able to make an extended desktop from one to the other.  If you gave us the Y adapter make and model, we could tell if it supports screen spanning or not.

  • After OS clean install I can't get iTunes to recognize library on external drive

    I have a Mac Pro that had an SSD boot drive and a separate hard drive that contains my iTunes Library and Media files.  Because of problems with my boot drive I erased the SSD and did a clean install of Mavericks.  Now I can't get iTunes to recognize the iTunes Media files on the hard drive.  I've gone to Preferences/Advanced in iTunes and changed the "iTunes Media folder location" to point to the hard drive with the iTunes data on it.  Nothing happens when I do this. No dialogs. Nothing.  I've trashed iTunes preferences to no avail.  I don't know what to do to fix this or troubleshoot it.  Any help will be greatly appreciated.
    John

    John Baughman wrote:
    Now I can't get iTunes to recognize the iTunes Media files on the hard drive.  I've gone to Preferences/Advanced in iTunes and changed the "iTunes Media folder location" to point to the hard drive with the iTunes data on it.  Nothing happens when I do this.
    Nothing should happen when you do this. This simply tells iTunes where to put anything you add after this. It doens't tell iTunes where anything already in iTunes is located.
    Hold Option, launch iTunes, select Choose library... and select the iTunes folder on the hard drive.

  • How can I get iMac to recognize Canon Pixma mp990 printer wirelessly?

    Although my Canon Pixma MP990 printer/scanner shows I've properly set it up for wifi, and the blue wifi light illuminates on the printer, my iMac now refuses to recognize that my printer is connected. Imac now shows the printer as offline.  When the printer was set up for corded/wired connection, the Imac worked fine with it. How can I get iMac to recognize the wireless printer setup? Thanks!

    Hi ..
    Click here >  Canon U.S.A. : Support & Drivers : PIXMA MP990
    Then click  Wireless Help
    Make sure the printer is recognized in System Preferences > Print & Scan > Print
    If not, download and install the drivers designated for the mp990 model.
    In the System Preferences > Print & Scan > Print window, click + (plus) to add the printer.

  • How can I get Skype to recognize camera on MacBook Air?

    How can I get Skype to recognize the camera on my MacBook Air?    It recognized it until last week.  (Is Apple working 24/7 to fix this irritating problem?)

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    From Apple:
    MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update
    update resolution coming soon

  • Can't get ADE to recognize my Kindle

    I had seen some other similar forums and tried those tricks. I have the same Adobe ID as the id on the Kindle. I try and everytime I start ADE it just sits there. How can I get it to recognize the device?

    Maybe you should hold up the Kindle in front of the camera?
    Humor aside, Kindles aren't supported by ADE.  Sorry!
    ===============

Maybe you are looking for